- 20 2月, 2019 12 次提交
-
-
由 Christoffer Dall 提交于
Prepare for having 4 timer data structures (2 for now). Move loaded to the cpu data structure and not the individual timer structure, in preparation for assigning the EL1 phys timer as well. Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Andre Przywara 提交于
At the moment we have separate system register emulation handlers for each timer register. Actually they are quite similar, and we rely on kvm_arm_timer_[gs]et_reg() for the actual emulation anyways, so let's just merge all of those handlers into one function, which just marshalls the arguments and then hands off to a set of common accessors. This makes extending the emulation to include EL2 timers much easier. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> [Fixed 32-bit VM breakage and reduced to reworking existing code] Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com> [Fixed 32bit host, general cleanup] Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Marc Zyngier 提交于
Instead of having an open-coded macro, reuse the sys_reg() macro that does the exact same thing (the encoding is slightly different, but the ordering property is the same). Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
-
由 Marc Zyngier 提交于
We previously incorrectly named the define for this system register. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
-
由 Christoffer Dall 提交于
Instead of calling into kvm_timer_[un]schedule from the main kvm blocking path, test if the VCPU is on the wait queue from the load/put path and perform the background timer setup/cancel in this path. This has the distinct advantage that we no longer race between load/put and schedule/unschedule and programming and canceling of the bg_timer always happens when the timer state is not loaded. Note that we must now remove the checks in kvm_timer_blocking that do not schedule a background timer if one of the timers can fire, because we no longer have a guarantee that kvm_vcpu_check_block() will be called before kvm_timer_blocking. Reported-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
In preparation for nested virtualization where we are going to have more than a single VMID per VM, let's factor out the VMID data into a separate VMID data structure and change the VMID allocator to operate on this new structure instead of using a struct kvm. This also means that udate_vttbr now becomes update_vmid, and that the vttbr itself is generated on the fly based on the stage 2 page table base address and the vmid. We cache the physical address of the pgd when allocating the pgd to avoid doing the calculation on every entry to the guest and to avoid calling into potentially non-hyp-mapped code from hyp/EL2. If we wanted to merge the VMID allocator with the arm64 ASID allocator at some point in the future, it should actually become easier to do that after this patch. Note that to avoid mapping the kvm_vmid_bits variable into hyp, we simply forego the masking of the vmid value in kvm_get_vttbr and rely on update_vmid to always assign a valid vmid value (within the supported range). Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> [maz: minor cleanups] Reviewed-by: NJulien Thierry <julien.thierry@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Marc Zyngier 提交于
We currently eagerly save/restore MPIDR. It turns out to be slightly pointless: - On the host, this value is known as soon as we're scheduled on a physical CPU - In the guest, this value cannot change, as it is set by KVM (and this is a read-only register) The result of the above is that we can perfectly avoid the eager saving of MPIDR_EL1, and only keep the restore. We just have to setup the host contexts appropriately at boot time. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
-
由 Marc Zyngier 提交于
Just like on arm64, and for the same reasons, kvm_call_hyp removes any form of type safety when calling into HYP. But we can still try to tell the compiler what we're trying to achieve. Here, we can add code that would do the function call if it wasn't guarded by an always-false predicate. Hopefully, the compiler is dumb enough to do the type checking and clever enough to not emit the corresponding code... Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
-
由 Marc Zyngier 提交于
We now call VHE code directly, without going through any central dispatching function. Let's drop that code. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
-
由 Marc Zyngier 提交于
When running VHE, there is no need to jump via some stub to perform a "HYP" function call, as there is a single address space. Let's thus change kvm_call_hyp() and co to perform a direct call in this case. Although this results in a bit of code expansion, it allows the compiler to check for type compatibility, something that we are missing so far. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
-
由 Marc Zyngier 提交于
Until now, we haven't differentiated between HYP calls that have a return value and those who don't. As we're about to change this, introduce kvm_call_hyp_ret(), and change all call sites that actually make use of a return value. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
-
由 Andre Przywara 提交于
A host running in VHE mode gets the EL2 physical timer as its time source (accessed using the EL1 sysreg accessors, which get re-directed to the EL2 sysregs by VHE). The EL1 physical timer remains unused by the host kernel, allowing us to pass that on directly to a KVM guest and saves us from emulating this timer for the guest on VHE systems. Store the EL1 Physical Timer's IRQ number in struct arch_timer_kvm_info on VHE systems to allow KVM to use it. Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
-
- 21 1月, 2019 11 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull pstore fixes from Kees Cook: - Fix console ramoops to show the previous boot logs (Sai Prakash Ranjan) - Avoid allocation and leak of platform data * tag 'pstore-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Avoid allocation and leak of platform data pstore/ram: Fix console ramoops to show the previous boot logs
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull gcc-plugins fixes from Kees Cook: "Fix ARM per-task stack protector plugin under GCC 9 (Ard Biesheuvel)" * tag 'gcc-plugins-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: arm_ssp_per_task_plugin: fix for GCC 9+ gcc-plugins: arm_ssp_per_task_plugin: sign extend the SP mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...
