Currently, napi_thread_wait() checks for NAPI_STATE_SCHED bit to
determine if the kthread owns this napi and could call napi->poll() on
it. However, if socket busy poll is enabled, it is possible that the
busy poll thread grabs this SCHED bit (after the previous napi->poll()
invokes napi_complete_done() and clears SCHED bit) and tries to poll
on the same napi. napi_disable() could grab the SCHED bit as well.
This patch tries to fix this race by adding a new bit
NAPI_STATE_SCHED_THREADED in napi->state. This bit gets set in
____napi_schedule() if the threaded mode is enabled, and gets cleared
in napi_complete_done(), and we only poll the napi in kthread if this
bit is set. This helps distinguish the ownership of the napi between
kthread and other scenarios and fixes the race issue.

Fixes: 29863d41 ("net: implement threaded-able napi poll loop support")
Reported-by: NMartin Zaharinov <micron10@gmail.com>
Suggested-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NWei Wang <weiwan@google.com>
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ct_state validate should not only check the mask bit and also
check mask_bit & key_bit..
For the +new+est case example, The 'new' and 'est' bits should be
set in both state_mask and state flags. Or the -new-est case also
will be reject by kernel.
When Openvswitch with two flows
ct_state=+trk+new,action=commit,forward
ct_state=+trk+est,action=forward

A packet go through the kernel  and the contrack state is invalid,
The ct_state will be +trk-inv. Upcall to the ovs-vswitchd, the
finally dp action will be drop with -new-est+trk.

Fixes: 1bcc51ac ("net/sched: cls_flower: Reject invalid ct_state flags rules")
Fixes: 3aed8b63 ("net/sched: cls_flower: validate ct_state for invalid and reply flags")
Signed-off-by: Nwenxu <wenxu@ucloud.cn>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When openvswitch conntrack offload with act_ct action. The first rule
do conntrack in the act_ct in tc subsystem. And miss the next rule in
the tc and fallback to the ovs datapath but miss set post_ct flag
which will lead the ct_state_key with -trk flag.

Fixes: 7baf2429 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Nwenxu <wenxu@ucloud.cn>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Build currently fails with -Werror=maybe-uninitialized set:

net/wireless/nl80211.c: In function '__cfg80211_wdev_from_attrs':
net/wireless/nl80211.c:124:44: error: 'wdev_id' may be used
uninitialized in this function [-Werror=maybe-uninitialized]

Easy fix is to just initialize wdev_id to 0, since it's value doesn't
otherwise matter unless have_wdev_id is true.

Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver")
CC: Johannes Berg <johannes@sipsolutions.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jakub Kicinski <kuba@kernel.org>
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20210312163651.1398207-1-jarod@redhat.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled
channel instead.
Signed-off-by: NKarthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We have all the network interfaces marked as netns-local
since the only reasonable thing to do right now is to set
a whole device, including all netdevs, into a different
network namespace. For this reason, we also have our own
way of changing the network namespace.

Unfortunately, the RTNL locking changes broke this, and
it now results in many RTNL assertions. The trivial fix
for those (just hold RTNL for the changes) however leads
to deadlocks in the cfg80211 netdev notifier.

Since we only need the wiphy, and that's still protected
by the RTNL, add a new NL80211_FLAG_NO_WIPHY_MTX flag to
the nl80211 ops and use it to _not_ take the wiphy mutex
but only the RTNL. This way, the notifier does all the
work necessary during unregistration/registration of the
netdevs from the old and in the new namespace.
Reported-by: NSid Hayn <sidhayn@gmail.com>
Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210310215839.eadf7c43781b.I5fc6cf6676f800ab8008e03bbea9c3349b02d804@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

crypto_aead_encrypt returns <0 on error, so if these calls are not checked,
execution may continue with failed encrypts.  It also seems that these two
crypto_aead_encrypt calls are the only instances in the codebase that are
not checked for errors.
Signed-off-by: NDaniel Phan <daniel.phan36@gmail.com>
Link: https://lore.kernel.org/r/20210309204137.823268-1-daniel.phan36@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We observed some Cisco APs sending the following HE Operation IE in
associate response:

  ff 0a 24 f4 3f 00 01 fc ff 00 00 00

Its HE operation parameter is 0x003ff4, so the expected total length is
7 which does not match the actual length = 10. This causes association
failing with "HE AP is missing HE Capability/operation."

