Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently ipq806x soc use generic bitbang driver to
comunicate with the gmac ethernet interface.
Add a dedicated driver created by chunkeey to fix this.
Co-developed-by: NChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: NChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TUN_DEBUG and tun_debug() are no longer used anywhere, drop them.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tun driver uses custom macro tun_debug() which is only available if
TUN_DEBUG is set. Replace it by standard netif_ifinfo(). For that purpose,
rename tun_struct::debug to msg_enable and make it u32 and always present.
Finally, make tun_get_msglevel(), tun_set_msglevel() and TUNSETDEBUG ioctl
independent of TUN_DEBUG.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the tun_debug() statements only inform us about entering
a function which can be easily achieved with ftrace or kprobe. As
tun_debug() is no-op unless TUN_DEBUG is set which requires editing the
source and recompiling, setting up ftrace or kprobe is easier. Drop these
debug statements.

Also drop the tun_debug() statement informing about SIOCSIFHWADDR ioctl.
We can monitor these through rtnetlink and it makes little sense to log
address changes through ioctl but not changes through rtnetlink. Moreover,
this tun_debug() is called even if the actual address change fails which
makes it even less useful.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This macro is no-op unless TUN_DEBUG is defined (which requires editing and
recompiling the source) and only does something if variable debug is 2 but
that variable is zero initialized and never set to anything else. Moreover,
the only use of the macro informs about entering function tun_chr_open()
which can be easily achieved using ftrace or kprobe.

Drop DBG1() macro, its only use and global variable debug.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The comment above tun_flow_save_rps_rxhash() starts with "/**" which
makes it look like kerneldoc comment and results in warnings when
building with W=1. Fix the format to make it look like a normal comment.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the newly added pci_get_dsn() function for obtaining the 64-bit
Device Serial Number in the nfp6000_read_serial and
nfp_6000_get_interface functions.

pci_get_dsn() reports the Device Serial number as a u64 value created by
combining two pci_read_config_dword functions. The lower 16 bits
represent the device interface value, and the next 48 bits represent the
serial value. Use put_unaligned_be32 and put_unaligned_be16 to convert
the serial value portion into a Big Endian formatted serial u8 array.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The original code used a simple for-loop to read the bytes in order into
a buffer one byte at a time.

The pci_get_dsn() function returns the DSN as a u64, correctly ordering
the upper and lower 32 bit dwords. Simplify the display code by using
%016llX to display the u64 DSN.

This should have equivalent behavior on both Little and Big Endian
systems. The bus will have correctly ordered the dwords in the CPU
endian format, while pci_get_dsn() will correctly order the lower and
higher dwords into a u64.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The pci_get_dsn() function will perform two pci_read_config_dword calls
to read the lower and upper config dwords. It bitwise ORs them into
a u64 value. Instead of using put_unaligned_le32 to convert the value to
LE32 format, just use the %016llX printf specifier. This will print the
u64 correct, putting the most significant byte of the value first. Since
pci_get_dsn() correctly orders the two dwords into a u64, this should
produce equivalent results in less code.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

The original code used a for-loop that looped over each of the 8 bytes
and copied them into a temporary buffer. pci_get_dsn() uses two calls to
pci_read_config_dword, and correctly bitwise ORs them into a u64. Thus,
we can simplify the snprintf significantly using %016llX on a u64 value.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().

Use of put_unaligned_le64 should be correct. pci_get_dsn() will perform
two pci_read_config_dword calls. The first dword will be placed in the
first 32 bits of the u64, while the second dword will be placed in the
upper 32 bits of the u64.

On Little Endian systems, the least significant byte comes first, which
will be the least significant byte of the first dword, followed by the
least significant byte of the second dword. Since the _le32 variations
do not perform byte swapping, we will correctly copy the dwords into the
dsn[] array in the same order as before.

On Big Endian systems, the most significant byte of the second dword
will come first. put_unaligned_le64 will perform a CPU_TO_LE64, which
will swap things correctly before copying. This should also end up with
the correct bytes in the dsn[] array.

While at it, fix a small typo in the netdev_info error message when the
DSN cannot be read.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several device drivers read their Device Serial Number from the PCIe
extended config space.

