When device gone, it will check whether it is during reset, if not, it will
send internal task abort. Before internal task abort returned, reset
begins, and it will check whether SAS_PHY_UNUSED is set, if not, it will
call hisi_sas_init_device(), but at that time domain_device may already be
freed or part of it is freed, so it may referenece null pointer in
hisi_sas_init_device(). It may occur as follows:

    thread0				thread1
hisi_sas_dev_gone()
    check whether in RESET(no)
    internal task abort
				    reset prep
				    soft_reset
				    ... (part of reset_done)
    internal task abort failed
    release resource anyway
    clear_itct
    device->lldd_dev=NULL
				    hisi_sas_reset_init_all_device
					check sas_dev->dev_type is SAS_PHY_UNUSED and
					!device
    set dev_type SAS_PHY_UNUSED
    sas_free_device
					hisi_sas_init_device
					...

Semaphore hisi_hba.sema is used to sync the processes of device gone and
host reset.

To solve the issue, expand the scope that semaphore protects and let them
never occur together.

And also some places will check whether domain_device is NULL to judge
whether the device is gone. So when device gone, need to clear
sas_dev->sas_device.

Link: https://lore.kernel.org/r/1567774537-20003-14-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add BIST (built in self test) support for phy loopback.

Through the new debugfs interface, the user can configure loopback
mode/linkrate/phy id/code mode before enabling it. And also user can
enable/disable BIST function.

Link: https://lore.kernel.org/r/1567774537-20003-13-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We extract the code of memory allocate and construct an new function for
it. We think it's convenient for subsequent optimization.

Link: https://lore.kernel.org/r/1567774537-20003-12-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some function arguments are unused, so remove them.

Also move the timeout print in for wait_cmds_complete_timeout_vX_hw()
callsites into that same function.

Link: https://lore.kernel.org/r/1567774537-20003-11-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove redundant work declaration in HISI_SAS_DECLARE_RST_WORK_ON_STACK

Link: https://lore.kernel.org/r/1567774537-20003-10-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We never call hisi_sas_hw.slot_complete, so remove it.

Link: https://lore.kernel.org/r/1567774537-20003-9-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently the NCQ tag is only assigned for FPDMA READ and FPDMA WRITE
commands, and for other NCQ commands (such as FPDMA SEND), their NCQ tags
are set in the delivery command to 0.

So for all the NCQ commands, we also need to assign normal NCQ tag for
them, so drop the command type check in hisi_sas_get_ncq_tag() [drop
hisi_sas_get_ncq_tag() altogether actually], and always use the ATA command
NCQ tag when appropriate.

Link: https://lore.kernel.org/r/1567774537-20003-8-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After suspend and resume, the HW registers will be set back to their
initial value. We use init_reg_v3_hw() to set some registers, but some
registers are set via firmware in ACPI "_RST" method, so add reset handler
before init_reg_v3_hw().

Link: https://lore.kernel.org/r/1567774537-20003-7-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When init device for SAS disks, it will send TMF IO to clear disks. At that
time TMF IO is broken by some operations such as injecting controller reset
from HW RAs event, the TMF IO will be timeout, and at last device will be
gone. Print is as followed:

hisi_sas_v3_hw 0000:74:02.0: dev[240:1] found
...
hisi_sas_v3_hw 0000:74:02.0: controller resetting...
hisi_sas_v3_hw 0000:74:02.0: phyup: phy7 link_rate=10(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy0 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy2 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy3 link_rate=9(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy6 link_rate=10(sata)
hisi_sas_v3_hw 0000:74:02.0: phyup: phy5 link_rate=11
hisi_sas_v3_hw 0000:74:02.0: phyup: phy4 link_rate=11
hisi_sas_v3_hw 0000:74:02.0: controller reset complete
hisi_sas_v3_hw 0000:74:02.0: abort tmf: TMF task timeout and not done
hisi_sas_v3_hw 0000:74:02.0: dev[240:1] is gone
sas: driver on host 0000:74:02.0 cannot handle device 5000c500a75a860d,
error:5

To improve the reliability, retry TMF IO max of 3 times for SAS disks which
is the same as softreset does.

Link: https://lore.kernel.org/r/1567774537-20003-6-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

At expander environment, we delay after issue phy reset to wait for
hardware to handle phy reset. But if sas_smp_phy_control() fails, the
delay is unnecessary so remove it.

Link: https://lore.kernel.org/r/1567774537-20003-5-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

At hisi_sas_debug_I_T_nexus_reset(), we call sas_phy_reset() to reset a
phy. But if the phy is disabled, sas_phy_reset() will directly return
-ENODEV without issue a phy reset request.

