The failure during iw_cm module initialization partially left the system
with unreleased memory and other resources. Rewrite the module init/exit
routines in such way that netlink commands will be opened only after
successful initialization.

Fixes: b493d91d ("iwcm: common code for port mapper")
Link: https://lore.kernel.org/r/b01239f99cb1a3e6d2b0694c242d89e6410bcd93.1627048781.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.

Link: https://lore.kernel.org/r/1626674454-56075-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by: NXiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: NXin Tan <tanxin.ctf@gmail.com>
Tested-by: NJosh Fisher <josh.fisher@cornelisnetworks.com>
Acked-by: NDennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

It is possible for the primary IPoIB network device associated with any
RDMA device to fail to join certain multicast groups preventing IPv6
neighbor discovery and possibly other network ULPs from working
correctly. The IPv4 broadcast group is not affected as the IPoIB network
device handles joining that multicast group directly.

This is because the primary IPoIB network device uses the pkey at ndex 0
in the associated RDMA device's pkey table. Anytime the pkey value of
index 0 changes, the primary IPoIB network device automatically modifies
it's broadcast address (i.e. /sys/class/net/[ib0]/broadcast), since the
broadcast address includes the pkey value, and then bounces carrier. This
includes initial pkey assignment, such as when the pkey at index 0
transitions from the opa default of invalid (0x0000) to some value such as
the OPA default pkey for Virtual Fabric 0: 0x8001 or when the fabric
manager is restarted with a configuration change causing the pkey at index
0 to change. Many network ULPs are not sensitive to the carrier bounce and
are not expecting the broadcast address to change including the linux IPv6
stack.  This problem does not affect IPoIB child network devices as their
pkey value is constant for all time.

To mitigate this issue, change the default pkey in at index 0 to 0x8001 to
cover the predominant case and avoid issues as ipoib comes up and the FM
sweeps.

At some point, ipoib multicast support should automatically fix
non-broadcast addresses as it does with the primary broadcast address.

Fixes: 77241056 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210715160445.142451.47651.stgit@awfm-01.cornelisnetworks.comSuggested-by: NJosh Collier <josh.d.collier@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

There is no counter for dmawait in AIP, which hampers debugging
performance issues.

Add the counter increment when the txq is queued.

Fixes: d99dc602 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210715160440.142451.8278.stgit@awfm-01.cornelisnetworks.comSigned-off-by: NMike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Leon Romanovsky says:

====================
Add ConnectX DCS offload support

This patchset from Lior adds support of DCI stream channel (DCS) support.

DCS is an offload to SW load balancing of DC initiator work requests.

A single DC QP initiator (DCI) can be connected to only one target at the
time and can't start new connection until the previous work request is
completed.

This limitation causes to delays when the initiator process needs to
transfer data to multiple targets at the same time.
====================

* branch 'mlx5_dcs':
  RDMA/mlx5: Add DCS offload support
  RDMA/mlx5: Separate DCI QP creation logic
  net/mlx5: Add DCS caps & fields support

DCS is an offload to SW load balancing of DC initiator work requests.

A single DCI can be connected to only one target at the time and can't
start new connection until the previous work request is completed.  This
limitation will cause to delay when the initiator process needs to
transfer data to multiple targets at the same time.  The SW solution is to
use a process that handling and spreading the work request on many DCIs
according to destinations.

This feature is an offload to this process and coming to reduce the load
from the CPU and improve the performance.

Link: https://lore.kernel.org/r/491c2c2afdb5b07de7f03eab3f93cf0704549dbc.1624258894.git.leonro@nvidia.comReviewed-by: NMeir Lichtinger <meirl@nvidia.com>
Signed-off-by: NLior Nahmanson <liorna@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

This patch isolates DCI QP creation logic to separate function, so this
change will reduce complexity when adding new features to DCI QP without
interfering with other QP types.

The code was copied from create_user_qp() while taking only DCI relevant bits.

Link: https://lore.kernel.org/r/b4530bdd999349c59691224f016ff1efb5dc3b92.1624258894.git.leonro@nvidia.comReviewed-by: NMeir Lichtinger <meirl@nvidia.com>
Signed-off-by: NLior Nahmanson <liorna@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

This fields will be needed when adding a support for DCS offload

max_dci_stream_channels - maximum DCI stream channels supported per DCI.
max_dci_errored_streams - maximum DCI error stream channels
supported per DCI before a DCI move to error state.
Signed-off-by: NLior Nahmanson <liorna@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>

Currently the ICRC is generated as a u32 type and then forced to a __be32
and stored into the ICRC field in the packet. The actual type of the ICRC
is __be32. This patch replaces u32 by __be32 and eliminates the casts.
The computation is exactly the same as the original but the types are more
consistent.

