- 02 2月, 2008 40 次提交
-
-
由 Ivan Kokshaysky 提交于
Check that the e100 is in the D0 power state. If it's not, it won't respond to MMIO accesses and we end up with master-abort machine checks on some platforms. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
A HOWTO that hasn't been updated for half a dozen years no longer "contains valuable information about which PCI hardware does work under Linux and which doesn't". Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch fixes the following problem present with older gcc versions: <-- snip --> ... CC drivers/pci/msi.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:692: warning: weak declaration of `arch_msi_check_device' after first use results in unspecified behavior /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:704: warning: weak declaration of `arch_setup_msi_irqs' after first use results in unspecified behavior /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:724: warning: weak declaration of `arch_teardown_msi_irqs' after first use results in unspecified behavior ... <-- snip --> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sebastien Dugue 提交于
Add a quirk to enable the MSI mapping capability on HyperTransport bridges. Wire Broadcom's HT1000 to use the quirk. Signed-off-by: NSebastien Dugue <sebastien.dugue@bull.net> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Currid <acurrid@nvidia.com> Cc: Peer Chen <pchen@nvidia.com> Cc: Prakash Punnoor <prakash@punnoor.de> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: NMichael Chan <mchan@broadcom.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Currid <acurrid@nvidia.com> Cc: Peer Chen <pchen@nvidia.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benjamin Herrenschmidt 提交于
This adds appropriate casts to avoid a warning and print the correct values in pr_debug. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benjamin Herrenschmidt 提交于
The current pci_assign_unassigned_resources() code doesn't work properly on 32 bits platforms with 64 bits resources. The main reason is the use of unsigned long in various places instead of resource_size_t. This is a pre-requisite for making powerpc use the generic code instead of its own half-useful implementation. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rolf Eike Beer 提交于
PCIeHP: Fix some whitespace damage Signed-off-by: NRolf Eike Beer <eike-hotplug@sf-tec.de> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kenji Kaneshige 提交于
Remove duplicated code to find an extend capability in PCIEHP driver. Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kenji Kaneshige 提交于
Remove needless hp_slot calculation. This has no functional changes. Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kenji Kaneshige 提交于
Remove needless members from struct controller. This has no functional changes. Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 MUNEDA Takahiro 提交于
acpi_get_name() is called before and after dbg(). The latter is useless and should be removed. Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 MUNEDA Takahiro 提交于
fix trivial typos. Signed-off-by: NMUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Lord 提交于
Earlier patches to split out the hardware init for PCIe hotplug resulted in some one-time initializations being redone on every resume cycle. Eg. irq/polling initialization. This patch splits the hardware init into two parts, and separates the one-time initializations from those so that they only ever get done once, as intended. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Lord 提交于
Make use of the previously split out pcie_init_enable_events() function to reinitialize the hotplug hardware on resume from suspend, but only when pciehp_force==1. Otherwise behaviour is unmodified. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Lord 提交于
PCI: more fixes for PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1 Split out the hotplug hardware initialization code from pcie_init() into pcie_init_enable_events(), without changing any functionality. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Lord 提交于
PCIE: fix PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1. Fix pciehp_probe() to deal with ExpressCard cards that were inserted prior to the driver being loaded. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linas Vepstas 提交于
PCI error recovery usually involves the PCI adapter being reset. If the device is using MSI, the reset will cause the MSI state to be lost; the device driver needs to restore the MSI state. The pci_restore_msi_state() routine is currently protected by CONFIG_PM; remove this, and also export the symbol, so that it can be used in a modle. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linas Vepstas 提交于
Fix presentation of the slot number in the /sys/bus/pci/slots directory to match that used in the majority of other drivers. > Greg said: > How is anyone supposed to write sane managability tools in the > presence > of such anarchy? > > > ~ # cat /sys/bus/pci/slots/0000:00:02.2/phy_location > > U787A.001.DNZ00Z5-P1-C2 > > Right. This should look like: > > # cat /sys/bus/pci/slots/U787A.001.DNZ00Z5-P1-C2/address > 0000:00:02 This patch implements exactly what you describe. Boot tested. I assume you really mean it -- if so, then please review and ack the patch !? I have absolutely no clue if this breaks any existing IBM tools. I'm pretty sure it doesn't ... but attention Mike Strosaker! does it? Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: <strosake@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Unhide the SMBus on the HP xw4100. This gives access to a hardware monitoring chip (ADT7463) and to the memory module SPD EEPROMs. I checked that ACPI wasn't accessing the SMBus, so it should be safe. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Fenghua Yu 提交于
