- 07 6月, 2017 3 次提交
-
-
由 Ard Biesheuvel 提交于
Currently, dynamic ftrace support in the arm64 kernel assumes that all core kernel code is within range of ordinary branch instructions that occur in module code, which is usually the case, but is no longer guaranteed now that we have support for module PLTs and address space randomization. Since on arm64, all patching of branch instructions involves function calls to the same entry point [ftrace_caller()], we can emit the modules with a trampoline that has unlimited range, and patch both the trampoline itself and the branch instruction to redirect the call via the trampoline. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> [will: minor clarification to smp_wmb() comment] Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Ard Biesheuvel 提交于
When turning branch instructions into NOPs, we attempt to validate the action by comparing the old value at the call site with the opcode of a direct relative branch instruction pointing at the old target. However, these call sites are statically initialized to call _mcount(), and may be redirected via a PLT entry if the module is loaded far away from the kernel text, leading to false negatives and spurious errors. So skip the validation if CONFIG_ARM64_MODULE_PLTS is configured. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Kees Cook 提交于
Adjust vdso_{start|end} to be char arrays to avoid compile-time analysis that flags "too large" memcmp() calls with CONFIG_FORTIFY_SOURCE. Cc: Jisheng Zhang <jszhang@marvell.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Suggested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 05 6月, 2017 1 次提交
-
-
由 Will Deacon 提交于
Commit 3fde2999 ("arm64: cpufeature: Don't dump useless backtrace on CPU_OUT_OF_SPEC") changed the cpufeature detection code to use add_taint instead of WARN_TAINT_ONCE when detecting a heterogeneous system with mismatched feature support. Unfortunately, this resulted in all systems getting the taint, regardless of any feature mismatch. This patch fixes the problem by conditionalising the taint on detecting a feature mismatch. Acked-by: NMark Rutland <mark.rutland@arm.com> Reported-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 02 6月, 2017 1 次提交
-
-
由 Ard Biesheuvel 提交于
When running lscpu on an AArch64 system that has SMBIOS version 2.0 tables, it will segfault in the following way: Unable to handle kernel paging request at virtual address ffff8000bfff0000 pgd = ffff8000f9615000 [ffff8000bfff0000] *pgd=0000000000000000 Internal error: Oops: 96000007 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1284 Comm: lscpu Not tainted 4.11.0-rc3+ #103 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 task: ffff8000fa78e800 task.stack: ffff8000f9780000 PC is at __arch_copy_to_user+0x90/0x220 LR is at read_mem+0xcc/0x140 This is caused by the fact that lspci issues a read() on /dev/mem at the offset where it expects to find the SMBIOS structure array. However, this region is classified as EFI_RUNTIME_SERVICE_DATA (as per the UEFI spec), and so it is omitted from the linear mapping. So let's restrict /dev/mem read/write access to those areas that are covered by the linear region. Reported-by: NAlexander Graf <agraf@suse.de> Fixes: 4dffbfc4 ("arm64/efi: mark UEFI reserved regions as MEMBLOCK_NOMAP") Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 30 5月, 2017 8 次提交
-
-
由 Lorenzo Pieralisi 提交于
PCI core requires the NUMA node for the struct pci_host_bridge.dev to be set by using the pcibus_to_node(struct pci_bus*) API, that on ARM64 systems relies on the struct pci_host_bridge->bus.dev NUMA node. The struct pci_host_bridge.dev NUMA node is then propagated through the PCI device hierarchy as PCI devices (and bridges) are enumerated under it. Therefore, in order to set-up the PCI NUMA hierarchy appropriately, the struct pci_host_bridge->bus.dev NUMA node must be set before core code calls pcibus_to_node(struct pci_bus*) on it so that PCI core can retrieve the NUMA node for the struct pci_host_bridge.dev device and can propagate it through the PCI bus tree. On ARM64 ACPI based systems the struct pci_host_bridge->bus.dev NUMA node can be set-up in pcibios_root_bridge_prepare() by parsing the root bridge ACPI device firmware binding. Add code to the pcibios_root_bridge_prepare() that, when booting with ACPI, parse the root bridge ACPI device companion NUMA binding and set the corresponding struct pci_host_bridge->bus.dev NUMA node appropriately. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: NRobert Richter <rrichter@cavium.com> Tested-by: NRobert Richter <rrichter@cavium.com> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Will Deacon 提交于
