The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
further bdev cleanups.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Print the error messages using the helpers that also print the
filesystem identification.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The write_locks is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The spinning_writers is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The blocking_writers is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The function has a lot of return values and specific conventions making
it cumbersome to understand what's returned. Have a go at documenting
its parameters and return values.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently find_first_clear_extent_bit always returns a range whose
starting value is >= passed 'start'. This implicit trimming behavior is
somewhat subtle and an implementation detail.

Instead, this patch modifies the function such that now it always
returns the range which contains passed 'start' and has the given bits
unset. This range could either be due to presence of existing records
which contains 'start' but have the bits unset or because there are no
records that contain the given starting offset.

This patch also adds test cases which cover find_first_clear_extent_bit
since they were missing up until now.
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There several functions which open code
btrfs_lock_and_flush_ordered_range, just replace them with a call to the
function. No functional changes.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

At the context of btrfs_run_delalloc_range(), we haven't started/joined
a transaction, thus even something went wrong, we can't and won't abort
transaction, thus no way to make the fs RO.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_check_shared looks up parents of a given extent and uses ulists
for that. These are allocated and freed repeatedly. Preallocation in the
caller will avoid the overhead and also allow us to use the GFP_KERNEL
as it is happens before the extent locks are taken.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.
Suggested-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NDavid Sterba <dsterba@suse.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Acked-by: NColy Li <colyli@suse.de>
Reviewed-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

None of the implementers of the submit_bio_hook use the bio_offset
parameter, simply remove it. No functional changes.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function always uses the btree inode's io_tree. Stop taking the
tree as a function argument and instead access it internally from
read_extent_buffer_pages. No functional changes.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function is very similar to find_first_extent_bit except that it
locates the first contiguous span of space which does not have bits set.
It's intended use is in the freespace trimming code.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It will be used in a future patch that will require modifying an
extent_io_tree struct under a spinlock.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function is going to be used to clear out the device extent
allocation information. Give it a more generic name and export it. This
is in preparation to replacing the pending/pinned chunk lists with an
extent tree. No functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We can read fs_info from extent buffer and can drop it from the
parameters. As all callsites are updated, add the btrfs_ prefix as the
function is exported.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

BUG_ON(1) leads to bogus warnings from clang when
CONFIG_PROFILE_ANNOTATED_BRANCHES is set:

fs/btrfs/volumes.c:5041:3: error: variable 'max_chunk_size' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
                BUG_ON(1);
                ^~~~~~~~~
include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
 #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                                   ^~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
 #  define unlikely(x)   (__branch_check__(x, 0, __builtin_constant_p(x)))
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/btrfs/volumes.c:5046:9: note: uninitialized use occurs here
                             max_chunk_size);
                             ^~~~~~~~~~~~~~
include/linux/kernel.h:860:36: note: expanded from macro 'min'
 #define min(x, y)       __careful_cmp(x, y, <)
                                         ^
include/linux/kernel.h:853:17: note: expanded from macro '__careful_cmp'
                __cmp_once(x, y, __UNIQUE_ID(__x), __UNIQUE_ID(__y), op))
                              ^
include/linux/kernel.h:847:25: note: expanded from macro '__cmp_once'
                typeof(y) unique_y = (y);               \
                                      ^
fs/btrfs/volumes.c:5041:3: note: remove the 'if' if its condition is always true
                BUG_ON(1);
                ^
include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
 #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                               ^
fs/btrfs/volumes.c:4993:20: note: initialize the variable 'max_chunk_size' to silence this warning
        u64 max_chunk_size;
                          ^
                           = 0

Change it to BUG() so clang can see that this code path can never
continue.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Long time ago (2008), the extent buffers were organized in a LRU list
and switched to rb-tree in 6af118ce ("Btrfs: Index extent
buffers in an rbtree"). There was one stale macro definition left.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We can only get <=0 from extent_write_cache_pages, add an ASSERT() for
it just in case.

Then instead of submitting the write bio even if we got some error,
check the return value first.
If we have already hit some error, just clean up the corrupted or
half-baked bio, and return error.

If there is no error so far, then call flush_write_bio() and return the
result.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function needs some extra checks on locked pages and eb.  For error
handling we need to unlock locked pages and the eb.

There is a rare >0 return value branch, where all pages get locked
while write bio is not flushed.

Thankfully it's handled by the only caller, btree_write_cache_pages(),
as later write_one_eb() call will trigger submit_one_bio().  So there
shouldn't be any problem.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We can only get @ret <= 0.  Add an ASSERT() for it just in case.

Then, instead of submitting the write bio even we got some error, check
the return value first.

If we have already hit some error, just clean up the corrupted or
half-baked bio, and return error.

If there is no error so far, then call flush_write_bio() and return the
result.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since __extent_writepage() will no longer return >0 value,
(ret == AOP_WRITEPAGE_ACTIVATE) will never be true.