Link: https://lore.kernel.org/r/20210707040040.15434-10-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

This patch adds kernel-doc style comments to rxe_icrc.c

Link: https://lore.kernel.org/r/20210707040040.15434-9-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

This patch collects the code from rxe_register_device() that sets up the
crc32 calculation into a subroutine rxe_icrc_init() in rxe_icrc.c.

Link: https://lore.kernel.org/r/20210707040040.15434-8-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

rxe_icrc_hdr() in rxe_icrc.c is no longer shared. This patch makes it
static and changes the parameter list to match the other routines there.

Link: https://lore.kernel.org/r/20210707040040.15434-7-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Move rxe_crc32() from rxe.h to rxe_icrc.c as a static local function.

Link: https://lore.kernel.org/r/20210707040040.15434-6-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Isolate ICRC generation into a single subroutine named rxe_generate_icrc()
in rxe_icrc.c. Remove scattered crc generation code from elsewhere.

Link: https://lore.kernel.org/r/20210707040040.15434-5-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Fixup rxe_send() and rxe_loopback() in rxe_net.c to have the same calling
sequence. This patch makes them static and have the same parameter list
and return value.

Link: https://lore.kernel.org/r/20210707040040.15434-4-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

rxe_xmit_packet() was an overlong inline subroutine. This patch moves it
into rxe_net.c as an ordinary subroutine.

Link: https://lore.kernel.org/r/20210707040040.15434-3-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: NZhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Move the code in rxe_recv() that checks the ICRC on incoming packets to a
subroutine rxe_check_icrc() and move that to rxe_icrc.c.

Link: https://lore.kernel.org/r/20210707040040.15434-2-rpearsonhpe@gmail.comSigned-off-by: NBob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: NZhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

ib_query_port() calls device->ops.query_port() to get the port
attributes. The method of querying is device driver specific.  The same
function calls device->ops.query_gid() to get the GID and extract the
subnet_prefix (gid_prefix).

The GID and subnet_prefix are stored in a cache. But they do not get
read from the cache if the device is an Infiniband device. The
following change takes advantage of the cached subnet_prefix.
Testing with RDBMS has shown a significant improvement in performance
with this change.

Link: https://lore.kernel.org/r/20210712122625.1147-4-anand.a.khoje@oracle.comSigned-off-by: NAnand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: NHaakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The lock cache_lock of struct ib_device is initialized in function
ib_cache_setup_one(). This is much later than the device initialization in
_ib_alloc_device().

This change shifts initialization of cache_lock in _ib_alloc_device().

Link: https://lore.kernel.org/r/20210712122625.1147-3-anand.a.khoje@oracle.comSuggested-by: NHaakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: NAnand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Currently, cache for subnet_prefix was getting updated by reading port
attributes via ib_query_port. ib_query_port() calls ops.query_gid() to get
subnet_prefix and returns it via port_attr.

In ib_cache_update(), config_non_roce_gid_cache() obtains GIDs by calling
ops.query_gid(). We utilize this to store subnet_prefix in cache.

Link: https://lore.kernel.org/r/20210712122625.1147-2-anand.a.khoje@oracle.comSuggested-by: NJason Gunthorpe <jgg@nvidia.com>
Suggested-by: NAru Kolappan <aru.kolappan@oracle.com>
Signed-off-by: NAnand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: NHaakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The hardware stats API distinguishes between device and port statistics,
split the EFA stats accordingly instead of always dumping everything.

Link: https://lore.kernel.org/r/20210712105923.17389-1-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Lijun has moved to work in other technical areas, and Wenpeng will
maintain this modules instead of him.

Link: https://lore.kernel.org/r/1625741958-51363-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Drop duplicated code

Link: https://lore.kernel.org/r/20210702123024.37025-1-ice_yangxiao@163.comSigned-off-by: NXiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: NHåkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: NBob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]

The use of kmap() in siw_tx_hdt() is all thread local therefore
kmap_local_page() is a sufficient replacement and will work with pgmap
protected pages when those are implemented.

siw_tx_hdt() tracks pages used in a page_array.  It uses that array to
unmap pages which were mapped on function exit.  Not all entries in the
array are mapped and this is tracked in kmap_mask.

kunmap_local() takes a mapped address rather than a page.  Alter
siw_unmap_pages() to take the iov array to reuse the iov_base address of
each mapping.  Use PAGE_MASK to get the proper address for kunmap_local().

kmap_local_page() mappings are tracked in a stack and must be unmapped in
the opposite order they were mapped in.  Because segments are mapped into
the page array in increasing index order, modify siw_unmap_pages() to
unmap pages in decreasing order.

