Pull powerpc fixes from Michael Ellerman:
 - Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
 - Fix dedotify for binutils >= 2.26 from Andreas Schwab
 - Don't trace hcalls on offline CPUs from Denis Kirjanov
 - eeh: Fix stale cached primary bus from Gavin Shan
 - eeh: Fix stale PE primary bus from Gavin Shan
 - mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
 - ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy

* tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/ioda: Set "read" permission when "write" is set
  powerpc/mm: Fix Multi hit ERAT cause by recent THP update
  powerpc/powernv: Fix stale PE primary bus
  powerpc/eeh: Fix stale cached primary bus
  powerpc/pseries: Don't trace hcalls on offline CPUs
  powerpc: Fix dedotify for binutils >= 2.26
  powerpc/book3s_32: Fix build error with checkpoint restart

Pull dmaengine fixes from Vinod Koul:
 "A few fixes for drivers, nothing major here.

  Fixes are: iotdma fix to restart channels, new ID for wildcat PCH,
  residue fix for edma, disable irq for non-cyclic in dw"

* tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
  dmaengine: edma: fix residue race for cyclic
  dmaengine: dw: pci: add ID for WildcatPoint PCH
  dmaengine: IOATDMA: fix timer code that continues to restart channels during idle

Pull clk driver fixes from Stephen Boyd:
 "An assortment of vendor specific clk drivers fixes, most notably
  fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers this
  cycle.

  There's also the random smattering of sparse/checker fixes, a build
  "fix" to get the Tango clk driver to compile because the Kconfig
  symbol was renamed after the fact, and a clk gpio fix for a patch
  mismerge"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (28 commits)
  clk: gpio: Really allow an optional clock= DT property
  Revert "clk: qcom: Specify LE device endianness"
  clk: versatile: mask VCO bits before writing
  clk: tegra: super: Fix sparse warnings for functions not declared as static
  clk: tegra: Fix sparse warnings for functions not declared as static
  clk: tegra: Fix sparse warning for pll_m
  clk: tegra: Use definition for pll_u override bit
  clk: tegra: Fix warning caused by pll_u failing to lock
  clk: tegra: Fix clock sources for Tegra210 EMC
  clk: tegra: Add the APB2APE audio clock on Tegra210
  clk: tegra: Add missing of_node_put()
  clk: tegra: Fix PLLE SS coefficients
  clk: tegra: Fix typos around clearing PLLE bits during enable
  clk: tegra: Do not disable PLLE when under hardware control
  clk: tegra: Fix pllx dyn step calculation
  clk: tegra: pll: Fix potential sleeping-while-atomic
  clk: tegra: Fix the misnaming of nvenc from msenc
  clk: tegra: Fix naming of MISC registers
  clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
  clk: scpi: Fix checking return value of platform_device_register_simple()
  ...

Pull more drm fixes from Dave Airlie:
 "Some more fixes trickled in:

  A bunch of VC4 ones since it's a pretty new driver not much chance of
  regressions, and it fixes GPU resets.

  Also one atomic fix, one set of fixes for a common bug in TTM cleanup,
  and one i915 hotplug fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: use post-decrement in error handling
  drm/atomic: Allow for holes in connector state, v2.
  drm/i915: Fix hpd live status bits for g4x
  drm/vc4: Use runtime PM to power cycle the device when the GPU hangs.
  drm/vc4: Enable runtime PM.
  drm/vc4: Fix spurious GPU resets due to BO reuse.
  drm/vc4: Drop error message on seqno wait timeouts.
  drm/vc4: Fix -ERESTARTSYS error return from BO waits.
  drm/vc4: Return an ERR_PTR from BO creation instead of NULL.
  drm/vc4: Fix the clear color for the first tile rendered.
  drm/vc4: Validate that WAIT_BO padding is cleared.
  drm/radeon: use post-decrement in error handling
  drm/amdgpu: use post-decrement in error handling

In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released.  A pointer on the conflicting resource is kept.  At wake-up
this pointer is used as a parent to retry to request the region.