FUTEX_OP_OPARG_SHIFT instructs the futex code to treat the 12-bit oparg field as a shift value, potentially leading to a left shift value that is negative or with an absolute value that is significantly larger then the size of the type. UBSAN chokes with: ================================================================================ UBSAN: Undefined behaviour in ./arch/arm64/include/asm/futex.h:60:13 shift exponent -1 is negative CPU: 1 PID: 1449 Comm: syz-executor0 Not tainted 4.11.0-rc4-00005-g977eb52-dirty #11 Hardware name: linux,dummy-virt (DT) Call trace: [<ffff200008094778>] dump_backtrace+0x0/0x538 arch/arm64/kernel/traps.c:73 [<ffff200008094cd0>] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:228 [<ffff200008c194a8>] __dump_stack lib/dump_stack.c:16 [inline] [<ffff200008c194a8>] dump_stack+0x120/0x188 lib/dump_stack.c:52 [<ffff200008cc24b8>] ubsan_epilogue+0x18/0x98 lib/ubsan.c:164 [<ffff200008cc3098>] __ubsan_handle_shift_out_of_bounds+0x250/0x294 lib/ubsan.c:421 [<ffff20000832002c>] futex_atomic_op_inuser arch/arm64/include/asm/futex.h:60 [inline] [<ffff20000832002c>] futex_wake_op kernel/futex.c:1489 [inline] [<ffff20000832002c>] do_futex+0x137c/0x1740 kernel/futex.c:3231 [<ffff200008320504>] SYSC_futex kernel/futex.c:3281 [inline] [<ffff200008320504>] SyS_futex+0x114/0x268 kernel/futex.c:3249 [<ffff200008084770>] el0_svc_naked+0x24/0x28 ================================================================================ syz-executor1 uses obsolete (PF_INET,SOCK_PACKET) sock: process `syz-executor0' is using obsolete setsockopt SO_BSDCOMPAT This patch attempts to fix some of this by: * Making encoded_op an unsigned type, so we can shift it left even if the top bit is set. * Casting to signed prior to shifting right when extracting oparg and cmparg * Consider only the bottom 5 bits of oparg when using it as a left-shift value. Whilst I think this catches all of the issues, I'd much prefer to remove this stuff, as I think it's unused and the bugs are copy-pasted between a bunch of architectures. Reviewed-by: NRobin Murphy <robin.murphy@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Kefeng Wang 提交于
It's useless to print machine name and setup arch-specific system identifiers if of_flat_dt_get_machine_name() return NULL, especially when ACPI-based boot. Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Will Deacon 提交于
Unfortunately, it turns out that mismatched CPU features in big.LITTLE systems are starting to appear in the wild. Whilst we should continue to taint the kernel with CPU_OUT_OF_SPEC for features that differ in ways that we can't fix up, dumping a useless backtrace out of the cpufeature code is pointless and irritating. This patch removes the backtrace from the taint. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Tobias Klauser 提交于
arm64's mm/mmu.c uses vm_area_add_early, struct vm_area and other definitions but relies on implict inclusion of linux/vmalloc.h which means that changes in other headers could break the build. Thus, add an explicit include. Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Kefeng Wang 提交于
Generic code expects show_regs() to dump the stack, but arm64's show_regs() does not. This makes it hard to debug softlockups and other issues that result in show_regs() being called. This patch updates arm64's show_regs() to dump the stack, as common code expects. Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com> [will: folded in bug_handler fix from mrutland] Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Kefeng Wang 提交于
Generic code expects show_regs() to also dump the stack, but arm64's show_reg() does not do this. Some arm64 callers of show_regs() *only* want the registers dumped, without the stack. To enable generic code to work as expected, we need to make show_regs() dump the stack. Where we only want the registers dumped, we must use __show_regs(). This patch updates code to use __show_regs() where only registers are desired. A subsequent patch will modify show_regs(). Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Dong Bo 提交于
