Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.

A user space tool, like kexec-tools, is responsible for allocating
a separate region for the core's ELF header within crash kdump kernel
memory and filling it in when executing kexec_load().

Then, its location will be advertised to crash dump kernel via a new
device-tree property, "linux,elfcorehdr", and crash dump kernel preserves
the region for later use with reserve_elfcorehdr() at boot time.

On crash dump kernel, /proc/vmcore will access the primary kernel's memory
with copy_oldmem_page(), which feeds the data page-by-page by ioremap'ing
it since it does not reside in linear mapping on crash dump kernel.

Meanwhile, elfcorehdr_read() is simple as the region is always mapped.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NJames Morse <james.morse@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In addition to common VMCOREINFO's defined in
crash_save_vmcoreinfo_init(), we need to know, for crash utility,
  - kimage_voffset
  - PHYS_OFFSET
to examine the contents of a dump file (/proc/vmcore) correctly
due to the introduction of KASLR (CONFIG_RANDOMIZE_BASE) in v4.6.

  - VA_BITS
is also required for makedumpfile command.

arch_crash_save_vmcoreinfo() appends them to the dump file.
More VMCOREINFO's may be added later.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NJames Morse <james.morse@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Primary kernel calls machine_crash_shutdown() to shut down non-boot cpus
and save registers' status in per-cpu ELF notes before starting crash
dump kernel. See kernel_kexec().
Even if not all secondary cpus have shut down, we do kdump anyway.

As we don't have to make non-boot(crashed) cpus offline (to preserve
correct status of cpus at crash dump) before shutting down, this patch
also adds a variant of smp_send_stop().
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NJames Morse <james.morse@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since arch_kexec_protect_crashkres() removes a mapping for crash dump
kernel image, the loaded data won't be preserved around hibernation.

In this patch, helper functions, crash_prepare_suspend()/
crash_post_resume(), are additionally called before/after hibernation so
that the relevant memory segments will be mapped again and preserved just
as the others are.

In addition, to minimize the size of hibernation image, crash_is_nosave()
is added to pfn_is_nosave() in order to recognize only the pages that hold
loaded crash dump kernel image as saveable. Hibernation excludes any pages
that are marked as Reserved and yet "nosave."
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

arch_kexec_protect_crashkres() and arch_kexec_unprotect_crashkres()
are meant to be called by kexec_load() in order to protect the memory
allocated for crash dump kernel once the image is loaded.

The protection is implemented by unmapping the relevant segments in crash
dump kernel memory, rather than making it read-only as other archs do,
to prevent coherency issues due to potential cache aliasing (with
mismatched attributes).

Page-level mappings are consistently used here so that we can change
the attributes of segments in page granularity as well as shrink the region
also in page granularity through /sys/kernel/kexec_crash_size, putting
the freed memory back to buddy system.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This function validates and invalidates PTE entries, and will be utilized
in kdump to protect loaded crash dump kernel image.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

"crashkernel=" kernel parameter specifies the size (and optionally
the start address) of the system ram to be used by crash dump kernel.
reserve_crashkernel() will allocate and reserve that memory at boot time
of primary kernel.

The memory range will be exposed to userspace as a resource named
"Crash kernel" in /proc/iomem.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NPratyush Anand <panand@redhat.com>
Reviewed-by: NJames Morse <james.morse@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Crash dump kernel uses only a limited range of available memory as System
RAM. On arm64 kdump, This memory range is advertised to crash dump kernel
via a device-tree property under /chosen,
   linux,usable-memory-range = <BASE SIZE>

Crash dump kernel reads this property at boot time and calls
memblock_cap_memory_range() to limit usable memory which are listed either
in UEFI memory map table or "memory" nodes of a device tree blob.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NGeoff Levand <geoff@infradead.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

To prevent unintended modifications to the kernel text (malicious or
otherwise) while running the EFI stub, describe the kernel image as
two separate sections: a .text section with read-execute permissions,
covering .text, .rodata and .init.text, and a .data section with
read-write permissions, covering .init.data, .data and .bss.