A first problem is that this pointer might well be invalid (if for
example the conflicting resource have already been freed).  Another
problem is that the next call to __request_region() fails to detect a
remaining conflict.  The previously conflicting resource is passed as a
parameter and __request_region() will look for a conflict among the
children of this resource and not at the resource itself.  It is likely
to succeed anyway, even if there is still a conflict.

Instead, the parent of the conflicting resource should be passed to
__request_region().

As a fix, this patch doesn't update the parent resource pointer in the
case we have to wait for a muxed region right after.
Reported-and-tested-by: NVincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
Tested-by: NVincent Donnefort <vdonnefort@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ext4 bugfixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for v4.5"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix crashes in dioread_nolock mode
  ext4: fix bh->b_state corruption
  ext4: fix memleak in ext4_readdir()
  ext4: remove unused parameter "newblock" in convert_initialized_extent()
  ext4: don't read blocks from disk after extents being swapped
  ext4: fix potential integer overflow
  ext4: add a line break for proc mb_groups display
  ext4: ioctl: fix erroneous return value
  ext4: fix scheduling in atomic on group checksum failure
  ext4 crypto: move context consistency check to ext4_file_open()
  ext4 crypto: revalidate dentry after adding or removing the key

Pull btrfs fix from Chris Mason:
 "My for-linus-4.5 branch has a btrfs DIO error passing fix.

  I know how much you love DIO, so I'm going to suggest against reading
  it.  We'll follow up with a patch to drop the error arg from
  dio_end_io in the next merge window."

* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix direct IO requests not reporting IO error to user space

Merge fixes from Andrew Morton:
 "10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: slab: free kmem_cache_node after destroy sysfs file
  ipc/shm: handle removed segments gracefully in shm_mmap()
  MAINTAINERS: update Kselftest Framework mailing list
  devm_memremap_release(): fix memremap'd addr handling
  mm/hugetlb.c: fix incorrect proc nr_hugepages value
  mm, x86: fix pte_page() crash in gup_pte_range()
  fsnotify: turn fsnotify reaper thread into a workqueue job
  Revert "fsnotify: destroy marks with call_srcu instead of dedicated thread"
  mm: fix regression in remap_file_pages() emulation
  thp, dax: do not try to withdraw pgtable from non-anon VMA

Pull arm64 fixes from Will Deacon:
 "Here are some more arm64 fixes for 4.5.  This has mostly come from
  Yang Shi, who saw some issues under -rt that also affect mainline.
  The rest of it is pretty small, but still worth having.

  We've got an old issue outstanding with valid_user_regs which will
  likely wait until 4.6 (since it would really benefit from some time in
  -next) and another issue with kasan and idle which should be fixed
  next week.

  Apart from that, pretty quiet here (and still no sign of the THP issue
  reported on s390...)

  Summary:

   - Allow EFI stub to use strnlen(), which is required by recent libfdt

   - Avoid smp_processor_id() in preempt context during unwinding

   - Avoid false Kasan warnings during unwinding

   - Ensure early devices are picked up by the IOMMU DMA ops

   - Avoid rebuilding the kernel for the 'install' target

   - Run fixup handlers for alignment faults on userspace access"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: allow the kernel to handle alignment faults on user accesses
  arm64: kbuild: make "make install" not depend on vmlinux
  arm64: dma-mapping: fix handling of devices registered before arch_initcall
  arm64/efi: Make strnlen() available to the EFI namespace
  arm/arm64: crypto: assure that ECB modes don't require an IV
  arm64: make irq_stack_ptr more robust
  arm64: debug: re-enable irqs before sending breakpoint SIGTRAP
  arm64: disable kasan when accessing frame->fp in unwind_frame

Pull s390 fixes from Martin Schwidefsky:
 "Several bug fixes:

   - There are four different stack tracers, and three of them have
     bugs.  For 4.5 the bugs are fixed and we prepare a cleanup patch
     for the next merge window.

