The last stage of the GuC loader also sanitises the GuC submission
settings, so should be called unconditionally (even on platforms
without a GuC) to ensure consistent settings; in particular, this
prevents any attempt to use GuC submission on GuCless platforms!

Also fix error path handling and clarify DRM_INFO fallback message.
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Kernel only need to add a register to HW whitelist, required for a
preemption related issue.

Reference: HSD#2131039
Reviewed-by: NJeff McGee <jeff.mcgee@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465203169-16591-1-git-send-email-arun.siluvery@linux.intel.com

Just a bunch of stale kerneldocs generating warnings when
building the docs. Mostly function parameters so not very
useful but still.

v2: Tidy.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464958937-23344-1-git-send-email-tvrtko.ursulin@linux.intel.com

Fix the failure mode where the display appears split, or shifted about
2/3 of the screen, and the color components are cycled. Turns out we
were missing the crucial BXT_DEFEATURE_DPI_FIFO_CTR bit in the
EOT_DISABLE register.

Per bspec, with the bit set, the "mipi_dpf_vblank_start" signal is
asserted only when the complete frame is transferred in the DPHY line
and also the DPI FIFO is flushed out at the end of each frame.

The problem was mitigated by keeping the panel fitter enabled, but that
only limited the issue to a shift of about 0..10 pixels. With the fix
here, the panel fitter workaround does not seem to be needed at all.

While at it, set BXT_DPHY_DEFEATURE_EN in EOT_DISABLE register which is
also needed per the BXT DSI mode set sequence.

Issue: VIZ-7610
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464965825-31035-1-git-send-email-jani.nikula@intel.com

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The VBT has these mysterious H/V image sizes as part of the display
timings. Looking at some dumps those appear to be the physical
dimensions in mm. Which makes sense since the timing descriptor matches
the format used by EDID detailed timing descriptor, which defines these
as "H/V Addressable Video Image Size in mm".

So let's use that information from the panel fixed mode to get the
physical dimensions for LVDS/eDP/DSI displays. And with that we can
fill out the display_info so that userspace can get at it via
GetConnector.

v2: Use (hi<<8)|lo instead of broken (hi<<4)+lo
    Handle LVDS and eDP too

Cc: Stephen Just <stephenjust@gmail.com>
Tested-by: NStephen Just <stephenjust@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96255Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464685714-30507-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NMika Kahola <mika.kahola@intel.com>

My old 845g complains that the child_device_size inside its VBT,
version 110, is incorrect. Let's fiddle with the version matching such
that it works with this VBT (i.e. treat BIOS v110 as having the same size
as v108).

Fixes [drm:intel_bios_init] *ERROR* Unexpected child device config
size 27 (expected 33 for VBT version 110)

Whether this is correct, no one knows - but it works for this particular
machine.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464800923-6054-1-git-send-email-chris@chris-wilson.co.uk

Git got absolutely destroyed with all our cherry-picking from
drm-intel-next-queued to various branches. It ended up inserting
intel_crtc_page_flip 2x even in intel_display.c.

Backmerge to get back to sanity.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

drm-intel-next-2016-05-22:
- cmd-parser support for direct reg->reg loads (Ken Graunke)
- better handle DP++ smart dongles (Ville)
- bxt guc fw loading support (Nick Hoathe)
- remove a bunch of struct typedefs from dpll code (Ander)
- tons of small work all over to avoid casting between drm_device and the i915
  dev struct (Tvrtko&Chris)
- untangle request retiring from other operations, also fixes reset stat corner
  cases (Chris)
- skl atomic watermark support from Matt Roper, yay!
- various wm handling bugfixes from Ville
- big pile of cdclck rework for bxt/skl (Ville)
- CABC (Content Adaptive Brigthness Control) for dsi panels (Jani&Deepak M)
- nonblocking atomic commits for plane-only updates (Maarten Lankhorst)
- bunch of PSR fixes&improvements
- untangle our map/pin/sg_iter code a bit (Dave Gordon)
drm-intel-next-2016-05-08:
- refactor stolen quirks to share code between early quirks and i915 (Joonas)
- refactor gem BO/vma funcstion (Tvrtko&Dave)
- backlight over DPCD support (Yetunde Abedisi)
- more dsi panel sequence support (Jani)
- lots of refactoring around handling iomaps, vma, ring access and related
  topics culmulating in removing the duplicated request tracking in the execlist
  code (Chris & Tvrtko) includes a small patch for core iomapping code
- hw state readout for bxt dsi (Ramalingam C)
- cdclk cleanups (Ville)
- dedupe chv pll code a bit (Ander)
- enable semaphores on gen8+ for legacy submission, to be able to have a direct
  comparison against execlist on the same platform (Chris) Not meant to be used
  for anything else but performance tuning
- lvds border bit hw state checker fix (Jani)
- rpm vs. shrinker/oom-notifier fixes (Praveen Paneri)
- l3 tuning (Imre)
- revert mst dp audio, it's totally non-functional and crash-y (Lyude)
- first official dmc for kbl (Rodrigo)
- and tons of small things all over as usual