Like arch/arm/, we inherit the READ_IMPLIES_EXEC personality flag across fork(). This is undesirable for a number of reasons: * ELF files that don't require executable stack can end up with it anyway * We end up performing un-necessary I-cache maintenance when mapping what should be non-executable pages * Restricting what is executable is generally desirable when defending against overflow attacks This patch clears the personality flag when setting up the personality for newly spwaned native tasks. Given that semi-recent AArch64 toolchains emit a non-executable PT_GNU_STACK header, userspace applications can already not rely on READ_IMPLIES_EXEC so shouldn't be adversely affected by this change. Cc: <stable@vger.kernel.org> Reported-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NDong Bo <dongbo4@huawei.com> [will: added comment to compat code, rewrote commit message] Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 29 5月, 2017 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal由 Linus Torvalds 提交于
Pull thermal SoC management fixes from Eduardo Valentin: - fixes to TI SoC driver, Broadcom, qoriq - small sparse warning fix on thermal core * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: broadcom: ns-thermal: default on iProc SoCs ti-soc-thermal: Fix a typo in a comment line ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build() ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build() thermal: core: make thermal_emergency_poweroff static thermal: qoriq: remove useless call for of_thermal_get_trip_points()
-
- 28 5月, 2017 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger than normal, which is why I had them bake in linux-next for a few weeks and didn't send them to you for -rc2. They revert a few of the serdev patches from 4.12-rc1, and bring things back to how they were in 4.11, to try to make things a bit more stable there. Rob and Johan both agree that this is the way forward, so this isn't people squabbling over semantics. Other than that, just a few minor serial driver fixes that people have had problems with. All of these have been in linux-next for a few weeks with no reported issues" * tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: altera_uart: call iounmap() at driver remove serial: imx: ensure UCR3 and UFCR are setup correctly MAINTAINERS/serial: Change maintainer of jsm driver serial: enable serdev support tty/serdev: add serdev registration interface serdev: Restore serdev_device_write_buf for atomic context serial: core: fix crash in uart_suspend_port tty: fix port buffer locking tty: ehv_bytechan: clean up init error handling serial: ifx6x60: fix use-after-free on module unload serial: altera_jtaguart: adding iounmap() serial: exar: Fix stuck MSIs serial: efm32: Fix parity management in 'efm32_uart_console_get_options()' serdev: fix tty-port client deregistration Revert "tty_port: register tty ports with serdev bus" drivers/tty: 8250: only call fintek_8250_probe when doing port I/O
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "Fix running SPU programs on Cell, and a few other minor fixes. Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas Piggin" * tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions powerpc/spufs: Fix hash faults for kernel regions powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call selftests/powerpc: Fix TM resched DSCR test with some compilers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A series of fixes for X86: - The final fix for the end-of-stack issue in the unwinder - Handle non PAT systems gracefully - Prevent access to uninitiliazed memory - Move early delay calaibration after basic init - Fix Kconfig help text - Fix a cross compile issue - Unbreak older make versions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/timers: Move simple_udelay_calibration past init_hypervisor_platform x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives() x86/PAT: Fix Xorg regression on CPUs that don't support PAT x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation x86/build: Permit building with old make versions x86/unwind: Add end-of-stack check for ftrace handlers Revert "x86/entry: Fix the end of the stack for newly forked tasks" x86/boot: Use CROSS_COMPILE prefix for readelf
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixlet from Thomas Gleixner: "Silence dmesg spam by making the posix cpu timer printks depend on print_fatal_signals" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timers: Make signal printks conditional