   - Three bug fixes for the dasd driver in regard to parallel access
     volumes and the new max_dev_sectors block device queue limit

   - The irq restore optimization needs a fixup for memcpy_real

   - The diagnose trace code has a conflict with lockdep"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: fix performance drop
  s390/maccess: reduce stnsm instructions
  s390/diag: avoid lockdep recursion
  s390/dasd: fix refcount for PAV reassignment
  s390/dasd: prevent incorrect length error under z/VM after PAV changes
  s390: fix DAT off memory access, e.g. on kdump
  s390/oprofile: fix address range for asynchronous stack
  s390/perf_event: fix address range for asynchronous stack
  s390/stacktrace: add save_stack_trace_regs()
  s390/stacktrace: save full stack traces
  s390/stacktrace: add missing end marker
  s390/stacktrace: fix address ranges for asynchronous and panic stack
  s390/stacktrace: fix save_stack_trace_tsk() for current task

Pull Pin control fixes from Linus Walleij:
 "Pin control fixes for the v4.5 series, all are individual driver
  fixes:

   - Fix the PXA2xx driver to export its init function so we do not
     break modular compiles.
   - Hide unused functions in the Nomadik driver.
   - Fix up direction control in the Mediatek driver.
   - Toggle the sunxi GPIO lines to input when you read them on the H3
     GPIO controller, lest you only get garbage.
   - Fix up the number of settings in the MVEBU driver.
   - Fix a serious SMP race condition in the Samsung driver"

* tag 'pinctrl-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: samsung: fix SMP race condition
  pinctrl: mvebu: fix num_settings in mpp group assignment
  pinctrl: sunxi: H3 requires irq_read_needs_mux
  pinctrl: mediatek: fix direction control issue
  pinctrl: nomadik: hide unused functions
  pinctrl: pxa: export pxa2xx_pinctrl_init()

Pull sound fixes from Takashi Iwai:
 "This update contains again a few more fixes for ALSA core stuff
  although it's no longer high flux: two race fixes in sequencer and one
  PCM race fix for non-atomic PCM ops.

  In addition, HD-audio gained a similar fix for race at reloading the
  driver"

* tag 'sound-4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream
  ALSA: seq: Fix double port list deletion
  ALSA: hda - Cancel probe work instead of flush at remove
  ALSA: seq: Fix leak of pool buffer at concurrent writes

Although we don't expect to take alignment faults on access to normal
memory, misbehaving (i.e. buggy) user code can pass MMIO pointers into
system calls, leading to things like get_user accessing device memory.

Rather than OOPS the kernel, allow any exception fixups to run and
return something like -EFAULT back to userspace. This makes the
behaviour more consistent with userspace, even though applications with
access to device mappings can easily cause other issues if they try
hard enough.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NEun Taik Lee <eun.taik.lee@samsung.com>
[will: dropped __kprobes annotation and rewrote commit mesage]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

For the same reason as commit 19514fc6 ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Competing overwrite DIO in dioread_nolock mode will just overwrite
pointer to io_end in the inode. This may result in data corruption or
extent conversion happening from IO completion interrupt because we
don't properly set buffer_defer_completion() when unlocked DIO races
with locked DIO to unwritten extent.

Since unlocked DIO doesn't need io_end for anything, just avoid
allocating it and corrupting pointer from inode for locked DIO.
A cleaner fix would be to avoid these games with io_end pointer from the
inode but that requires more intrusive changes so we leave that for
later.

Cc: stable@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

ext4 can update bh->b_state non-atomically in _ext4_get_block() and
ext4_da_get_block_prep(). Usually this is fine since bh is just a
temporary storage for mapping information on stack but in some cases it
can be fully living bh attached to a page. In such case non-atomic
update of bh->b_state can race with an atomic update which then gets
lost. Usually when we are mapping bh and thus updating bh->b_state
non-atomically, nobody else touches the bh and so things work out fine
but there is one case to especially worry about: ext4_finish_bio() uses
BH_Uptodate_Lock on the first bh in the page to synchronize handling of
PageWriteback state. So when blocksize < pagesize, we can be atomically
modifying bh->b_state of a buffer that actually isn't under IO and thus
can race e.g. with delalloc trying to map that buffer. The result is
that we can mistakenly set / clear BH_Uptodate_Lock bit resulting in the
corruption of PageWriteback state or missed unlock of BH_Uptodate_Lock.