* 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel: (194 commits)
  drm/i915: Revert async unpin and nonblocking atomic commit
  drm/i915: Update DRIVER_DATE to 20160522
  drm/i915: Inline sg_next() for the optimised SGL iterator
  drm/i915: Introduce & use new lightweight SGL iterators
  drm/i915: optimise i915_gem_object_map() for small objects
  drm/i915: refactor i915_gem_object_pin_map()
  drm/i915/psr: Implement PSR2 w/a for gen9
  drm/i915/psr: Use ->get_aux_send_ctl functions
  drm/i915/psr: Order DP aux transactions correctly
  drm/i915/psr: Make idle_frames sensible again
  drm/i915/psr: Try to program link training times correctly
  drm/i915/userptr: Convert to drm_i915_private
  drm/i915: Allow nonblocking update of pageflips.
  drm/i915: Check for unpin correctness.
  Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates"
  drm/i915: Make unpin async.
  drm/i915: Prepare connectors for nonblocking checks.
  drm/i915: Pass atomic states to fbc update functions.
  drm/i915: Remove reset_counter from intel_crtc.
  drm/i915: Remove queue_flip pointer.
  ...

Frist -misc pull for 4.8, with pretty much just random all over plus a few
more lockless gem BO patches acked/reviewed by driver maintainers.

I'm starting a bit earlier this time around because there's a few invasive
patch series to land (nonblocking atomic prep work, fence prep work,
rst/sphinx kerneldoc finally happening) and I need a baseline with all the
branches merged.

* tag 'topic/drm-misc-2016-06-01' of git://anongit.freedesktop.org/drm-intel: (21 commits)
  drm/vc4: Use lockless gem BO free callback
  drm/vc4: Use drm_gem_object_unreference_unlocked
  drm: Initialize a linear gamma table by default
  drm/vgem: Use lockless gem BO free callback
  drm/qxl: Don't set a gamma table size
  drm/msm: Nuke dummy gamma_set/get functions
  drm/cirrus: Drop redundnant gamma size check
  drm/fb-helper: Remove dead code in setcolreg
  drm/mediatek: Use lockless gem BO free callback
  drm/hisilicon: Use lockless gem BO free callback
  drm/hlcd: Use lockless gem BO free callback
  vga_switcheroo: Support deferred probing of audio clients
  vga_switcheroo: Add helper for deferred probing
  virtio-gpu: fix output lookup
  drm/doc: Unify KMS Locking docs
  drm/atomic-helper: Do not call ->mode_fixup for CRTC which will be disabled
  Fix annoyingly awkward typo in drm_edid_load.c
  drm/doc: Drop vblank_disable_allow wording
  drm: use seqlock for vblank time/count
  drm/mm: avoid possible null pointer dereference
  ...

if downscaling is enabled plane data rate increases according to scaling
amount. take scaling amount under consideration while calculating plane
data rate

v2: Address Matt's comments, where data rate was overridden because of
missing else.

v3 (by Matt):
 - Add braces to 'else' branch to match kernel coding style
 - Adjust final calculation now that skl_plane_downscale_amount()
   returns 16.16 fixed point value instead of a decimal fixed point

v4 (by Matt):
 - Avoid integer overflow by making sure final multiplication is
   treated as 64-bit.

Cc: matthew.d.roper@intel.com
Signed-off-by: NKumar, Mahesh <mahesh1.kumar@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NKumar Mahesh <mahesh1.kumar@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463695381-21368-1-git-send-email-matthew.d.roper@intel.com

Don't use pipe pixel rate for plane pixel rate. Calculate plane pixel according
to formula

adjusted plane_pixel_rate = adjusted pipe_pixel_rate * downscale ammount

downscale amount = max[1, src_h/dst_h] * max[1, src_w/dst_w]
if 90/270 rotation use rotated width & height

v2: use intel_plane_state->visible instead of (fb == NULL) as per Matt's
    comment.

v3 (by Matt):
 - Keep downscale amount in 16.16 fixed point rather than converting to
   decimal fixed point.
 - Store adjusted plane pixel rate in plane state instead of the plane
   parameters structure that we no longer use.

v4 (by Matt):
 - Significant rebasing onto latest atomic watermark work
 - Don't bother storing plane pixel rate in state; just calculate it
   right before the calls that make use of it.
 - Fix downscale calculations to actually use width values when
   computing downscale_w rather than copy/pasted height values.

