- 09 3月, 2016 2 次提交
-
-
由 Bjorn Helgaas 提交于
Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/hotplug/Kconfig. Note that this effectively adds pci/hotplug/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/hotplug/Kconfig: alpha arm avr32 frv m68k microblaze mn10300 sparc unicore32 Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bogicevic Sasa 提交于
Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/pcie/Kconfig. Note that this effectively adds pci/pcie/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/pcie/Kconfig: alpha avr32 blackfin frv m32r m68k microblaze mn10300 parisc sparc unicore32 xtensa [bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace] Signed-off-by: NSasa Bogicevic <brutallesale@gmail.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 21 1月, 2016 2 次提交
-
-
由 Christoph Hellwig 提交于
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Axtens 提交于
This hooks up UBSAN support for PowerPC. So far it's found some interesting cases where we don't properly sanitise input to shifts, including one in our futex handling. Nothing critical, but interesting and worth fixing. [valentinrothberg@gmail.com: arch/powerpc/Kconfig: fix typo in select statement] Signed-off-by: NDaniel Axtens <dja@axtens.net> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 1月, 2016 1 次提交
-
-
由 Will Deacon 提交于
As illustrated by commit a3afe70b ("[S390] latencytop s390 support."), HAVE_LATENCYTOP_SUPPORT is defined by an architecture to advertise an implementation of save_stack_trace_tsk. However, as of 9212ddb5 ("stacktrace: provide save_stack_trace_tsk() weak alias") a dummy implementation is provided if STACKTRACE=y. Given that LATENCYTOP already depends on STACKTRACE_SUPPORT and selects STACKTRACE, we can remove HAVE_LATENCYTOP_SUPPORT altogether. Signed-off-by: NWill Deacon <will.deacon@arm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Helge Deller <deller@gmx.de> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 1月, 2016 1 次提交
-
-
由 Dan Williams 提交于
Let all the archs that implement devmem_is_allowed() opt-in to a common definition of CONFIG_STRICT_DEVM in lib/Kconfig.debug. Cc: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> [heiko: drop 'default y' for s390] Acked-by: NIngo Molnar <mingo@redhat.com> Suggested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 23 12月, 2015 1 次提交
-
-
由 Zhao Qiang 提交于
ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: NZhao Qiang <qiang.zhao@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 17 12月, 2015 1 次提交
-
-
由 Laurent Dufour 提交于
User space checkpoint and restart tool (CRIU) needs the page's change to be soft tracked. This allows to do a pre checkpoint and then dump only touched pages. This is done by using a newly assigned PTE bit (_PAGE_SOFT_DIRTY) when the page is backed in memory, and a new _PAGE_SWP_SOFT_DIRTY bit when the page is swapped out. To introduce a new PTE _PAGE_SOFT_DIRTY bit value common to hash 4k and hash 64k pte, the bits already defined in hash-*4k.h should be shifted left by one. The _PAGE_SWP_SOFT_DIRTY bit is dynamically put after the swap type in the swap pte. A check is added to ensure that the bit is not overwritten by _PAGE_HPTEFLAGS. Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> CC: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 28 10月, 2015 1 次提交
-
-
由 Tiejun Chen 提交于
Allow KEXEC for book3e, and bypass or convert non-book3e stuff in kexec code. Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com> [scottwood@freescale.com: move code to minimize diff, and cleanup] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 11 9月, 2015 1 次提交
-
-
由 Dave Young 提交于
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NDave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 8月, 2015 2 次提交
-
-
由 Michael Ellerman 提交于
The relation between CONFIG_PPC_HAS_HASH_64K and CONFIG_PPC_64K_PAGES is painfully complicated. But if we rearrange it enough we can see that PPC_HAS_HASH_64K essentially depends on PPC_STD_MMU_64 && PPC_64K_PAGES. We can then notice that PPC_HAS_HASH_64K is used in files that are only built for PPC_STD_MMU_64, meaning it's equivalent to PPC_64K_PAGES. So replace all uses and drop it. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Michael Ellerman 提交于
For config options with only a single value, guarding the single value with 'if' is the same as adding a 'depends' statement. And it's more standard to just use 'depends'. And if the option has both an 'if' guard and a 'depends' we can collapse them into a single 'depends' by combining them with &&. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