Fix the problem by always updating bh->b_state bits atomically.

CC: stable@vger.kernel.org
Reported-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

We need to use post-decrement to get the dma_map_page undone also for
i==0, and to avoid some very unpleasant behaviour if dma_map_page
failed already at i==0.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Because we record connector_mask using 1 << drm_connector_index now
the connector_mask should stay the same even when other connectors
are removed. This was not the case with MST, in that case when removing
a connector all other connectors may change their index.

This is fixed by waiting until the first get_connector_state to allocate
connector_state, and force reallocation when state is too small.

As a side effect connector arrays no longer have to be preallocated,
and can be allocated on first use which means a less allocations in
the page flip only path.

Changes since v1:
- Whitespace. (Ville)
- Call ida_remove when destroying the connector. (Ville)
- u32 alloc -> int. (Ville)

Fixes: 14de6c44 ("drm/atomic: Remove drm_atomic_connectors_for_crtc.")
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We mis-merged the original patch from Russell here and so the
patch went almost all the way, except that we still failed to
probe when there wasn't a clocks property in the DT node. Allow
that case by making a negative value from
of_clk_get_parent_count() into "no parents", like the original
patch did.

Fixes: 7ed88aa2 ("clk: fix clk-gpio.c with optional clock= DT property")
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

This pull request fixes GPU reset (which was disabled shortly after
V3D integration due to build breakage) and waits for idle in the
presence of signals (which X likes to do a lot).

* tag 'drm-vc4-fixes-2016-02-17' of github.com:anholt/linux:
  drm/vc4: Use runtime PM to power cycle the device when the GPU hangs.
  drm/vc4: Enable runtime PM.
  drm/vc4: Fix spurious GPU resets due to BO reuse.
  drm/vc4: Drop error message on seqno wait timeouts.
  drm/vc4: Fix -ERESTARTSYS error return from BO waits.
  drm/vc4: Return an ERR_PTR from BO creation instead of NULL.
  drm/vc4: Fix the clear color for the first tile rendered.
  drm/vc4: Validate that WAIT_BO padding is cleared.

Just two small fixes in the ttm_tt_populate error handling; one for radeon,
one for amdgpu.

* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: use post-decrement in error handling
  drm/amdgpu: use post-decrement in error handling

single g4x hpd fix.

* tag 'drm-intel-fixes-2016-02-18' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix hpd live status bits for g4x

Pull livepatching fixes from Jiri Kosina:

 - regression (from 4.4) fix for ordering issue, introduced by an
   earlier ftrace change, that broke live patching of modules.

   The fix replaces the ftrace module notifier by direct call in order
   to make the ordering guaranteed and well-defined.  The patch, from
   Jessica Yu, has been acked both by Steven and Rusty

 - error message fix from Miroslav Benes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  ftrace/module: remove ftrace module notifier
  livepatch: change the error message in asm/livepatch.h header files

Pull SCSI fixes from James Bottomley:
 "Two simple fixes.

  One prevents a soft lockup on some target removal scenarios and the
  other prevents us trying to probe the marvell console device, which
  causes it to time out and need the bus resetting"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fix soft lockup in scsi_remove_target() on module removal
  SCSI: Add Marvell configuration device to VPD blacklist

When slub_debug alloc_calls_show is enabled we will try to track
location and user of slab object on each online node, kmem_cache_node
structure and cpu_cache/cpu_slub shouldn't be freed till there is the
last reference to sysfs file.