If so, We can directly return -ENODEV to libsas before issue a phy
reset.

Link: https://lore.kernel.org/r/1567774537-20003-4-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When calling sas_phy_reset(), we need to specify whether the reset type
is hard reset or link reset - use true/false for clarity.

Link: https://lore.kernel.org/r/1567774537-20003-3-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This trigger is add at _hisi_sas_internal_task_abort()

Link: https://lore.kernel.org/r/1567774537-20003-2-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The event handler calls scsi_scan_host() when events are missed, which will
hotplug new LUNs.  However, this function won't remove any unplugged LUNs.
The result is that hotunplug doesn't work properly when the number of
unplugged LUNs exceeds the event queue size (currently 8).

Scan existing LUNs when events are missed to check if they are still
present.  If not, remove them.

Link: https://lore.kernel.org/r/20190905181903.29756-1-mlupfer@ddn.comSigned-off-by: NMatt Lupfer <mlupfer@ddn.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

cdb in send_mode_select() is not zeroed and is only partially filled in
rdac_failover_get(), which leads to some random data getting to the
device. Users have reported storage responding to such commands with
INVALID FIELD IN CDB. Code before commit 32782557 was not affected, as
it called blk_rq_set_block_pc().

Fix this by zeroing out the cdb first.

Identified & fix proposed by HPE.

Fixes: 32782557 ("scsi_dh_rdac: switch to scsi_execute_req_flags()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20190904155205.1666-1-martin.wilck@suse.comSigned-off-by: NMartin Wilck <mwilck@suse.com>
Acked-by: NAles Novak <alnovak@suse.cz>
Reviewed-by: NShane Seymour <shane.seymour@hpe.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In fcoe_if_init, if fc_attach_transport(&fcoe_vport_fc_functions)
fails, need to free the previously memory and return fail, otherwise
will trigger null-ptr-deref Read in fc_release_transport.

fcoe_exit
  fcoe_if_exit
    fc_release_transport(fcoe_vport_scsi_transport)

Link: https://lore.kernel.org/r/1566279789-58207-1-git-send-email-zhengbin13@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Link: https://lore.kernel.org/r/20190904130457.24744-1-yuehaibing@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Acked-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Link: https://lore.kernel.org/r/20190904130348.24772-1-yuehaibing@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Link: https://lore.kernel.org/r/20190904130256.24704-1-yuehaibing@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use kmemdup rather than duplicating its implementation

Link: https://lore.kernel.org/r/20190831124424.18642-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Specify the UFS device-reset gpio for db845c and mtp, so that the
controller will issue a reset of the UFS device.

Link: https://lore.kernel.org/r/20190828191756.24312-4-bjorn.andersson@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NAvri Altman <Avri.Altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The UFS_RESET pin on Qualcomm SoCs are controlled by TLMM and exposed
through the GPIO framework. Acquire the device-reset GPIO and use this to
implement the device_reset vops, to allow resetting the attached memory.

Based on downstream support implemented by Subhash Jadavani
<subhashj@codeaurora.org>.

Link: https://lore.kernel.org/r/20190828191756.24312-3-bjorn.andersson@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NAvri Altman <Avri.Altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some UFS memory devices needs their reset line toggled in order to get them
into a good state for initialization. Provide a new vops to allow the
platform driver to implement this operation.

Link: https://lore.kernel.org/r/20190828191756.24312-2-bjorn.andersson@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Acked-by: NAvri Altman <Avri.Altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

A recent patch unconditionally marks the hba as in error as part of
resetting the adapter. The driver flow that called the adapter reset was a
recovery path, which expects the adapter to not be in an error state in
order to finish the recovery.  Given the new error state being set, the
recovery fails and the adapter is left in limbo.

Revise the adapter reset routine so that it will only mark the adapter in
error if it was unable to reset the adapter.

Fixes: 8c24a4f6 ("scsi: lpfc: Fix crash due to port reset racing vs adapter error handling")
Link: https://lore.kernel.org/r/20190903215441.10490-1-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Convert the remaining %pf users to %ps to prepare for the removal of the
old %pf conversion specifier support.

