* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: scripts/ver_linux: don't set PATH
  Kconfig/init: change help text to match default value
  kbuild: genksyms: Include extern information in dumps
  kbuild: genksyms parser: fix the __attribute__ rule
  kbuild: scripts/genksyms/lex.l: add %option noinput
  kconfig: scripts/kconfig/zconf.l: add %option noinput
  kbuild: fix O=... build of um

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  md: the bitmap code needs to use blk_plug_device_unlocked()
  block: add a blk_plug_device_unlocked() that grabs the queue lock

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: fix gdb serial thread queries
  kgdb: fix kgdb_validate_break_address to perform a mem write
  kgdb: remove the requirement for CONFIG_FRAME_POINTER

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ASoC: Export dapm_reg_event() fully
  ALSA: ASoC: Update Poodle to current ASoC API
  ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers
  ALSA: sound/soc/pxa/tosa.c: removed duplicated include

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits)
  tcp: MD5: Fix IPv6 signatures
  skbuff: add missing kernel-doc for do_not_encrypt
  net/ipv4/route.c: fix build error
  tcp: MD5: Fix MD5 signatures on certain ACK packets
  ipv6: Fix ip6_xmit to send fragments if ipfragok is true
  ipvs: Move userspace definitions to include/linux/ip_vs.h
  netdev: Fix lockdep warnings in multiqueue configurations.
  netfilter: xt_hashlimit: fix race between htable_destroy and htable_gc
  netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulations
  netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledged
  irda: replace __FUNCTION__ with __func__
  nsc-ircc: default to dongle type 9 on IBM hardware
  bluetooth: add quirks for a few hci_usb devices
  hysdn: remove the packed attribute from PofTimStamp_tag
  isdn: use the common ascii hex helpers
  tg3: adapt tg3 to use reworked PCI PM code
  atm: fix direct casts of pointers to u32 in the InterPhase driver
  atm: fix const assignment/discard warnings in the ATM networking driver
  net: use the common ascii hex helpers
  random32: seeding improvement
  ...

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: needs new maintainer
  hwmon: (lm85) Simplify device initialization function
  hwmon: (lm85) Misc cleanups
  hwmon: (lm85) Don't write back cached values
  hwmon: (lm85) Drop dead code
  hwmon: (lm85) Coding-style cleanups
  hwmon: (lm75) add new-style driver binding
  hwmon: (lm75) cleanup/reorg
  hwmon: (adt7473) clarify an awkward bit of code
  hwmon: (adt7473) Remove unused defines
  hwmon: (dme1737) fix voltage scaling
  hwmon: (dme1737) probe all addresses
  hwmon: (dme1737) demacrofy for readability

It doesn't hold the queue lock, so it's both racey on the queue flags
and thus spews a warning.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

blk_plug_device() must be called with the queue lock held, so callers
often just grab and release the lock for that purpose. Add a helper
that does just that.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

* git://git.infradead.org/mtd-2.6:
  [MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings
  [MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function
  [MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk()
  [MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default
  [MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions
  [MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses
  [MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10
  [MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages
  [MTD] [NAND] diskonchip.c fix sparse endian warnings
  [MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h
  [JFFS2] Fix allocation of summary buffer
  Fix rename of at91_nand -> atmel_nand
  [MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID
  [MTD] MTD_DEBUG always does compile-time typechecks
  [MTD] DataFlash: bugfix, binary page sizes now handled
  [MTD] [NAND] fsl_elbc_nand.c: fix printk warning
  [MTD] [NAND] nandsim: support random page read command
  [MTD] [NAND] fix subpage read for small page NAND

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] pass struct path * to do_add_mount()
  [PATCH] switch mtd and dm-table to lookup_bdev()
  [patch 3/4] vfs: remove unused nameidata argument of may_create()
  [PATCH] devpts: switch to IDA
  [PATCH 2/2] proc: switch inode number allocation to IDA
  [PATCH 1/2] proc: fix inode number bogorithmetic
  [PATCH] fix bdev leak in block_dev.c do_open()
  [PATCH] fix races and leaks in vfs_quota_on() users
  [PATCH] clean dup2() up a bit
  [PATCH] merge locate_fd() and get_unused_fd()
  [PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL
  Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree

* 'audit.b54' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
  [PATCH] Fix the kernel panic of audit_filter_task when key field is set
  Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages
  kernel/audit.c control character detection is off-by-one
  [PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  au1xmmc: raise segment size limit.
  mmc_block: use proper sg iterators
  mmc: properly iterate over sg list in debug check
  mmc_test: Revert "mmc_test: test oversized sg lists"
  sdhci: check correct return value
  sdhci: disable DMA for req, not completely
  sdhci: handle bug in JMB38x for sizes < 4 bytes

* 'reg-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: TI bq24022 Li-Ion Charger driver
  regulator: maintainers - add maintainers for regulator framework.
  regulator: documentation - ABI
  regulator: documentation - machine
  regulator: documentation - regulator driver
  regulator: documentation - consumer interface
  regulator: documentation - overview
  regulator: core kbuild files
  regulator: regulator test harness
  regulator: add support for fixed regulators.
  regulator: regulator framework core
  regulator: fixed regulator interface
  regulator: machine driver interface
  regulator: regulator driver interface
  regulator: consumer device interface

Merge branch 'hotfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'hotfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELinux: /proc/mounts should show what it can

* git://git.infradead.org/battery-2.6:
  power_supply: Sharp SL-6000 (tosa) batteries support
  power_supply: fix up CHARGE_COUNTER output to be more precise
  power_supply: add CHARGE_COUNTER property and olpc_battery support for it
  power_supply: bump EC version check that we refuse to run with in olpc_battery
  power_supply: cleanup of the OLPC battery driver
  power_supply: add eeprom dump file to olpc_battery's sysfs
  power_supply: Support serial number in olpc_battery

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits)
  mm/hugetlb.c must #include <asm/io.h>
  video: Fix up hp6xx driver build regressions.
  sh: defconfig updates.
  sh: Kill off stray mach-rsk7203 reference.
  serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.
  sh: Move out individual boards without mach groups.
  sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h.
  sh: Allow SH-3 and SH-5 to use common headers.
  sh: Provide common CPU headers, prune the SH-2 and SH-2A directories.
  sh/maple: clean maple bus code
  sh: More header path fixups for mach dir refactoring.
  sh: Move out the solution engine headers to arch/sh/include/mach-se/
  sh: I2C fix for AP325RXA and Migo-R
  sh: Shuffle the board directories in to mach groups.
  sh: dma-sh: Fix up dreamcast dma.h mach path.
  sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.
  sh: Add ARCH_DEFCONFIG entries for sh and sh64.
  sh: Fix compile error of Solution Engine
  sh: Proper __put_user_asm() size mismatch fix.
  sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  generic, x86: fix add iommu_num_pages helper function
  x86: remove stray <6> in BogoMIPS printk
  x86: move dma32_reserve_bootmem() after reserve_crashkernel()

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] qeth: avoid use of include/asm-s390
  [S390] dont use kthread for smp_rescan_cpus().
  [S390] virtio console: fix section mismatch warning.
  [S390] cio: Include linux/string.h in schid.h.
  [S390] qdio: fix section mismatch bug.
  [S390] stp: fix section mismatch warning.
  [S390] Remove diag 0x260 call from memory detection.
  [S390] qdio: make sure qdr is aligned to page size
  [S390] Add support for memory hot-remove.
  [S390] Wire up new syscalls.
  [S390] cio: Memory allocation for idset changed.
  [S390] qeth: preallocated qeth header for hiper socket
  [S390] Optimize storage key operations for anon pages
  [S390] nohz/sclp: disable timer on synchronous waits.
  [S390] ipl: Reboot from alternate device does not work when booting from file
  [S390] dasd: Add support for enhanced VM UID
  [S390] Remove last P390 trace.