- 30 7月, 2015 1 次提交
-
-
由 Michael Ellerman 提交于
This commit enables seccomp filter on powerpc, now that we have all the necessary pieces in place. To support seccomp's desire to modify the syscall return value under some circumstances, we use a different ABI to the ptrace ABI. That is we use r3 as the syscall return value, and orig_gpr3 is the first syscall parameter. This means the seccomp code, or a ptracer via SECCOMP_RET_TRACE, will see -ENOSYS preloaded in r3. This is identical to the behaviour on x86, and allows seccomp or the ptracer to either leave the -ENOSYS or change it to something else, as well as rejecting or not the syscall by modifying r0. If seccomp does not reject the syscall, we restore the register state to match what ptrace and audit expect, ie. r3 is the first syscall parameter again. We do this restore using orig_gpr3, which may have been modified by seccomp, which allows seccomp to modify the first syscall paramater and allow the syscall to proceed. We need to #ifdef the the additional handling of r3 for seccomp, so move it all out of line. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
- 13 7月, 2015 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This patch adds the ability to the DMA direct ops to fallback to the IOMMU ops for coherent alloc/free if the coherent mask of the device isn't suitable for accessing the direct DMA space and the device also happens to have an active IOMMU table. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 28 5月, 2015 1 次提交
-
-
由 Borislav Petkov 提交于
So first of all, this atomic_scrub() function's naming is bad. It looks like an atomic_t helper. Change it to edac_atomic_scrub(). The bigger problem is that this function is arch-specific and every new arch which doesn't necessarily need that functionality still needs to define it, otherwise EDAC doesn't compile. So instead of doing that and including arch-specific headers, have each arch define an EDAC_ATOMIC_SCRUB symbol which can be used in edac_mc.c for ifdeffery. Much cleaner. And we already are doing this with another symbol - EDAC_SUPPORT. This is also much cleaner than having CONFIG_EDAC enumerate all the arches which need/have EDAC support and drivers. This way I can kill the useless edac.h header in tile too. Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NChris Metcalf <cmetcalf@ezchip.com> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linuxppc-dev@lists.ozlabs.org Cc: "Maciej W. Rozycki" <macro@codesourcery.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Steven J. Hill" <Steven.Hill@imgtec.com> Cc: x86@kernel.org Signed-off-by: NBorislav Petkov <bp@suse.de>
-
- 15 4月, 2015 3 次提交
-
-
由 Kees Cook 提交于
This fixes the "offset2lib" weakness in ASLR for arm, arm64, mips, powerpc, and x86. The problem is that if there is a leak of ASLR from the executable (ET_DYN), it means a leak of shared library offset as well (mmap), and vice versa. Further details and a PoC of this attack is available here: http://cybersecurity.upv.es/attacks/offset2lib/offset2lib.html With this patch, a PIE linked executable (ET_DYN) has its own ASLR region: $ ./show_mmaps_pie 54859ccd6000-54859ccd7000 r-xp ... /tmp/show_mmaps_pie 54859ced6000-54859ced7000 r--p ... /tmp/show_mmaps_pie 54859ced7000-54859ced8000 rw-p ... /tmp/show_mmaps_pie 7f75be764000-7f75be91f000 r-xp ... /lib/x86_64-linux-gnu/libc.so.6 7f75be91f000-7f75beb1f000 ---p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb1f000-7f75beb23000 r--p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb23000-7f75beb25000 rw-p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb25000-7f75beb2a000 rw-p ... 7f75beb2a000-7f75beb4d000 r-xp ... /lib64/ld-linux-x86-64.so.2 7f75bed45000-7f75bed46000 rw-p ... 7f75bed46000-7f75bed47000 r-xp ... 7f75bed47000-7f75bed4c000 rw-p ... 7f75bed4c000-7f75bed4d000 r--p ... /lib64/ld-linux-x86-64.so.2 7f75bed4d000-7f75bed4e000 rw-p ... /lib64/ld-linux-x86-64.so.2 7f75bed4e000-7f75bed4f000 rw-p ... 7fffb3741000-7fffb3762000 rw-p ... [stack] 7fffb377b000-7fffb377d000 r--p ... [vvar] 7fffb377d000-7fffb377f000 r-xp ... [vdso] The change is to add a call the newly created arch_mmap_rnd() into the ELF loader for handling ET_DYN ASLR in a separate region from mmap ASLR, as was already done on s390. Removes CONFIG_BINFMT_ELF_RANDOMIZE_PIE, which is no longer needed. Signed-off-by: NKees Cook <keescook@chromium.org> Reported-by: NHector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
