In the cipher safexcel_send_req function, GCC warns that
first_rdesc may be used uninitialized. While this should never
happen, this patch removes the warning by initializing this
variable to NULL to make GCC happy.

This was reported by the kbuild test robot.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use the appropriate SPDX license identifiers and drop the license text.
This patch is only cosmetic.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix the b value to be compliant with FIPS 186-4 D.1.2.1. This fix is
required to make sure the SP800-56A public key test passes for P-192.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

By adding a zero byte-length for the DH parameter Q value, the public
key verification test is disabled for the given test.
Reported-by: NEric Biggers <ebiggers3@gmail.com>
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The CTR DRBG requires two SGLs pointing to input/output buffers for the
CTR AES operation. The used SGLs always have only one entry. Thus, the
SGL can be initialized during allocation time, preventing a
re-initialization of the SGLs during each call.

The performance is increased by about 1 to 3 percent depending on the
size of the requested buffer size.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In case memory resources for *base* were allocated, release them
before return.

Addresses-Coverity-ID: 1471702 ("Resource leak")
Fixes: e3fe0ae1 ("crypto: dh - add public key verification test")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NStephan Müller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Cast *val* to u64 in order to give the compiler complete
information about the proper arithmetic to use.

Notice that such variable is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

val << bit_pos

Addresses-Coverity-ID: 1467425 ("Unintentional integer overflow")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a new CCP/PSP PCI device ID and new PSP register offsets.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Reviewed-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In preparation for adding a new PSP device ID that uses different register
offsets, add support to the PSP version data for register offset values.
And then update the code to use these new register offset values.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Reviewed-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove some unused #defines for register offsets that are not used. This
will lessen the changes required when register offsets change between
versions of the device.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Reviewed-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a dev_notice() message to the PSP initialization to report when the
PSP initialization has succeeded and the PSP is enabled.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The wait_event() function is used to detect command completion.  The
interrupt handler will set the wait condition variable when the interrupt
is triggered.  However, the variable used for wait_event() is initialized
after the command has been submitted, which can create a race condition
with the interrupt handler and result in the wait_event() never returning.
Move the initialization of the wait condition variable to just before
command submission.

Fixes: 200664d5 ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Cc: <stable@vger.kernel.org> # 4.16.x-
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: NBrijesh Singh <brijesh.singh@amd.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

A debug print about register status post interrupt can happen
quite often. Rate limit it to avoid cluttering the log.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ccree driver implemented NIST 800-38A CBC-CS2 ciphertext format,
which only reverses the last two blocks if the stolen ciphertext amount
are none zero. Move it to the kernel chosen format of CBC-CS3  which swaps
the final blocks unconditionally and rename it to "cts" now that it
complies with the kernel format and passes the self tests.

Ironically, the CryptoCell REE HW does just that, so the fix is dropping
the code that forced it to use plain CBC if the ciphertext was block
aligned.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove legacy code no longer used by anything.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We were copying our last cipher block into the request for use as IV for
all modes of operations. Fix this by discerning the behaviour based on
the mode of operation used: copy ciphertext for CBC, update counter for
CTR.

CC: stable@vger.kernel.org
Fixes: 63ee04c8 ("crypto: ccree - add skcipher support")
Reported by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The testmgr hash tests were testing init, digest, update and final
methods but not the finup method. Add a test for this one too.

While doing this, make sure we only run the partial tests once with
the digest tests and skip them with the final and finup tests since
they are the same.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

finup() operation was incorrect, padding was missing.
Fix by setting the ccree HW to enable padding.
Signed-off-by: NHadar Gat <hadar.gat@arm.com>
[ gilad@benyossef.com: refactored for better code sharing ]
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some crypto API users allocating a tfm with crypto_alloc_$FOO() are also
specifying the type flags for $FOO, e.g. crypto_alloc_shash() with
CRYPTO_ALG_TYPE_SHASH.  But, that's redundant since the crypto API will
override any specified type flag/mask with the correct ones.

So, remove the unneeded flags.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some skcipher algorithms set .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER.  But
this is redundant with the C structure type ('struct skcipher_alg'), and
crypto_register_skcipher() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the skcipher algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some aead algorithms set .cra_flags = CRYPTO_ALG_TYPE_AEAD.  But this is
redundant with the C structure type ('struct aead_alg'), and
crypto_register_aead() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the aead algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some ahash algorithms set .cra_type = &crypto_ahash_type.  But this is
redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the .cra_type automatically.
Apparently the useless assignment has just been copy+pasted around.

So, remove the useless assignment from all the ahash algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Many ahash algorithms set .cra_flags = CRYPTO_ALG_TYPE_AHASH.  But this
is redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the ahash algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH.  But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the shash algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

With all the crypto modules enabled on x86, and with a CPU that supports
AVX-2 but not SHA-NI instructions (e.g. Haswell, Broadwell, Skylake),
the "multibuffer" implementations of SHA-1, SHA-256, and SHA-512 are the
highest priority.  However, these implementations only perform well when
many hash requests are being submitted concurrently, filling all 8 AVX-2
lanes.  Otherwise, they are incredibly slow, as they waste time waiting
for more requests to arrive before proceeding to execute each request.

For example, here are the speeds I see hashing 4096-byte buffers with a
single thread on a Haswell-based processor:

            generic            avx2          mb (multibuffer)
            -------            --------      ----------------
sha1        602 MB/s           997 MB/s      0.61 MB/s
sha256      228 MB/s           412 MB/s      0.61 MB/s
sha512      312 MB/s           559 MB/s      0.61 MB/s

So, the multibuffer implementation is 500 to 1000 times slower than the
other implementations.  Note that with smaller buffers or more update()s
per digest, the difference would be even greater.

