For the received packets with payload less or equal 8DWS
RxDmaDataFifoRdUncErr is not reported. There is set RHF.EccErr
if the header is not suppressed. When such packet is detected
on the send side the header suppression mechanism is disabled
by clearing SH bit in the packet header.
Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Both the 8051 memory and LCB register access require multiple
steps and coordination with the driver.  This cannot be safely
done with resource0 alone.

The 8051 memory is exported read-only.  LCB is exported read/write.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

qp->r_aflags is already protected by qp->r_lock, therefore,
test_and_clear_bit() doesn't need to be atomic. Profile
shows this function call is costly.

Change the test_and_clear_bit() call to use the non-atomic
variant.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When reading multiple dc8051 data memory locations
at once, the read enabled field must be toggled
at every address change.  Do that by writing only
the address first, then writing the enable.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add the ability to read the new EPROM format.
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Both pio_buf and send_context structs have oversized
fields and have cachelines that can be optimized.

Reduce oversized fields for both structs.
Make sure pio_buf struct fits within a cacheline.
Move read-only fields to their own cacheline in
send_context struct.

All of this will avoid cacheline trading as the ring
progresses and pio buffers/send contexts are used.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The div instruction shows costly in profiles.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use scratch registers within the HFI1 device to recover signal
integrity information that is then used to tune the channel. While
there, update error messages to better convey the result of falling
back to a backup file.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Profiling shows hot path struct members that need
to be in a minimum set of cachelines.

Group these struct member in the same cacheline:
	sc2vl_lock
	sc2vl
	rhf_rcv_function_map
	rcv_limit
	rhf_offset

Group these struct member in the same cacheline:
	process_pio_send
	process_dma_send
	pport
	rcd
	int_counter
	flags
	num_pports
	first_user_ctxt

Fill holes in struct hfi1_devdata revealed by pahole.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch consolidates the node GUIDs and the port GUID handling
and unifies access to these items. The knowledge of hfi1 GUIDs'
design and their location are kept in accessors to centralize access.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move buffers_allocated pcpu pointer to allocator line.

Move hw_free pointer to releaser line.

Fill other holes revealed by pahole.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Profiling shows that the key validation is susceptible
to cache line trading when accessing the lkey table.

Fix by separating out the read mostly fields from the write
fields.   In addition the shift amount, which is function
of the lkey table size, is precomputed and stored with the
table pointer.   Since both the shift and table pointer
are in the same read mostly cacheline, this saves a cache
line in this hot path.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Short circuit sdma_txclean() by adding an __sdma_txclean()
that is only called when the tx has sdma mappings.

Convert internal calls to __sdma_txclean().

This removes a call from the critical path.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Profiling suggests that the read_seqbegin() in
the txreq put logic is colliding with other uses
of the iowait lock.

The packet at a time use of this lock dictates a unique
lock to avoid reader/writer collisions when the number
of vTxWait events is low.

In order to support a unique lock the iowait struct embedded
in the QP is extended to remember the lock that protects the queue
head.

The QP destroy removes that QP from any wait list.  It doesn't
need to know the head because of the linked list API, but it does
need to know the lock required to protect the head.

This also opens up the wait logic to have unique per resources locks
which needs to be in future refinement.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This removes the 'write' and 'force' from get_user_pages_remote() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.
Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add error handling support.
Register ib device with ib stack.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for GSI over light L2.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add light L2 interface for RoCE.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Implement fastpath verbs like ib_send_post, ib_post_recv and ib_poll_cq.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for user, dma and memory regions registration.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for Queue Pair verbs which adds, deletes,
modifies and queries Queue Pairs.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for protection domain and completion queue verbs.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for ucontext, query port, add and del gid verbs.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allocate and setup RoCE resources, interrupts and completion queues.
Adds device attributes.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adds a skeletal implementation of the qed* RoCE driver -
basically the ability to communicate with the qede driver and
receive notifications from it regarding various init/exit events.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A good practice is to prefix the names of functions by the name
of the subsystem.