When an architecture fully supports randomizing the ELF load location, a per-arch mmap_rnd() function is used to find a randomized mmap base. In preparation for randomizing the location of ET_DYN binaries separately from mmap, this renames and exports these functions as arch_mmap_rnd(). Additionally introduces CONFIG_ARCH_HAS_ELF_RANDOMIZE for describing this feature on architectures that support it (which is a superset of ARCH_BINFMT_ELF_RANDOMIZE_PIE, since s390 already supports a separated ET_DYN ASLR from mmap ASLR without the ARCH_BINFMT_ELF_RANDOMIZE_PIE logic). Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 4月, 2015 1 次提交
-
-
由 Anton Blanchard 提交于
The hard lockup detector uses a PMU event as a periodic NMI to detect if we are stuck (where stuck means no timer interrupts have occurred). Ben's rework of the ppc64 soft disable code has made ppc64 PMU exceptions a partial NMI. They can get disabled if an external interrupt comes in, but otherwise PMU interrupts will fire in interrupt disabled regions. We disable the hard lockup detector by default for a few reasons: - It breaks userspace event based branches on POWER8. - It is likely to produce false positives on KVM guests. - Since PMCs can only count to 2^31, counting cycles means we might take multiple PMU exceptions per second per hardware thread even if our hard lockup timeout is 10 seconds. It can be enabled via a boot option, or via procfs. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 17 3月, 2015 1 次提交
-
-
由 Kevin Hao 提交于
We have set CONFIG_PPC_OF to always 'y' in commit 0a498d96 ("powerpc: set CONFIG_PPC_OF=y always for ARCH=powerpc") nine years ago. And the arch/ppc also has gone away for many years. The OF functionality was also moved to a common place and be used by many archs. So it does make no sense to keep such a option in the current kernel. Just kill it. Signed-off-by: NKevin Hao <haokexin@gmail.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 21 2月, 2015 1 次提交
-
-
由 Denis Kirjanov 提交于
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2015 1 次提交
-
-
由 Kim Phillips 提交于
arch/powerpc has __kernel_map_pages implementations in mm/pgtable_32.c, and mm/hash_utils_64.c, of which the former is built for PPC32, and the latter for PPC64 machines with PPC_STD_MMU. Fix arch/powerpc/Kconfig to not select ARCH_SUPPORTS_DEBUG_PAGEALLOC when CONFIG_PPC_STD_MMU_64 isn't defined, i.e., for 64-bit book3e builds to use the generic __kernel_map_pages() in mm/debug-pagealloc.c. LD init/built-in.o mm/built-in.o: In function `kernel_map_pages': include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' Makefile:925: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 14 12月, 2014 1 次提交
-
-
由 Riku Voipio 提交于
Following the suggestions from Andrew Morton and Stephen Rothwell, Dont expand the ARCH list in kernel/gcov/Kconfig. Instead, define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures can enable. set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was previously allowed + ARM64 which I tested. Signed-off-by: NRiku Voipio <riku.voipio@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 11月, 2014 1 次提交
-
-
由 Vineeth Vijayan 提交于
Back in 2009 we merged 501cb16d "Randomise PIEs", which added support for randomizing PIE (Position Independent Executable) binaries. That commit added randomize_et_dyn(), which correctly randomized the addresses, but failed to honor PF_RANDOMIZE. That means it was not possible to disable PIE randomization via the personality flag, or /proc/sys/kernel/randomize_va_space. Since then there has been generic support for PIE randomization added to binfmt_elf.c, selectable via ARCH_BINFMT_ELF_RANDOMIZE_PIE. Enabling that allows us to drop randomize_et_dyn(), which means we start honoring PF_RANDOMIZE correctly. It also causes a fairly major change to how we layout PIE binaries. Currently we will place the binary at 512MB-520MB for 32 bit binaries, or 512MB-1.5GB for 64 bit binaries, eg: $ cat /proc/$$/maps 4e550000-4e580000 r-xp 00000000 08:02 129813 /bin/dash 4e580000-4e590000 rw-p 00020000 08:02 129813 /bin/dash 10014110000-10014140000 rw-p 00000000 00:00 0 [heap] 3fffaa3f0000-3fffaa5a0000 r-xp 00000000 08:02 921 /lib/powerpc64le-linux-gnu/libc-2.19.so 3fffaa5a0000-3fffaa5b0000 rw-p 001a0000 08:02 921 /lib/powerpc64le-linux-gnu/libc-2.19.so 3fffaa5c0000-3fffaa5d0000 rw-p 00000000 00:00 0 3fffaa5d0000-3fffaa5f0000 r-xp 