Add and changes a few sanity checks in dmar.c. 1. The haw field in ACPI DMAR table in VT-d spec doesn't describe the range of haw. But since DMA page size is 4KB in DMA remapping, haw should be at least 4KB. The current VT-d code in dmar.c returns failure when haw==0. This sanity check is not accurate and execution can pass when haw is less than one page size 4KB. This patch changes the haw sanity check to validate if haw is less than 4KB. 2. Add dmar_rmrr_units verification. 3. Add parse_dmar_table() verification. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> Acked-by: Nmark gross <mgross@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
Remove lots of space-before-) instances. Perhaps these were a workaround for problems in some long-dead cpp version. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
There's already a prototype for pci_scan_child_bus() at the correct place in pci.h, so there's no reason for an additional one. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch fixes the following build error with CONFIG_HOTPLUG=n: MODPOST 2137 modules ERROR: "pci_scan_single_device" [drivers/edac/i82875p_edac.ko] undefined! Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NDoug Thompson <norsk5@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Diego Woitasen 提交于
sys_pciconfig_{read,write}() are protected against PCI removal with the reference count in struct pci_dev. The concurrency of pci_user_{read,write}_config_* functions are already protected by pci_lock in drivers/pci/access.c. Signed-off-by: NDiego Woitasen <diego@woitasen.com.ar> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lennert Buytenhek 提交于
The vendor_compatible and device_compatible fields in struct pci_dev aren't used anywhere, and are somewhat pointless. Assuming that these are historical artifacts, remove them. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lee Schermerhorn 提交于
In an attempt to ensure memory allocation from the local node, the pci driver temporarily replaces the current task's memory policy with the system default policy. Trying to be a good citizen, the driver then call's mpol_get() on the new policy. When it's finished probing, it undoes the '_get by calling mpol_free() [on the system default policy] and then restores the current task's saved mempolicy. A couple of issues here: 1) it's never necessary to set a task's mempolicy to the system default policy in order to get system default allocation behavior. Simply set the current task's mempolicy to NULL and allocations will fall back to system default policy. 2) we should never [need to] call mpol_free() on the system default policy. [I plan on trapping this with a VM_BUG_ON() in a subsequent patch.] This patch removes the calls to mpol_get() and mpol_free() and uses NULL for the temporary task mempolicy to effect default allocation behavior. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Acked-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tim Yamin 提交于
PCI Bus Parking and PCI Master read caching on the VIA CX700 is buggy and can lead to problems such as USB2.0 packet loss if a VT6212L controller is on the PCI bus. It's disabled by default, but some BIOSes turn these features on and this patch reverts the configuration to the safe defaults. Signed-off-by: NTim Yamin <tim.yamin@zonbu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Auke Kok 提交于
Don't read the revision ID unnecessary since the PCI subsystem fills this field in already. Updated to fix a thinko bug in a previously sent patch. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
Currently, fakephp will claim all devices; we really only want it to claim those not in slots. Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
Remove superfluous space. Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Chiang 提交于
Remove unused variable from acpiphp. Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kristen Carlson Accardi 提交于
Remove EXPERIMENTAL from PCI Hot Plug. Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joonwoo Park 提交于
Thank you so much for your check & advise. This time, I've tried on ibmphp_core.c, is it OK? Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Shaohua Li 提交于
PCIE has a mechanism to wait for Non-Posted request to complete. I think pci_disable_device is a good place to do this. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Shaohua Li 提交于
Native PME is capability of root port or root complex event collector. It's not determined by PCI PME capability. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch removes the following unused exports: - remove the following unused EXPORT_SYMBOL's: - pci-acpi.c: pci_osc_support_set - proc.c: pci_proc_detach_bus - remove the following unused EXPORT_SYMBOL_GPL's: - bus.c: pci_walk_bus - probe.c: pci_create_bus - setup-res.c: pci_claim_resource Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch #if 0's the following unused global functions: - rom.c: pci_map_rom_copy() - rom.c: pci_remove_rom() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global pci_restore_bars() static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-