Kill that dead branch.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In btree_write_cache_pages(), we can only get @ret <= 0.
Add an ASSERT() for it just in case.

Then instead of submitting the write bio even we got some error, check
the return value first.
If we have already hit some error, just clean up the corrupted or
half-baked bio, and return error.

If there is no error so far, then call flush_write_bio() and return the
result.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since now flush_write_bio() could return error, kill the BUG_ON() first.
Then don't call flush_write_bio() unconditionally, instead we check the
return value from __extent_writepage() first.

If __extent_writepage() fails, we do cleanup, and return error without
submitting the possible corrupted or half-baked bio.

If __extent_writepage() successes, then we call flush_write_bio() and
return the result.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have a BUG_ON() in flush_write_bio() to handle the return value of
submit_one_bio().

Move the BUG_ON() one level up to all its callers.

This patch will introduce temporary variable, @flush_ret to keep code
change minimal in this patch. That variable will be cleaned up when
enhancing the error handling later.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In case we hit the error case for a metadata buffer in
end_bio_extent_readpage then 'ret' won't really be checked before it's
written again to. This means the -EIO in this case will never be
checked, just remove it.

Fixes-coverity-id: 1442513
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently extent_readpages (called from btrfs_readpages) will always
call __extent_readpages which tries to create contiguous range of pages
and call __do_contiguous_readpages when such contiguous range is
created.

It turns out this is unnecessary due to the fact that generic MM code
always calls filesystem's ->readpages callback (btrfs_readpages in
this case) with already contiguous pages. Armed with this knowledge it's
possible to simplify extent_readpages by eliminating the call to
__extent_readpages and directly calling contiguous_readpages.

The only edge case that needs to be handled is when
add_to_page_cache_lru fails. This is easy as all that is needed is to
submit whatever is the number of pages successfully added to the lru.
This can happen when the page is already in the range, so it does not
need to be read again, and we can't do anything else in case of other
errors.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The member is tracking simple status of the lock, we can use bool for
that and make some room for further space reduction in the structure.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::write_locks become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::read_locks become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::spining_readers become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::spining_writers become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This flag just became synonymous to EXTENT_LOCKED, so just remove it and
used EXTENT_LOCKED directly. No functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This flag was introduced in a52d9a80 ("Btrfs: Extent based page
cache code.") and subsequently it's usage effectively was removed by
1edbb734 ("Btrfs: reduce CPU usage in the extent_state tree") and
f2a97a9d ("btrfs: remove all unused functions"). Just remove it,
no functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Although btrfs heavily relies on extent_io_tree, we don't really have
any good trace events for them.

This patch will add the folowing trace events:
- trace_btrfs_set_extent_bit()
- trace_btrfs_clear_extent_bit()
- trace_btrfs_convert_extent_bit()

Since selftests could create temporary extent_io_tree without fs_info,
modify TP_fast_assign_fsid() to accept NULL as fs_info.  NULL fs_info
will lead to all zero fsid.

The output would be:
  btrfs_set_extent_bit: <FDID>: io_tree=INODE_IO ino=1 root=1 start=22036480 len=4096 set_bits=LOCKED
  btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22040576 len=4096 set_bits=LOCKED
  btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22044672 len=4096 set_bits=LOCKED
  btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22048768 len=4096 set_bits=LOCKED
  btrfs_clear_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22036480 len=16384 clear_bits=LOCKED
  ^^^ Extent buffer 22036480 read from disk, the locking progress

  btrfs_set_extent_bit: <FSID>: io_tree=TRANS_DIRTY_PAGES ino=1 root=1 start=30425088 len=16384 set_bits=DIRTY
  btrfs_set_extent_bit: <FSID>: io_tree=TRANS_DIRTY_PAGES ino=1 root=1 start=30441472 len=16384 set_bits=DIRTY
  ^^^ 2 new tree blocks allocated in one transaction

  btrfs_set_extent_bit: <FSID>: io_tree=FREED_EXTENTS0 ino=0 root=0 start=30523392 len=16384 set_bits=DIRTY
  btrfs_set_extent_bit: <FSID>: io_tree=FREED_EXTENTS0 ino=0 root=0 start=30556160 len=16384 set_bits=DIRTY
  ^^^ 2 old tree blocks get pinned down

There is one point which need attention:
1) Those trace events can be pretty heavy:
   The following workload would generate over 400 trace events.

	mkfs.btrfs -f $dev
	start_trace
	mount $dev $mnt -o enospc_debug
	sync
	touch $mnt/file1
	touch $mnt/file2
	touch $mnt/file3
	xfs_io -f -c "pwrite 0 16k" $mnt/file4
	umount $mnt
	end_trace

   It's not recommended to use them in real world environment.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ rename enums ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>