This reverts commit 08ece5bb.

As it breaks ARM builds and needs more attention
on the ARM side.
Acked-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Passing a freed 'pages' to free_xenballooned_pages will end badly
on kernels with slub debug enabled.

This looks out of place between the rc assign and the check, but
we do want to kfree pages regardless of which path we take.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Current xen-selfballoon driver is too aggressive which may cause OOM be
triggered more often. Eg. this bug reported by James:
https://lkml.org/lkml/2013/11/21/158

There are two mainly reasons:
1) The original goal_page didn't consider some pages used by kernel space, like
slab pages and pages used by device drivers.

2) The balloon driver may not give back memory to guest OS fast enough when the
workload suddenly aquries a lot of physical memory.

In both cases, the guest OS will suffer from memory pressure and OOM may
be triggered.

The fix is make xen-selfballoon driver not that aggressive by adding extra 10%
of total ram pages to goal_page.
It's more valuable to keep the guest system reliable and response faster than
balloon out these 10% pages to XEN.
Signed-off-by: NBob Liu <bob.liu@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The grant mapping API does m2p_override unnecessarily: only gntdev needs it,
for blkback and future netback patches it just cause a lock contention, as
those pages never go to userspace. Therefore this series does the following:
- the original functions were renamed to __gnttab_[un]map_refs, with a new
  parameter m2p_override
- based on m2p_override either they follow the original behaviour, or just set
  the private flag and call set_phys_to_machine
- gnttab_[un]map_refs are now a wrapper to call __gnttab_[un]map_refs with
  m2p_override false
- a new function gnttab_[un]map_refs_userspace provides the old behaviour

It also removes a stray space from page.h and change ret to 0 if
XENFEAT_auto_translated_physmap, as that is the only possible return value
there.

v2:
- move the storing of the old mfn in page->index to gnttab_map_refs
- move the function header update to a separate patch

v3:
- a new approach to retain old behaviour where it needed
- squash the patches into one

v4:
- move out the common bits from m2p* functions, and pass pfn/mfn as parameter
- clear page->private before doing anything with the page, so m2p_find_override
  won't race with this

v5:
- change return value handling in __gnttab_[un]map_refs
- remove a stray space in page.h
- add detail why ret = 0 now at some places

v6:
- don't pass pfn to m2p* functions, just get it locally
Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com>
Suggested-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

On ARM, address size can be 32 bits or 64 bits (if CONFIG_ARCH_PHYS_ADDR_T_64BIT
is enabled).
We can't assume that the grant frame base address will always fits in an
unsigned long. Use phys_addr_t instead of unsigned long as argument for
gnttab_setup_auto_xlat_frames.
Signed-off-by: NJulien Grall <julien.grall@linaro.org>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>

The use of phys_to_machine and machine_to_phys in the phys<=>bus conversions
causes us to lose the top bits of the DMA address if the size of a DMA address is not the same as the size of the phyiscal address.

This can happen in practice on ARM where foreign pages can be above 4GB even
though the local kernel does not have LPAE page tables enabled (which is
totally reasonable if the guest does not itself have >4GB of RAM). In this
case the kernel still maps the foreign pages at a phys addr below 4G (as it
must) but the resulting DMA address (returned by the grant map operation) is
much higher.

This is analogous to a hardware device which has its view of RAM mapped up
high for some reason.

This patch makes I/O to foreign pages (specifically blkif) work on 32-bit ARM
systems with more than 4GB of RAM.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Event channels driver needs to be initialized very early. Until now, Xen
initialization was done after all CPUs was bring up.

We can safely move the initialization to an early initcall.

Also use a cpu notifier to:
    - Register the VCPU when the CPU is prepared
    - Enable event channel IRQ when the CPU is running
Signed-off-by: NJulien Grall <julien.grall@linaro.org>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

otherwise we will get for some user-space applications
that use 'clone' with CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID
end up hitting an assert in glibc manifested by:

general protection ip:7f80720d364c sp:7fff98fd8a80 error:0 in
libc-2.13.so[7f807209e000+180000]

This is due to the nature of said operations which sets and clears
the PID.  "In the successful one I can see that the page table of
the parent process has been updated successfully to use a
different physical page, so the write of the tid on
that page only affects the child...

On the other hand, in the failed case, the write seems to happen before
the copy of the original page is done, so both the parent and the child
end up with the same value (because the parent copies the page after
the write of the child tid has already happened)."
(Roger's analysis). The nature of this is due to the Xen's commit
of 51e2cac257ec8b4080d89f0855c498cbbd76a5e5
"x86/pvh: set only minimal cr0 and cr4 flags in order to use paging"
the CR0_WP was removed so COW features of the Linux kernel were not
operating properly.

