- 08 2月, 2008 4 次提交
-
-
由 Hugh Dickins 提交于
This patch reinstates the "swapoff: scan ptes preemptibly" mod we started with: in due course it should be rendered down into the earlier patches, leaving us with a more straightforward mem_cgroup_charge mod to unuse_pte, allocating with GFP_KERNEL while holding no spinlock and no atomic kmap. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Pavel Emelianov <xemul@openvz.org> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Balbir Singh 提交于
Nick Piggin pointed out that swap cache and page cache addition routines could be called from non GFP_KERNEL contexts. This patch makes the charging routine aware of the gfp context. Charging might fail if the cgroup is over it's limit, in which case a suitable error is returned. This patch was tested on a Powerpc box. I am still looking at being able to test the path, through which allocations happen in non GFP_KERNEL contexts. [kamezawa.hiroyu@jp.fujitsu.com: problem with ZONE_MOVABLE] Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Balbir Singh 提交于
Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
This patch precisely reverts the "swapoff: scan ptes preemptibly" patch just presented. It's a temporary measure to allow existing memory controller patches to apply without rejects: in due course they should be rendered down into one sensible patch, and this reversion disappear. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 2月, 2008 4 次提交
-
-
由 Hugh Dickins 提交于
There are a couple of reasons (patches follow) why it would be good to open a window for sleep in shmem_unuse_inode, between its search for a matching swap entry, and its handling of the entry found. shmem_unuse_inode must then use igrab to hold the inode against deletion in that window, and its corresponding iput might result in deletion: so it had better unlock_page before the iput, and might as well release the page too. Nor is there any need to hold on to shmem_swaplist_mutex once we know we'll leave the loop. So this unwinding moves from try_to_unuse and shmem_unuse into shmem_unuse_inode, in the case when it finds a match. Let try_to_unuse break on error in the shmem_unuse case, as it does in the unuse_mm case: though at this point in the series, no error to break on. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Provided that CONFIG_HIGHPTE is not set, unuse_pte_range can reduce latency in swapoff by scanning the page table preemptibly: so long as unuse_pte is careful to recheck that entry under pte lock. (To tell the truth, this patch was not inspired by any cries for lower latency here: rather, this restructuring permits a future memory controller patch to allocate with GFP_KERNEL in unuse_pte, where before it could not. But it would be wrong to tuck this change away inside a memcgroup patch.) Signed-off-by: NHugh Dickins <hugh@veritas.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Tested-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
valid_swaphandles is supposed to do a quick pass over the swap map entries neigbouring the entry which swapin_readahead is targetting, to determine for it a range worth reading all together. But since it always starts its search from the beginning of the swap "cluster", a reject (free entry) there immediately curtails the readaround, and every swapin_readahead from that cluster is for just a single page. Instead scan forwards and backwards around the target entry. Use better names for some variables: a swap_info pointer is usually called "si" not "swapdev". And at the end, if only the target page should be read, return count of 0 to disable readaround, to avoid the unnecessarily repeated call to read_swap_cache_async. Signed-off-by: NHugh Dickins <hugh@veritas.com> Acked-by: NRik van Riel <riel@surriel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Building in a filesystem on a loop device on a tmpfs file can hang when swapping, the loop thread caught in that infamous throttle_vm_writeout. In theory this is a long standing problem, which I've either never seen in practice, or long ago suppressed the recollection, after discounting my load and my tmpfs size as unrealistically high. But now, with the new aops, it has become easy to hang on one machine. Loop used to grab_cache_page before the old prepare_write to tmpfs, which seems to have been enough to free up some memory for any swapin needed; but the new write_begin lets tmpfs find or allocate the page (much nicer, since grab_cache_page missed tmpfs pages in swapcache). When allocating a fresh page, tmpfs respects loop's mapping_gfp_mask, which has __GFP_IO|__GFP_FS stripped off, and throttle_vm_writeout is designed to break out when __GFP_IO or GFP_FS is unset; but when tmfps swaps in, read_swap_cache_async allocates with GFP_HIGHUSER_MOVABLE regardless of the mapping_gfp_mask - hence the hang. So, pass gfp_mask down the line from shmem_getpage to shmem_swapin to swapin_readahead to read_swap_cache_async to add_to_swap_cache. Signed-off-by: NHugh Dickins <hugh@veritas.com> Acked-by: NRik van Riel <riel@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 7月, 2007 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 7月, 2007 1 次提交
-
-
由 Anderson Briglia 提交于
Fix the shrink_list name on some files under mm/ directory. Signed-off-by: NAnderson Briglia <anderson.briglia@indt.org.br> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2007 1 次提交
-
-
由 Nick Piggin 提交于