Raise the DMA block size limit from 2048 bytes to the maximum supported
by the DMA controllers on the chip (64KB on Au1100, 4MB on Au1200).

This gives a very small performance boost and apparently fixes an oops
when MMC-DMA and network traffic are active at the same time.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

This reverts commit 48b5352e. Oversized
sg lists are not allowed anymore, and the core even checks for them in
debug mode, so this test is entirely incorrect.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Fix a copy-and-paste error.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

The wrong flag was manipulated when an invalid sg list was given, turning
off DMA on the next (and all subsequent) request instead of the current
one.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

When the "status_get->mask" is "AUDIT_STATUS_RATE_LIMIT || AUDIT_STATUS_BACKLOG_LIMIT".
If "audit_set_rate_limit" fails and "audit_set_backlog_limit" succeeds, the "err" value
will be greater than or equal to 0. It will miss the failure of rate set.
Signed-off-by: NZhang Xiliang <zhangxiliang@cn.fujitsu.com>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When calling audit_filter_task(), it calls audit_filter_rules() with audit_context is NULL.
If the key field is set, the result in audit_filter_rules() will be set to 1 and
ctx->filterkey will be set to key.
But the ctx is NULL in this condition, so kernel will panic.
Signed-off-by: NZhang Xiliang <zhangxiliang@cn.fujitsu.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

> shouldn't these be using the "audit_get_loginuid(current)"  and if we
> are going to output loginuid we also should be outputting sessionid

Thanks for your detailed explanation.
I have made a new patch for outputing "loginuid" and "sessionid" by audit_get_loginuid(current) and audit_get_sessionid(current).
If there are some deficiencies, please give me your indication.
Signed-off-by: NZhang Xiliang <zhangxiliang@cn.fujitsu.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Hello,

According to my understanding there is an off-by-one bug in the
function:

   audit_string_contains_control()

in:

  kernel/audit.c

Patch is included.

I do not know from how many places the function is called from, but for
example, SELinux Access Vector Cache tries to log untrusted filenames via
call path:

avc_audit()
     audit_log_untrustedstring()
         audit_log_n_untrustedstring()
             audit_string_contains_control()

If audit_string_contains_control() detects control characters, then the
string is hex-encoded. But the hex=0x7f dec=127, DEL-character, is not
detected.

I guess this could have at least some minor security implications, since a
user can create a filename with 0x7f in it, causing logged filename to
possibly look different when someone reads it on the terminal.
Signed-off-by: NVesa-Matti Kari <vmkari@cc.helsinki.fi>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Makes the kernel audit subsystem collect information about the sending
process when that process sends SIGUSR2 to the userspace audit daemon.
SIGUSR2 is a new interesting signal to auditd telling auditd that it
should try to start logging to disk again and the error condition which
caused it to stop logging to disk (usually out of space) has been
rectified.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

No need to open-code it...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Devpts code wants just numbers for tty indexes.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

proc doesn't use "associate pointer with id" feature of IDR, so switch
to IDA.

NOTE, NOTE, NOTE:
	Do not apply if release_inode_number() still mantions MAX_ID_MASK!
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Id which proc gets from IDR for inode number and id which proc removes
from IDR do not match. E.g. 0x11a transforms into 0x8000011a.

Which stayed unnoticed for a long time because, surprise, idr_remove()
masks out that high bit before doing anything.

All of this due to "| ~MAX_ID_MASK" in release_inode_number().

I still don't understand how it's supposed to work, because "| ~MASK"
is not an inversion for "& MAX" operation.

So, use just one nice, working addition. Make start offset unsigned int,
while I'm at it. It's longness is not used anywhere.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Callers expect it to drop reference to bdev on all failure exits.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the
  pathname resolution.
* callers of vfs_quota_on() that do their own pathname resolution and
  checks based on it are switched to vfs_quota_on_path(); that way we
  avoid the races.
* reiserfs leaked dentry/vfsmount references on several failure exits.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

	New primitive: alloc_fd(start, flags).  get_unused_fd() and
get_unused_fd_flags() become wrappers on top of it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>