This fixes the following panic:

   BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
   IP:  list_locations+0x169/0x4e0
   PGD 257304067 PUD 438456067 PMD 0
   Oops: 0000 [#1] SMP
   CPU: 3 PID: 973074 Comm: cat ve: 0 Not tainted 3.10.0-229.7.2.ovz.9.30-00007-japdoll-dirty #2 9.30
   Hardware name: DEPO Computers To Be Filled By O.E.M./H67DE3, BIOS L1.60c 07/14/2011
   task: ffff88042a5dc5b0 ti: ffff88037f8d8000 task.ti: ffff88037f8d8000
   RIP: list_locations+0x169/0x4e0
   Call Trace:
     alloc_calls_show+0x1d/0x30
     slab_attr_show+0x1b/0x30
     sysfs_read_file+0x9a/0x1a0
     vfs_read+0x9c/0x170
     SyS_read+0x58/0xb0
     system_call_fastpath+0x16/0x1b
   Code: 5e 07 12 00 b9 00 04 00 00 3d 00 04 00 00 0f 4f c1 3d 00 04 00 00 89 45 b0 0f 84 c3 00 00 00 48 63 45 b0 49 8b 9c c4 f8 00 00 00 <48> 8b 43 20 48 85 c0 74 b6 48 89 df e8 46 37 44 00 48 8b 53 10
   CR2: 0000000000000020

Separated __kmem_cache_release from __kmem_cache_shutdown which now
called on slab_kmem_cache_release (after the last reference to sysfs
file object has dropped).

Reintroduced locking in free_partial as sysfs file might access cache's
partial list after shutdowning - partial revert of the commit
69cb8e6b ("slub: free slabs without holding locks").  Zap
__remove_partial and use remove_partial (w/o underscores) as
free_partial now takes list_lock which s partial revert for commit
1e4dd946 ("slub: do not assert not having lock in removing freed
partial")
Signed-off-by: NDmitry Safonov <dsafonov@virtuozzo.com>
Suggested-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remap_file_pages(2) emulation can reach file which represents removed
IPC ID as long as a memory segment is mapped.  It breaks expectations of
IPC subsystem.

Test case (rewritten to be more human readable, originally autogenerated
by syzkaller[1]):

	#define _GNU_SOURCE
	#include <stdlib.h>
	#include <sys/ipc.h>
	#include <sys/mman.h>
	#include <sys/shm.h>

	#define PAGE_SIZE 4096

	int main()
	{
		int id;
		void *p;

		id = shmget(IPC_PRIVATE, 3 * PAGE_SIZE, 0);
		p = shmat(id, NULL, 0);
		shmctl(id, IPC_RMID, NULL);
		remap_file_pages(p, 3 * PAGE_SIZE, 0, 7, 0);

	        return 0;
	}

The patch changes shm_mmap() and code around shm_lock() to propagate
locking error back to caller of shm_mmap().

[1] http://github.com/google/syzkallerSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kselftest Framework now has a dedicated mailing list linux-kselftest.
Update the entry in MAINTAINERS file.
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pmem driver calls devm_memremap() to map a persistent memory range.
When the pmem driver is unloaded, this memremap'd range is not released
so the kernel will leak a vma.

Fix devm_memremap_release() to handle a given memremap'd address
properly.
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently incorrect default hugepage pool size is reported by proc
nr_hugepages when number of pages for the default huge page size is
specified twice.

When multiple huge page sizes are supported, /proc/sys/vm/nr_hugepages
indicates the current number of pre-allocated huge pages of the default
size.  Basically /proc/sys/vm/nr_hugepages displays default_hstate->
max_huge_pages and after boot time pre-allocation, max_huge_pages should
equal the number of pre-allocated pages (nr_hugepages).

Test case:

Note that this is specific to x86 architecture.

Boot the kernel with command line option 'default_hugepagesz=1G
hugepages=X hugepagesz=2M hugepages=Y hugepagesz=1G hugepages=Z'.  After
boot, 'cat /proc/sys/vm/nr_hugepages' and 'sysctl -a | grep hugepages'
returns the value X.  However, dmesg output shows that Z huge pages were
pre-allocated.

So, the root cause of the problem here is that the global variable
default_hstate_max_huge_pages is set if a default huge page size is
specified (directly or indirectly) on the command line.  After the command
line processing in hugetlb_init, if default_hstate_max_huge_pages is set,
the value is assigned to default_hstae.max_huge_pages.  However,
default_hstate.max_huge_pages may have already been set based on the
number of pre-allocated huge pages of default_hstate size.