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RAS fixes from Thomas Gleixner: "Two fixlets for RAS: - Export memory_error() so the NFIT module can utilize it - Handle memory errors in NFIT correctly" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: acpi, nfit: Fix the memory error check in nfit_handle_mce() x86/MCE: Export memory_error()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf tooling fixes from Thomas Gleixner: - Synchronization of tools and kernel headers - A series of fixes for perf report addressing various failures: * Handle invalid maps proper * Plug a memory leak * Handle frames and callchain order correctly - Fixes for handling inlines and children mode * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/include: Sync kernel ABI headers with tooling headers perf tools: Put caller above callee in --children mode perf report: Do not drop last inlined frame perf report: Always honor callchain order for inlined nodes perf script: Add --inline option for debugging perf report: Fix off-by-one for non-activation frames perf report: Fix memory leak in addr2line when called by addr2inlines perf report: Don't crash on invalid maps in `-g srcline` mode
-
- 27 5月, 2017 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fix from Thomas Gleixner: "A fix for a state leak which was introduced in the recent rework of futex/rtmutex interaction" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull kthread fix from Thomas Gleixner: "A single fix which prevents a use after free when kthread fork fails" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kthread: Fix use-after-free if kthread fork fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull ftrace fixes from Steven Rostedt: "There's been a few memory issues found with ftrace. One was simply a memory leak where not all was being freed that should have been in releasing a file pointer on set_graph_function. Then Thomas found that the ftrace trampolines were marked for read/write as well as execute. To shrink the possible attack surface, he added calls to set them to ro. Which also uncovered some other issues with freeing module allocated memory that had its permissions changed. Kprobes had a similar issue which is fixed and a selftest was added to trigger that issue again" * tag 'trace-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/ftrace: Make sure that ftrace trampolines are not RWX x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range() selftests/ftrace: Add a testcase for many kprobe events kprobes/x86: Fix to set RWX bits correctly before releasing trampoline ftrace: Fix memory leak in ftrace_graph_release()
-
由 Thomas Gleixner 提交于
ftrace use module_alloc() to allocate trampoline pages. The mapping of module_alloc() is RWX, which makes sense as the memory is written to right after allocation. But nothing makes these pages RO after writing to them. Add proper set_memory_rw/ro() calls to protect the trampolines after modification. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Steven Rostedt (VMware) 提交于
With function tracing starting in early bootup and having its trampoline pages being read only, a bug triggered with the following: kernel BUG at arch/x86/mm/pageattr.c:189! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.12.0-rc2-test+ #3 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 task: ffffffffb4222500 task.stack: ffffffffb4200000 RIP: 0010:change_page_attr_set_clr+0x269/0x302 RSP: 0000:ffffffffb4203c88 EFLAGS: 00010046 RAX: 0000000000000046 RBX: 0000000000000000 RCX: 00000001b6000000 RDX: ffffffffb4203d40 RSI: 0000000000000000 RDI: ffffffffb4240d60 RBP: ffffffffb4203d18 R08: 00000001b6000000 R09: 0000000000000001 R10: ffffffffb4203aa8 R11: 0000000000000003 R12: ffffffffc029b000 R13: ffffffffb4203d40 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9a639ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9a636b384000 CR3: 00000001ea21d000 CR4: 00000000000406b0 Call Trace: change_page_attr_clear+0x1f/0x21 set_memory_ro+0x1e/0x20 arch_ftrace_update_trampoline+0x207/0x21c ? ftrace_caller+0x64/0x64 ? 0xffffffffc029b000 ftrace_startup+0xf4/0x198 register_ftrace_function+0x26/0x3c function_trace_init+0x5e/0x73 tracer_init+0x1e/0x23 tracing_set_tracer+0x127/0x15a register_tracer+0x19b/0x1bc init_function_trace+0x90/0x92 early_trace_init+0x236/0x2b3 start_kernel+0x200/0x3f5 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x17c/0x18f secondary_startup_64+0x9f/0x9f ? secondary_startup_64+0x9f/0x9f Interrupts should not be enabled at this early in the boot process. It is also fine to leave interrupts enabled during this time as there's only one CPU running, and on_each_cpu() means to only run on the current CPU. If early_boot_irqs_disabled is set, it is safe to run cpu_flush_range() with interrupts disabled. Don't trigger a BUG_ON() in that case. Link: http://lkml.kernel.org/r/20170526093717.0be3b849@gandalf.local.homeSuggested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Masami Hiramatsu 提交于
