- 05 2月, 2012 19 次提交
-
-
由 Padmanabh Ratnakar 提交于
VFs use get mac list command to get their mac address. The format of this command has changed. Update driver to use the new format. Signed-off-by: NMammatha Edhala <mammatha.edhala@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Version number in query link status command is getting overwritten in be_wrb_cmd_hdr_prepare() routine. Move the initialization to fix this issue. Also initialize the domain field. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Implement RX flip buffer in the cfhsi_rx_done function, piggy-backed frames is also supported. This gives a significant performance gain for CAIF over HSI. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
Check if firmware supports a particular command by first checking capability using devcmd CMD_CAPABILITY. Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
This patch enables support for multiple receive queues. If multiple receive queues are used ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max number of supported receive queues per vnic is 8. Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Driver was leaking memory when page allocation failures occurs. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
we have copied skb into addr(page), skb->data doesn't contain ip header information. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
Log dump status. Remove unmatched qlcnic_api_unlock call. Update version to 5.0.26. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Check bits 8-28 of peg_halt status register for firmware abort code. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Report valid link statistics when link is down. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
When firmware hang is detected, fw should stop sending pause control frames. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
o Update version to 4.0.78 Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Pass adapter->pdev->dev instead of netdev->dev Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Log states of essential registers on firmware hang detection. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Pass the adapter phy link status to the caller. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Reading CRB registers(if reqd) before releasing the api lock. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 2月, 2012 5 次提交
-
-
由 Krishna Gudipati 提交于
Incorporated review comments from Ben Hutchings. Change details: - Implement ethtool flash_device() entry point to write the firmware image to the flash firmware partition. Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Reviewed-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masanari Iida 提交于
Correct spelling in "uncommited" to "uncommitted" in drivers/net/vmxnet3/vmxnet3_drv.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
Fixed 'warning: return from incompatible pointer type' related to module parameters. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Also rename a few counters appropritely and delete 2 counters that are not implemented in HW. vlan_mismatch_drops does not exist in BE3 and is accounted for in address_mismatch_drops. Do the same thing for BE2 and Lancer. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
The X520 family of network devices, with the 82599 chip, support a small number of Intel-verified SFP+ modules on their NICs. To maintain stability and quality, the current devices restrict untested 3rd party SFP+ modules. This patch introduces a module parameter for ixgbe to allow these untested modules at the user's peril. It also includes a warning to the syslog alerting users that the modules aren't supported, and results may vary. CC: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2012 2 次提交
-
-
由 Joe Perches 提交于
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
alloc failures use dump_stack so emitting an additional out-of-memory message is an unnecessary duplication. Remove the allocation failure messages. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 1月, 2012 9 次提交
-
-
由 Francois Romieu 提交于
rtl8169_get_regs operates under RTNL and rtl task mutex whereas rtl_set_rx_mode is either called under RTNL or rtl task mutex protection. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Suggested-by: NMichał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Simpler, more consistent, with negligible cost in non-critical paths. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Suggested-by: NMichał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
- atomic bit operations are globally visible - pending status is always cleared before execution - scheduled works are either idempotent or only required to happen once after a series of originating events, say link events for instance Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Suggested-by: NMichał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
With infinite gratitude to Eric Dumazet for allowing me to identify the error. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Paul Gortmaker 提交于
This code is clearly unused, since it has a #error right in it. Given the vintage of sun3 hardware, it is probably safe to assume that there is little interest in adding new functionality to the driver now, so just delete the unused block of code. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NSam Creasey <sammy@sammy.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
The reorganization of the driver layout in drivers/net left behind some stale paths in comments and in Kconfig help text. Bring them up to date. No actual change to any code takes place here. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This function returns the page offset of the buffer, which can be calculated based on either its DMA address or its virtual address. It used to use the virtual address and we would cast that to unsigned long, as anything smaller would result in a compiler warning. Now that it's using the DMA address we should use unsigned int, matching the return type. It is also unnecessary to use __force. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
<linux/mtd/mtd.h> no longer defines DEBUG so we do not need to un-define it here. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
- 28 1月, 2012 2 次提交
-
-
由 Francois Romieu 提交于
The irq handler was a mess. See 7ab87ff4 ("via-rhine: move work from irq handler to softirq and beyond") for similar changes. One can notice: - all non-napi tasks are explicitely scheduled trough a single work queue. - hiding software tx queue start behind the rtl_hw_start method is mildly natural. Move it in the caller where needed. - as can be seen from the heavy use of bh disabling locks, the driver is not safe for irq context messages with netconsole. It is still quite usable for general messaging though. Tested ok with concurrent registers dump (ethtool -d) + background traffic + "echo t > /proc/sysrq-trigger". Tested with old PCI chipset, PCIe 8168 and 810x: - XID 0c900800 RTL8168evl/8111evl - XID 18000000 RTL8168b/8111b - XID 98000000 RTL8169sc/8110sc - XID 083000c0 RTL8168d/8111d - XID 081000c0 RTL8168d/8111d - XID 00b00000 RTL8105e - XID 04a00000 RTL8102e As a side note, the comments in f11a377b ("r8169: avoid losing MSI interrupts") does not seem completely clear: if I hack the driver further to stop acking the irq link event bit, MSI interrupts keep being delivered (RTL8168b/8111b, XID 18000000). Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
- 27 1月, 2012 3 次提交
-
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Though motivated by the move of the driver to a single work queue of sequential events and removal of hard irq processing, it looks safe as a standalone change. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-