The kthread worker API is a mix of classic kthreads and workqueues.  Each
worker has a dedicated kthread.  It runs a generic function that process
queued works.  It is implemented as part of the kthread subsystem.

This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:

__init_kthread_worker()		-> __kthread_init_worker()
init_kthread_worker()		-> kthread_init_worker()
init_kthread_work()		-> kthread_init_work()
insert_kthread_work()		-> kthread_insert_work()
queue_kthread_work()		-> kthread_queue_work()
flush_kthread_work()		-> kthread_flush_work()
flush_kthread_worker()		-> kthread_flush_worker()

Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.

Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:

  + "init" in the function names stands for the verb "initialize"
    aka "initialize worker". While "INIT" in the macro names
    stands for the noun "INITIALIZER" aka "worker initializer".

  + INIT() macros are used only in DEFINE() macros

  + init() functions are used close to the other kthread()
    functions. It looks much better if all the functions
    use the same scheme.

  + There will be also kthread_destroy_worker() that will
    be used close to kthread_cancel_work(). It is related
    to the init() function. Again it looks better if all
    functions use the same naming scheme.

  + there are several precedents for such init() function
    names, e.g. amd_iommu_init_device(), free_area_init_node(),
    jump_label_init_type(),  regmap_init_mmio_clk(),

  + It is not an argument but it was inconsistent even before.

[arnd@arndb.de: fix linux-next merge conflict]
 Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.comSuggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When processing a REG_MR work request, if fw supports the
FW_RI_NSMR_TPTE_WR work request, and if the page list for this
registration is <= 2 pages, and the current state of the mr is INVALID,
then use FW_RI_NSMR_TPTE_WR to pass down a fully populated TPTE for FW
to write.  This avoids FW having to do an async read of the TPTE blocking
the SQ until the read completes.

To know if the current MR state is INVALID or not, iw_cxgb4 must track the
state of each fastreg MR.  The c4iw_mr struct state is updated as REG_MR
and LOCAL_INV WRs are posted and completed, when a reg_mr is destroyed,
and when RECV completions are processed that include a local invalidation.

This optimization increases small IO IOPS for both iSER and NVMF.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Function ib_create_qp() was failing to return an error when
rdma_rw_init_mrs() fails, causing a crash further down in ib_create_qp()
when trying to dereferece the qp pointer which was actually a negative
errno.

The crash:

