kobject_add() and kobject_del() don't emit hotplug events anymore. Do it
ourselves if we are finished populating the device directory.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

kobject_add() and kobject_del() don't emit hotplug events anymore. Do it
ourselves if we are finished populating the device directory.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

kobject_add() and kobject_del() don't emit hotplug events anymore. Do it
ourselves if we are finished populating the device directory.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

kobject_add() and kobject_del() don't emit hotplug events anymore.
The user should do it itself if it has finished populating the device
directory.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- Fix prototypes for debugfs functions (in configurations where
  debugfs is disabled).
Signed-off-by: NMichal Ostrowski <mostrows@speakeasy.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The current <linux/debugfs.h> include file is a little fragile in that
it is not self-contained and hence may cause compile warnings or
errors depending on the files included before it, the kernel config
and the architecture.  This patch makes things a little more robust by:

 - including <linux/types.h> to get definitions of u32, mode_t, and so on.
 - forward declaring struct file_operations.
 - including <linux/err.h> when CONFIG_DEBUG_FS is not set

The last change is particularly useful, as a kernel developer is
likely to build with debugfs always enabled and never see the build
breakage cased if debugfs is disabled.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Without the attached patch, the ver_linux script gives
the following if udev utils are not present.

./scripts/ver_linux: line 90: udevinfo: command not found

The patch causes ver_linux to be silent in the case of
no udevinfo command.
Signed-off-by: NSteven Cole <elenstev@mesatop.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

platform_add_devices can be used from within modules, so it should be
exported.  This can for example happen if you have hotpluggable firmware in
an FPGA on a system on chip processor; in our case the FPGA is probed for
devices and the FPGA base code registers the devices it has found with the
kernel.  

(akpm: I think this is reasonable from a licensing POV: it's unlikely that
anyone would be interested in merging such specialised modules into mainline,
and it's a GPL export).
Signed-off-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs: allow changing the permissions for already created attributes
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On Tue, 2005-03-15 at 09:25 +0100, Hannes Reinecke wrote:
> The current implementation of the firmware class breaks a fundamental
> assumption in udevd: that the physical device can be initialised fully
> prior to executing the next event for that device.

Here we add a TIMEOUT value to the hotplug environment of the firmware
requesting event. I will adapt udevd not to wait for anything else, if
it finds a TIMEOUT key.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add some documentation for krefs.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the missing arch/arm/lib/bitops.h file.

Like Alpha, sparc64's struct stat was defined before we had the
nanosecond et al.  fields added.  So like Alpha I have to cons up a
struct stat64 to get this stuff.  I'll work on the glibc bits soon. 

Also, we were forgetting to fill in the nanosecond fields in the sparc
compat stat64 syscalls. 
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

Done with "git-pull-script rsync://www.parisc-linux.org/~jejb/scsi-rc-fixes-2.6.git"
together with an automated content merge.

Now that we export all the parameters, this is easy to do.
It also means that we can dump about 2000 lines of code that
were dedicated to doing this internally.

Additionally, this removes all the aic7xxx driver abuse
of SCSI timers which were embedded in the DV routines.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This is just a simplistic patch to export all of the
aic7xxx internal transport parameters via the SPI
transport class.  It doesn't actually alter the way the
driver works at all.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

  CC [M]  drivers/scsi/qla2xxx/qla_attr.o
drivers/scsi/qla2xxx/qla_attr.c: In function `qla2x00_sysfs_write_fw_dump':
drivers/scsi/qla2xxx/qla_attr.c:65: warning: implicit declaration of function `vfree'
drivers/scsi/qla2xxx/qla_attr.c:83: warning: implicit declaration of function `vmalloc'
drivers/scsi/qla2xxx/qla_attr.c:83: warning: cast to pointer from integer of different size
 
Also remove spurious inclusion of linux/version.h
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From: 	James.Smart@Emulex.Com

Modified for kernel import and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch contains the following cleanups:
- make some needlessly global functions static
- remove one more kernel 2.2 #ifdef
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

these have been wrappers for the generic dma direction bits since 2.5.x.
This patch converts the few remaining drivers and removes the macros.

Arjan noticed there's some hunk in here that shouldn't.  Updated patch
below:
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove /proc support.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

  Don't use cmd->request->nr_hw_segments as it may not be initialized
  (SG_IO in particular bypasses anything that initializes this and just
  uses scsi_do_req to insert a scsi_request directly on the head of the
  queue) and a bogus value here can trip up the checks to make sure that
  the number of segments will fit in the queue ring buffer, resulting in
  commands that are never completed.

  Fix up several issues with PCI DMA mapping and failure to check return
  values on the mappings.

  Make the check for space in the ring buffer happen after the DMA mapping
  is done since any checks done before the mapping has taken place are
  bogus.

  Doug Ledford <dledford@redhat.com>.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove internal lun discovery routines and support
structures.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Add initial support for FC remote port infrastructure.

     o Use fc_remote_port...() registration and block/unlock
       functions.
     o Consolidate 'attribute' (fc-remote/sysfs) helpers into
       new qla_attr.c file.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove internal command queuing from the driver.  As is, this
driver cannot tolerate cable-pulls as I/Os will begin to fail
by the upper layers.

     o Should be used in conjuction with the
       11-fc_rport_adds_2.diff patch.
     o Removes qla_listops.h file -- no longer needed.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds 32-bit compatibility for mounting an NFSv4 mount on a 64-bit
kernel (such as happens with PPC64). 

The problem is that the mount data for the NFS4 mount process includes
auxilliary data pointers, probably because the NFS4 mount data may
conceivably exceed PAGE_SIZE in size - thus breaking against the hard
limit imposed by sys_mount(). 
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a deadlock on the dcache lock detected during testing at IBM
by moving the logging of the current executable information from the
SELinux avc_audit function to audit_log_exit (via an audit_log_task_info
helper) for processing upon syscall exit. 

For consistency, the patch also removes the logging of other
task-related information from avc_audit, deferring handling to
audit_log_exit instead. 

This allows simplification of the avc_audit code, allows the exe
information to be obtained more reliably, always includes the comm
information (useful for scripts), and avoids including bogus task
information for checks performed from irq or softirq. 
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch makes scsi_send_eh_cmnd() use sdev and shost instead of
referencing them through scmd-> everytime.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch removes volatile qualifier from scsi_device->device_busy,
Scsi_Host->host_busy and ->host_failed as the volatile qualifiers
don't serve any purpose now.  While at it, convert those fields from
unsigned short to unsigned int as suggested by Christoph.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

We have a DID_IMM_RETRY to require a retry at once, but we could do with
a DID_REQUEUE to instruct the mid-layer to treat this command in the
same manner as QUEUE_FULL or BUSY (i.e. halt the submission until
another command returns ... or the queue pressure builds if there are no
outstanding commands).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From: Andreas Herrmann <aherrman@de.ibm.com>

This patch mainly introduces support for point-2-point
topology.

From: Heiko Carstens <heiko.carstens@de.ibm.com>
From: Maxim Shchetynin <maxim@de.ibm.com>
From: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>