-
由 Kees Cook 提交于
Yue Hu noticed that when parsing device tree the allocated platform data was never freed. Since it's not used beyond the function scope, this switches to using a stack variable instead. Reported-by: NYue Hu <huyue2@yulong.com> Fixes: 35da6094 ("pstore/ram: add Device Tree bindings") Cc: stable@vger.kernel.org Signed-off-by: NKees Cook <keescook@chromium.org>
-
由 Ard Biesheuvel 提交于
GCC 9 reworks the way the references to the stack canary are emitted, to prevent the value from being spilled to the stack before the final comparison in the epilogue, defeating the purpose, given that the spill slot is under control of the attacker that we are protecting ourselves from. Since our canary value address is obtained without accessing memory (as opposed to pre-v7 code that will obtain it from a literal pool), it is unlikely (although not guaranteed) that the compiler will spill the canary value in the same way, so let's just disable this improvement when building with GCC9+. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NKees Cook <keescook@chromium.org>
-
由 Ard Biesheuvel 提交于
The ARM per-task stack protector GCC plugin hits an assert in the compiler in some case, due to the fact the the SP mask expression is not sign-extended as it should be. So fix that. Suggested-by: NKugan Vivekanandarajah <kugan.vivekanandarajah@linaro.org> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NKees Cook <keescook@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio/vhost fixes and cleanups from Michael Tsirkin: "Fixes and cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/scsi: Use copy_to_iter() to send control queue response vhost: return EINVAL if iovecs size does not match the message size virtio-balloon: tweak config_changed implementation virtio: don't allocate vqs when names[i] = NULL virtio_pci: use queue idx instead of array idx to set up the vq virtio: document virtio_config_ops restrictions virtio: fix virtio_config_ops description
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from David Sterba: "A handful of fixes (some of them in testing for a long time): - fix some test failures regarding cleanup after transaction abort - revert of a patch that could cause a deadlock - delayed iput fixes, that can help in ENOSPC situation when there's low space and a lot data to write" * tag 'for-5.0-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: wakeup cleaner thread when adding delayed iput btrfs: run delayed iputs before committing btrfs: wait on ordered extents on abort cleanup btrfs: handle delayed ref head accounting cleanup in abort Revert "btrfs: balance dirty metadata pages in btrfs_finish_ordered_io"
-
由 Linus Torvalds 提交于
Merge tags 'compiler-attributes-for-linus-v5.0-rc3' and 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux Pull misc clang fixes from Miguel Ojeda: - A fix for OPTIMIZER_HIDE_VAR from Michael S Tsirkin - Update clang-format with the latest for_each macro list from Jason Gunthorpe * tag 'compiler-attributes-for-linus-v5.0-rc3' of git://github.com/ojeda/linux: include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR * tag 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux: clang-format: Update .clang-format with the latest for_each macro list
-
由 Florian La Roche 提交于
If an input number x for int_sqrt64() has the highest bit set, then fls64(x) is 64. (1UL << 64) is an overflow and breaks the algorithm. Subtracting 1 is a better guess for the initial value of m anyway and that's what also done in int_sqrt() implicitly [*]. [*] Note how int_sqrt() uses __fls() with two underscores, which already returns the proper raw bit number. In contrast, int_sqrt64() used fls64(), and that returns bit numbers illogically starting at 1, because of error handling for the "no bits set" case. Will points out that he bug probably is due to a copy-and-paste error from the regular int_sqrt() case. Signed-off-by: NFlorian La Roche <Florian.LaRoche@googlemail.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 1月, 2019 16 次提交
-
-
由 Will Deacon 提交于