crash> log|grep BUG
[  136.458121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
crash> bt
PID: 3736   TASK: ffff8808543215c0  CPU: 2   COMMAND: "kworker/u64:2"
 #0 [ffff88084d323340] machine_kexec at ffffffff8105fbb0
 #1 [ffff88084d3233b0] __crash_kexec at ffffffff81116758
 #2 [ffff88084d323480] crash_kexec at ffffffff8111682d
 #3 [ffff88084d3234b0] oops_end at ffffffff81032bd6
 #4 [ffff88084d3234e0] no_context at ffffffff8106e431
 #5 [ffff88084d323530] __bad_area_nosemaphore at ffffffff8106e610
 #6 [ffff88084d323590] bad_area_nosemaphore at ffffffff8106e6f4
 #7 [ffff88084d3235a0] __do_page_fault at ffffffff8106ebdc
 #8 [ffff88084d323620] do_page_fault at ffffffff8106f057
 #9 [ffff88084d323660] page_fault at ffffffff816e3148
    [exception RIP: ib_create_qp+427]
    RIP: ffffffffa02554fb  RSP: ffff88084d323718  RFLAGS: 00010246
    RAX: 0000000000000004  RBX: fffffffffffffff4  RCX: 000000018020001f
    RDX: ffff880830997fc0  RSI: 0000000000000001  RDI: ffff88085f407200
    RBP: ffff88084d323778   R8: 0000000000000001   R9: ffffea0020bae210
    R10: ffffea0020bae218  R11: 0000000000000001  R12: ffff88084d3237c8
    R13: 00000000fffffff4  R14: ffff880859fa5000  R15: ffff88082eb89800
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
#10 [ffff88084d323780] rdma_create_qp at ffffffffa0782681 [rdma_cm]
#11 [ffff88084d3237b0] nvmet_rdma_create_queue_ib at ffffffffa07c43f3 [nvmet_rdma]
#12 [ffff88084d323860] nvmet_rdma_alloc_queue at ffffffffa07c5ba9 [nvmet_rdma]
#13 [ffff88084d323900] nvmet_rdma_queue_connect at ffffffffa07c5c96 [nvmet_rdma]
#14 [ffff88084d323980] nvmet_rdma_cm_handler at ffffffffa07c6450 [nvmet_rdma]
#15 [ffff88084d3239b0] iw_conn_req_handler at ffffffffa0787480 [rdma_cm]
#16 [ffff88084d323a60] cm_conn_req_handler at ffffffffa0775f06 [iw_cm]
#17 [ffff88084d323ab0] process_event at ffffffffa0776019 [iw_cm]
#18 [ffff88084d323af0] cm_work_handler at ffffffffa0776170 [iw_cm]
#19 [ffff88084d323cb0] process_one_work at ffffffff810a1483
#20 [ffff88084d323d90] worker_thread at ffffffff810a211d
#21 [ffff88084d323ec0] kthread at ffffffff810a6c5c
#22 [ffff88084d323f50] ret_from_fork at ffffffff816e1ebf

Fixes: 632bc3f6 ("IB/core, RDMA RW API: Do not exceed QP SGE send limit")
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Avoid that mapping an sg-list in which the first element has a
non-zero offset triggers an infinite loop when using FMR. This
patch makes the FMR mapping code similar to that of ib_sg_to_pages().

Note: older Mellanox HCAs do not support non-zero offsets for FMR.
See also commit 8c4037b5 ("IB/srp: always avoid non-zero offsets
into an FMR").
Reported-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Document that ib_map_mr_sg() is able to map physically discontiguous
sg-lists as a single MR. Change IB_MR_TYPE_SG_GAPS_REG into
IB_MR_TYPE_SG_GAPS.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@rimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In MLX qp packets, the LRH (built by the driver) has both a VL field
and an SL field. When building a QP1 packet, the VL field should
reflect the SLtoVL mapping and not arbitrarily contain zero (as is
done now). This bug causes credit problems in IB switches at
high rates of QP1 packets.

The fix is to cache the SL to VL mapping in the driver, and look up
the VL mapped to the SL provided in the send request when sending
QP1 packets.

For FW versions which support generating a port_management_config_change
event with subtype sl-to-vl-table-change, the driver uses that event
to update its sl-to-vl mapping cache.  Otherwise, the driver snoops
incoming SMP mads to update the cache.

There remains the case where the FW is running in secure-host mode
(so no QP0 packets are delivered to the driver), and the FW does not
generate the sl2vl mapping change event. To support this case, the
driver updates (via querying the FW) its sl2vl mapping cache when
running in secure-host mode when it receives either a Port Up event
or a client-reregister event (where the port is still up, but there
may have been an opensm failover).
OpenSM modifies the sl2vl mapping before Port Up and Client-reregister
events occur, so if there is a mapping change the driver's cache will
be properly updated.

Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch moves mthca vendor's specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmthca) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch moves nes vendor's specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmlx4) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch moves ocrdma vendor's specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmlx4) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.

In addition, it changes types to be __uXX instead of uXX.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Acked-By: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch moves mlx4 vendor's specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmlx4) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch moves cxgb4 vendor's specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libcxgb4) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch moves cxgb3 vendor's specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libcxgb3) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch decouples and moves vendors specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmlx5) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>