According to P802.11ax_D4 Table9-94, HE operation is extensible, and
according to 802.11-2016 10.27.8, STA should discard the part beyond
the maximum length and parse the truncated element.

Allow HE operation element to be longer than expected to handle this
case and future extensions.

Fixes: e4d005b8 ("mac80211: refactor extended element parsing")
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NYen-lin Lai <yenlinlai@chromium.org>
Link: https://lore.kernel.org/r/20210223051926.2653301-1-yenlinlai@chromium.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This probably came in through some refactoring and what is
now a call to minstrel_ht_group_min_rate_offset(), remove
the unused variable.
Reported-by: Nkernel test robot <lkp@intel.com>
Acked-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210219105744.f2538a80f6cf.I3d53554c158d5b896ac07ea546bceac67372ec28@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Clear beacon ie pointer and ie length after free
in order to prevent double free.

==================================================================
BUG: KASAN: double-free or invalid-free \
in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876

CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230
 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355
 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341
 kasan_slab_free include/linux/kasan.h:192 [inline]
 __cache_free mm/slab.c:3424 [inline]
 kfree+0xed/0x270 mm/slab.c:3760
 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline]
 __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212
 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172
 cfg80211_leave net/wireless/core.c:1221 [inline]
 cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040
 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline]
 call_netdevice_notifiers net/core/dev.c:2066 [inline]
 __dev_close_many+0xee/0x2e0 net/core/dev.c:1586
 __dev_close net/core/dev.c:1624 [inline]
 __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476
 dev_change_flags+0x8a/0x160 net/core/dev.c:8549
 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265
 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.deSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Coverity reported the strange "if (~...)" condition that's
always true. It suggested that ! was intended instead of ~,
but upon further analysis I'm convinced that what really was
intended was a comparison to 0xff/0xffff (in HT/VHT cases
respectively), since this indicates that all of the rates
are enabled.

Change the comparison accordingly.

I'm guessing this never really mattered because a reset to
not having a rate mask is basically equivalent to having a
mask that enables all rates.
Reported-by: NColin Ian King <colin.king@canonical.com>
Fixes: 2ffbe6d3 ("mac80211: fix and optimize MCS mask handling")
Fixes: b119ad6e ("mac80211: add rate mask logic for vht rates")
Reviewed-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210212112213.36b38078f569.I8546a20c80bc1669058eb453e213630b846e107b@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The previous patch ensures that the TX flags (struct
can_isotp_ll_options::tx_flags) are 0 for classic CAN frames or a user
configured value for CAN-FD frames.

This patch sets the CAN frames flags unconditionally to the ISO-TP TX
flags, so that they are initialized to a proper value. Otherwise when
running "candump -x" on a classical CAN ISO-TP stream shows wrongly
set "B" and "E" flags.

| $ candump any,0:0,#FFFFFFFF -extA
| [...]
| can0  TX B E  713   [8]  2B 0A 0B 0C 0D 0E 0F 00
| can0  TX B E  713   [8]  2C 01 02 03 04 05 06 07
| can0  TX B E  713   [8]  2D 08 09 0A 0B 0C 0D 0E
| can0  TX B E  713   [8]  2E 0F 00 01 02 03 04 05

Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

CAN-FD frames have struct canfd_frame::flags, while classic CAN frames
don't.

This patch refuses to set TX flags (struct
can_isotp_ll_options::tx_flags) on non CAN-FD isotp sockets.

Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.

CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:

  ip netns add foo
  ip link set can0 netns foo
  ip netns delete foo

WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[<c010e700>] (unwind_backtrace) from [<c010a1d8>] (show_stack+0x10/0x14)
[<c010a1d8>] (show_stack) from [<c086dc10>] (dump_stack+0x94/0xa8)
[<c086dc10>] (dump_stack) from [<c086b938>] (__warn+0xb8/0x114)
[<c086b938>] (__warn) from [<c086ba10>] (warn_slowpath_fmt+0x7c/0xac)
[<c086ba10>] (warn_slowpath_fmt) from [<c0629f20>] (ops_exit_list+0x38/0x60)
[<c0629f20>] (ops_exit_list) from [<c062a5c4>] (cleanup_net+0x230/0x380)
[<c062a5c4>] (cleanup_net) from [<c0142c20>] (process_one_work+0x1d8/0x438)
[<c0142c20>] (process_one_work) from [<c0142ee4>] (worker_thread+0x64/0x5a8)
[<c0142ee4>] (worker_thread) from [<c0148a98>] (kthread+0x148/0x14c)
[<c0148a98>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)

To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.

The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.

Fixes: e008b5fc ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.orgSigned-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Currently, Linux computes the HMAC contained in ADD_ADDR sub-option using
the Address Id and the IP Address, and hardcodes a destination port equal
to zero. This is not ok for ADD_ADDR with port: ensure to account for the
endpoint port when computing the HMAC, in compliance with RFC8684 §3.4.1.

Fixes: 22fb85ff ("mptcp: add port support for ADD_ADDR suboption writing")
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently tcp_check_req can be called with obsolete req socket for which big
socket have been already created (because of CPU race or early demux
assigning req socket to multiple packets in gro batch).

Commit e0f9759f ("tcp: try to keep packet if SYN_RCV race
is lost") added retry in case when tcp_check_req is called for PSH|ACK packet.
But if client sends RST+ACK immediatly after connection being
established (it is performing healthcheck, for example) retry does not
occur. In that case tcp_check_req tries to close req socket,
leaving big socket active.

Fixes: e0f9759f ("tcp: try to keep packet if SYN_RCV race is lost")
Signed-off-by: NAlexander Ovechkin <ovov@yandex-team.ru>
Reported-by: NOleg Senin <olegsenin@yandex-team.ru>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before calling tipc_aead_key_size(ptr), we need to ensure
we have enough data to dereference ptr->keylen.

We probably also want to make sure tipc_aead_key_size()
wont overflow with malicious ptr->keylen values.

Syzbot reported:

BUG: KMSAN: uninit-value in __tipc_nl_node_set_key net/tipc/node.c:2971 [inline]
BUG: KMSAN: uninit-value in tipc_nl_node_set_key+0x9bf/0x13b0 net/tipc/node.c:3023
CPU: 0 PID: 21060 Comm: syz-executor.5 Not tainted 5.11.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:120
 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197
 __tipc_nl_node_set_key net/tipc/node.c:2971 [inline]
 tipc_nl_node_set_key+0x9bf/0x13b0 net/tipc/node.c:3023
 genl_family_rcv_msg_doit net/netlink/genetlink.c:739 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
 genl_rcv_msg+0x1319/0x1610 net/netlink/genetlink.c:800
 netlink_rcv_skb+0x6fa/0x810 net/netlink/af_netlink.c:2494
 genl_rcv+0x63/0x80 net/netlink/genetlink.c:811
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x11d6/0x14a0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x1740/0x1840 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 ____sys_sendmsg+0xcfc/0x12f0 net/socket.c:2345
 ___sys_sendmsg net/socket.c:2399 [inline]
 __sys_sendmsg+0x714/0x830 net/socket.c:2432
 __compat_sys_sendmsg net/compat.c:347 [inline]
 __do_compat_sys_sendmsg net/compat.c:354 [inline]
 __se_compat_sys_sendmsg+0xa7/0xc0 net/compat.c:351
 __ia32_compat_sys_sendmsg+0x4a/0x70 net/compat.c:351
 do_syscall_32_irqs_on arch/x86/entry/common.c:79 [inline]
 __do_fast_syscall_32+0x102/0x160 arch/x86/entry/common.c:141
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:166
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:209
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
RIP: 0023:0xf7f60549
Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f555a5fc EFLAGS: 00000296 ORIG_RAX: 0000000000000172
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000200
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
 kmsan_internal_poison_shadow+0x5c/0xf0 mm/kmsan/kmsan.c:104
 kmsan_slab_alloc+0x8d/0xe0 mm/kmsan/kmsan_hooks.c:76
 slab_alloc_node mm/slub.c:2907 [inline]
 __kmalloc_node_track_caller+0xa37/0x1430 mm/slub.c:4527
 __kmalloc_reserve net/core/skbuff.c:142 [inline]
 __alloc_skb+0x2f8/0xb30 net/core/skbuff.c:210
 alloc_skb include/linux/skbuff.h:1099 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline]
 netlink_sendmsg+0xdbc/0x1840 net/netlink/af_netlink.c:1894
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 ____sys_sendmsg+0xcfc/0x12f0 net/socket.c:2345
 ___sys_sendmsg net/socket.c:2399 [inline]
 __sys_sendmsg+0x714/0x830 net/socket.c:2432
 __compat_sys_sendmsg net/compat.c:347 [inline]
 __do_compat_sys_sendmsg net/compat.c:354 [inline]
 __se_compat_sys_sendmsg+0xa7/0xc0 net/compat.c:351
 __ia32_compat_sys_sendmsg+0x4a/0x70 net/compat.c:351
 do_syscall_32_irqs_on arch/x86/entry/common.c:79 [inline]
 __do_fast_syscall_32+0x102/0x160 arch/x86/entry/common.c:141
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:166
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:209
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Fixes: e1f32190 ("tipc: add support for AEAD key setting via netlink")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Tuong Lien <tuong.t.lien@dektech.com.au>
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

