This patch refactors mac mtu setting related functions,
normalizes the use of mps and mtu.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds supports for two vlan header when setting mtu.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove directly accessing device_node.type pointer and use the accessors
instead. This will eventually allow removing the type pointer.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Chas Williams <3chas3@gmail.com>
Cc: linux-atm-general@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This structure is small (12 or 16 bytes depending on 64bit
or 32bit kernels), but we do not want it spanning two cache lines.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not risk spanning these small structures on two cache lines,
it is absolutely not worth it.

For 32bit arches, the hint might not be enough, but we do not
really care anymore.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a spelling mistake in a netdev_err message. Fix this.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'err' always be 0 in the two places.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Samuel Mendoza-Jonas says:

====================
net/ncsi: Allow enabling multiple packages & channels

This series extends the NCSI driver to configure multiple packages
and/or channels simultaneously. Since the RFC series this includes a few
extra changes to fix areas in the driver that either made this harder or
were roadblocks due to deviations from the NCSI specification.

Patches 1 & 2 fix two issues where the driver made assumptions about the
capabilities of the NCSI topology.
Patches 3 & 4 change some internal semantics slightly to make multi-mode
easier.
Patch 5 introduces a cleaner way of reconfiguring the NCSI configuration
and keeping track of channel states.
Patch 6 implements the main multi-package/multi-channel configuration,
configured via the Netlink interface.

Readers who have an interesting NCSI setup - especially multi-package
with HWA - please test! I think I've covered all permutations but I
don't have infinite hardware to test on.

Changes in v2:
- Updated use of the channel lock in ncsi_reset_dev(), making the
channel invisible and leaving the monitor check to
ncsi_stop_channel_monitor().
- Fixed ncsi_channel_is_tx() to consider the state of channels in other
packages.
Changes in v3:
- Fixed bisectability bug in patch 1
- Consider channels on all packages in a few places when multi-package
is enabled.
- Avoid doubling up reset operations, and check the current driver state
before reset to let any running operations complete.
- Reorganise the LSC handler slightly to avoid enabling Tx twice.
Changes in v4:
- Fix failover in the single-channel case
- Better handle ncsi_reset_dev() entry during a current config/suspend
operation.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch extends the ncsi-netlink interface with two new commands and
three new attributes to configure multiple packages and/or channels at
once, and configure specific failover modes.

NCSI_CMD_SET_PACKAGE mask and NCSI_CMD_SET_CHANNEL_MASK set a whitelist
of packages or channels allowed to be configured with the
NCSI_ATTR_PACKAGE_MASK and NCSI_ATTR_CHANNEL_MASK attributes
respectively. If one of these whitelists is set only packages or
channels matching the whitelist are considered for the channel queue in
ncsi_choose_active_channel().

These commands may also use the NCSI_ATTR_MULTI_FLAG to signal that
multiple packages or channels may be configured simultaneously. NCSI
hardware arbitration (HWA) must be available in order to enable
multi-package mode. Multi-channel mode is always available.

If the NCSI_ATTR_CHANNEL_ID attribute is present in the
NCSI_CMD_SET_CHANNEL_MASK command the it sets the preferred channel as
with the NCSI_CMD_SET_INTERFACE command. The combination of preferred
channel and channel whitelist defines a primary channel and the allowed
failover channels.
If the NCSI_ATTR_MULTI_FLAG attribute is also present then the preferred
channel is configured for Tx/Rx and the other channels are enabled only
for Rx.
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the NCSI driver is stopped with ncsi_stop_dev() the channel
monitors are stopped and the state set to "inactive". However the
channels are still configured and active from the perspective of the
network controller. We should suspend each active channel but in the
context of ncsi_stop_dev() the transmit queue has been or is about to be
stopped so we won't have time to do so.

Instead when ncsi_start_dev() is called if the NCSI topology has already
been probed then call ncsi_reset_dev() to suspend any channels that were
previously active. This resets the network controller to a known state,
provides an up to date view of channel link state, and makes sure that
mode flags such as NCSI_MODE_TX_ENABLE are properly reset.

In addition to ncsi_start_dev() use ncsi_reset_dev() in ncsi-netlink.c
to update the channel configuration more cleanly.
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The concepts of a channel being 'active' and it having link are slightly
muddled in the NCSI driver. Tweak this slightly so that
NCSI_CHANNEL_ACTIVE represents a channel that has been configured and
enabled, and NCSI_CHANNEL_INACTIVE represents a de-configured channel.
This distinction is important because a channel can be 'active' but have
its link down; in this case the channel may still need to be configured
so that it may receive AEN link-state-change packets.
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a package is deselected all channels of that package cease
communication. If there are other channels active on the package of the
suspended channel this will disable them as well, so only send a
deselect-package command if no other channels are active.
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the NCSI driver sends a select-package command to all possible
packages simultaneously to discover what packages are available. However
at this stage in the probe process the driver does not know if
hardware arbitration is available: if it isn't then this process could
cause collisions on the RMII bus when packages try to respond.