While doing that also update the rest of the CR0 flags to be inline
with what a baremetal Linux kernel would set them to.

In 'secondary_startup_64' (baremetal Linux) sets:

X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | X86_CR0_NE | X86_CR0_WP |
X86_CR0_AM | X86_CR0_PG

The hypervisor for HVM type guests (which PVH is a bit) sets:
X86_CR0_PE | X86_CR0_ET | X86_CR0_TS
For PVH it specifically sets:
X86_CR0_PG

Which means we need to set the rest: X86_CR0_MP | X86_CR0_NE  |
X86_CR0_WP | X86_CR0_AM to have full parity.
Signed-off-by: NRoger Pau Monne <roger.pau@citrix.com>
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v1: Took out the cr4 writes to be a seperate patch]
[v2: 0-DAY kernel found xen_setup_gdt to be missing a static]

Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The usage of 'select' means it will enable the CONFIG
options without checking their dependencies. That meant
we would inadvertently turn on CONFIG_XEN_PVHM while its
core dependency (CONFIG_PCI) was turned off.

This patch fixes the warnings and compile failures:

warning: (XEN_PVH) selects XEN_PVHVM which has unmet direct
dependencies (HYPERVISOR_GUEST && XEN && PCI && X86_LOCAL_APIC)
Reported-by: NJim Davis <jim.epost@gmail.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Commit 1fe56551 ("xen/events: use
the FIFO-based ABI if available") added new instances of __cpuinit
macro usage.

We removed this a couple versions ago; we now want to remove
the compat no-op stubs.  Introducing new users is not what
we want to see at this point in time, as it will break once
the stubs are gone.

Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There is no reasons why an HVM guest shouldn't be allowed to use xenfb.
As a matter of fact ARM guests, HVM from Linux POV, can use xenfb.
Given that no Xen toolstacks configure a xenfb backend for x86 HVM
guests, they are not affected.

Please note that at this time QEMU needs few outstanding fixes to
provide xenfb on ARM:

http://marc.info/?l=qemu-devel&m=138739419700837&w=2Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NDavid Vrabel <david.vrabel@citrix.com>
CC: boris.ostrovsky@oracle.com
CC: plagnioj@jcrosoft.com
CC: tomi.valkeinen@ti.com
CC: linux-fbdev@vger.kernel.org
CC: konrad.wilk@oracle.com
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Fix to return -ENOMEM from the error handling case instead of
0 (overwrited to 0 by the HYPERVISOR_event_channel_op call),
otherwise the error condition cann't be reflected from the
return value.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>

Fix to return a negative error code from the error handling
case instead of 0, otherwise the error condition cann't be
reflected from the return value.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Remove duplicated include.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Oddly enough it compiles for my ancient compiler but with
the supplied .config it does blow up. Fix is easy enough.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Reported-by: NJim Davis <jim.epost@gmail.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NJan Beulich <JBeulich@suse.com>

We have the framework to use v2, but there are no backends that
actually use it. The end result is that on PV we use v2 grants
and on PVHVM v1. The v1 has a capacity of 512 grants per page while
the v2 has 256 grants per page. This means we lose about 50%
capacity - and if we want more than 16 VIFs (each VIF takes
512 grants), then we are hitting the max per guest of 32.

Oracle-bug: 16039922
CC: annie.li@oracle.com
CC: msw@amazon.com
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>

PVH allows PV linux guest to utilize hardware extended capabilities,
such as running MMU updates in a HVM container.

The Xen side defines PVH as (from docs/misc/pvh-readme.txt,
with modifications):

"* the guest uses auto translate:
 - p2m is managed by Xen
 - pagetables are owned by the guest
 - mmu_update hypercall not available
* it uses event callback and not vlapic emulation,
* IDT is native, so set_trap_table hcall is also N/A for a PVH guest.

For a full list of hcalls supported for PVH, see pvh_hypercall64_table
in arch/x86/hvm/hvm.c in xen.  From the ABI prespective, it's mostly a
PV guest with auto translate, although it does use hvm_op for setting
callback vector."

Use .ascii and .asciz to define xen feature string. Note, the PVH
string must be in a single line (not multiple lines with \) to keep the
assembler from putting null char after each string before \.
This patch allows it to be configured and enabled.