flow_dissector_key_icmp::id is of type u16 (CPU byteorder),
ICMP header has its ID field in network byteorder obviously.
Sparse says:

net/core/flow_dissector.c:178:43: warning: restricted __be16 degrades to integer

Convert ID value to CPU byteorder when storing it into
flow_dissector_key_icmp.

Fixes: 5dec597e ("flow_dissector: extract more ICMP information")
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct sockaddr_qrtr has a 2-byte hole, and qrtr_recvmsg() currently
does not clear it before copying kernel data to user space.

It might be too late to name the hole since sockaddr_qrtr structure is uapi.

BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249
CPU: 0 PID: 29705 Comm: syz-executor.3 Not tainted 5.11.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:120
 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
 kmsan_internal_check_memory+0x202/0x520 mm/kmsan/kmsan.c:402
 kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 _copy_to_user+0x1ac/0x270 lib/usercopy.c:33
 copy_to_user include/linux/uaccess.h:209 [inline]
 move_addr_to_user+0x3a2/0x640 net/socket.c:237
 ____sys_recvmsg+0x696/0xd50 net/socket.c:2575
 ___sys_recvmsg net/socket.c:2610 [inline]
 do_recvmmsg+0xa97/0x22d0 net/socket.c:2710
 __sys_recvmmsg net/socket.c:2789 [inline]
 __do_sys_recvmmsg net/socket.c:2812 [inline]
 __se_sys_recvmmsg+0x24a/0x410 net/socket.c:2805
 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2805
 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x465f69
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f43659d6188 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 0000000000465f69
RDX: 0000000000000008 RSI: 0000000020003e40 RDI: 0000000000000003
RBP: 00000000004bfa8f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000010060 R11: 0000000000000246 R12: 000000000056bf60
R13: 0000000000a9fb1f R14: 00007f43659d6300 R15: 0000000000022000

Local variable ----addr@____sys_recvmsg created at:
 ____sys_recvmsg+0x168/0xd50 net/socket.c:2550
 ____sys_recvmsg+0x168/0xd50 net/socket.c:2550

Bytes 2-3 of 12 are uninitialized
Memory access of size 12 starts at ffff88817c627b40
Data copied to user address 0000000020000140

Fixes: bdabad3e ("net: Add Qualcomm IPC router")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MPTCP_PUSH_PENDING define is 6 and these tests should be testing if
BIT(6) is set.

Fixes: c2e6048f ("mptcp: fix race in release_cb")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

htb_init may fail to do the offload if it's not supported or if a
runtime error happens when allocating direct qdiscs. In those cases
TC_HTB_CREATE command is not sent to the driver, however, htb_destroy
gets called anyway and attempts to send TC_HTB_DESTROY.

It shouldn't happen, because the driver didn't receive TC_HTB_CREATE,
and also because the driver may not support ndo_setup_tc at all, while
q->offload is true, and htb_destroy mistakenly thinks the offload is
supported. Trying to call ndo_setup_tc in the latter case will lead to a
NULL pointer dereference.