Fixes: 32350664 ("scsi: lpfc: Migrate to %px and %pf in kernel print calls")
Link: https://lore.kernel.org/r/20190904160423.3865-1-sakari.ailus@linux.intel.comSigned-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-7-hmadhani@marvell.comSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On fast cable pull, where driver is unable to detect device has disappeared
and came back based on switch info, qla2xxx would not re-login while remote
port has already invalidated the session.  This causes IO timeout.  This
patch would relogin to remote device for RSCN affected port.
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-6-hmadhani@marvell.comSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Login session was stucked on cable pull. When FW is in the middle PRLI
PENDING + driver is in Initiator mode, driver fails to check back with FW to
see if the PRLI has completed. This patch would re-check with FW again to
make sure PRLI would complete before pushing forward with relogin.
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-5-hmadhani@marvell.comSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

HINT_MBX_INT_PENDING is not guaranteed to be cleared by firmware. Remove
check that prevent driver load with ISP82XX.
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-4-hmadhani@marvell.comSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use adapter specific callback to read flash instead of ISP adapter
specific.
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-3-hmadhani@marvell.comSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch updates log message which indicates number of vectors used by
the driver instead of displaying failure to get maximum requested
vectors. Driver will always request maximum vectors during
initialization. In the event driver is not able to get maximum requested
vectors, it will adjust the allocated vectors. This is normal and does not
imply failure in driver.
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Link: https://lore.kernel.org/r/20190830222402.23688-2-hmadhani@marvell.comSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For commands completing with a resid not aligned on the device logical
sector size, also print the command CDB in addition to the current message
to help debug hardware generating such incorrect command completion
information.

Link: https://lore.kernel.org/r/20190828053511.14818-1-damien.lemoal@wdc.comSigned-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

pci_alloc_irq_vectors() returns number of vectors allocated.  Fix the check
for error condition.

Fixes: cca678df ("scsi: fnic: switch to pci_alloc_irq_vectors")
Link: https://lore.kernel.org/r/20190827211340.1095-1-gvaradar@cisco.comSigned-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com>
Acked-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Port speed printing was added by commit d948e638 ("scsi: fnic: Add port
speed stat to fnic debug stats"). As currently configured, this will cause
the port speed to be printed to syslog every 2 seconds. To prevent log
spamming, only print the vnic port speed at driver initialization and if
the speed changes. Also clean up a small typo in fnic_trace.c.

Fixes: d948e638 ("scsi: fnic: Add port speed stat to fnic debug stats")
Signed-off-by: NJohn Pittman <jpittman@redhat.com>
Reviewed-by: NSatish Kharat <satishkh@cisco.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/bnx2fc/bnx2fc_hwi.c: In function bnx2fc_process_unsol_compl:
drivers/scsi/bnx2fc/bnx2fc_hwi.c:636:30: warning: variable task set but not used [-Wunused-but-set-variable]
drivers/scsi/bnx2fc/bnx2fc_hwi.c: In function bnx2fc_process_ofld_cmpl:
drivers/scsi/bnx2fc/bnx2fc_hwi.c:1125:21: warning: variable port set but not used [-Wunused-but-set-variable]
drivers/scsi/bnx2fc/bnx2fc_hwi.c: In function bnx2fc_init_seq_cleanup_task:
drivers/scsi/bnx2fc/bnx2fc_hwi.c:1468:30: warning: variable orig_task set but not used [-Wunused-but-set-variable]
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Acked-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/bnx2fc/bnx2fc_io.c: In function bnx2fc_initiate_seq_cleanup:
drivers/scsi/bnx2fc/bnx2fc_io.c:932:19: warning: variable lport set but not used [-Wunused-but-set-variable]
drivers/scsi/bnx2fc/bnx2fc_io.c: In function bnx2fc_initiate_cleanup:
drivers/scsi/bnx2fc/bnx2fc_io.c:1001:19: warning: variable lport set but not used [-Wunused-but-set-variable]
drivers/scsi/bnx2fc/bnx2fc_io.c: In function bnx2fc_process_scsi_cmd_compl:
drivers/scsi/bnx2fc/bnx2fc_io.c:1882:20: warning: variable host set but not used [-Wunused-but-set-variable]
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Acked-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function bnx2fc_rcv:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:431:26: warning: variable fh set but not used [-Wunused-but-set-variable]
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Acked-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the driver version to 8.42.3.0.
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is a race b/w fipvlan request and response path:

=====
qedf_fcoe_process_vlan_resp:113]:2: VLAN response, vid=0xffd.
qedf_initiate_fipvlan_req:165]:2: vlan = 0x6ffd already set.
qedf_set_vlan_id:139]:2: Setting vlan_id=0ffd prio=3.
======

The request thread sees that vlan is already set and fails to call
ctrl_link_up.

Fix:

 - While setting vlan_id use local variable and before setting vlan_id.

 - Call fcoe_ctlr_link_up in next iteration of fipvlan request.
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The list of rports might become stale so we should rather traverse the
discovery list when trying relogin.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>