Commit 594cc251 ("make 'user_access_begin()' do 'access_ok()'") makes the access_ok() check part of the user_access_begin() preceding a series of 'unsafe' accesses. This has the desirable effect of ensuring that all 'unsafe' accesses have been range-checked, without having to pick through all of the callsites to verify whether the appropriate checking has been made. However, the consolidated range check does not inhibit speculation, so it is still up to the caller to ensure that they are not susceptible to any speculative side-channel attacks for user addresses that ultimately fail the access_ok() check. This is an oversight, so use __uaccess_begin_nospec() to ensure that speculation is inhibited until the access_ok() check has passed. Reported-by: NJulien Thierry <julien.thierry@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "Three arm64 fixes for -rc3. We've plugged a couple of nasty issues involving KASLR-enabled kernels, and removed a redundant #define that was introduced as part of the KHWASAN fixes from akpm at -rc2. - Fix broken kpti page-table rewrite in bizarre KASLR configuration - Fix module loading with KASLR - Remove redundant definition of ARCH_SLAB_MINALIGN" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: kasan, arm64: remove redundant ARCH_SLAB_MINALIGN define arm64: kaslr: ensure randomized quantities are clean to the PoC arm64: kpti: Update arm64_kernel_use_ng_mappings() when forced on
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Daniel Borkmann says: ==================== pull-request: bpf 2019-01-20 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem. 2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter. 3) Fix map in map masking to prevent out-of-bounds access under speculative execution, from Daniel. 4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal pacing, from Yuchung. 5) Fix json writer license in bpftool, from Thomas. 6) Fix AF_XDP to check if an actually queue exists during umem setup, from Krzysztof. 7) Several fixes to BPF stackmap's build id handling. Another fix for bpftool build to account for libbfd variations wrt linking requirements, from Stanislav. 8) Fix BPF samples build with clang by working around missing asm goto, from Yonghong. 9) Fix libbpf to retry program load on signal interrupt, from Lorenz. 10) Various minor compile warning fixes in BPF code, from Mathieu. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Syzkaller was able to construct a packet of negative length by redirecting from bpf_prog_test_run_skb with BPF_PROG_TYPE_LWT_XMIT: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:345 [inline] BUG: KASAN: slab-out-of-bounds in skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline] BUG: KASAN: slab-out-of-bounds in __pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395 Read of size 4294967282 at addr ffff8801d798009c by task syz-executor2/12942 kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x23/0x50 mm/kasan/kasan.c:302 memcpy include/linux/string.h:345 [inline] skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline] __pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395 __pskb_copy include/linux/skbuff.h:1053 [inline] pskb_copy include/linux/skbuff.h:2904 [inline] skb_realloc_headroom+0xe7/0x120 net/core/skbuff.c:1539 ipip6_tunnel_xmit net/ipv6/sit.c:965 [inline] sit_tunnel_xmit+0xe1b/0x30d0 net/ipv6/sit.c:1029 __netdev_start_xmit include/linux/netdevice.h:4325 [inline] netdev_start_xmit include/linux/netdevice.h:4334 [inline] xmit_one net/core/dev.c:3219 [inline] dev_hard_start_xmit+0x295/0xc90 net/core/dev.c:3235 __dev_queue_xmit+0x2f0d/0x3950 net/core/dev.c:3805 dev_queue_xmit+0x17/0x20 net/core/dev.c:3838 __bpf_tx_skb net/core/filter.c:2016 [inline] __bpf_redirect_common net/core/filter.c:2054 [inline] __bpf_redirect+0x5cf/0xb20 net/core/filter.c:2061 ____bpf_clone_redirect net/core/filter.c:2094 [inline] bpf_clone_redirect+0x2f6/0x490 net/core/filter.c:2066 bpf_prog_41f2bcae09cd4ac3+0xb25/0x1000 The generated test constructs a packet with mac header, network header, skb->data pointing to network header and skb->len 0. Redirecting to a sit0 through __bpf_redirect_no_mac pulls the mac length, even though skb->data already is at skb->network_header. bpf_prog_test_run_skb has already pulled it as LWT_XMIT !is_l2. Update the offset calculation to pull only if skb->data differs from skb->network_header, which is not true in this case. The test itself can be run only from commit 1cf1cae9 ("bpf: introduce BPF_PROG_TEST_RUN command"), but the same type of packets with skb at network header could already be built from lwt xmit hooks, so this fix is more relevant to that commit. Also set the mac header on redirect from LWT_XMIT, as even after this change to __bpf_redirect_no_mac that field is expected to be set, but is not yet in ip_finish_output2. Fixes: 3a0af8fd ("bpf: BPF for lightweight tunnel infrastructure") Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Michael S. Tsirkin 提交于