Introduce a new helper function, pci_get_dsn(). This function reads the
eight bytes of the DSN and returns them as a u64. If the capability does not
exist for the device, the function returns 0.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We already have a function called page_offset(), and this macro
is unused, so just delete it.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi
hypervisor. The driver attaches to a VMware virtual device called
"precision clock" that provides a mechanism for querying host system time.
Similar to existing virtual PTP clock drivers (e.g. ptp_kvm), ptp_vmw
utilizes the kernel's PTP hardware clock API to implement a clock device
that can be used as a reference in Chrony for synchronizing guest time with
host.

The driver is only applicable to x86 guests running in VMware virtual
machines with precision clock virtual device present. It uses a VMware
specific hypercall mechanism to read time from the device.
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NVivek Thampi <vithampi@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in this function,‘ret’ is always assigned,so this's definition
'ret = 0' make no sense.
Signed-off-by: Ntangbin <tangbin@cmss.chinamobile.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two peculiarities about offloading FIFO:

- sometimes the qdisc has an unspecified handle (it is "invisible")
- it may be created before the qdisc that it will be a child of

These features make the offload a bit more tricky. The approach chosen in
this patch is to make note of all the FIFOs that needed to be rejected
because their parents were not known. Later when the parent is created,
they are offloaded

FIFO is only offloaded for its counters, queue length is ignored.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PRIO and ETS will need to check the value of qdisc handle in their
handlers. Add it to the callback and propagate through.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to have a tidy structure where to put information related to Qdisc
offloads, introduce a new structure. Move there the two existing pieces of
data: root_qdisc and tclass_qdiscs. Embed them directly, because there's no
reason to go through pointer anymore. Convert users, update init/fini
functions.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
As a side effect of these changes the error code for
unsupported params changes from EINVAL to EOPNOTSUPP.

v2: correctly handle rx-frames (and adjust the commit msg)
v3: adjust commit message for new error code and member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

v3: adjust commit message for new member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

v3: adjust commit message for new member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

v3: adjust commit message for new member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
As a side effect of these changes the info message about
the bad parameter will no longer be printed. We also
always reject the tx_coalesce_usecs_high param, even
if the target queue pair does not have a TX queue.
Error code changes from EINVAL to EOPNOTSUPP.

v2: allow adaptive TX
v3: adjust commit message for new error code and member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Reviewed-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
No functional changes.

v3: adjust commit message for new error code and member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
As a side effect of these changes the error code for
unsupported params changes from EINVAL to EOPNOTSUPP.

v3: adjust commit message for new error code and member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
No functional changes.

v3: adjust commit message for new error code and member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
No functional changes.

v3: adjust commit message for new error code and member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
The error code changes from EINVAL to EOPNOTSUPP.

v3: adjust commit message for new error code and member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver correctly rejects all unsupported parameters.
We are only losing the error print.

v3: adjust commit message for new error code and member name
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the current code, rmnet_register_real_device() and rmnet_newlink()
are using GFP_ATOMIC.
But, these functions are allowed to sleep.
So, GFP_KERNEL can be used.
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When rmnet netlink command fails, it doesn't print any error message.
So, users couldn't know the exact reason.
In order to tell the exact reason to the user, the extack error message
is used in this patch.
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the current rmnet code, there is no module alias.
So, RTNL couldn't load rmnet module automatically.

Test commands:
    ip link add dummy0 type dummy
    modprobe -rv rmnet
    ip link add rmnet0 link dummy0 type rmnet  mux_id 1
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Place the 88x3310 into powersaving mode when probing, which saves 600mW
per PHY. For both PHYs on the Macchiatobin double-shot, this saves
about 10% of the board idle power.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the energy detect power down tunable, which saves
around 600mW when the link is down. The 88x3310 supports off, rx-only
and NLP every second. Enable EDPD by default for 88x3310.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for controlling the MDI-X state of the PHY.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use new constant PCI_STATUS_ERROR_BITS to simplify the code.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use new PCI core constant PCI_STATUS_ERROR_BITS to simplify the code.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>