Update the probe loop to probe each package one by one, and once
complete check if HWA is universally supported.
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NCSI hardware arbitration allows multiple packages to be enabled at once
and share the same wiring. If the NCSI driver recognises that HWA is
available it unconditionally enables all packages and channels; but that
is a configuration decision rather than something required by HWA.
Additionally the current implementation will not failover on link events
which can cause connectivity to be lost unless the interface is manually
bounced.

Retain basic HWA support but remove the separate configuration path to
enable all channels, leaving this to be handled by a later
implementation.
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SGE Host Page Size has nothing to do with the actual
Host Page Size. It's the SGE's BAR2 Doorbell/GTS Page Size
for interpreting the SGE Ingress/Egress Queue per Page values.
Firmware reads all of these things and makes all the
subsequent changes necessary. The Host Driver uses the SGE
Host Page Size in order to properly calculate BAR2 Offsets.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NArjun Vynipadath <arjun@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add TCP_NLA_SRTT to SCM_TIMESTAMPING_OPT_STATS that reports the smoothed
round trip time in microseconds (tcp_sock.srtt_us >> 3).
Signed-off-by: NYousuk Seung <ysseung@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial spelling errors found by codespell.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of constantly playing with the struct initializer
syntax trying to make gcc and CLang both happy, just clear
it out using memset().

>> drivers/net/tun.c:2503:42: warning: Using plain integer as NULL pointer
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thanks to the batched XDP buffs through msg_control. Instead of
calling put_page() for each page which involves a atomic operation,
let's batch them by record the last page that needs to be freed and
its refcnt count and free them in a batch.

Testpmd(virtio-user + vhost_net) + XDP_DROP shows 3.8% improvement.

Before: 4.71Mpps
After : 4.89Mpps
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We do a get_page() which involves a atomic operation. This patch tries
to mitigate a per packet atomic operation by maintaining a reference
bias which is initially USHRT_MAX. Each time a page is got, instead of
calling get_page() we decrease the bias and when we find it's time to
use a new page we will decrease the bias at one time through
__page_cache_drain_cache().

Testpmd(virtio_user + vhost_net) + XDP_DROP on TAP shows about 1.6%
improvement.

Before: 4.63Mpps
After:  4.71Mpps
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: sched: gred: introduce per-virtual queue attributes

This series updates the GRED Qdisc.  The Qdisc matches nfp offload very
well, but before we can offload it there are a number of improvements
to make.

First few patches add extack messages to the Qdisc and pass extack
to netlink validation.

Next a new netlink attribute group is added, to allow GRED to be
extended more easily.  Currently GRED passes C structures as attributes,
and even an array of C structs for virtual queue configuration.  User
space has hard coded the expected length of that array, so adding new
fields is not possible.

New two-level attribute group is added:

  [TCA_GRED_VQ_LIST]
    [TCA_GRED_VQ_ENTRY]
      [TCA_GRED_VQ_DP]
      [TCA_GRED_VQ_FLAGS]
      [TCA_GRED_VQ_STAT_*]
    [TCA_GRED_VQ_ENTRY]
      [TCA_GRED_VQ_DP]
      [TCA_GRED_VQ_FLAGS]
      [TCA_GRED_VQ_STAT_*]
    [TCA_GRED_VQ_ENTRY]
       ...

Statistics are dump only. Patch 4 switches the byte counts to be 64 bit,
and patch 5 introduces the new stats attributes for dump.  Patch 6
switches RED flags to be per-virtual queue, and patch 7 allows them
to be dumped and set at virtual queue granularity.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow users to set and dump RED flags (ECN enabled and harddrop)
on per-virtual queue basis.  Validation of attributes is split
from changes to make sure we won't have to undo previous operations
when we find out configuration is invalid.

The objective is to allow changing per-Qdisc parameters without
overwriting the per-vq configured flags.

Old user space will not pass the TCA_GRED_VQ_FLAGS attribute and
per-Qdisc flags will always get propagated to the virtual queues.

New user space which wants to make use of per-vq flags should set
per-Qdisc flags to 0 and then configure per-vq flags as it
sees fit.  Once per-vq flags are set per-Qdisc flags can't be
changed to non-zero.  Vice versa - if the per-Qdisc flags are
non-zero the TCA_GRED_VQ_FLAGS attribute has to either be omitted
or set to the same value as per-Qdisc flags.