This commit fixes the issues with htb_destroy by deferring assignment of
q->offload until after the TC_HTB_CREATE command. The necessary cleanup
of the offload entities is already done in htb_init.

Reported-by: syzbot+b53a709f04722ca12a3c@syzkaller.appspotmail.com
Fixes: d03b195b ("sch_htb: Hierarchical QoS hardware offload")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

htb_select_queue assumes it's always the offload mode, and it ends up in
calling ndo_setup_tc without any checks. It may lead to a NULL pointer
dereference if ndo_setup_tc is not implemented, or to an error returned
from the driver, which will prevent attaching qdiscs to HTB classes in
the non-offload mode.

This commit fixes the bug by adding the missing check to
htb_select_queue. In the non-offload mode it will return sch->dev_queue,
mimicking tc_modify_qdisc's behavior for the case where select_queue is
not implemented.

Reported-by: syzbot+b53a709f04722ca12a3c@syzkaller.appspotmail.com
Fixes: d03b195b ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce the new function tw_prot_init (inspired by
req_prot_init) to simplify "proto_register" function.

tw_prot_cleanup will take care of a partially initialized
timewait_sock_ops.
Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

iproute2 package is well behaved, but malicious user space can
provide illegal shift values and trigger UBSAN reports.

Add stab parameter to red_check_params() to validate user input.

syzbot reported:

UBSAN: shift-out-of-bounds in ./include/net/red.h:312:18
shift exponent 111 is too large for 64-bit type 'long unsigned int'
CPU: 1 PID: 14662 Comm: syz-executor.3 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x141/0x1d7 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
 red_calc_qavg_from_idle_time include/net/red.h:312 [inline]
 red_calc_qavg include/net/red.h:353 [inline]
 choke_enqueue.cold+0x18/0x3dd net/sched/sch_choke.c:221
 __dev_xmit_skb net/core/dev.c:3837 [inline]
 __dev_queue_xmit+0x1943/0x2e00 net/core/dev.c:4150
 neigh_hh_output include/net/neighbour.h:499 [inline]
 neigh_output include/net/neighbour.h:508 [inline]
 ip6_finish_output2+0x911/0x1700 net/ipv6/ip6_output.c:117
 __ip6_finish_output net/ipv6/ip6_output.c:182 [inline]
 __ip6_finish_output+0x4c1/0xe10 net/ipv6/ip6_output.c:161
 ip6_finish_output+0x35/0x200 net/ipv6/ip6_output.c:192
 NF_HOOK_COND include/linux/netfilter.h:290 [inline]
 ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:215
 dst_output include/net/dst.h:448 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 NF_HOOK include/linux/netfilter.h:295 [inline]
 ip6_xmit+0x127e/0x1eb0 net/ipv6/ip6_output.c:320
 inet6_csk_xmit+0x358/0x630 net/ipv6/inet6_connection_sock.c:135
 dccp_transmit_skb+0x973/0x12c0 net/dccp/output.c:138
 dccp_send_reset+0x21b/0x2b0 net/dccp/output.c:535
 dccp_finish_passive_close net/dccp/proto.c:123 [inline]
 dccp_finish_passive_close+0xed/0x140 net/dccp/proto.c:118
 dccp_terminate_connection net/dccp/proto.c:958 [inline]
 dccp_close+0xb3c/0xe60 net/dccp/proto.c:1028
 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431
 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:478
 __sock_release+0xcd/0x280 net/socket.c:599
 sock_close+0x18/0x20 net/socket.c:1258
 __fput+0x288/0x920 fs/file_table.c:280
 task_work_run+0xdd/0x1a0 kernel/task_work.c:140
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]

Fixes: 8afa10cb ("net_sched: red: Avoid illegal values")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the rare case that drop_monitor fails to register its probe on the
'napi_poll' tracepoint, it will not deactivate its hysteresis timer as
part of the error path. If the hysteresis timer was armed by the shortly
lived 'kfree_skb' probe and user space retries to initiate tracing, a
warning will be emitted for trying to initialize an active object [1].

Fix this by properly undoing all the operations that were done prior to
probe registration, in both software and hardware code paths.