This relies on the firmware to actually take the section permission
flags into account, but this is something that is currently being
implemented in EDK2, which means we will likely start seeing it in
the wild between one and two years from now.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Replace open coded constants with symbolic ones throughout the
Image and the EFI headers. No binary level changes are intended.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The kernel's EFI PE/COFF header contains a dummy .reloc section, and
an explanatory comment that claims that this is required for the EFI
application loader to accept the Image as a relocatable image (i.e.,
one that can be loaded at any offset and fixed up in place)

This was inherited from the x86 implementation, which has elaborate host
tooling to mangle the PE/COFF header post-link time, and which populates
the .reloc section with a single dummy base relocation. On ARM, no such
tooling exists, and the .reloc section remains empty, and is never even
exposed via the BaseRelocationTable directory entry, which is where the
PE/COFF loader looks for it.

The PE/COFF spec is unclear about relocatable images that do not require
any fixups, but the EDK2 implementation, which is the de facto reference
for PE/COFF in the UEFI space, clearly does not care, and explicitly
mentions (in a comment) that relocatable images with no base relocations
are perfectly fine, as long as they don't have the RELOCS_STRIPPED
attribute set (which is not the case for our PE/COFF image)

So simply remove the .reloc section altogether.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NPeter Jones <pjones@redhat.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Bring the PE/COFF header in line with the PE/COFF spec, by setting
NumberOfSymbols to 0, and removing the section alignment flags.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

After having split off the PE header, clean up the bits that remain:
use .long consistently, merge two adjacent #ifdef CONFIG_EFI blocks,
fix the offset of the PE header pointer and remove the redundant .align
that follows it.

Also, since we will be eliminating all open coded constants from the
EFI header in subsequent patches, let's replace the open coded "ARM\x64"
magic number with its .ascii equivalent.

No changes to the resulting binary image are intended.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In preparation of yet another round of modifications to the PE/COFF
header, macroize it and move the definition into a separate source
file.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This module tests the module loader's ELF relocation processing
routines. When loaded, it logs output like below.

    Relocation test:
    -------------------------------------------------------
    R_AARCH64_ABS64                 0xffff880000cccccc pass
    R_AARCH64_ABS32                 0x00000000f800cccc pass
    R_AARCH64_ABS16                 0x000000000000f8cc pass
    R_AARCH64_MOVW_SABS_Gn          0xffff880000cccccc pass
    R_AARCH64_MOVW_UABS_Gn          0xffff880000cccccc pass
    R_AARCH64_ADR_PREL_LO21         0xffffff9cf4d1a400 pass
    R_AARCH64_PREL64                0xffffff9cf4d1a400 pass
    R_AARCH64_PREL32                0xffffff9cf4d1a400 pass
    R_AARCH64_PREL16                0xffffff9cf4d1a400 pass
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

read_system_reg() can readily be confused with read_sysreg(),
whereas these are really quite different in their meaning.

This patches attempts to reduce the ambiguity be reserving "sysreg"
for the actual system register accessors.

read_system_reg() is instead renamed to read_sanitised_ftr_reg(),
to make it more obvious that the Linux-defined sanitised feature
register cache is being accessed here, not the underlying
architectural system registers.

cpufeature.c's internal __raw_read_system_reg() function is renamed
in line with its actual purpose: a form of read_sysreg() that
indexes on (non-compiletime-constant) encoding rather than symbolic
register name.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

There are two unnecessary newlines, one is in show_regs, another
is in __show_regs(), drop them.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This is the third attempt at enabling the use of contiguous hints for
kernel mappings. The most recent attempt 0bfc445d was reverted after
it turned out that updating permission attributes on live contiguous ranges
may result in TLB conflicts. So this time, the contiguous hint is not set
for .rodata or for the linear alias of .text/.rodata, both of which are
mapped read-write initially, and remapped read-only at a later stage.
(Note that the latter region could also be unmapped and remapped again
with updated permission attributes, given that the region, while live, is
only mapped for the convenience of the hibernation code, but that also
means the TLB footprint is negligible anyway, so why bother)

