- 19 3月, 2021 6 次提交
-
-
由 Shannon Nelson 提交于
Don't destroy the adminq while there is an outstanding request. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Up to now we've been ignoring any error return from the queue starting in the link status check, so we fix that here. If the driver had to reset and couldn't get things running properly again, for example after a Tx Timeout and the FW is not responding to commands, don't let the link watchdog try to restart the queues. At this point the user can try to DOWN and UP the device to clear the errors. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Block some actions while the FW is in a reset activity and the queues are not configured. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
We can get to the counter without going through the pointer that the robot complained about. Reported-by: Nkernel test robot <lkp@intel.com> Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
The qcq->intr.index was set when the queue was allocated, there is no need to reach around to find it. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Catch a couple of missing macro name uses, fix a couple of misspellings, etc. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 3月, 2021 2 次提交
-
-
由 Shannon Nelson 提交于
With a reconfigure of each queue is needed a rebuild of the matching debugfs information. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Clean up a couple of struct uses to make for better fast path access. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2020 2 次提交
-
-
由 Shannon Nelson 提交于
Order of operations is slightly more correct in the driver to change the netdev->mtu after the queues have been stopped rather than before. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Shannon Nelson 提交于
Remove memory allocation fail messages where the OOM stack trace will make it obvious which allocation request failed. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 24 11月, 2020 1 次提交
-
-
由 Jakub Kicinski 提交于
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 15 11月, 2020 7 次提交
-
-
由 Shannon Nelson 提交于
With a few more uses of true and false in function calls, we need to give them some useful names so we can tell from the calling point what we're doing. Signed-off-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Shannon Nelson 提交于
Instead of having two different ways of expressing the same sleepability concept, using opposite logic, we can rework the from_ndo to can_sleep for a more consistent usage. Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.") Signed-off-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Shannon Nelson 提交于
The _ionic_lif_rx_mode() is only used once and really doesn't need to be broken out. Signed-off-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Shannon Nelson 提交于
We should be using the multicast sync routines for the multicast filters. Also, let's just flatten the logic a bit and pull the small unicast routine back into ionic_set_rx_mode(). Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.") Signed-off-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Shannon Nelson 提交于
After the queues are stopped, expressly quiesce the lif. This assures that even if the queues were in an odd state, the firmware will close up everything cleanly. Signed-off-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Shannon Nelson 提交于
Request a link check as soon as the netdev is registered rather than waiting for the watchdog to go off in order to get the interface operational a little more quickly. Signed-off-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Shannon Nelson 提交于
Change the order of operations in the link_up handling to be sure that the queues are up and ready before we announce that the link is up. Signed-off-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 24 10月, 2020 2 次提交
-
-
由 Shannon Nelson 提交于
Kmemleak pointed out to us that ionic_rx_flush() is sending skbs into napi_gro_XXX with a disabled napi context, and these end up getting lost and leaked. We can safely remove the flush. Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Shannon Nelson 提交于
The sparse complaints around the static_asserts were obscuring more useful complaints. So, don't check the static_asserts, and fix the remaining sparse complaints. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 03 10月, 2020 7 次提交
-
-
由 Shannon Nelson 提交于
Use the lif's ident information for the uc and mc filter counts rather than the ionic's version, to be sure we're getting the info that is specific to this lif. While we're thinking about it, add some missing error checking where we get the lif's identity information. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
After we do a fw upgrade and refill the ionic->ident.dev, we also need to update the other identity info. Since the lif identity needs to be updated each time the ionic identity is refreshed, we can pull it into ionic_identify(). The debugfs entry is moved so that it doesn't cause an error message when the data is refreshed after the fw upgrade. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Some time ago we short-circuited the queue disables on a timeout error in order to not have to wait on every queue when we already know it will time out. However, this meant that we're not properly stopping all the interrupts and napi contexts. This changes queue disable to always call ionic_qcq_disable() and to give it an argument to know when to not do the adminq request. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