Ensure pages are uptodate after returning from read_cache_page, which allows us to cut out most of the filesystem-internal PageUptodate calls. I didn't have a great look down the call chains, but this appears to fixes 7 possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in block2mtd. All depending on whether the filler is async and/or can return with a !uptodate page. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 1月, 2007 1 次提交
-
-
由 Rafael J. Wysocki 提交于
In the kernels later than 2.6.19 there is a regression that makes swsusp fail if the resume device is not explicitly specified. It can be fixed by adding an additional parameter to mm/swapfile.c:swap_type_of() allowing us to pass the (struct block_device *) corresponding to the first available swap back to the caller. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 12月, 2006 1 次提交
-
-
由 Josef "Jeff" Sipek 提交于
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in linux/mm/. Signed-off-by: NJosef "Jeff" Sipek <jsipek@cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 12月, 2006 5 次提交
-
-
由 Helge Deller 提交于
- move some file_operations structs into the .rodata section - move static strings from policy_types[] array into the .rodata section - fix generic seq_operations usages, so that those structs may be defined as "const" as well [akpm@osdl.org: couple of fixes] Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
Make swsusp use block device offsets instead of swap offsets to identify swap locations and make it use the same code paths for writing as well as for reading data. This allows us to use the same code for handling swap files and swap partitions and to simplify the code, eg. by dropping rw_swap_page_sync(). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
The Linux kernel handles swap files almost in the same way as it handles swap partitions and there are only two differences between these two types of swap areas: (1) swap files need not be contiguous, (2) the header of a swap file is not in the first block of the partition that holds it. From the swsusp's point of view (1) is not a problem, because it is already taken care of by the swap-handling code, but (2) has to be taken into consideration. In principle the location of a swap file's header may be determined with the help of appropriate filesystem driver. Unfortunately, however, it requires the filesystem holding the swap file to be mounted, and if this filesystem is journaled, it cannot be mounted during a resume from disk. For this reason we need some other means by which swap areas can be identified. For example, to identify a swap area we can use the partition that holds the area and the offset from the beginning of this partition at which the swap header is located. The following patch allows swsusp to identify swap areas this way. It changes swap_type_of() so that it takes an additional argument representing an offset of the swap header within the partition represented by its first argument. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Sandeen 提交于
The fsfuzzer found this; with a corrupt small swapfile that claims to have many pages: [root]# file swap.741.img swap.741.img: Linux/i386 swap file (new style) 1 (4K pages) size 1040191487 pages [root]# ls -l swap.741.img -rw-r--r-- 1 root root 16777216 Nov 22 05:18 swap.741.img sys_swapon() will try to vmalloc all those pages, and -then- check to see if the file is actually that large: if (!(p->swap_map = vmalloc(maxpages * sizeof(short)))) { <snip> if (swapfilesize && maxpages > swapfilesize) { printk(KERN_WARNING "Swap area shorter than signature indicates\n"); It seems to me that it would make more sense to move this test up before the vmalloc, with the other checks, to avoid the OOM-killer in this situation... Signed-off-by: NEric Sandeen <sandeen@redhat.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Suleiman Souhlal 提交于
It would be possible for /proc/swaps to not always print out the header: swapon /dev/hdc2 swapon /dev/hde2 swapoff /dev/hdc2 At this point /proc/swaps would not have a header. Signed-off-by: NSuleiman Souhlal <suleiman@google.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 9月, 2006 1 次提交
-
-
由 Hugh Dickins 提交于
akpm draws my attention to the fact that sysctl(VM_PAGE_CLUSTER) might conceivably change page_cluster to 0 while valid_swaphandles() is in the middle of using it, leading to an embarrassingly long loop: take a local snapshot of page_cluster and work with that. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 8月, 2006 1 次提交
-
-
由 Rafael J. Wysocki 提交于
There is a bug in mm/swapfile.c#swap_type_of() that makes swsusp only be able to use the first active swap partition as the resume device. Fix it. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Hugh Dickins <hugh@veritas.com> Acked-by: NPavel Machek <pavel@suse.cz> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 23 6月, 2006 5 次提交
-
-
由 Pekka Enberg 提交于
Add read_mapping_page() which is used for callers that pass mapping->a_ops->readpage as the filler for read_cache_page. This removes some duplication from filesystem code. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
Now that we have atomic_inc_not_zero, it's more elegant for try_to_unuse to use that on mm_users: doesn't actually matter at present, but safer to be sure that once mm_users has gone to 0, nothing raises it for an instant. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Rip the page migration logic out. Remove all code that has to do with swapping during page migration. This also guts the ability to migrate pages to swap. No one used that so lets let it go for good. Page migration should be a bit broken after this patch. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: NHugh Dickins <hugh@veritas.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NChristoph Lameter <clameter@engr.sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Remove two unnecessary PageSwapCache checks. The page refcount is raised and therefore page migration cannot occur in both functions. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 4月, 2006 1 次提交