We also use introduce the 'XEN_ELFNOTE_SUPPORTED_FEATURES' ELF note to
tell the hypervisor that 'hvm_callback_vector' is what the kernel
needs. We can not put it in 'XEN_ELFNOTE_FEATURES' as older hypervisor
parse fields they don't understand as errors and refuse to load
the kernel. This work-around fixes the problem.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

PVH is a PV guest with a twist - there are certain things
that work in it like HVM and some like PV. For the XenBus
mechanism we want to use the PVHVM mechanism.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

In PVH the shared grant frame is the PFN and not MFN,
hence its mapped via the same code path as HVM.

The allocation of the grant frame is done differently - we
do not use the early platform-pci driver and have an
ioremap area - instead we use balloon memory and stitch
all of the non-contingous pages in a virtualized area.

That means when we call the hypervisor to replace the GMFN
with a XENMAPSPACE_grant_table type, we need to lookup the
old PFN for every iteration instead of assuming a flat
contingous PFN allocation.

Lastly, we only use v1 for grants. This is because PVHVM
is not able to use v2 due to no XENMEM_add_to_physmap
calls on the error status page (see commit
69e8f430
 xen/granttable: Disable grant v2 for HVM domains.)

Until that is implemented this workaround has to
be in place.

Also per suggestions by Stefano utilize the PVHVM paths
as they share common functionality.

v2 of this patch moves most of the PVH code out in the
arch/x86/xen/grant-table driver and touches only minimally
the generic driver.

v3, v4: fixes us some of the code due to earlier patches.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

The 'xen_hvm_resume_frames' used to be an 'unsigned long'
and contain the virtual address of the grants. That was OK
for most architectures (PVHVM, ARM) were the grants are contiguous
in memory. That however is not the case for PVH - in which case
we will have to do a lookup for each virtual address for the PFN.

Instead of doing that, lets make it a structure which will contain
the array of PFNs, the virtual address and the count of said PFNs.

Also provide a generic functions: gnttab_setup_auto_xlat_frames and
gnttab_free_auto_xlat_frames to populate said structure with
appropriate values for PVHVM and ARM.

To round it off, change the name from 'xen_hvm_resume_frames' to
a more descriptive one - 'xen_auto_xlat_grant_frames'.

For PVH, in patch "xen/pvh: Piggyback on PVHVM for grant driver"
we will populate the 'xen_auto_xlat_grant_frames' by ourselves.

v2 moves the xen_remap in the gnttab_setup_auto_xlat_frames
and also introduces xen_unmap for gnttab_free_auto_xlat_frames.
Suggested-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v3: Based on top of 'asm/xen/page.h: remove redundant semicolon']
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

We have this odd scenario of where for PV paths we take a shortcut
but for the HVM paths we first ioremap xen_hvm_resume_frames, then
assign it to gnttab_shared.addr. This is needed because gnttab_map
uses gnttab_shared.addr.

Instead of having:
	if (pv)
		return gnttab_map
	if (hvm)
		...

	gnttab_map

Lets move the HVM part before the gnttab_map and remove the
first call to gnttab_map.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

The function gnttab_max_grant_frames() returns the maximum amount
of frames (pages) of grants we can have. Unfortunatly it was
dependent on gnttab_init() having been run before to initialize
the boot max value (boot_max_nr_grant_frames).

This meant that users of gnttab_max_grant_frames would always
get a zero value if they called before gnttab_init() - such as
'platform_pci_init' (drivers/xen/platform-pci.c).
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

PVH is a PV guest with a twist - there are certain things
that work in it like HVM and some like PV. There is
a similar mode - PVHVM where we run in HVM mode with
PV code enabled - and this patch explores that.

The most notable PV interfaces are the XenBus and event channels.

We will piggyback on how the event channel mechanism is
used in PVHVM - that is we want the normal native IRQ mechanism
and we will install a vector (hvm callback) for which we
will call the event channel mechanism.

This means that from a pvops perspective, we can use
native_irq_ops instead of the Xen PV specific. Albeit in the
future we could support pirq_eoi_map. But that is
a feature request that can be shared with PVHVM.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

In xen_add_extra_mem() we can skip updating P2M as it's managed
by Xen. PVH maps the entire IO space, but only RAM pages need
to be repopulated.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

The VCPU bringup protocol follows the PV with certain twists.
From xen/include/public/arch-x86/xen.h:

Also note that when calling DOMCTL_setvcpucontext and VCPU_initialise
for HVM and PVH guests, not all information in this structure is updated:

 - For HVM guests, the structures read include: fpu_ctxt (if
 VGCT_I387_VALID is set), flags, user_regs, debugreg[*]

 - PVH guests are the same as HVM guests, but additionally use ctrlreg[3] to
 set cr3. All other fields not used should be set to 0.