Update per-Qdisc parameters:
per-Qdisc | per-VQ | result
        0 |      0 | all vq flags updated
	0 |  non-0 | error (vq flags in use)
    non-0 |      0 | -- impossible --
    non-0 |  non-0 | all vq flags updated

Update per-VQ state (flags parameter not specified):
   no change to flags

Update per-VQ state (flags parameter set):
per-Qdisc | per-VQ | result
        0 |   any  | per-vq flags updated
    non-0 |      0 | -- impossible --
    non-0 |  non-0 | error (per-Qdisc flags in use)
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Right now ECN marking and HARD drop (the common RED flags) can only
be configured for the entire Qdisc.  In preparation for per-vq flags
store the values in the virtual queue structure.  Setting per-vq
flags will only be allowed when no flags are set for the entire Qdisc.
For the new flags we will also make sure undefined bits are 0.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently all GRED's virtual queue data is dumped in a single
array in a single attribute.  This makes it pretty much impossible
to add new fields.  In order to expose more detailed stats add a
new set of attributes.  We can now expose the 64 bit value of bytesin
and all the mark stats which were not part of the original design.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

32 bit counters for bytes are not really going to last long in modern
world.  Make sch_gred count bytes on a 64 bit counter.  It will still
get truncated during dump but follow up patch will add set of new
stat dump attributes.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add extack messages to -EINVAL errors, to help users identify
their mistakes.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case netlink wants to provide parsing error pass extack
to nla_parse_nested().
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We will soon want to add more code to the non-error path, separate
it from the error handling flow.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This covers for proper accounting of encap needed static keys
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/isdn/hisax/hfc_pci.c:277:6: warning:
 variable ‘total’ set but not used [-Wunused-but-set-variable]

It never used since git history start.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 60fb9567 ("udp: implement complete book-keeping for
encap_needed") introduced a severe misuse of jump label APIs, which
syzbot, as reported by Eric, was able to exploit.

When multiple sockets/process can concurrently request (and than
disable) the udp encap, we need to track the activation counter with
*_inc()/*_dec() jump label variants, or we can experience bad things
at disable time.

Fixes: 60fb9567 ("udp: implement complete book-keeping for encap_needed")
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently on dequeue() ETF only drops the first expired packet, which
causes a problem if the next packet is already expired. When this
happens, the watchdog will be configured with a time in the past, fire
straight way and the packet will finally be dropped once the dequeue()
function of the qdisc is called again.

We can save quite a few cycles and improve the overall behavior of the
qdisc if we drop all expired packets if the next packet is expired.
This should allow ETF to recover faster from bad situations. But
packet drops are still a very serious warning that the requirements
imposed on the system aren't reasonable.

This was inspired by how the implementation of hrtimers use the
rb_tree inside the kernel.
Signed-off-by: NJesus Sanchez-Palencia <jesus.s.palencia@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is just a refactor that will simplify the implementation of the
next patch in this series which will drop all expired packets on the
dequeue flow.
Signed-off-by: NJesus Sanchez-Palencia <jesus.s.palencia@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ETF's peek() operation is heavily used so use an rb_root_cached instead
and leverage rb_first_cached() which will run in O(1) instead of
O(log n).

Even if on 'timesortedlist_clear()' we could be using rb_erase(), we
choose to use rb_erase_cached(), because if in the future we allow
runtime changes to ETF parameters, and need to do a '_clear()', this
might cause some hard to debug issues.
Signed-off-by: NJesus Sanchez-Palencia <jesus.s.palencia@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no point in firing the qdisc watchdog if there are no future
skbs pending in the queue and the watchdog had been set previously.
Signed-off-by: NJesus Sanchez-Palencia <jesus.s.palencia@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we can use bpf or tcp tracepoint to conveniently trace the tcp
state transition at the run time.
So we don't need to do this stuff at the compile time anymore.
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Dooks says:

====================
SMSC95xx driver updates (round 1)

This is a series of a few driver cleanups and some fixups of the code
for the SMSC95XX driver. There have been a few reviews, and the issues
have been fixed so this should be ready for merging.

I will work on the tx-alignment and the other bits of usbnet changes
and produce at least two more patch series for this later.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The manual states that the checksum cannot lie in the last DWORD of the
transmission, so add a basic check for this and fall back to software
checksumming the packet.

This only seems to trigger for ACK packets with no options or data to
return to the other end, and the use of the tx-alignment option makes
it more likely to happen.
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the RX code to use get_unaligned_le32() instead of the combo
of memcpy and cpu_to_le32s(&var).
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>