- 04 11月, 2014 23 次提交
-
-
由 Jaegeuk Kim 提交于
This patch fixes wrongly counting inline_data inode numbers. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch adds status information for inline_dentry inodes. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Previously, init_inode_metadata does not hold any parent directory's inode page. So, f2fs_init_acl can grab its parent inode page without any problem. But, when we use inline_dentry, that page is grabbed during f2fs_add_link, so that we can fall into deadlock condition like below. INFO: task mknod:11006 blocked for more than 120 seconds. Tainted: G OE 3.17.0-rc1+ #13 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mknod D ffff88003fc94580 0 11006 11004 0x00000000 ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8 0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220 ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002 Call Trace: [<ffffffff8173dc40>] ? bit_wait+0x50/0x50 [<ffffffff8173d4cd>] io_schedule+0x9d/0x130 [<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50 [<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0 [<ffffffff811640a7>] __lock_page+0x67/0x70 [<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40 [<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0 [<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs] [<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs] [<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs] [<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs] [<ffffffff8122d847>] get_acl+0x47/0x70 [<ffffffff8122db5a>] posix_acl_create+0x5a/0x150 [<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs] [<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs] [<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs] [<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs] [<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs] [<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs] [<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160 [<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200 [<ffffffff81741d7f>] tracesys+0xe1/0xe6 Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The inode page needs to wait NODE block io. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch removes redundant copied code in find_in_inline_dir. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch introduces to reuse the existing room_for_filename for inline dentry operation. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch adds descriptions for the inline dir support in f2fs document. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Add inline dir functions into normal dir ops' function to handle inline ops. Besides, we enable inline dir mode when a new dir inode is created if inline_data option is on. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Adds Functions to implement inline dir init/lookup/insert/delete/convert ops. Signed-off-by: NChao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: remove needless reserved area copy, pointed by Dan Carpenter] Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch exports some dir operations for inline dir, additionally introduces f2fs_drop_nlink from f2fs_delete_entry for reusing by inline dir function. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Adds a new mount option 'inline_dentry' for inline dir. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch defines macro/inline dentry structure, and adds some helpers for inline dir infrastructure. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch avoids an infinite loop in sync_dirty_inode_page when -EIO was detected. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch removes build warning. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch fixes to call f2fs_unlock_op, which was missing before. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The sceanrio is like this. inline_data i_size page write_begin/vm_page_mkwrite X 30 dirty_page X 30 write to #4096 position X 30 get_dnode_of_data wait for get_dnode_of_data O 30 write inline_data O 30 get_dnode_of_data O 30 reserve data block .. In this case, we have #0 = NEW_ADDR and inline_data as well. We should not allow this condition for further access. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch fixes to use highmem for directory pages. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Let's consider the following scenario. blkaddr[0] inline_data i_size i_blocks writepage truncate NEW X 4096 2 dirty page #0 NEW X 0 change i_size NEW X 0 2 f2fs_write_inline_data NEW X 0 2 get_dnode_of_data NEW X 0 2 truncate_data_blocks_range NULL O 0 1 memcpy(inline_data) NULL O 0 1 f2fs_put_dnode NULL O 0 1 f2fs_truncate NULL O 0 1 get_dnode_of_data NULL O 0 1 *invalid block addr* This patch adds checking inline_data flag during f2fs_truncate not to refer corrupted block indices. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