The solution to this problem is if hstate->max_huge_pages is already set
then it should not set as a result of global max_huge_pages value.
Basically if the value of the variable hugepages is set multiple times on
a command line for a specific supported hugepagesize then proc layer
should consider the last specified value.
Signed-off-by: NVaishali Thakkar <vaishali.thakkar@oracle.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3565fce3 ("mm, x86: get_user_pages() for dax mappings") has
moved up the pte_page(pte) in x86's fast gup_pte_range(), for no
discernible reason: put it back where it belongs, after the pte_flags
check and the pfn_valid cross-check.

That may be the cause of the NULL pointer dereference in
gup_pte_range(), seen when vfio called vaddr_get_pfn() when starting a
qemu-kvm based VM.
Signed-off-by: NHugh Dickins <hughd@google.com>
Reported-by: NMichael Long <Harn-Solo@gmx.de>
Tested-by: NMichael Long <Harn-Solo@gmx.de>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't require a dedicated thread for fsnotify cleanup.  Switch it
over to a workqueue job instead that runs on the system_unbound_wq.

In the interest of not thrashing the queued job too often when there are
a lot of marks being removed, we delay the reaper job slightly when
queueing it, to allow several to gather on the list.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Tested-by: NEryu Guan <guaneryu@gmail.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit c510eff6 ("fsnotify: destroy marks with
call_srcu instead of dedicated thread").

Eryu reported that he was seeing some OOM kills kick in when running a
testcase that adds and removes inotify marks on a file in a tight loop.

The above commit changed the code to use call_srcu to clean up the
marks.  While that does (in principle) work, the srcu callback job is
limited to cleaning up entries in small batches and only once per jiffy.
It's easily possible to overwhelm that machinery with too many call_srcu
callbacks, and Eryu's reproduer did just that.

There's also another potential problem with using call_srcu here.  While
you can obviously sleep while holding the srcu_read_lock, the callbacks
run under local_bh_disable, so you can't sleep there.

It's possible when putting the last reference to the fsnotify_mark that
we'll end up putting a chain of references including the fsnotify_group,
uid, and associated keys.  While I don't see any obvious ways that that
could occurs, it's probably still best to avoid using call_srcu here
after all.

This patch reverts the above patch.  A later patch will take a different
approach to eliminated the dedicated thread here.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reported-by: NEryu Guan <guaneryu@gmail.com>
Tested-by: NEryu Guan <guaneryu@gmail.com>
Cc: Jan Kara <jack@suse.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Grazvydas Ignotas has reported a regression in remap_file_pages()
emulation.

Testcase:
	#define _GNU_SOURCE
	#include <assert.h>
	#include <stdlib.h>
	#include <stdio.h>
	#include <sys/mman.h>

	#define SIZE    (4096 * 3)

	int main(int argc, char **argv)
	{
		unsigned long *p;
		long i;

		p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
				MAP_SHARED | MAP_ANONYMOUS, -1, 0);
		if (p == MAP_FAILED) {
			perror("mmap");
			return -1;
		}

		for (i = 0; i < SIZE / 4096; i++)
			p[i * 4096 / sizeof(*p)] = i;

		if (remap_file_pages(p, 4096, 0, 1, 0)) {
			perror("remap_file_pages");
			return -1;
		}

		if (remap_file_pages(p, 4096 * 2, 0, 1, 0)) {
			perror("remap_file_pages");
			return -1;
		}

		assert(p[0] == 1);

		munmap(p, SIZE);

		return 0;
	}

The second remap_file_pages() fails with -EINVAL.

The reason is that remap_file_pages() emulation assumes that the target
vma covers whole area we want to over map.  That assumption is broken by
first remap_file_pages() call: it split the area into two vma.

The solution is to check next adjacent vmas, if they map the same file
with the same flags.