Add a testcase to test kprobes via ftrace interface with many concurrent kprobe events. This tries to add many kprobe events (up to 256) on kernel functions. To avoid making ftrace-based kprobes (kprobes on fentry), it skips first N bytes (on x86 N=5, on ppc or arm N=4) of function entry. After that, it enables all those events, disable it, and remove it. Since the unoptimization buffer reclaiming will be delayed, after removing events, it will wait enough time. Link: http://lkml.kernel.org/r/149577388470.11702.11832460851769204511.stgit@devboxSigned-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Suggested-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Masami Hiramatsu 提交于
Fix kprobes to set(recover) RWX bits correctly on trampoline buffer before releasing it. Releasing readonly page to module_memfree() crash the kernel. Without this fix, if kprobes user register a bunch of kprobes in function body (since kprobes on function entry usually use ftrace) and unregister it, kernel hits a BUG and crash. Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devboxSigned-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Fixes: d0381c81 ("kprobes/x86: Set kprobes pages read-only") Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Luis Henriques 提交于
ftrace_hash is being kfree'ed in ftrace_graph_release(), however the ->buckets field is not. This results in a memory leak that is easily captured by kmemleak: unreferenced object 0xffff880038afe000 (size 8192): comm "trace-cmd", pid 238, jiffies 4294916898 (age 9.736s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815f561e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8113964d>] __kmalloc+0x12d/0x1a0 [<ffffffff810bf6d1>] alloc_ftrace_hash+0x51/0x80 [<ffffffff810c0523>] __ftrace_graph_open.isra.39.constprop.46+0xa3/0x100 [<ffffffff810c05e8>] ftrace_graph_open+0x68/0xa0 [<ffffffff8114003d>] do_dentry_open.isra.1+0x1bd/0x2d0 [<ffffffff81140df7>] vfs_open+0x47/0x60 [<ffffffff81150f95>] path_openat+0x2a5/0x1020 [<ffffffff81152d6a>] do_filp_open+0x8a/0xf0 [<ffffffff811411df>] do_sys_open+0x12f/0x200 [<ffffffff811412ce>] SyS_open+0x1e/0x20 [<ffffffff815fa6e0>] entry_SYSCALL_64_fastpath+0x13/0x94 [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/20170525152038.7661-1-lhenriques@suse.com Cc: stable@vger.kernel.org Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables") Signed-off-by: NLuis Henriques <lhenriques@suse.com> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input layer fixes from Dmitry Torokhov: "Just a few fixups to a couple of drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - ignore signals when finishing updating firmware Input: elan_i2c - clear INT before resetting controller Input: atmel_mxt_ts - add T100 as a readable object Input: edt-ft5x06 - increase allowed data range for threshold parameter
-
由 Linus Torvalds 提交于
Merge tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "A single LED fix for 4.12-rc3. leds-pca955x driver uses only i2c_smbus API and thus it should pass I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality" * tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: Correct I2C Functionality
