The da903x driver produces an annoying false-positive warning
when built with clang:

drivers/regulator/da903x.c:395:2: error: division by zero is undefined [-Werror,-Wdivision-by-zero]
        DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */
        ^                          ~
drivers/regulator/da903x.c:359:2: note: expanded from macro 'DA9030_LDO'
        DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit)
        ^                                 ~~~~
drivers/regulator/da903x.c:320:39: note: expanded from macro 'DA903x_LDO'
                .n_voltages = (step) ? ((max - min) / step + 1) : 1,    \
                                                    ^ ~~~~
drivers/regulator/da903x.c:415:2: error: division by zero is undefined [-Werror,-Wdivision-by-zero]
        DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */
        ^                         ~
drivers/regulator/da903x.c:356:2: note: expanded from macro 'DA9034_LDO'
        DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit)
        ^                                 ~~~~
drivers/regulator/da903x.c:320:39: note: expanded from macro 'DA903x_LDO'
                .n_voltages = (step) ? ((max - min) / step + 1) : 1,    \
                                                    ^ ~~~~

I already reported this as a bug in clang, but it may take a
while to fix it. As I have not been able to come up with any
reasonable workaround, I would just disable compilation here.

Link: https://bugs.llvm.org/show_bug.cgi?id=38789Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add regulator support for max77650. We support all four variants of this
PMIC including non-linear voltage table for max77651 SBB1 rail.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

BD70528MWV is an ultra-low Iq general purpose single-chip power
management IC for battery-powered portable devices.

Add support for controlling 3 bucks and 3 LDOs present in
ROHM BD70528.
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Fix few trivial language typos in core and drivers.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Fix build error when CONFIG_REGMAP_I2C=m && CONFIG_REGULATOR_MCP16502=y.

drivers/regulator/mcp16502.o: In function `mcp16502_probe':
mcp16502.c:(.text+0xca): undefined reference to `__devm_regmap_init_i2c'
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds a regulator driver for the MCP16502 PMIC.
This drivers supports basic operations through the
regulator interface such as:
- setting/reading voltage
- setting/reading operating mode
- reading current status
Signed-off-by: NAndrei Stefanescu <andrei.stefanescu@microchip.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.

The Lochnagar board provides power supplies for the attached
CODEC/Amp device. Currently this driver supports the microphone
supplies and the digital core voltage for the attached
device. There are some additional supplies that will be
added in time but these supplies are sufficient for most
systems/use-cases.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The stpmic1 PMIC embeds several regulators and switches with
different capabilities.
Signed-off-by: Npascal paillet <p.paillet@st.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rename bd71837-regulator.c to bd718x7-regulator.c to reflect the
fact that also BD71847 is now supported by the driver.
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add the QCOM RPMh regulator driver to manage PMIC regulators
which are controlled via RPMh on some Qualcomm Technologies, Inc.
SoCs.  RPMh is a hardware block which contains several
accelerators which are used to manage various hardware resources
that are shared between the processors of the SoC.  The final
hardware state of a regulator is determined within RPMh by
performing max aggregation of the requests made by all of the
processors.

Add support for PMIC regulator control via the voltage regulator
manager (VRM) and oscillator buffer (XOB) RPMh accelerators.
VRM supports manipulation of enable state, voltage, and mode.
XOB supports manipulation of enable state.
Signed-off-by: NDavid Collins <collinsd@codeaurora.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

MFD part for bd71837 was changed during the review. Clean regulator part to
match changed MFD:
- renamed header file => fix include
- remove unused platdata as also type definition was removed
- Kconfig option for MFD part was changed => fix depends on clause
- Rename Kconfig option for regulators
  As Kconfig option for regulators gets now used (when dependency to MFD is
  satisfied) change it so that it won't require new change when support for
  bd71847 is added.
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Initial commit to add support for regulators implemented in UniPhier SoCs.
This supports USB VBUS only.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This extends the pfuze100 driver with pfuze3001 support.

Latest datasheet:
https://www.nxp.com/docs/en/data-sheet/PF3001.pdfSigned-off-by: NRobin Gong <yibin.gong@nxp.com>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Support for controlling the 8 bucks and 7 LDOs the PMIC contains.
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SY8106A is an I2C attached single output regulator made by Silergy Corp,
which is used on several Allwinner H3/H5 SBCs to control the power
supply of the ARM cores.

Add a driver for it.
Signed-off-by: NOndrej Jirman <megous@megous.com>
[Icenowy: Change commit message, remove enable/disable code, add default
 ramp_delay, add comment for go bit, add code for fixed mode voltage]
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This chip is found on Google Chromecast and Valve Steam Link devices.
It provides two DC regulators with I2C voltage control, separate GPIO
enable pins and one sleep mode pin.

This driver does not expose GPIO functionality, but supports voltage
control in 1.0-2.2V range, based on I2C register information given in
Chromecast kernel driver by Jisheng Zhang.

Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: NAlexander Monakov <amonakov@ispras.ru>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add regulator driver for Spreadtrum SC2731 device.
It has 17 general purpose LDOs, BUCKs generator and
digital output to control regulators.
Signed-off-by: NErick Chen <erick.chen@spreadtrum.com>
Reviewed-by: NBaolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This is update for supporting additional devices da9223/4/5.
Only device strings is added because only package type is different.
Signed-off-by: NJames Ban <James.Ban..opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add regulator driver for STM32 voltage reference buffer which can be
used as voltage reference for ADCs, DACs and external components through
dedicated VREF+ pin.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Extend the driver to support Ricoh RC5T619.
Support the additional regulators and slightly different voltage ranges.
Signed-off-by: NPierre-Hugues Husson <phh@phh.me>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add support for the rk805 regulator. The regulator module consists
of 4 DCDCs, 3 LDOs.

The output voltages are configurable and are meant to supply power
to the main processor and other components.
Signed-off-by: NElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: NJoseph Chen <chenjh@rock-chips.com>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The MT6380 is a regulator found those boards with MediaTek MT7622 SoC
It is connected as a slave to the SoC using MediaTek PMIC wrapper which
is the common interface connecting with Mediatek made various PMICs.
Signed-off-by: NChenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

add the driver for hi6421v530 voltage regulator
Signed-off-by: NWang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: NGuodong Xu <guodong.xu@linaro.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Regulator support for the DA9061 is added into the DA9062 regulator driver.

The regulators for DA9061 differ from those of DA9062.
A new DA9061 enumeration list for the LDOs and Bucks supported by this
device is added. Regulator information added: the old regulator
information for DA9062 is renamed from local_regulator_info[] to
local_da9062_regulator_info[] and a new array is added to support
local_da9061_regulator_info[].

The probe() function switches on the da9062_compatible_types enumeration
and configures the correct da9062_regulator_info array and number of
regulator entries.

Kconfig is updated to reflect support for DA9061 and DA9062 regulators.
Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The regulators set consists of 4 BUCKs. The output
voltages are configurable and are meant to supply power to the
main processor and other components. The ramp delay is configurable
for all BUCKs. The BUCKs can be configured in single phase or
multiphase modes.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add driver for the regulator block in the ROHM BD9571MWV-W MFD PMIC.
This block supports three voltage monitors, VD18, VD25, VD33 for the
1V8, 2V5, 3V3 voltage rails and a single voltage regulator for the
DVFS rail.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The CS47L24 Arizona codec and most Madera codecs do not have a LDO1
regulator. Split the LDO1 and MICSUPP regulators into separate KConfig
options so the LDO1 is only built into the kernel if needed.
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add regulator driver for the device TI TPS65132 which is single
inductor - dual output power supply device. TPS65132 device is
designed to support general positive/negative driven applications
like TFT display panels.

TPS65132 regulator driver supports to enable/disable and set voltage
on its output.
Signed-off-by: NVenkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The output voltage of a voltage controlled regulator can be controlled
through the voltage of another regulator. The current version of this
driver assumes that the output voltage is a linear function of the control
voltage.
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Many Motorola phones like droid 4 are using a custom PMIC called CPCAP
or 6556002. This PMIC is used with several SoCs, I've noticed at least
omap3, omap4 and Tegra2 based Motorola phones and tablets using it.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add support for the rk818 regulator. The regulator module consists
of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
power OTG and HDMI5V.

The output voltages are configurable and are meant to supply power
to the main processor and other components.
Signed-off-by: NWadim Egorov <w.egorov@phytec.de>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Change the MFD config option as per latest naming
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Fix typo in regulator Kconfig for the TPS80031 tristate string (trivial)
Signed-off-by: NSebastiaan Schalbroeck <schalbroeck@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support for the Linear Technology LTC3676
8-output I2C voltage regulator IC.

Cc: Jaffer Kapasi <jkapasi@linear.com>
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The MT6323 is a regulator found on boards based on MediaTek MT7623 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Signed-off-by: NChen Zhong <chen.zhong@mediatek.com>
Signed-off-by: NJohn Crispin <john@phrozen.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Extend the driver to support Ricoh RN5T567. Support the additional
DCDC and slightly different voltage range of LDORTC1.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Reviewed-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The CONFIG_REGULATOR_PFUZE100 option also supports PFUZE3000, so
mention that in the Kconfig text.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The regulators set consists of 2 BUCKs and 2 LDOs. The output
voltages are configurable and are meant to supply power to the
main processor and other components. The ramp delay is configurable
for both BUCKs.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This is the driver for the Powerventure PV88080 BUCKs regulator.
It communicates via an I2C bus to the device.
Signed-off-by: NJames Ban <James.Ban..opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The driver MAX8973 supports the driver for Maxim PMIC MAX77621.
MAX77621 supports the junction temp warning at 120 degC and
140 degC which is configurable. It generates alert signal when
junction temperature crosses these threshold.

MAX77621 does not support the continuous temp monitoring of
junction temperature. It just report whether junction temperature
crossed the threshold or not.

Add support to
- Configure junction temp warning threshold via DT property
to generate alert when it crosses the threshold.
- Add support to interrupt the host from this device when alert
occurred.
- read the junction temp via thermal framework.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@kernel.org>