Fixes: c8d78c18 ("mm: replace remap_file_pages() syscall with emulation")
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

DAX doesn't deposit pgtables when it maps huge pages: nothing to
withdraw. It can lead to crash.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A non-atomic PCM stream may take snd_pcm_link_rwsem rw semaphore twice
in the same code path, e.g. one in snd_pcm_action_nonatomic() and
another in snd_pcm_stream_lock().  Usually this is OK, but when a
write lock is issued between these two read locks, the problem
happens: the write lock is blocked due to the first reade lock, and
the second read lock is also blocked by the write lock.  This
eventually deadlocks.

The reason is the way rwsem manages waiters; it's queued like FIFO, so
even if the writer itself doesn't take the lock yet, it blocks all the
waiters (including reads) queued after it.

As a workaround, in this patch, we replace the standard down_write()
with an spinning loop.  This is far from optimal, but it's good
enough, as the spinning time is supposed to be relatively short for
normal PCM operations, and the code paths requiring the write lock
aren't called so often.
Reported-by: NVinod Koul <vinod.koul@intel.com>
Tested-by: NRamesh Babu <ramesh.babu@intel.com>
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove the ftrace module notifier in favor of directly calling
ftrace_module_enable() and ftrace_release_mod() in the module loader.
Hard-coding the function calls directly in the module loader removes
dependence on the module notifier call chain and provides better
visibility and control over what gets called when, which is important
to kernel utilities such as livepatch.

This fixes a notifier ordering issue in which the ftrace module notifier
(and hence ftrace_module_enable()) for coming modules was being called
after klp_module_notify(), which caused livepatch modules to initialize
incorrectly. This patch removes dependence on the module notifier call
chain in favor of hard coding the corresponding function calls in the
module loader. This ensures that ftrace and livepatch code get called in
the correct order on patch module load and unload.

Fixes: 5156dca3 ("ftrace: Fix the race between ftrace and insmod")
Signed-off-by: NJessica Yu <jeyu@redhat.com>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
Reviewed-by: NPetr Mladek <pmladek@suse.cz>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pull block fixes from Jens Axboe:
 "A collection of fixes from the past few weeks that should go into 4.5.
  This contains:

   - Overflow fix for sysfs discard show function from Alan.

   - A stacking limit init fix for max_dev_sectors, so we don't end up
     artificially capping some use cases.  From Keith.

   - Have blk-mq proper end unstarted requests on a dying queue, instead
     of pushing that to the driver.  From Keith.

   - NVMe:
        - Update to Kconfig description for NVME_SCSI, since it was
          vague and having it on is important for some SUSE distros.
          From Christoph.
        - Set of fixes from Keith, around surprise removal. Also kills
          the no-merge flag, so it supports merging.

   - Set of fixes for lightnvm from Matias, Javier, and Wenwei.

   - Fix null_blk oops when asked for lightnvm, but not available.  From
     Matias.

   - Copy-to-user EINTR fix from Hannes, fixing a case where SG_IO fails
     if interrupted by a signal.

   - Two floppy fixes from Jiri, fixing signal handling and blocking
     open.

   - A use-after-free fix for O_DIRECT, from Mike Krinkin.

   - A block module ref count fix from Roman Pen.

   - An fs IO wait accounting fix for O_DSYNC from Stephane Gasparini.

   - Smaller reallo fix for xen-blkfront from Bob Liu.

   - Removal of an unused struct member in the deadline IO scheduler,
     from Tahsin.

   - Also from Tahsin, properly initialize inode struct members
     associated with cgroup writeback, if enabled.