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix state pruning in bpf verifier wrt. alignment, from Daniel Borkmann. 2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide Caratti. 3) Fix bit field definitions for rss_hash_type of descriptors in mlx5 driver, from Jesper Brouer. 4) Defer slave->link updates until bonding is ready to do a full commit to the new settings, from Nithin Sujir. 5) Properly reference count ipv4 FIB metrics to avoid use after free situations, from Eric Dumazet and several others including Cong Wang and Julian Anastasov. 6) Fix races in llc_ui_bind(), from Lin Zhang. 7) Fix regression of ESP UDP encapsulation for TCP packets, from Steffen Klassert. 8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap. 9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter Dawson. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add reference counting to metrics net: ethernet: ax88796: don't call free_irq without request_irq first ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets sctp: fix ICMP processing if skb is non-linear net: llc: add lock_sock in llc_ui_bind to avoid a race condition bonding: Don't update slave->link until ready to commit test_bpf: Add a couple of tests for BPF_JSGE. bpf: add various verifier test cases bpf: fix wrong exposure of map_flags into fdinfo for lpm bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data bpf: properly reset caller saved regs after helper call and ld_abs/ind bpf: fix incorrect pruning decision when alignment must be tracked arp: fixed -Wuninitialized compiler warning tcp: avoid fastopen API to be used on AF_UNSPEC net: move somaxconn init from sysctl code net: fix potential null pointer dereference geneve: fix fill_info when using collect_metadata virtio-net: enable TSO/checksum offloads for Q-in-Q vlans be2net: Fix offload features for Q-in-Q packets vlan: Fix tcp checksum offloads in Q-in-Q vlans ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull XFS fixes from Darrick Wong: "A few miscellaneous bug fixes & cleanups: - Fix indlen block reservation accounting bug when splitting delalloc extent - Fix warnings about unused variables that appeared in -rc1. - Don't spew errors when bmapping a local format directory - Fix an off-by-one error in a delalloc eof assertion - Make fsmap only return inode information for CAP_SYS_ADMIN - Fix a potential mount time deadlock recovering cow extents - Fix unaligned memory access in _btree_visit_blocks - Fix various SEEK_HOLE/SEEK_DATA bugs" * tag 'xfs-4.12-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Move handling of missing page into one place in xfs_find_get_desired_pgoff() xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff() xfs: Fix missed holes in SEEK_HOLE implementation xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff() xfs: fix unaligned access in xfs_btree_visit_blocks xfs: avoid mount-time deadlock in CoW extent recovery xfs: only return detailed fsmap info if the caller has CAP_SYS_ADMIN xfs: bad assertion for delalloc an extent that start at i_size xfs: fix warnings about unused stack variables xfs: BMAPX shouldn't barf on inline-format directories xfs: fix indlen accounting error on partial delalloc conversion
-
由 Eric Dumazet 提交于
Andrey Konovalov reported crashes in ipv4_mtu() I could reproduce the issue with KASAN kernels, between 10.246.7.151 and 10.246.7.152 : 1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 & 2) At the same time run following loop : while : do ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500 done Cong Wang attempted to add back rt->fi in commit 82486aa6 ("ipv4: restore rt->fi for reference counting") but this proved to add some issues that were complex to solve. Instead, I suggested to add a refcount to the metrics themselves, being a standalone object (in particular, no reference to other objects) I tried to make this patch as small as possible to ease its backport, instead of being super clean. Note that we believe that only ipv4 dst need to take care of the metric refcount. But if this is wrong, this patch adds the basic infrastructure to extend this to other families. Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang for his efforts on this problem. Fixes: 2860583f ("ipv4: Kill rt->fi") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAndrey Konovalov <andreyknvl@google.com> Reviewed-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Uwe Kleine-König 提交于
The function ax_init_dev (which is called only from the driver's .probe function) calls free_irq in the error path without having requested the irq in the first place. So drop the free_irq call in the error path. Fixes: 825a2ff1 ("AX88796 network driver") Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Dawson 提交于