This is what we do. We piggyback on the 'xen_setup_gdt' - but modify
a bit - we need to call 'load_percpu_segment' so that 'switch_to_new_gdt'
can load per-cpu data-structures. It has no effect on the VCPU0.

We also piggyback on the %rdi register to pass in the CPU number - so
that when we bootup a new CPU, the cpu_bringup_and_idle will have
passed as the first parameter the CPU number (via %rdi for 64-bit).
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

During early bootup we start life using the Xen provided
GDT, which means that we are running with %cs segment set
to FLAT_KERNEL_CS (FLAT_RING3_CS64 0xe033, GDT index 261).

But for PVH we want to be use HVM type mechanism for
segment operations. As such we need to switch to the HVM
one and also reload ourselves with the __KERNEL_CS:eip
to run in the proper GDT and segment.

For HVM this is usually done in 'secondary_startup_64' in
(head_64.S) but since we are not taking that bootup
path (we start in PV - xen_start_kernel) we need to do
that in the early PV bootup paths.

For good measure we also zero out the %fs, %ds, and %es
(not strictly needed as Xen has already cleared them
for us). The %gs is loaded by 'switch_to_new_gdt'.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>

For PVHVM the shared_info structure is provided via the same way
as for normal PV guests (see include/xen/interface/xen.h).

That is during bootup we get 'xen_start_info' via the %esi register
in startup_xen. Then later we extract the 'shared_info' from said
structure (in xen_setup_shared_info) and start using it.

The 'xen_setup_shared_info' is all setup to work with auto-xlat
guests, but there are two functions which it calls that are not:
xen_setup_mfn_list_list and xen_setup_vcpu_info_placement.
This patch modifies the P2M code (xen_setup_mfn_list_list)
while the "Piggyback on PVHVM for event channels" modifies
the xen_setup_vcpu_info_placement.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We also optimize one - the TLB flush. The native operation would
needlessly IPI offline VCPUs causing extra wakeups. Using the
Xen one avoids that and lets the hypervisor determine which
VCPU needs the TLB flush.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

.. which are surprisingly small compared to the amount for PV code.

PVH uses mostly native mmu ops, we leave the generic (native_*) for
the majority and just overwrite the baremetal with the ones we need.

At startup, we are running with pre-allocated page-tables
courtesy of the tool-stack. But we still need to graft them
in the Linux initial pagetables. However there is no need to
unpin/pin and change them to R/O or R/W.

Note that the xen_pagetable_init due to 7836fec9d0994cc9c9150c5a33f0eb0eb08a335a
"xen/mmu/p2m: Refactor the xen_pagetable_init code." does not
need any changes - we just need to make sure that xen_post_allocator_init
does not alter the pvops from the default native one.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Stefano noticed that the code runs only under 64-bit so
the comments about 32-bit are pointless.

Also we change the condition for xen_revector_p2m_tree
returning the same value (because it could not allocate
a swath of space to put the new P2M in) or it had been
called once already. In such we return early from the
function.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

The revectoring and copying of the P2M only happens when
!auto-xlat and on 64-bit builds. It is not obvious from
the code, so lets have seperate 32 and 64-bit functions.

We also invert the check for auto-xlat to make the code
flow simpler.
Suggested-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

P2M is not available for PVH. Fortunatly for us the
P2M code already has mostly the support for auto-xlat guest thanks to
commit 3d24bbd7
"grant-table: call set_phys_to_machine after mapping grant refs"
which: "
introduces set_phys_to_machine calls for auto_translated guests
(even on x86) in gnttab_map_refs and gnttab_unmap_refs.
translated by swiotlb-xen... " so we don't need to muck much.

with above mentioned "commit you'll get set_phys_to_machine calls
from gnttab_map_refs and gnttab_unmap_refs but PVH guests won't do
anything with them " (Stefano Stabellini) which is OK - we want
them to be NOPs.

This is because we assume that an "IOMMU is always present on the
plaform and Xen is going to make the appropriate IOMMU pagetable
changes in the hypercall implementation of GNTTABOP_map_grant_ref
and GNTTABOP_unmap_grant_ref, then eveything should be transparent
from PVH priviligied point of view and DMA transfers involving
foreign pages keep working with no issues[sp]

Otherwise we would need a P2M (and an M2P) for PVH priviligied to
track these foreign pages .. (see arch/arm/xen/p2m.c)."
(Stefano Stabellini).