When trying to write inline_data, we should truncate any data block allocated and pointed by the inode block. We should consider the data index is not 0. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If user truncates file's data, we should truncate inmemory pages too. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch let inmemory pages be clean all the time. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k update from Geert Uytterhoeven. Just wiring up the bpf system call. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up bpf
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A surprisingly small batch of fixes for -rc3. Suspiciously small, I'd say. Anyway, most of this are a few defconfig updates. Some for omap to deal with kernel binary size (moving ipv6 to module, etc). A larger one for socfpga that refreshes with some churn, but also turns on a few options that makes the newly-added board in my bootfarm usable for testing. OMAP3 will also now warn when booted with legacy (non-DT) boot protocols, hopefully encouraging those who still care about some of those platforms to submit DT support and report bugs where needed. Nothing stops working though, this is just to warn for future deprecation. Beyond this, very few actual bugfixes. A PXA fix for DEBUG_LL boot hangs, a missing terminting entry in a dt_match array on RealView a MTD fix on OMAP with NAND" [ Obviously missed rc3, will make rc4 instead ;) ] * tag 'armsoc-for-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: drop list entry for davinci ARM: OMAP2+: Warn about deprecated legacy booting mode ARM: omap2plus_defconfig: Fix errors with NAND BCH ARM: multi_v7_defconfig: fix support for APQ8084 soc: versatile: Add terminating entry for realview_soc_of_match ARM: ixp4xx: remove compilation warnings in io.h MAINTAINERS: Add Soren as reviewer for Zynq ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in ARM: socfpga_defconfig: Update defconfig for SoCFPGA ARM: pxa: fix hang on startup with DEBUG_LL
-
- 03 11月, 2014 17 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fixes from Brian Norris: "Three main MTD fixes for 3.18: - A regression from 3.16 which was noticed in 3.17. With the restructuring of the m25p80.c driver and the SPI NOR library framework, we omitted proper listing of the SPI device IDs. This means m25p80.c wouldn't auto-load (modprobe) properly when built as a module. For now, we duplicate the device IDs into both modules. - The OMAP / ELM modules were depending on an implicit link ordering. Use deferred probing so that the new link order (in 3.18-rc) can still allow for successful probing. - Fix suspend/resume support for LH28F640BF NOR flash" * tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd: mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips mtd: omap: fix mtd devices not showing up mtd: m25p80,spi-nor: Fix module aliases for m25p80 mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id mtd: m25p80: get rid of spi_get_device_id
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of six patches consisting of: - two MAINTAINER updates - two scsi-mq fixs for the old parallel interface (not every request is tagged and we need to set the right flags to populate the SPI tag message) - a fix for a memory leak in scatterlist traversal caused by a preallocation update in 3.17 - an ipv6 fix for cxgbi" [ The scatterlist fix also came in separately through the block layer tree ] * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ufs - remove self MAINTAINERS: change hpsa and cciss maintainer libcxgbi : support ipv6 address host_param scsi: set REQ_QUEUE for the blk-mq case Revert "block: all blk-mq requests are tagged" lib/scatterlist: fix memory leak with scsi-mq
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Nothing too astounding or major: radeon, i915, vmwgfx, armada and exynos. Biggest ones: - vmwgfx has one big locking regression fix - i915 has come displayport fixes - radeon has some stability and a memory alloc failure - armada and exynos have some vblank fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits) drm/exynos: correct connector->dpms field before resuming drm/exynos: enable vblank after DPMS on drm/exynos: init kms poll at the end of initialization drm/exynos: propagate plane initialization errors drm/exynos: vidi: fix build warning drm/exynos: remove explicit encoder/connector de-initialization drm/exynos: init vblank with real number of crtcs drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size. drm/vmwgfx: Fix hash key computation drm/vmwgfx: fix lock breakage drm/i915/dp: only use training pattern 3 on platforms that support it drm/radeon: remove some buggy dead code drm/i915: Ignore VBT backlight check on Macbook 2, 1 drm/radeon: remove invalid pci id drm/radeon: dpm fixes for asrock systems radeon: clean up coding style differences in radeon_get_bios() drm/radeon: Use drm_malloc_ab instead of kmalloc_array drm/radeon/dpm: disable ulv support on SI drm/i915: Fix GMBUSFREQ on vlv/chv drm/i915: Ignore long hpds on eDP ports ...