00000000 00:00 0 [vdso] 3fffaa5f0000-3fffaa620000 r-xp 00000000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so 3fffaa620000-3fffaa630000 rw-p 00020000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so 3ffffc340000-3ffffc370000 rw-p 00000000 00:00 0 [stack] With this commit applied we don't do any special randomisation for the binary, and instead rely on mmap randomisation. This means the binary ends up at high addresses, eg: $ cat /proc/$$/maps 3fff99820000-3fff999d0000 r-xp 00000000 08:02 921 /lib/powerpc64le-linux-gnu/libc-2.19.so 3fff999d0000-3fff999e0000 rw-p 001a0000 08:02 921 /lib/powerpc64le-linux-gnu/libc-2.19.so 3fff999f0000-3fff99a00000 rw-p 00000000 00:00 0 3fff99a00000-3fff99a20000 r-xp 00000000 00:00 0 [vdso] 3fff99a20000-3fff99a50000 r-xp 00000000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so 3fff99a50000-3fff99a60000 rw-p 00020000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so 3fff99a60000-3fff99a90000 r-xp 00000000 08:02 129813 /bin/dash 3fff99a90000-3fff99aa0000 rw-p 00020000 08:02 129813 /bin/dash 3fffc3de0000-3fffc3e10000 rw-p 00000000 00:00 0 [stack] 3fffc55e0000-3fffc5610000 rw-p 00000000 00:00 0 [heap] Although this should be OK, it's possible it might break badly written binaries that make assumptions about the address space layout. Signed-off-by: NVineeth Vijayan <vvijayan@mvista.com> [mpe: Rewrite changelog] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 14 11月, 2014 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
This patch switch the ppc arch to use the generic RCU based gup implementation. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 10 11月, 2014 1 次提交
-
-
由 Anton Blanchard 提交于
At the moment we transition from the memblock alloctor to the bootmem allocator. Gitting rid of the bootmem allocator removes a bunch of complicated code (most of which I owe the dubious honour of being responsible for writing). Signed-off-by: NAnton Blanchard <anton@samba.org> Tested-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 08 11月, 2014 1 次提交
-
-
由 LEROY Christophe 提交于
This patch activates the handling of 16k pages on the MPC8xx. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 08 10月, 2014 1 次提交
-
-
由 Ian Munsie 提交于
Currently spu_handle_mm_fault() is in the cell platform. This code is generically useful for other non-cell co-processors on powerpc. This patch moves this function out of the cell platform into arch/powerpc/mm so that others may use it. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 30 9月, 2014 1 次提交
-
-
由 Anton Blanchard 提交于
Enable on DCACHE_WORD_ACCESS on ppc64le. It should work on ppc64 and ppc32 but we need to do some testing first. A somewhat reasonable testcase used to show the performance improvement - a repeated stat of a 33 byte filename that doesn't exist: #include <sys/types.h> #include <sys/stat.h> #include <unistd.h> #define ITERATIONS 10000000 #define PATH "123456781234567812345678123456781" int main(void) { unsigned long i; struct stat buf; for (i = 0; i < ITERATIONS; i++) stat(PATH, &buf); return 0; } runs 27% faster on POWER8. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 25 9月, 2014 1 次提交
-
-
由 Pranith Kumar 提交于
Fix ppc 32 build failure as reported here: http://kisskb.ellerman.id.au/kisskb/buildresult/11663513/ The error is as follows: arch/powerpc/include/asm/floppy.h:142:20: error: 'isa_bridge_pcidev' undeclared (first use in this function) This is happening since floppy.o is enabled by BLK_DEV_FD which depends on ARCH_MAY_HAVE_PC_FDC which is in-turn enabled if PPC_PSERIES=n. The following commit changes the dependency so that ARCH_MAY_HAVE_PC_FDC is dependent exclusively on PCI since otherwise it will not compile. Signed-off-by: NPranith Kumar <bobby.prani@gmail.com> Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 04 9月, 2014 1 次提交
-
-
由 Scott Wood 提交于
Platform code can call limit_zone_pfn() to set appropriate limits for ZONE_DMA and ZONE_DMA32, and dma_direct_alloc_coherent() will select a suitable zone based on a device's mask and the pfn limits that platform code has configured. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
-
- 30 8月, 2014 1 次提交
-
-
由 Vivek Goyal 提交于
New system call depends on crypto. As it did not have a separate config option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256. But now previous patch introduced a new config option for new syscall. So CONFIG_KEXEC does not require crypto. Remove that dependency. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Shaun Ruffell <sruffell@digium.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 8月, 2014 2 次提交