-
-
由 Nick Piggin 提交于
find_trylock_page() is an odd interface in that it doesn't take a reference like the others. Now that XFS no longer uses it, and its last remaining caller actually wants an elevated refcount, opencode that callsite and schedule find_trylock_page() for removal. Signed-off-by: NNick Piggin <npiggin@suse.de> Acked-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 3月, 2006 2 次提交
-
-
由 Rafael J. Wysocki 提交于
This patch introduces a user space interface for swsusp. The interface is based on a special character device, called the snapshot device, that allows user space processes to perform suspend and resume-related operations with the help of some ioctls and the read()/write() functions. Additionally it allows these processes to allocate free swap pages from a selected swap partition, called the resume partition, so that they know which sectors of the resume partition are available to them. The interface uses the same low-level system memory snapshot-handling functions that are used by the built-it swap-writing/reading code of swsusp. The interface documentation is included in the patch. The patch assumes that the major and minor numbers of the snapshot device will be 10 (ie. misc device) and 231, the registration of which has already been requested. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
Introduce the low level interface that can be used for handling the snapshot of the system memory by the in-kernel swap-writing/reading code of swsusp and the userland interface code (to be introduced shortly). Also change the way in which swsusp records the allocated swap pages and, consequently, simplifies the in-kernel swap-writing/reading code (this is necessary for the userland interface too). To this end, it introduces two helper functions in mm/swapfile.c, so that the swsusp code does not refer directly to the swap internals. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 3月, 2006 1 次提交
-
-
由 Akinobu Mita 提交于
When we've allocated SWAPFILE_CLUSTER pages, ->cluster_next should be the first index of swap cluster. But current code probably sets it wrong offset. Signed-off-by: NAkinobu Mita <mita@miraclelinux.com> Acked-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 2月, 2006 2 次提交
-
-
由 Christoph Lameter 提交于
Add remove_from_swap remove_from_swap() allows the restoration of the pte entries that existed before page migration occurred for anonymous pages by walking the reverse maps. This reduces swap use and establishes regular pte's without the need for page faults. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Check for PageSwapCache after looking up and locking a swap page. The page migration code may change a swap pte to point to a different page under lock_page(). If that happens then the vm must retry the lookup operation in the swap space to find the correct page number. There are a couple of locations in the VM where a lock_page() is done on a swap page. In these locations we need to check afterwards if the page was migrated. If the page was migrated then the old page that was looked up before was freed and no longer has the PageSwapCache bit set. Signed-off-by: NHirokazu Takahashi <taka@valinux.co.jp> Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 19 1月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
Convert mm/swapfile.c's swapon_sem to swapon_mutex. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 1 次提交
-
-
由 Randy.Dunlap 提交于
- Move capable() from sched.h to capability.h; - Use <linux/capability.h> where capable() is used (in include/, block/, ipc/, kernel/, a few drivers/, mm/, security/, & sound/; many more drivers/ to go) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 1月, 2006 1 次提交
-
-
由 Jesper Juhl 提交于
in mm/swapfile.c a printk() is missing a loglevel. I believe the proper loglevel for this situation is KERN_ERR, so that's what the patch below sets -if you agree, please apply. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 10 1月, 2006 1 次提交
-
-
由 Jes Sorensen 提交于
This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: NIngo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 1月, 2006 1 次提交
-
-
由 Tobias Klauser 提交于
Clean up a local variable with the same name as a variable in a larger block. Also move a variable into the block where it's actually used. Spotted by http://linuxicc.sourceforge.net/Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 1月, 2006 1 次提交
-
-
由 Rafael J. Wysocki 提交于
This adds the function get_swap_page_of_type() allowing us to specify an index in swap_info[] and select a swap_info_struct structure to be used for allocating a swap page. This function (or another one of similar functionality) will be necessary for implementing the image-writing part of swsusp in the user space. It can also be used for simplifying the current in-kernel implementation of the image-writing part of swsusp. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 11月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
I didn't find any possible modular usage in the kernel. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 10月, 2005 1 次提交
-
-
由 Hugh Dickins 提交于
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-