I believe the vast majority of people are in the boat where the
multibuffer code is much slower, and only a small minority are doing the
highly parallel, hashing-intensive, latency-flexible workloads (maybe
IPsec on servers?) where the multibuffer code may be beneficial.  Yet,
people often aren't familiar with all the crypto config options and so
the multibuffer code may inadvertently be built into the kernel.

Also the multibuffer code apparently hasn't been very well tested,
seeing as it was sometimes computing the wrong SHA-256 digest.

So, let's make the multibuffer algorithms low priority.  Users who want
to use them can either request them explicitly by driver name, or use
NETLINK_CRYPTO (crypto_user) to increase their priority at runtime.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sha512-generic and sha384-generic had a cra_priority of 0, so it wasn't
possible to have a lower priority SHA-512 or SHA-384 implementation, as
is desired for sha512_mb which is only useful under certain workloads
and is otherwise extremely slow.  Change them to priority 100, which is
the priority used for many of the other generic algorithms.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sha256-generic and sha224-generic had a cra_priority of 0, so it wasn't
possible to have a lower priority SHA-256 or SHA-224 implementation, as
is desired for sha256_mb which is only useful under certain workloads
and is otherwise extremely slow.  Change them to priority 100, which is
the priority used for many of the other generic algorithms.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sha1-generic had a cra_priority of 0, so it wasn't possible to have a
lower priority SHA-1 implementation, as is desired for sha1_mb which is
only useful under certain workloads and is otherwise extremely slow.
Change it to priority 100, which is the priority used for many of the
other generic algorithms.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

"arch/x86/crypto/sha*-mb" needs a trailing slash, since it refers to
directories.  Otherwise get_maintainer.pl doesn't find the entry.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There is a copy-paste error where sha256_mb_mgr_get_comp_job_avx2()
copies the SHA-256 digest state from sha256_mb_mgr::args::digest to
job_sha256::result_digest.  Consequently, the sha256_mb algorithm
sometimes calculates the wrong digest.  Fix it.

Reproducer using AF_ALG:

    #include <assert.h>
    #include <linux/if_alg.h>
    #include <stdio.h>
    #include <string.h>
    #include <sys/socket.h>
    #include <unistd.h>

    static const __u8 expected[32] =
        "\xad\x7f\xac\xb2\x58\x6f\xc6\xe9\x66\xc0\x04\xd7\xd1\xd1\x6b\x02"
        "\x4f\x58\x05\xff\x7c\xb4\x7c\x7a\x85\xda\xbd\x8b\x48\x89\x2c\xa7";

    int main()
    {
        int fd;
        struct sockaddr_alg addr = {
            .salg_type = "hash",
            .salg_name = "sha256_mb",
        };
        __u8 data[4096] = { 0 };
        __u8 digest[32];
        int ret;
        int i;

        fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
        bind(fd, (void *)&addr, sizeof(addr));
        fork();
        fd = accept(fd, 0, 0);
        do {
            ret = write(fd, data, 4096);
            assert(ret == 4096);
            ret = read(fd, digest, 32);
            assert(ret == 32);
        } while (memcmp(digest, expected, 32) == 0);

        printf("wrong digest: ");
        for (i = 0; i < 32; i++)
            printf("%02x", digest[i]);
        printf("\n");
    }

Output was:

    wrong digest: ad7facb2000000000000000000000000ffffffef7cb47c7a85dabd8b48892ca7

Fixes: 172b1d6b ("crypto: sha256-mb - fix ctx pointer and digest copy")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch main goal is to improve driver performance by moving the
crypto request from a list to a RDR ring shadow.

This is possible since there is one producer and one consume for this
RDR request shadow and one ring descriptor is left unused.
Doing this change eliminates the use of spinlock when accessing the
descriptor ring and the need to dynamicaly allocate memory per crypto
request.

The crypto request is placed in the first RDR shadow descriptor only
if there are enough descriptors, when the result handler is invoked,
it fetches the first result descriptor from RDR shadow.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for two new algorithms in the Inside Secure
SafeXcel cryptographic engine driver: ecb(des3_ede) and cbc(des3_ede).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for two algorithms in the Inside Secure SafeXcel
cryptographic engine driver: ecb(des) and cbc(des).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the hmac(md5) algorithm in the Inside Secure
SafeXcel cryptographic engine driver.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the MD5 algorithm support to the Inside Secure SafeXcel
cryptographic engine driver.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ORO bridge (connected to the EIP197 write channel) does not
generate back pressure towards the EIP197 when its internal FIFO is
full. It assumes that the EIP will not drive more write transactions
than the maximal supported outstanding (32).

Hence tx_max_cmd_queue must be configured to 5 (or less).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds extra steps in the module removal path, to reset the
command and result rings. The corresponding interrupts are cleared, and
the ring address configuration is reset.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: small reworks, commit message]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch updates the TRC configuration so that the version of the
EIP197 engine being used is taken into account, as the configuration
differs between the EIP197B and the EIP197D.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: commit message]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch documents the new compatible used for the eip197d engine, as
this new engine is now supported by the Inside Secure SafeXcel
cryptographic driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the eip197d engine to the Inside Secure
SafeXcel cryptographic driver. This new engine is similar to the eip197b
and reuse most of its code.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>