This enables the following contiguous range sizes for the virtual mapping
of the kernel image, and for the linear mapping:

          granule size |  cont PTE  |  cont PMD  |
          -------------+------------+------------+
               4 KB    |    64 KB   |   32 MB    |
              16 KB    |     2 MB   |    1 GB*   |
              64 KB    |     2 MB   |   16 GB*   |

* Only when built for 3 or more levels of translation. This is due to the
  fact that a 2 level configuration only consists of PGDs and PTEs, and the
  added complexity of dealing with folded PMDs is not justified considering
  that 16 GB contiguous ranges are likely to be ignored by the hardware (and
  16k/2 levels is a niche configuration)
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The routines __pud_populate and __pmd_populate only create a table
entry at their respective level which refers to the next level page
by its physical address, so there is no reason to map this page and
then unmap it immediately after.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In preparation of extending the policy for manipulating kernel mappings
with whether or not contiguous hints may be used in the page tables,
replace the bool 'page_mappings_only' with a flags field and a flag
NO_BLOCK_MAPPINGS.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

A mapping with the contiguous bit cannot be safely manipulated while
live, regardless of whether the bit changes between the old and new
mapping. So take this into account when deciding whether the change
is safe.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The debug_pagealloc facility manipulates kernel mappings in the linear
region at page granularity to detect out of bounds or use-after-free
accesses. Since the kernel segments are not allocated dynamically,
there is no point in taking the debug_pagealloc_enabled flag into
account for them, and we can use block mappings unconditionally.

Note that this applies equally to the linear alias of text/rodata:
we will never have dynamic allocations there given that the same
memory is statically in use by the kernel image.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Align the function prototype of alloc_init_pte() with its pmd and pud
counterparts by replacing the pfn parameter with the equivalent physical
address.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

To avoid having mappings that are writable and executable at the same
time, split the init region into a .init.text region that is mapped
read-only, and a .init.data region that is mapped non-executable.

This is possible now that the alternative patching occurs via the linear
mapping, and the linear alias of the init region is always mapped writable
(but never executable).

Since the alternatives descriptions themselves are read-only data, move
those into the .init.text region.
Reviewed-by: NLaura Abbott <labbott@redhat.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Now that alternatives patching code no longer relies on the primary
mapping of .text being writable, we can remove the code that removes
the writable permissions post-init time, and map it read-only from
the outset.

To preserve the existing behavior under rodata=off, which is relied
upon by external debuggers to manage software breakpoints (as pointed
out by Mark), add an early_param() check for rodata=, and use RWX
permissions if it set to 'off'.
Reviewed-by: NLaura Abbott <labbott@redhat.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

One important rule of thumb when desiging a secure software system is
that memory should never be writable and executable at the same time.
We mostly adhere to this rule in the kernel, except at boot time, when
regions may be mapped RWX until after we are done applying alternatives
or making other one-off changes.

For the alternative patching, we can improve the situation by applying
the fixups via the linear mapping, which is never mapped with executable
permissions. So map the linear alias of .text with RW- permissions
initially, and remove the write permissions as soon as alternative
patching has completed.
Reviewed-by: NLaura Abbott <labbott@redhat.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In preparation of refactoring the kernel mapping logic so that text regions
are never mapped writable, which would require adding explicit TLB
maintenance to new call sites of create_mapping_late() (which is currently
invoked twice from the same function), move the TLB maintenance from the
call site into create_mapping_late() itself, and change it from a full
TLB flush into a flush by VA, which is more appropriate here.

Also, given that create_mapping_late() has evolved into a routine that only
updates protection bits on existing mappings, rename it to
update_mapping_prot()
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This reverts commit 9c0e83c3, which
is no longer needed now that the modversions code plays nice with
relocatable PIE kernels.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We only need to initialise sctlr_el1 if we're installing an EL2 stub, so
we may as well defer this until we're doing so. Similarly, we can defer
intialising CPTR_EL2 until then, as we do not access any trapped
functionality as part of el2_setup.

This patch modified el2_setup accordingly, allowing us to remove a
branch and simplify the code flow.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The early el2_setup code is a little convoluted, with two branches where
one would do. This makes the code more painful to read than is
necessary.

We can remove a branch and simplify the logic by moving the early return
in the booted-at-EL1 case earlier in the function. This separates it
from all the setup logic that only makes sense for EL2.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Check if CONFIG_HAVE_HW_BREAKPOINT is enabled before compiling in extra
data required for hardware breakpoints. Compiling out this code when hw
breakpoints are disabled saves about 272 bytes per struct task_struct.
Signed-off-by: NChris Redmon <credmonster@gmail.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add support for allocating physically contiguous DMA buffers on arm64
systems with an IOMMU.  This can be useful when two or more devices
with different memory requirements are involved in buffer sharing.

Note that as this uses the CMA allocator, setting the
DMA_ATTR_FORCE_CONTIGUOUS attribute has a runtime-dependency on
CONFIG_DMA_CMA, just like on arm32.

For arm64 systems using swiotlb, no changes are needed to support the
allocation of physically contiguous DMA buffers:
  - swiotlb always uses physically contiguous buffers (up to
    IO_TLB_SEGSIZE = 128 pages),
  - arm64's __dma_alloc_coherent() already calls
    dma_alloc_from_contiguous() when CMA is available.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This mirrors commit e9c38ceb ("ARM: 8455/1: define __BUG as
asm(BUG_INSTR) without CONFIG_BUG") to make the behavior of
arm64 consistent with arm and x86, and avoids lots of warnings in
randconfig builds, such as:

kernel/seccomp.c: In function '__seccomp_filter':
kernel/seccomp.c:666:1: error: no return statement in function returning non-void [-Werror=return-type]
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

ARMv8.3 adds new instructions to support Release Consistent
processor consistent (RCpc) model, which is weaker than the
RCsc model.
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

ARM v8.3 adds support for new instructions to aid floating-point
multiplication and addition of complex numbers. Expose the support
via HWCAP and MRS emulation
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

ARMv8.3 adds support for a new instruction to perform conversion
from double precision floating point to integer  to match the
architected behaviour of the equivalent Javascript conversion.
Expose the availability via HWCAP and MRS emulation.
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

A VPIPT I-cache has two main properties:

1. Lines allocated into the cache are tagged by VMID and a lookup can
   only hit lines that were allocated with the current VMID.

2. I-cache invalidation from EL1/0 only invalidates lines that match the
   current VMID of the CPU doing the invalidation.

This can cause issues with non-VHE configurations, where the host runs
at EL1 and wants to invalidate I-cache entries for a guest running with
a different VMID. VHE is not affected, because the host runs at EL2 and
I-cache invalidation applies as expected.

This patch solves the problem by invalidating the I-cache when unmapping
a page at stage 2 on a system with a VPIPT I-cache but not running with
VHE enabled. Hopefully this is an obscure enough configuration that the
overhead isn't anything to worry about, although it does mean that the
by-range I-cache invalidation currently performed when mapping at stage
2 can be elided on such systems, because the I-cache will be clean for
the guest VMID following a rollover event.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add support for detecting VPIPT I-caches, as introduced by ARMv8.2.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

cachetype.h and cache.h are small and both obviously related to caches.
Merge them together to reduce clutter.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

As a recent change to ARMv8, ASID-tagged VIVT I-caches are removed
retrospectively from the architecture. Consequently, we don't need to
support them in Linux either.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>