Note that syzkaller managed to fail probe registration by injecting a
slab allocation failure [2].

[1]
ODEBUG: init active (active state 0) object type: timer_list hint: sched_send_work+0x0/0x60 include/linux/list.h:135
WARNING: CPU: 1 PID: 8649 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 1 PID: 8649 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
[...]
Call Trace:
 __debug_object_init+0x524/0xd10 lib/debugobjects.c:588
 debug_timer_init kernel/time/timer.c:722 [inline]
 debug_init kernel/time/timer.c:770 [inline]
 init_timer_key+0x2d/0x340 kernel/time/timer.c:814
 net_dm_trace_on_set net/core/drop_monitor.c:1111 [inline]
 set_all_monitor_traces net/core/drop_monitor.c:1188 [inline]
 net_dm_monitor_start net/core/drop_monitor.c:1295 [inline]
 net_dm_cmd_trace+0x720/0x1220 net/core/drop_monitor.c:1339
 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739
 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
 genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2348
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2402
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2435
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

[2]
 FAULT_INJECTION: forcing a failure.
 name failslab, interval 1, probability 0, space 0, times 1
 CPU: 1 PID: 8645 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
 Call Trace:
  dump_stack+0xfa/0x151
  should_fail.cold+0x5/0xa
  should_failslab+0x5/0x10
  __kmalloc+0x72/0x3f0
  tracepoint_add_func+0x378/0x990
  tracepoint_probe_register+0x9c/0xe0
  net_dm_cmd_trace+0x7fc/0x1220
  genl_family_rcv_msg_doit+0x228/0x320
  genl_rcv_msg+0x328/0x580
  netlink_rcv_skb+0x153/0x420
  genl_rcv+0x24/0x40
  netlink_unicast+0x533/0x7d0
  netlink_sendmsg+0x856/0xd90
  sock_sendmsg+0xcf/0x120
  ____sys_sendmsg+0x6e8/0x810
  ___sys_sendmsg+0xf3/0x170
  __sys_sendmsg+0xe5/0x1b0
  do_syscall_64+0x2d/0x70
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 70c69274 ("drop_monitor: Initialize timer and work item upon tracing enable")
Fixes: 8ee2267a ("drop_monitor: Convert to using devlink tracepoint")
Reported-by: syzbot+779559d6503f3a56213d@syzkaller.appspotmail.com
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Syzbot reported the suspecious RCU usage in nexthop_fib6_nh() when
called from ipv6_route_seq_show(). The reason is ipv6_route_seq_start()
calls rcu_read_lock_bh(), while nexthop_fib6_nh() calls
rcu_dereference_rtnl().
The fix proposed is to add a variant of nexthop_fib6_nh() to use
rcu_dereference_bh_rtnl() for ipv6_route_seq_show().

The reported trace is as follows:
./include/net/nexthop.h:416 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by syz-executor.0/17895:
     at: seq_read+0x71/0x12a0 fs/seq_file.c:169
     at: seq_file_net include/linux/seq_file_net.h:19 [inline]
     at: ipv6_route_seq_start+0xaf/0x300 net/ipv6/ip6_fib.c:2616