We still have to inhibit the building of the P2M tree.
That had been done in the past by not calling
xen_build_dynamic_phys_to_machine (which setups the P2M tree
and gives us virtual address to access them). But we are missing
a check for xen_build_mfn_list_list - which was continuing to setup
the P2M tree and would blow up at trying to get the virtual
address of p2m_missing (which would have been setup by
xen_build_dynamic_phys_to_machine).

Hence a check is needed to not call xen_build_mfn_list_list when
running in auto-xlat mode.

Instead of replicating the check for auto-xlat in enlighten.c
do it in the p2m.c code. The reason is that the xen_build_mfn_list_list
is called also in xen_arch_post_suspend without any checks for
auto-xlat. So for PVH or PV with auto-xlat - we would needlessly
allocate space for an P2M tree.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

We don't use the filtering that 'xen_cpuid' is doing
because the hypervisor treats 'XEN_EMULATE_PREFIX' as
an invalid instruction. This means that all of the filtering
will have to be done in the hypervisor/toolstack.

Without the filtering we expose to the guest the:

 - cpu topology (sockets, cores, etc);
 - the APERF (which the generic scheduler likes to
    use), see  5e626254
    "xen/setup: filter APERFMPERF cpuid feature out"
 - and the inability to figure out whether MWAIT_LEAF
   should be exposed or not. See
   df88b2d9
   "xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded."
 - x2apic, see  4ea9b9ac
   "xen: mask x2APIC feature in PV"

We also check for vector callback early on, as it is a required
feature. PVH also runs at default kernel IOPL.

Finally, pure PV settings are moved to a separate function that are
only called for pure PV, ie, pv with pvmmu. They are also #ifdef
with CONFIG_XEN_PVMMU.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Which is a PV guest with auto page translation enabled
and with vector callback. It is a cross between PVHVM and PV.

The Xen side defines PVH as (from docs/misc/pvh-readme.txt,
with modifications):

"* the guest uses auto translate:
 - p2m is managed by Xen
 - pagetables are owned by the guest
 - mmu_update hypercall not available
* it uses event callback and not vlapic emulation,
* IDT is native, so set_trap_table hcall is also N/A for a PVH guest.

For a full list of hcalls supported for PVH, see pvh_hypercall64_table
in arch/x86/hvm/hvm.c in xen.  From the ABI prespective, it's mostly a
PV guest with auto translate, although it does use hvm_op for setting
callback vector."

Also we use the PV cpuid, albeit we can use the HVM (native) cpuid.
However, we do have a fair bit of filtering in the xen_cpuid and
we can piggyback on that until the hypervisor/toolstack filters
the appropiate cpuids. Once that is done we can swap over to
use the native one.

We setup a Kconfig entry that is disabled by default and
cannot be enabled.

Note that on ARM the concept of PVH is non-existent. As Ian
put it: "an ARM guest is neither PV nor HVM nor PVHVM.
It's a bit like PVH but is different also (it's further towards
the H end of the spectrum than even PVH).". As such these
options (PVHVM, PVH) are never enabled nor seen on ARM
compilations.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Most of the functions in page.h are prefaced with
	if (xen_feature(XENFEAT_auto_translated_physmap))
		return mfn;

Except the mfn_to_local_pfn. At a first sight, the function
should work without this patch - as the 'mfn_to_mfn' has
a similar check. But there are no such check in the
'get_phys_to_machine' function - so we would crash in there.

This fixes it by following the convention of having the
check for auto-xlat in these static functions.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Implement all the event channel port ops for the FIFO-based ABI.

If the hypervisor supports the FIFO-based ABI, enable it by
initializing the control block for the boot VCPU and subsequent VCPUs
as they are brought up and on resume.  The event array is expanded as
required when event ports are setup.

The 'xen.fifo_events=0' command line option may be used to disable use
of the FIFO-based ABI.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

Commit bee980d9 (xen/events: Handle VIRQ_TIMER before any other hardirq
in event loop) effectively made the VIRQ_TIMER the highest priority event
when using the 2-level ABI.

Set the VIRQ_TIMER priority to the highest so this behaviour is retained
when using the FIFO-based ABI.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

Add xen_irq_set_priority() to set an event channels priority.  This function
will only work with event channel ABIs that support priority (i.e., the
FIFO-based ABI).
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>