There are a couple of error recovery paths that can come through ionic_qcq_disable() without having set up the qcq, so we need to make sure we have a valid qcq pointer before using it. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Clear our link check requested flag on an allocation error. We end up dropping this link check request, but that should be fine as our watchdog will come back a few seconds later and request it again. Reported-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Check through our work list for additional items. This normally will only have one item, but occasionally may have another job waiting. There really is no need reschedule ourself here. Reported-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
The event notification queue is set up a little differently in the NIC and so the notifyq q and cq descriptor structures need to be contiguous, which got missed in an earlier patch that separated out the q and cq descriptor allocations. That patch was aimed at making the big tx and rx descriptor queue allocations easier to manage - the notifyq is much smaller and doesn't need to be split. This patch simply adds an if/else and slightly different code for the notifyq descriptor allocation. Fixes: ea5a8b09 ("ionic: reduce contiguous memory allocation requirement") Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 9月, 2020 1 次提交
-
-
The in_interrupt() usage in this driver tries to figure out which context may sleep and which context may not sleep. in_interrupt() is not really suitable as it misses both preemption disabled and interrupt disabled invocations from task context. Conditionals like that in driver code are frowned upon in general because invocations of functions from invalid contexts might not be detected as the conditional papers over it. ionic_lif_addr() and _ionoc_lif_rx_mode() can be called from: 1) ->ndo_set_rx_mode() which is under netif_addr_lock_bh()) so it must not sleep. 2) Init and setup functions which are in fully preemptible task context. ionic_link_status_check_request() has two call paths: 1) NAPI which obviously cannot sleep 2) Setup which is again fully preemptible task context Add arguments which convey the execution context to the affected functions and let the callers provide the context instead of letting the functions deduce it. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2020 1 次提交
-
-
由 Shannon Nelson 提交于
Use the dim library to manage dynamic interrupt moderation in ionic. v3: rebase v2: untangled declarations in ionic_dim_work() Signed-off-by: NShannon Nelson <snelson@pensando.io> Acked-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 9月, 2020 1 次提交
-
-
由 Shannon Nelson 提交于
Clean and rebuild the debugfs info for the queues being swapped. Fixes: a34e25ab ("ionic: change the descriptor ring length without full reset") Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2020 1 次提交
-
-
由 Shannon Nelson 提交于
The only thing calling ionic_napi any more is the adminq processing, so combine and simplify. Co-developed-by: NNeel Patel <neel@pensando.io> Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2020 9 次提交
-
-
由 Shannon Nelson 提交于
Convert tx_timeout handler to not do the full reset. As this was the last user of ionic_reset_queues(), we can drop it. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Add to our new ionic_reconfigure_queues() to also be able to change the number of queues in use, and to change the queue interrupt layout between split and combined. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
The original way of changing ring length was to completely tear down the lif's queue structure and then rebuild it, while running the risk of allocations that might fail in the middle and leave us with a broken driver. Instead, we can set up all the new queue and descriptor allocations first, then swap them out and delete the old allocations. If the new allocations fail, we report the error, stay with the old setup and continue running. This gives us a safer path, and a smaller window of time where we're not processing traffic. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
We really don't need to tear down and rebuild the whole queue structure when changing the MTU; we can simply stop the queues, clean and refill, then restart the queues. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Use index counters rather than pointers for tracking head and tail in the queues to save a little memory and to perhaps slightly faster queue processing. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Split out the queue descriptor blocks into separate dma allocations to make for smaller blocks. Co-developed-by: NNeel Patel <neel@pensando.io> Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
ionic_open() and ionic_stop() are not referenced outside of their defining file, so make them static. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Use a block of stats structs attached to the lif instead of little ones attached to each qcq. This simplifies our memory management and gets rid of a lot of unnecessary indirection. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
As we aren't yet supporting multiple lifs, we can remove complexity by removing the list concept and related code, to be re-engineered later when actually needed. Signed-off-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-