Use napi_consume_skb() to get bulk free. Note that napi_consume_skb is safe to call in a non-napi context as long as the napi_budget flag is correct. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux由 Linus Torvalds 提交于
Pull MIPS fixes from Paul Burton: - Fix IPI handling for Lantiq SoCs, which was broken by changes made back in v4.12. - Enable OF/DT serial support in ath79_defconfig to give us working serial by default. - Fix 64b builds for the Jazz platform. - Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers to perform DMA again following the major DMA mapping changes made in v4.19. - Disable MSI on Cavium Octeon systems when the pcie_disable command line parameter introduced in v3.3 is used, in order to avoid inadvetently accessing PCIe controller registers despite the command line. - Fix a build failure for Cavium Octeon kernels with kexec enabled, introduced in v4.20. - Fix a regression in the behaviour of semctl/shmctl/msgctl IPC syscalls for kernels including n32 support but not o32 support caused by some cleanup in v3.19. * tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: OCTEON: fix kexec support mips: fix n32 compat_ipc_parse_version Disable MSI also when pcie-octeon.pcie_disable on MIPS: BCM47XX: Setup struct device for the SoC MIPS: jazz: fix 64bit build MIPS: ath79: Enable OF serial ports in the default config MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQ MIPS: lantiq: Fix IPI interrupt handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux由 Linus Torvalds 提交于
Pull Devicetree fix from Rob Herring: "A single build fix for powerpc due to device_node.type removal" * tag 'devicetree-fixes-for-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: powerpc: chrp: Use of_node_is_type to access device_type
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "A crash fix, a build warning fix, a miscellaneous small cleanups. In case anyone is looking for them, there was a regression caught by testing that caused two patches to be dropped from this update. Those patches have been reworked and will soak for another week / re-target 5.0-rc4. - Fix driver initialization crash due to the inability to report an 'error' state for a DIMM's security capability. - Build warning fix for little-endian ARM64 builds - Fix a potential race between the EDAC driver's usage of the NFIT SMBIOS id for a DIMM and the driver shutdown path. - A small collection of one-line benign cleanups for duplicate variable assignments, a duplicate header include and a mis-typed function argument" * tag 'libnvdimm-fixes-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: Fix nvdimm_security_state() state request selection acpi/nfit: Remove duplicate set nd_set in acpi_nfit_init_interleave_set() acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id() libnvdimm/dimm: Fix security capability detection for non-Intel NVDIMMs nfit: Mark some functions as __maybe_unused ACPI/nfit: delete the function to_acpi_nfit_desc ACPI/nfit: delete the redundant header file
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: - mt7621_wdt/rt2880_wdt: Fix compilation problem - tqmx86: Fix a couple IS_ERR() vs NULL bugs * tag 'linux-watchdog-5.0-rc-fixes' of git://www.linux-watchdog.org/linux-watchdog: watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client fixes from Anna Schumaker: "These are mostly fixes for SUNRPC bugs, with a single v4.2 copy_file_range() fix mixed in. Stable bugfixes: - Fix TCP receive code on archs with flush_dcache_page() Other bugfixes: - Fix error code in rpcrdma_buffer_create() - Fix a double free in rpcrdma_send_ctxs_create() - Fix kernel BUG at kernel/cred.c:825 - Fix unnecessary retry in nfs42_proc_copy_file_range() - Ensure rq_bytes_sent is reset before request transmission - Ensure we respect the RPCSEC_GSS sequence number limit - Address Kerberos performance/behavior regression" * tag 'nfs-for-5.0-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: Address Kerberos performance/behavior regression SUNRPC: Ensure we respect the RPCSEC_GSS