This fix addresses two problems in the way the DSCP field is formulated on the encapsulating header of IPv6 tunnels. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195661 1) The IPv6 tunneling code was manipulating the DSCP field of the encapsulating packet using the 32b flowlabel. Since the flowlabel is only the lower 20b it was incorrect to assume that the upper 12b containing the DSCP and ECN fields would remain intact when formulating the encapsulating header. This fix handles the 'inherit' and 'fixed-value' DSCP cases explicitly using the extant dsfield u8 variable. 2) The use of INET_ECN_encapsulate(0, dsfield) in ip6_tnl_xmit was incorrect and resulted in the DSCP value always being set to 0. Commit 90427ef5 ("ipv6: fix flow labels when the traffic class is non-0") caused the regression by masking out the flowlabel which exposed the incorrect handling of the DSCP portion of the flowlabel in ip6_tunnel and ip6_gre. Fixes: 90427ef5 ("ipv6: fix flow labels when the traffic class is non-0") Signed-off-by: NPeter Dawson <peter.a.dawson@boeing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
sometimes ICMP replies to INIT chunks are ignored by the client, even if the encapsulated SCTP headers match an open socket. This happens when the ICMP packet is carried by a paged skb: use skb_header_pointer() to read packet contents beyond the SCTP header, so that chunk header and initiate tag are validated correctly. v2: - don't use skb_header_pointer() to read the transport header, since icmp_socket_deliver() already puts these 8 bytes in the linear area. - change commit message to make specific reference to INIT chunks. Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Reviewed-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 linzhang 提交于
There is a race condition in llc_ui_bind if two or more processes/threads try to bind a same socket. If more processes/threads bind a same socket success that will lead to two problems, one is this action is not what we expected, another is will lead to kernel in unstable status or oops(in my simple test case, cause llc2.ko can't unload). The current code is test SOCK_ZAPPED bit to avoid a process to bind a same socket twice but that is can't avoid more processes/threads try to bind a same socket at the same time. So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect. Signed-off-by: NLin Zhang <xiaolou4617@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A collection of fixes that should go into this series. This contains: - A set of NVMe fixes, pulled from Christoph. This includes a set of fixes for the fiber channel bits from James Smart, rdma queue depth fix from Marta, controller removal fixes from Ming, and some more APST quirk updates from Andy. - A blk-mq debugfs fix from Bart, fixing a problem with the untangling of the sysfs and debugfs blk-mq bits that was added in this series. - Error code fix in add_partition() from Dan. - A small series of fixes for the new blk-throttle code from Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: (21 commits) blk-mq: Only register debugfs attributes for blk-mq queues nvme: Quirk APST on Intel 600P/P3100 devices nvme: only setup block integrity if supported by the driver nvme: replace is_flags field in nvme_ctrl_ops with a flags field nvme-pci: consistencly use ctrl->device for logging partitions/msdos: FreeBSD UFS2 file systems are not recognized block: fix an error code in add_partition() blk-throttle: force user to configure all settings for io.low blk-throttle: respect 0 bps/iops settings for io.low blk-throttle: output some debug info in trace blk-throttle: add hierarchy support for latency target and idle time nvme_fc: remove extra controller reference taken on reconnect nvme_fc: correct nvme status set on abort nvme_fc: set logging level on resets/deletes nvme_fc: revise comment on teardown nvme_fc: Support ctrl_loss_tmo nvme_fc: get rid of local reconnect_delay blk-mq: remove blk_mq_abort_requeue_list() nvme: avoid to use blk_mq_abort_requeue_list() nvme: use blk_mq_start_hw_queues() in nvme_kill_queues() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - fix PCI_ENDPOINT build error (merged for v4.12) - fix Switchtec driver (merged for v4.12) - fix imx6 config read timeouts, fallout from changing to non-postable reads - add PM "needs_resume" flag for i915 suspend issue * tag 'pci-v4.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Add needs_resume flag to avoid suspend complete optimization PCI: imx6: Fix config read timeout handling switchtec: Fix minor bug with partition ID register switchtec: Use new cdev_device_add() helper function PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMA
-