-
由 Olof Johansson 提交于
Merge tag 'fixes-against-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.18-rc2" from Tony Lindgren: Few fixes for omaps to enable NAND BCH so devices won't produce errors when booted with omap2plus_defconfig, and reduce bloat by making IPV6 a loadable module. Also let's add a warning about legacy boot being deprecated for omap3. We now have things working with device tree, and only omap3 is still booting in legacy mode. So hopefully this warning will help move the remaining legacy mode users to boot with device tree. As the total reduction of code and static data is somewhere around 20000 lines of code once we remove omap3 legacy mode booting, we really do want to make omap3 to boot also in device tree mode only over the next few merge cycles. * tag 'fixes-against-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (407 commits) ARM: OMAP2+: Warn about deprecated legacy booting mode ARM: omap2plus_defconfig: Fix errors with NAND BCH ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in + Linux 3.18-rc2 Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: - add the new bpf syscall to ARM. - drop a redundant return statement in __iommu_alloc_remap() - fix a performance issue noticed by Thomas Petazzoni with kmap_atomic(). - fix an issue with the L2 cache OF parsing code which caused it to incorrectly print warnings on each boot, and make the warning text more consistent with the rest of the code * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn() ARM: 8183/1: l2c: Improve l2c310_of_parse() error message ARM: 8181/1: Drop extra return statement ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int' ARM: enable bpf syscall
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Paolo Bonzini: "A small set of x86 fixes. The most serious is an SRCU lockdep fix. A bit late - needed some time to test the SRCU fix, which only came in on Friday" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: vmx: defer load of APIC access page address during reset KVM: nVMX: Disable preemption while reading from shadow VMCS KVM: x86: Fix far-jump to non-canonical check KVM: emulator: fix execution close to the segment limit KVM: emulator: fix error code for __linearize
-
由 Dave Airlie 提交于
Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes This pull-request includes some bug fixes and code cleanups. Especially, this fixes the bind failure issue occurred when it tries to re-bind Exynos drm driver after unbound, and the modetest failure issue incurred by not having a pair to vblank on and off requests. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: correct connector->dpms field before resuming drm/exynos: enable vblank after DPMS on drm/exynos: init kms poll at the end of initialization drm/exynos: propagate plane initialization errors drm/exynos: vidi: fix build warning drm/exynos: remove explicit encoder/connector de-initialization drm/exynos: init vblank with real number of crtcs
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull VFS fixes from Al Viro: "A bunch of assorted fixes, most of them followups to overlayfs merge" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ovl: initialize ->is_cursor Return short read or 0 at end of a raw device, not EIO isofs: don't bother with ->d_op for normal case isofs_cmp(): we'll never see a dentry for . or .. overlayfs: fix lockdep misannotation ovl: fix check for cursor overlayfs: barriers for opening upper-layer directory rcu: Provide counterpart to rcu_dereference() for non-RCU situations staging: android: logger: Fix log corruption regression
-
由 Linus Torvalds 提交于
The sk_prot is irda's own set of protocol handlers, so irda should statically know what that function is anyway, without using an indirect pointer. And as it happens, we know *exactly* what that pointer is statically: it's NULL, because irda doesn't define a disconnect operation. So calling that function is doubly wrong, and will just cause an oops. Reported-by: NMartin Lang <mlg.hessigheim@gmail.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrzej Hajda 提交于
During system suspend after connector switch off its dpms field is set to connector previous dpms state. To properly resume dpms field should be set to its actual state (off) before resuming to previous dpms state. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Before DPMS off driver disables vblank. It should be balanced by vblank enable after DPMS on. The patch fixes issue with page_flip ioctl not being able to acquire vblank counter introduced by patch: drm: Always reject drm_vblank_get() after drm_vblank_off() Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HPD events can be generated by components even if drm_dev is not fully initialized, to skip such events kms poll initialization should be performed at the end of load callback followed directly by forced connection detection. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
In case of error during plane initialization load callback incorrectly return success, this patch fixes it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Inki Dae 提交于
encoder object isn't used anymore so remove it. Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
All KMS objects are destroyed by drm_mode_config_cleanup in proper order so component drivers should not care about it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Initialization of vblank with MAX_CRTC caused attempts to disabling vblanks for non-existing crtcs in case drm used fewer crtcs. The patch fixes it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-