stack backtrace:
CPU: 1 PID: 17895 Comm: syz-executor.0 Not tainted 4.15.0-syzkaller #0
Call Trace:
 [<ffffffff849edf9e>] __dump_stack lib/dump_stack.c:17 [inline]
 [<ffffffff849edf9e>] dump_stack+0xd8/0x147 lib/dump_stack.c:53
 [<ffffffff8480b7fa>] lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5745
 [<ffffffff8459ada6>] nexthop_fib6_nh include/net/nexthop.h:416 [inline]
 [<ffffffff8459ada6>] ipv6_route_native_seq_show net/ipv6/ip6_fib.c:2488 [inline]
 [<ffffffff8459ada6>] ipv6_route_seq_show+0x436/0x7a0 net/ipv6/ip6_fib.c:2673
 [<ffffffff81c556df>] seq_read+0xccf/0x12a0 fs/seq_file.c:276
 [<ffffffff81dbc62c>] proc_reg_read+0x10c/0x1d0 fs/proc/inode.c:231
 [<ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:714 [inline]
 [<ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:701 [inline]
 [<ffffffff81bc28ae>] do_iter_read+0x49e/0x660 fs/read_write.c:935
 [<ffffffff81bc81ab>] vfs_readv+0xfb/0x170 fs/read_write.c:997
 [<ffffffff81c88847>] kernel_readv fs/splice.c:361 [inline]
 [<ffffffff81c88847>] default_file_splice_read+0x487/0x9c0 fs/splice.c:416
 [<ffffffff81c86189>] do_splice_to+0x129/0x190 fs/splice.c:879
 [<ffffffff81c86f66>] splice_direct_to_actor+0x256/0x890 fs/splice.c:951
 [<ffffffff81c8777d>] do_splice_direct+0x1dd/0x2b0 fs/splice.c:1060
 [<ffffffff81bc4747>] do_sendfile+0x597/0xce0 fs/read_write.c:1459
 [<ffffffff81bca205>] SYSC_sendfile64 fs/read_write.c:1520 [inline]
 [<ffffffff81bca205>] SyS_sendfile64+0x155/0x170 fs/read_write.c:1506
 [<ffffffff81015fcf>] do_syscall_64+0x1ff/0x310 arch/x86/entry/common.c:305
 [<ffffffff84a00076>] entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: f88d8ea6 ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NWei Wang <weiwan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I ran into a crash where setting up a ip6ip6 tunnel device which was /not/
set to collect_md mode was receiving collect_md populated skbs for xmit.

The BPF prog was populating the skb via bpf_skb_set_tunnel_key() which is
assigning special metadata dst entry and then redirecting the skb to the
device, taking ip6_tnl_start_xmit() -> ipxip6_tnl_xmit() -> ip6_tnl_xmit()
and in the latter it performs a neigh lookup based on skb_dst(skb) where
we trigger a NULL pointer dereference on dst->ops->neigh_lookup() since
the md_dst_ops do not populate neigh_lookup callback with a fake handler.

Transform the md_dst_ops into generic dst_blackhole_ops that can also be
reused elsewhere when needed, and use them for the metadata dst entries as
callback ops.

Also, remove the dst_md_discard{,_out}() ops and rely on dst_discard{,_out}()
from dst_init() which free the skb the same way modulo the splat. Given we
will be able to recover just fine from there, avoid any potential splats
iff this gets ever triggered in future (or worse, panic on warns when set).

Fixes: f38a9eb1 ("dst: Metadata destinations")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move generic blackhole dst ops to the core and use them from both
ipv4_dst_blackhole_ops and ip6_dst_blackhole_ops where possible. No
functional change otherwise. We need these also in other locations
and having to define them over and over again is not great.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: NBalazs Nemeth <bnemeth@redhat.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.

Fixes: 194ccc88 ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: NTOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in current Linux, MPTCP peers advertising endpoints with port numbers use
a sub-option length that wrongly accounts for the trailing TCP NOP. Also,
receivers will only process incoming ADD_ADDR with port having such wrong
sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 §3.4.1.

this can be verified running tcpdump on the kselftests artifacts:

 unpatched kernel:
 [root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr
 reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
 IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val 214459678 ecr 521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0
 IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 521312852 ecr 214459678,mptcp add-addr[bad opt]]

 patched kernel:
 [root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr
 reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
 IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val 3728873902 ecr 2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0
 IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 2732713195 ecr 3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0

Fixes: 22fb85ff ("mptcp: add port support for ADD_ADDR suboption writing")
CC: stable@vger.kernel.org # 5.11+
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Acked-and-tested-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The FIB lookup example[1] show how the IP-header field tot_len
(iph->tot_len) is used as input to perform the MTU check.

This patch extend the BPF-helper bpf_check_mtu() with the same ability
to provide the length as user parameter input, via mtu_len parameter.

This still needs to be done before the bpf_check_mtu() helper API
becomes frozen.

  [1] samples/bpf/xdp_fwd_kern.c

Fixes: 34b2021c ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161521555850.3515614.6533850861569774444.stgit@firesoul

Tobias reports that after the blamed patch, VLAN objects being added to
a bridge device are being added to all slave ports instead (swp2, swp3).

ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp3 master br0
bridge vlan add dev br0 vid 100 self

This is because the fix was too broad: we made dsa_port_offloads_netdev
say "yes, I offload the br0 bridge" for all slave ports, but we didn't
add the checks whether the switchdev object was in fact meant for the
physical port or for the bridge itself. So we are reacting on events in
a way in which we shouldn't.

The reason why the fix was too broad is because the question itself,
"does this DSA port offload this netdev", was too broad in the first
place. The solution is to disambiguate the question and separate it into
two different functions, one to be called for each switchdev attribute /
object that has an orig_dev == net_bridge (dsa_port_offloads_bridge),
and the other for orig_dev == net_bridge_port (*_offloads_bridge_port).

In the case of VLAN objects on the bridge interface, this solves the
problem because we know that VLAN objects are per bridge port and not
per bridge. And when orig_dev is equal to the net_bridge, we offload it
as a bridge, but not as a bridge port; that's how we are able to skip
reacting on those events. Note that this is compatible with future plans
to have explicit offloading of VLAN objects on the bridge interface as a
bridge port (in DSA, this signifies that we should add that VLAN towards
the CPU port).

Fixes: 99b8202b ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored")
Reported-by: NTobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NTobias Waldekranz <tobias@waldekranz.com>
Tested-by: NTobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to use put_unaligned when writing 32-bit DOI value
in cipso_v4_gentag_hdr to avoid unaligned memory access.

v2: unneeded type cast removed as Ondrej Mosnacek suggested.
Signed-off-by: NSergey Nazarov <s-nazarov@yandex.ru>
Acked-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current CIPSO and CALIPSO refcounting scheme for the DOI
definitions is a bit flawed in that we:

1. Don't correctly match gets/puts in netlbl_cipsov4_list().
2. Decrement the refcount on each attempt to remove the DOI from the
   DOI list, only removing it from the list once the refcount drops
   to zero.

This patch fixes these problems by adding the missing "puts" to
netlbl_cipsov4_list() and introduces a more conventional, i.e.
not-buggy, refcounting mechanism to the DOI definitions.  Upon the
addition of a DOI to the DOI list, it is initialized with a refcount
of one, removing a DOI from the list removes it from the list and
drops the refcount by one; "gets" and "puts" behave as expected with
respect to refcounts, increasing and decreasing the DOI's refcount by
one.

Fixes: b1edeb10 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
Fixes: d7cce015 ("netlabel: Add support for removing a CALIPSO DOI.")
Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com
Signed-off-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the port number is mismatched with the announced ones, use
'goto dispose_child' to free the resources instead of using 'goto out'.

This patch also moves the port number checking code in
subflow_syn_recv_sock before mptcp_finish_join, otherwise subflow_drop_ctx
will fail in dispose_child.

Fixes: 5bc56388 ("mptcp: add port number check for MP_JOIN")
Reported-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__mptcp_clean_una() can free write memory and should wake-up
user-space processes when needed.

When such function is invoked by the MPTCP receive path, the wakeup
is not needed, as the TCP stack will later trigger subflow_write_space
which will do the wakeup as needed.

Other __mptcp_clean_una() call sites need an additional wakeup check
Let's bundle the relevant code in a new helper and use it.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/165
Fixes: 6e628cd3 ("mptcp: use mptcp release_cb for delayed tasks")
Fixes: 64b9cea7 ("mptcp: fix spurious retransmissions")
Tested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we receive a MPTCP_PUSH_PENDING even from a subflow when
mptcp_release_cb() is serving the previous one, the latter
will be delayed up to the next release_sock(msk).

Address the issue implementing a test/serve loop for such
event.

Additionally rename the push helper to __mptcp_push_pending()
to be more consistent with the existing code.

Fixes: 6e628cd3 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Will simplify the following patch, no functional change
intended.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just like with last_snd, we have to NULL 'first' on subflow close.

ack_hint isn't strictly required (its never dereferenced), but better to
clear this explicitly as well instead of making it an exception.

msk->first is dereferenced unconditionally at accept time, but
at that point the ssk is not on the conn_list yet -- this means
worker can't see it when iterating the conn_list.
Reported-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>