sequence number limit SUNRPC: Ensure rq_bytes_sent is reset before request transmission NFSv4.2 fix unnecessary retry in nfs4_copy_file_range sunrpc: kernel BUG at kernel/cred.c:825! SUNRPC: Fix TCP receive code on archs with flush_dcache_page() xprtrdma: Double free in rpcrdma_sendctxs_create() xprtrdma: Fix error code in rpcrdma_buffer_create()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "A set of 17 fixes. Most of these are minor or trivial. The one fix that may be serious is the isci one: the bug can cause hba parameters to be set from uninitialized memory. I don't think it's exploitable, but you never know" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: add wait_for_completion() scsi: qla1280: set 64bit coherent mask scsi: ufs: Fix geometry descriptor size scsi: megaraid_sas: Retry reads of outbound_intr_status reg scsi: qedi: Add ep_state for login completion on un-reachable targets scsi: ufs: Fix system suspend status scsi: qla2xxx: Use correct number of vectors for online CPUs scsi: hisi_sas: Set protection parameters prior to adding SCSI host scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes scsi: isci: initialize shost fully before calling scsi_add_host() scsi: lpfc: lpfc_sli: Mark expected switch fall-throughs scsi: smartpqi_init: fix boolean expression in pqi_device_remove_start scsi: core: Synchronize request queue PM status only on successful resume scsi: pm80xx: reduce indentation scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param scsi: megaraid_sas: correct an info message scsi: target/iscsi: fix error msg typo when create lio_qr_cache failed scsi: sd: Fix cache_type_store()
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: - block size setting fixes for loop/nbd (Jan Kara) - md bio_alloc_mddev() cleanup (Marcos) - Ensure we don't lose the REQ_INTEGRITY flag (Ming) - Two NVMe fixes by way of Christoph: - Fix NVMe IRQ calculation (Ming) - Uninitialized variable in nvmet-tcp (Sagi) - BFQ comment fix (Paolo) - License cleanup for recently added blk-mq-debugfs-zoned (Thomas) * tag 'for-linus-20190118' of git://git.kernel.dk/linux-block: block: Cleanup license notice nvme-pci: fix nvme_setup_irqs() nvmet-tcp: fix uninitialized variable access block: don't lose track of REQ_INTEGRITY flag blockdev: Fix livelocks on loop device nbd: Use set_blocksize() to set device blocksize md: Make bio_alloc_mddev use bio_alloc_bioset block, bfq: fix comments on __bfq_deactivate_entity
-
由 Jason Gunthorpe 提交于
Re-run the shell fragment that generated the original list. In particular this adds the missing xarray related functions. Signed-off-by: NJason Gunthorpe <jgg@mellanox.com> Signed-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
-
由 Camelia Groza 提交于
Since phy driver features became a link_mode bitmap, phy drivers that don't have a list of features configured will cause the kernel to crash when probed. Prevent the phy driver from registering if the features field is missing. Fixes: 719655a1 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: NScott Wood <oss@buserror.net> Signed-off-by: NCamelia Groza <camelia.groza@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Chancellor 提交于
A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file. drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int] cinfo->version[j] = "\0\0" + 1; ~~~~~~~^~~ drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning cinfo->version[j] = "\0\0" + 1; ^ & [ ] 1 warning generated. This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage. Link: https://github.com/ClangBuiltLinux/linux/issues/309Suggested-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rob Herring 提交于
Commit 8ce5f841 ("of: Remove struct device_node.type pointer") removed struct device_node.type pointer, but the conversion to use of_node_is_type() accessor was missed in chrp_init_IRQ(). Fixes: 8ce5f841 ("of: Remove struct device_node.type pointer") Reported-by: Nkbuild test robot <lkp@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 19 1月, 2019 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-01-18 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.18 ('net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames') The patch doesn't apply cleanly to 4.18.y, but it is very simple to resolve, what should be the procedure here ? ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-