   - From Tejun, ensure that we keep the superblock pinned during cgroup
     writeback"

* 'for-linus' of git://git.kernel.dk/linux-block: (25 commits)
  blk: fix overflow in queue_discard_max_hw_show
  writeback: initialize inode members that track writeback history
  writeback: keep superblock pinned during cgroup writeback association switches
  bio: return EINTR if copying to user space got interrupted
  NVMe: Rate limit nvme IO warnings
  NVMe: Poll device while still active during remove
  NVMe: Requeue requests on suspended queues
  NVMe: Allow request merges
  NVMe: Fix io incapable return values
  blk-mq: End unstarted requests on dying queue
  block: Initialize max_dev_sectors to 0
  null_blk: oops when initializing without lightnvm
  block: fix module reference leak on put_disk() call for cgroups throttle
  nvme: fix Kconfig description for BLK_DEV_NVME_SCSI
  kernel/fs: fix I/O wait not accounted for RW O_DSYNC
  floppy: refactor open() flags handling
  lightnvm: allow to force mm initialization
  lightnvm: check overflow and correct mlc pairs
  lightnvm: fix request intersection locking in rrpc
  lightnvm: warn if irqs are disabled in lock laddr
  ...

Pull DeviceTree fixes from Rob Herring:

 - Fix irq msi-map calculation for nonzero rid-base.

 - Binding doc updates for GICv3, fsl-imx-uart, and S3C RTC.

* tag 'devicetree-fixes-for-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  rtc: s3c: Document required clocks in the DT binding
  serial: fsl-imx-uart: Fix typo in fsl,dte-mode description
  dt-bindings: arm, gic-v3: require that reserved cells are always 0
  of/irq: Fix msi-map calculation for nonzero rid-base

Pull drm fixes from Dave Airlie:
 "This has two main sets of fixes:

   - A bunch of Exynos fixes, mainly for their MIC component.

   - vblank regression fixes from Mario, apparantly some changes in 4.4
     caused some vblank breakage on radeon/nouveau, this set fixes all
     the issues seen.

  There is also a revert of one of the MST changse, that I was
  overzealous in including, that broke 30" MST monitors, and two qxl
  fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/qxl: fix erroneous return value
  drm/nouveau/display: Enable vblank irqs after display engine is on again.
  drm/radeon/pm: Handle failure of drm_vblank_get.
  drm: Fix treatment of drm_vblank_offdelay in drm_vblank_on() (v2)
  drm: Fix drm_vblank_pre/post_modeset regression from Linux 4.4
  drm: Prevent vblank counter bumps > 1 with active vblank clients. (v2)
  drm: No-Op redundant calls to drm_vblank_off() (v2)
  drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command
  Revert "drm/dp/mst: change MST detection scheme"
  drm/exynos/decon: fix disable clocks order
  drm/exynos: fix incorrect cpu address for dma_mmap_attrs()
  drm/exynos: exynos5433_decon: fix wrong state in decon_vblank_enable
  drm/exynos: exynos5433_decon: fix wrong state assignment in decon_enable
  drm/exynos: dsi: restore support for drm bridge
  drm/exynos: mic: make all functions static
  drm/exynos: mic: convert to component framework
  drm/exynos: mic: use devm_clk interface
  drm/exynos: fix types for compilation on 64bit architectures
  drm/exynos: ipp: fix incorrect format specifiers in debug messages
  drm/exynos: depend on ARCH_EXYNOS for DRM_EXYNOS

Merge tag 'trace-fixes-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This includes two fixes.

  The first is something that has come up a few times and has been
  worked out individually, but it's come up now enough that the problem
  should be generic.  Tracepoints are protected by RCU sched.  There are
  several tracepoints within core infrastructure like kfree().  If a
  tracepoint is called when the CPU is going down, or when it's coming
  up but has yet to be recognized by RCU, a RCU warning is triggered.

  This is a true bug as that tracepoint is not protected by RCU.
  Usually, this is taken care of by testing for cpu online as a
  tracepoint condition.  But as this is happening more often, moving it
  from a individual tracepoint to a check in the tracepoint
  infrastructure is more robust.

  Note, there is now a duplicate of a cpu online test, because this
  update does not remove the individual checks.  But the overhead is
  small enough that the removal can be done in another release.

  The second change is strange linker breakage due to the branch
  tracer's builtin_constant_p() check failing, and treating the
  condition as a variable instead of a constant.  Arnd Bergmann found
  that this can be fixed by testing !!(cond) instead of just (cond)"

* tag 'trace-fixes-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix freak link error caused by branch tracer
  tracepoints: Do not trace when cpu is offline