Use kmap_local_page() instead of kmap() to map pages in the page_array.

[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/

Link: https://lore.kernel.org/r/20210624174814.2822896-1-ira.weiny@intel.comSigned-off-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NBernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]

These uses of kmap() in the SIW driver are thread local.  Therefore
kmap_local_page() is sufficient to use and will work with pgmap protected
pages when those are implemnted.

There is one more use of kmap() in this driver which is split into its own
patch because kmap_local_page() has strict ordering rules and the use of
the kmap_mask over multiple segments must be handled carefully.
Therefore, that conversion is handled in a stand alone patch.

Use kmap_local_page() instead of kmap() in the 'easy' cases.

[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/

Link: https://lore.kernel.org/r/20210622061422.2633501-4-ira.weiny@intel.comSigned-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

In order to account HB for sq_wr_avail properly, move sq_wr_avail from
rtrs_srv_con to rtrs_con.

Although rtrs-clt do not care sq_wr_avail, but still init it to
max_send_wr.

Fixes: b38041d5 ("RDMA/rtrs: Do not signal for heatbeat")
Link: https://lore.kernel.org/r/20210712060750.16494-7-jinpu.wang@ionos.comSigned-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NAleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: NGioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

flags is not used, so remove it from rtrs_post_rdma_write_imm_empty.

Link: https://lore.kernel.org/r/20210712060750.16494-6-jinpu.wang@ionos.comSigned-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NAleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: NGioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

It's only used in rtrs.c, so no need to export.

Link: https://lore.kernel.org/r/20210712060750.16494-5-jinpu.wang@ionos.comSigned-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NAleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: NGioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

On idle session, because we do not do signal for heartbeat, it will
overflow the send queue after sometime.

To avoid that, we need to enable the signal for heartbeat. To do that, add
a new member signal_interval in rtrs_path, which will set min of
queue_depth and SERVICE_CON_QUEUE_DEPTH, and track it for both heartbeat
and IO, so the sq queue full accounting is correct.

Fixes: b38041d5 ("RDMA/rtrs: Do not signal for heatbeat")
Link: https://lore.kernel.org/r/20210712060750.16494-4-jinpu.wang@ionos.comSigned-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NAleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: NGioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

We need to track also the wr used for heatbeat. This is a preparation for
that, will be used in later patch.

The io_cnt in rtrs_clt is removed, use wr_cnt instead.

Link: https://lore.kernel.org/r/20210712060750.16494-3-jinpu.wang@ionos.comSigned-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NAleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: NGioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

It could help debugging in case of error happens.

Link: https://lore.kernel.org/r/20210712060750.16494-2-jinpu.wang@ionos.comSigned-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NAleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: NGioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Reviewed-by: NAlistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.

Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NAlistair Popple <apopple@nvidia.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Reported-by: Nkernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.

It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped.  Refine the tests.

There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.

(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)

Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.

TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Reviewed-by: NAlistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Ingo Molnar:
 "Two fixes:

   - Fix a MIPS IRQ handling RCU bug

   - Remove a DocBook annotation for a parameter that doesn't exist
     anymore"

* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
  genirq/irqdesc: Drop excess kernel-doc entry @lookup

Pull scheduler fixes from Ingo Molnar:
 "Three fixes:

   - Fix load tracking bug/inconsistency

   - Fix a sporadic CFS bandwidth constraints enforcement bug

   - Fix a uclamp utilization tracking bug for newly woken tasks"

* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Ignore max aggregation if rq is idle
  sched/fair: Fix CFS bandwidth hrtimer expiry type
  sched/fair: Sync load_sum with load_avg after dequeue

Pull perf fixes from Ingo Molnar:
 "A fix and a hardware-enablement addition:

   - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup

   - Add cstate event support for Intel ICELAKE_X and ICELAKE_D"

* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Clean up error handling path of iio mapping
  perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support

Pull locking fixes from Ingo Molnar:

 - Fix a Sparc crash

 - Fix a number of objtool warnings

 - Fix /proc/lockdep output on certain configs

 - Restore a kprobes fail-safe

* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: sparc: Fix arch_cmpxchg64_local()
  kprobe/static_call: Restore missing static_call_text_reserved()
  static_call: Fix static_call_text_reserved() vs __init
  jump_label: Fix jump_label_text_reserved() vs __init
  locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING