The rc_model_size is specified in the DSC config, and the hardware
programming should respect that instead of hard coding a value of 8192.

Regardless, the rc_model_size in DSC config is currently hard coded to
the same value, so this should have no impact, other than allowing the
use of other sizes as needed.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/27d86ad25832bbb985f6e996f3d02dca01a66895.1607429866.git.jani.nikula@intel.com

The PPS is supposed to reflect the DSC config instead of hard coding the
rc_model_size. Make it so.

Currently all users of drm_dsc_pps_payload_pack() hard code the size to
8192 also in the DSC config, so this change should have no impact, other
than allowing the drivers to use other sizes as needed.

Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3246aff585efcd728ee3dc96f52db5e46f6a162.1607429866.git.jani.nikula@intel.com

This patch fixes the slice count computation algorithm
for calculating the slice count based on Peak pixel rate
and the max slice width allowed on the DSC engines.
We need to ensure slice count > min slice count req
as per DP spec based on peak pixel rate and that it is
greater than min slice count based on the max slice width
advertised by DPCD. So use max of these two.
In the prev patch we were using min of these 2 causing it
to violate the max slice width limitation causing a blank
screen on 8K@60.

Fixes: d9218c8f ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204205804.25225-1-manasi.d.navare@intel.com

The Bspec does not mention polling the FEC Enable
Live status bit. That is only there for debug purposes.
So remove the polling from driver.

Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125072634.27664-1-manasi.d.navare@intel.com

Switch off the scanout during driver unregister, so we can shutdown the
HW immediately for unbind.

v2: Remove the old shutdown from remove, it should now be redundant.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204161601.20897-1-chris@chris-wilson.co.uk

Let's do the kill_bigjoiner_slave() thing from
intel_bigjoiner_add_affected_crtcs() since it's related to
what we do there. This cleans up the logic in the
compute_config() loop a bit.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-4-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>

If either of the bigjoiner pipes needs a modeset then we need
a modeset on both pipes. Make it so.

v2: Split out the kill_bigjoiner_slave() change (Manasi)
    Add affected connectors/planes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-3-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>

drm_atomic_add_affected_planes() only considers planes which
are logically enabled in the uapi state. For bigjoiner we need
to consider planes logically enabled in the hw state. Add a
helper for that.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-2-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>

Currently crtc_state->uapi.plane_mask only tracks logically
enabled planes on the uapi level. For bigjoiner purposes
we want to do the same for the hw state. Let's follow the
pattern established by active_planes & co. here.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-1-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>

VRR_CTL register only had a GENMASK but no field prep
define for TRANS_VRR_CTL_LINE_COUNT field so add that

Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201202182727.26158-1-manasi.d.navare@intel.com

Throw away all the debugfs entries that are not being actively used for
debugging/developing IGT. Note that a couple of these are already and
will remain available under the gt/

Files removed:
	i915_gem_fence_regs
	i915_gem_interrupt
	i915_ring_freq_table
	i915_context_status
	i915_llc
	i915_shrinker_info
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201202112140.16759-1-chris@chris-wilson.co.uk

All the display power domain references are wakeref tracked now, so we
can mark intel_display_power_put_unchecked() as an internal function
(for suppressing wakeref tracking in non-debug builds).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-10-imre.deak@intel.com

Add wakeref tracking for the display power domain reference taken to
keep the display power well functionality disabled.

v2: Add missing wakeref zeroing to intel_power_domains_driver_remove()

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-2-imre.deak@intel.com

Rename power_domains.wakeref to power_domains.init_wakeref to make the
use of this reference clearer. The next patch adds tracking for another
power reference user of the power_domains functionality.

While at it add a missing zero wakeref assert when setting the wakeref.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-8-imre.deak@intel.com

Add wakeref tracking for the eDP encoders' AUX display power domain
references taken while the panel's VDD is enabled.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-7-imre.deak@intel.com

Add wakeref tracking for the DDI encoders' main lane AUX display power
domain references.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-6-imre.deak@intel.com

Add wakeref tracking for the DDI encoders' DDI_IO display power domain
references.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-5-imre.deak@intel.com

Add wakeref tracking for display power domain references taken for
enabled CRTCs.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-4-imre.deak@intel.com

Factor out helper functions to get/put a set of power domains that are
tracked using their wakeref handles. The same is needed by the next
patch adding tracking for enabled CRTC power domains.

v2: s/uint64_t/u64/ (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-1-imre.deak@intel.com

The for_each_oldnew_intel_crtc_in_state() iterator index does match
crtc->pipe, but using the same thing as array index when getting and
putting CRTC power domains makes things clearer.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-2-imre.deak@intel.com

This moves the functions into static const instead of having
funcs and data in the same struct.

It leaves the power callback alone, as it is used in a different
manner.

v2: leave power callback alone (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130210945.31850-1-airlied@gmail.com

Since we try and estimate how long we require to update the registers to
perform a plane update, it is of vital importance that we measure the
distribution of plane updates to better guide our estimate. If we
underestimate how long it takes to perform the plane update, we may
slip into the next scanout frame causing a tear. If we overestimate, we
may unnecessarily delay the update to the next frame, causing visible
jitter.

Replace the warning that we exceed some arbitrary threshold for the
vblank update with a histogram for debugfs.

v2: Add a per-crtc debugfs entry so that the information is easier to
extract when testing individual CRTC, and so that it can be reset before
a test.

v3: Flip the graph on its side; creates space to label the time axis.

Updates: 4684
       |
   1us |
       |
   4us |********
       |**********
  16us |***********
       |*****
  66us |
       |
 262us |
       |
   1ms |
       |
   4ms |
       |
  17ms |
       |
Min update: 5918ns
Max update: 54781ns
Average update: 16628ns
Overruns > 250us: 0

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1982Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20201202212814.26320-1-chris@chris-wilson.co.uk

Good riddance! Remove the macros and their remaining references in
comments.

The following functions should be used instead, depending on the use
case:

- intel_uncore_read(), intel_uncore_write(), intel_uncore_posting_read()

- intel_de_read(), intel_de_write(), intel_de_posting_read()
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-10-jani.nikula@intel.com

FBC can be re-enabled on TGL with WA of keeping it disabled
while PSR2 is enabled.

This reverts commit 2982ded2.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201190406.1752-3-uma.shankar@intel.com

There are some corner cases wrt underrun when we enable
FBC with PSR2 on TGL. Recommendation from hardware is to
keep this combination disabled.

Bspec: 50422 HSD: 14010260002

v2: Added psr2 enabled check from crtc_state (Anshuman)
Added Bspec link and HSD referneces (Jose)

v3: Moved the logic to disable fbc to intel_fbc_update_state_cache
and removed the crtc->config usages, as per Ville's recommendation.

v4: Introduced a variable in fbc state_cache instead of the earlier
plane.visible WA, as suggested by Jose.

v5: Dropped an extra check for fbc in intel_fbc_enable and addressed
review comments by Jose.

v6: Move WA to end of function and added Jose's RB.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201190406.1752-2-uma.shankar@intel.com

Let's avoid adding new I915_WRITE uses while we try to get rid of them.

Fixes: 5f60b12e ("drm/i915/gvt: Save/restore HW status to support GVT suspend/resume")
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Reviewed-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-9-jani.nikula@intel.com

Non-HDMI sinks shouldn't be sent Dynamic Range and Mastering infoframes.
Check for that when using LSPCON.

v2: Addressed Ville's review comment.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-15-uma.shankar@intel.com

Implement Read back of HDR metadata infoframes i.e Dynamic Range
and Mastering Infoframe for LSPCON devices.

v2: Added proper bitmask of enabled infoframes as per Ville's
recommendation.

v3: Dropped a redundant wrapper as per Ville's comment.

v4: Dropped a redundant print, added Ville's RB.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-14-uma.shankar@intel.com

Implemented Infoframes enabled readback for LSPCON devices.
This will help align the implementation with state readback
infrastructure.

v2: Added proper bitmask of enabled infoframes as per Ville's
recommendation.

v3: Added pcon specific infoframe types instead of using the HSW
one's, as recommended by Ville.

v4: Addressed Ville's review comment by adding HDMI infoframe
versions directly instead of DIP wrappers.

v5: Re-ordered the patches to avoid potential break in usage,
as suggested by Ville.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-13-uma.shankar@intel.com