-
-
由 Vivek Goyal 提交于
Load purgatory code in RAM and relocate it based on the location. Relocation code has been inspired by module relocation code and purgatory relocation code in kexec-tools. Also compute the checksums of loaded kexec segments and store them in purgatory. Arch independent code provides this functionality so that arch dependent bootloaders can make use of it. Helper functions are provided to get/set symbol values in purgatory which are used by bootloaders later to set things like stack and entry point of second kernel etc. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Laura Abbott 提交于
Rather than have architectures #define ARCH_HAS_SG_CHAIN in an architecture specific scatterlist.h, make it a proper Kconfig option and use that instead. At same time, remove the header files are are now mostly useless and just include asm-generic/scatterlist.h. [sfr@canb.auug.org.au: powerpc files now need asm/dma.h] Signed-off-by: NLaura Abbott <lauraa@codeaurora.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc] Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 7月, 2014 1 次提交
-
-
由 Peter Zijlstra 提交于
The optimistic spin code assumes regular stores and cmpxchg() play nice; this is found to not be true for at least: parisc, sparc32, tile32, metag-lock1, arc-!llsc and hexagon. There is further wreckage, but this in particular seemed easy to trigger, so blacklist this. Opt in for known good archs. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Reported-by: NMikulas Patocka <mpatocka@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Jason Low <jason.low2@hp.com> Cc: Waiman Long <waiman.long@hp.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: John David Anglin <dave.anglin@bell.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: stable@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 11 7月, 2014 1 次提交
-
-
由 Guenter Roeck 提交于
powerpc:allmodconfig has been failing for some time with the following error. arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1 A number of attempts to fix the problem by moving around code have been unsuccessful and resulted in failed builds for some configurations and the discovery of toolchain bugs. Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead. While this is less than perfect, it avoids substantial code changes which would otherwise be necessary just to make COMPILE_TEST builds happy and might have undesired side effects. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 5月, 2014 2 次提交
-
-
由 Nishanth Aravamudan 提交于
Based off fd1197f1 for ia64, enable CONFIG_HAVE_MEMORYLESS_NODES if NUMA. Initialize the local memory node in start_secondary. With this commit and the preceding to enable CONFIG_USER_PERCPU_NUMA_NODE_ID, which is a prerequisite, in a PowerKVM guest with the following topology: numactl --hardware available: 3 nodes (0-2) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 node 0 size: 1998 MB node 0 free: 521 MB node 1 cpus: 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 node 1 size: 0 MB node 1 free: 0 MB node 2 cpus: node 2 size: 2039 MB node 2 free: 1739 MB node distances: node 0 1 2 0: 10 40 40 1: 40 10 40 2: 40 40 10 the unreclaimable slab is reduced by close to 130M: Before: Slab: 418176 kB SReclaimable: 26624 kB SUnreclaim: 391552 kB After: Slab: 298944 kB SReclaimable: 31744 kB SUnreclaim: 267200 kB Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nishanth Aravamudan 提交于
Based off 3bccd996 for ia64, convert powerpc to use the generic per-CPU topology tracking, specifically: initialize per cpu numa_node entry in start_secondary remove the powerpc cpu_to_node() define CONFIG_USE_PERCPU_NUMA_NODE_ID if NUMA Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 20 3月, 2014 1 次提交
-
-
由 AKASHI Takahiro 提交于
Currently AUDITSYSCALL has a long list of architecture depencency: depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA) The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL for simplicity. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> (arm) Acked-by: Richard Guy Briggs <rgb@redhat.com> (audit) Acked-by: Matt Turner <mattst88@gmail.com> (alpha) Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: NEric Paris <eparis@redhat.com>
-
- 13 3月, 2014 1 次提交
-
-
由 Marek Szyprowski 提交于
Enable reserved memory initialization from device tree. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-