Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 09 2月, 2019 11 次提交
  3. 08 2月, 2019 3 次提交
    • R
      net: marvell: neta: add comphy support · a10c1c81
      由 Russell King 提交于 
      Add support for the common phy binding, so that we can reconfigure the
comphy according to the desired ethernet speed.  This will allow us to
support 1000base-X and 2500base-X SFPs dynamically on SolidRun Clearfog.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a10c1c81
    • E
      net/mlx5e: Add tx timeout support for mlx5e tx reporter · 7d91126b
      由 Eran Ben Elisha 提交于 
      With this patch, ndo_tx_timeout callback will be redirected to the tx
reporter in order to detect a tx timeout error and report it to the
devlink health. (The watchdog detects tx timeouts, but the driver verify
the issue still exists before launching any recover method).

In addition, recover from tx timeout in case of lost interrupt was added
to the tx reporter recover method. The tx timeout recover from lost
interrupt is not a new feature in the driver, this patch re-organize the
functionality and move it to the tx reporter recovery flow.

tx timeout example:
(with auto_recover set to false, if set to true, the manual recover and
diagnose sections are irrelevant)

$cat /sys/kernel/debug/tracing/trace
...
devlink_health_report: bus_name=pci dev_name=0000:00:09.0
driver_name=mlx5_core reporter_name=tx: TX timeout on queue: 0, SQ: 0x8a,
CQ: 0x35, SQ Cons: 0x2 SQ Prod: 0x2, usecs since last trans: 14912000

$devlink health show
pci/0000:00:09.0:
  name tx
    state healthy #err 1 #recover 0 last_dump_ts N/A
    parameters:
      grace_period 500 auto_recover false

$devlink health diagnose pci/0000:00:09.0 reporter tx -j -p
{
    "SQs": [ {
            "sqn": 138,
            "HW state": 1,
            "stopped": true
        },{
            "sqn": 142,
            "HW state": 1,
            "stopped": false
        } ]
}

$devlink health diagnose pci/0000:00:09.0 reporter tx
SQs:
  sqn: 138 HW state: 1 stopped: true
  sqn: 142 HW state: 1 stopped: false

$devlink health recover pci/0000:00:09 reporter tx
$devlink health show
pci/0000:00:09.0:
  name tx
    state healthy #err 1 #recover 1 last_dump_ts N/A
    parameters:
      grace_period 500 auto_recover false
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7d91126b
    • E
      net/mlx5e: Add tx reporter support · de8650a8
      由 Eran Ben Elisha 提交于 
      Add mlx5e tx reporter to devlink health reporters. This reporter will be
responsible for diagnosing, reporting and recovering of tx errors.
This patch declares the TX reporter operations and creates it using the
devlink health API. Currently, this reporter supports reporting and
recovering from send error CQE only. In addition, it adds diagnose
information for the open SQs.

For a local SQ recover (due to driver error report), in case of SQ recover
failure, the recover operation will be considered as a failure.
For a full tx recover, an attempt to close and open the channels will be
done. If this one passed successfully, it will be considered as a
successful recover.

The SQ recover from error CQE flow is not a new feature in the driver,
this patch re-organize the functions and adapt them for the devlink
health API. For this purpose, move code from en_main.c to a new file
named reporter_tx.c.

Diagnose output:
$devlink health diagnose pci/0000:00:09.0 reporter tx -j -p
{
    "SQs": [ {
            "sqn": 138,
            "HW state": 1,
            "stopped": false
        },{
            "sqn": 142,
            "HW state": 1,
            "stopped": false
        } ]
}

$devlink health diagnose pci/0000:00:09.0 reporter tx
SQs:
  sqn: 138 HW state: 1 stopped: false
  sqn: 142 HW state: 1 stopped: false
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      de8650a8
  5. 07 2月, 2019 26 次提交