Lspcon has Infoframes as well as DIP for HDR metadata(DRM Infoframe).
Create a separate mechanism for lspcon compared to HDMI in order to
address the same and ensure future scalability.

v2: Streamlined this as per Ville's suggestions, making sure that
HDMI infoframe versions are directly returned instead of a redundant
and confusing DIP overhead.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-12-uma.shankar@intel.com

Enable HDR for LSPCON based on Parade along with MCA.

v2: Added a helper for status reg as suggested by Ville.

v3: Removed a redundant variable, added Ville's RB.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVipin Anand <vipin.anand@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-11-uma.shankar@intel.com

Dropped a irrelevant lspcon check from intel_hdmi_add_properties
function.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-10-uma.shankar@intel.com

Enable HDMI Colorspace for LSPCON based devices. Sending Colorimetry
data for HDR using AVI infoframe. LSPCON firmware expects this and though
SOC drives DP, for HDMI panel AVI infoframe is sent to the LSPCON device
which transfers the same to HDMI sink.

v2: Dropped state managed in drm core as per Jani Nikula's suggestion.

v3: Aligned colorimetry handling for lspcon as per compute_avi_infoframes,
as suggested by Ville.

v4: Finally fixed this with Ville's help, re-phrased the commit header
and description.

v5: Register HDMI colorspace for lspcon and move this to
intel_dp_add_properties as we can't create property at late_register.

Credits-to: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-9-uma.shankar@intel.com

With LSPCON we use the AVI infoframe to convey the colorimetry
information (as opposed to DP MSA/SDP), so the property we expose
should match the values we can stuff into the infoframe. Ie. we
must use the HDMI variant of the property, even though we drive
LSPCON in PCON mode. To that end just split
intel_attach_colorspace_property() into HDMI and DP variants
and let the caller worry about which one it wants to use.

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-8-uma.shankar@intel.com

Content type is supported on HDMI sink devices. Attached the
property for the same for LSPCON based devices.

v2: Added the content type programming when we are attaching
the property to connector, as suggested by Ville.

v3: Need to attach content type on intel_dp_add_properties
as creating of new properties is not possible at late_register.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-7-uma.shankar@intel.com

Add a WARN to rule out an invalid output range and format
combination. This is to align the lspcon code with
compute_avi_infoframes.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-6-uma.shankar@intel.com

This patch fixes the quantization range for YCbCr output on
Lspcon based devices.

v2: Re-phrased the description and added Ville's Rb.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-5-uma.shankar@intel.com

Attach HDR property for Gen9 devices with MCA LSPCON
chips.

v2: Cleaned HDR property attachment logic based on capability
as per Jani Nikula's suggestion.

v3: Fixed the HDR property attachment logic as per the new changes
by Kai-Feng to align with lspcon detection failure on some devices.

v4: Add HDR proprty in late_register to handle lspcon detection,
as suggested by Ville.

v5: Init Lspcon only if advertized from BIOS.

v6: Added a Todo to plan a cleanup later, added Ville's RB.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-4-uma.shankar@intel.com

Gen9 hardware supports HDMI2.0 through LSPCON chips.
Extending HDR support for MCA LSPCON based GEN9 devices.

SOC will drive LSPCON as DP and send HDR metadata as standard
DP SDP packets. LSPCON will be set to operate in PCON mode,
will receive the metadata and create Dynamic Range and
Mastering Infoframe (DRM packets) and send it to HDR capable
HDMI sink devices.

v2: Re-used hsw infoframe write implementation for HDR metadata
for LSPCON as per Ville's suggestion.

v3: Addressed Jani Nikula's review comments.

v4: Addressed Ville's review comments, removed redundant wrapper
and checks, passed arguments instead of hardcodings.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-3-uma.shankar@intel.com

LSPCON firmware exposes HDR capability through LPCON_CAPABILITIES
DPCD register. LSPCON implementations capable of supporting
HDR set HDR_CAPABILITY bit in LSPCON_CAPABILITIES to 1. This patch
reads the same, detects the HDR capability and adds this to
intel_lspcon struct.

v2: Addressed Jani Nikula's review comment and fixed the HDR
    capability detection logic

v3: Deferred HDR detection from lspcon_init (Ville)

v4: Addressed Ville's minor review comments, added his RB.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-2-uma.shankar@intel.com