Cc: matthew.d.roper@intel.com
Signed-off-by: NKumar, Mahesh <mahesh1.kumar@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NKumar Mahesh <mahesh1.kumar@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463439121-28974-4-git-send-email-matthew.d.roper@intel.com

don't always use 8 ddb as minimum, instead calculate using proper
algorithm.

v2: optimizations as per Matt's comments.

v3 (by Matt):
 - Fix boolean logic for !fb test in skl_ddb_min_alloc()
 - Adjust negative tiling format comparisons in skl_ddb_min_alloc() to
   improve readability.

v4 (by Matt):
 - Rebase onto recent atomic watermark changes
 - Slight tweaks to code flow to make the logic more closely match the
   description in the bspec.

v5 (by Matt):
 - Handle minimum scanline calculation properly for 4 & 8 bpp formats.
   8bpp isn't actually possible right now, but it's listed in the bspec
   so I've included it here for forward compatibility (similar to how
   we have logic for NV12).

v6 (by Matt):
 - Calculate plane_bpp correctly for non-NV12 formats. (Mahesh)

Cc: matthew.d.roper@intel.com
Signed-off-by: NKumar, Mahesh <mahesh1.kumar@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NKumar Mahesh <mahesh1.kumar@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464713939-10440-1-git-send-email-matthew.d.roper@intel.com

We don't actually read out full plane state during driver startup (only
whether the primary plane is enabled/disabled), so all of the src/dest
rectangles are invalid at this point.  However this calculation was
needless anyway since we re-calculate them from scratch on the very
first atomic transaction after boot anyway.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NKumar Mahesh <mahesh1.kumar@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463439121-28974-2-git-send-email-matthew.d.roper@intel.com

If the VBT says that a certain port should be eDP (and hence fused off
from HDMI), but in reality it isn't, we need to try and acquire the HDMI
connection instead. So only trust the VBT edp setting if we can connect
to an eDP device on that port.

Fixes: d2182a66 (drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV)
References: https://bugs.freedesktop.org/show_bug.cgi?id=96288Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NPhidias Chiang <phidias.chiang@canonical.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464766070-31623-1-git-send-email-chris@chris-wilson.co.uk

This reverts the following patches:

d55dbd06 drm/i915: Allow nonblocking update of pageflips.
15c86bdb drm/i915: Check for unpin correctness.
95c2ccdc Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates"
a6747b73 drm/i915: Make unpin async.
03f476e1 drm/i915: Prepare connectors for nonblocking checks.
2099deff drm/i915: Pass atomic states to fbc update functions.
ee7171af drm/i915: Remove reset_counter from intel_crtc.
2ee004f7 drm/i915: Remove queue_flip pointer.
b8d2afae drm/i915: Remove use_mmio_flip kernel parameter.
8dd634d9 drm/i915: Remove cs based page flip support.
143f73b3 drm/i915: Rework intel_crtc_page_flip to be almost atomic, v3.
84fc494b drm/i915: Add the exclusive fence to plane_state.
6885843a drm/i915: Convert flip_work to a list.
aa420ddd drm/i915: Allow mmio updates on all platforms, v2.
afee4d87 Revert "drm/i915: Avoid stalling on pending flips for legacy cursor updates"

"drm/i915: Allow nonblocking update of pageflips" should have been
split up, misses a proper commit message and seems to cause issues in
the legacy page_flip path as demonstrated by kms_flip.

"drm/i915: Make unpin async" doesn't handle the unthrottled cursor
updates correctly, leading to an apparent pin count leak. This is
caught by the WARN_ON in i915_gem_object_do_pin which screams if we
have more than DRM_I915_GEM_OBJECT_MAX_PIN_COUNT pins.

Unfortuantely we can't just revert these two because this patch series
came with a built-in bisect breakage in the form of temporarily
removing the unthrottled cursor update hack for legacy cursor ioctl.
Therefore there's no other option than to revert the entire pile :(

There's one tiny conflict in intel_drv.h due to other patches, nothing
serious.

Normally I'd wait a bit longer with doing a maintainer revert, but
since the minimal set of patches we need to revert (due to the bisect
breakage) is so big, time is running out fast. And very soon
(especially after a few attempts at fixing issues) it'll be really
hard to revert things cleanly.

Lessons learned:
- Not a good idea to rush the review (done by someone fairly new to
  the area) and not make sure domain experts had a chance to read it.

- Patches should be properly split up. I only looked at the two
  patches that should be reverted in detail, but both look like the
  mix up different things in one patch.

- Patches really should have proper commit messages. Especially when
  doing more than one thing, and especially when touching critical and
  tricky core code.

- Building a patch series and r-b stamping it when it has a built-in
  bisect breakage is not a good idea.

- I also think we need to stop building up technical debt by
  postponing atomic igt testcases even longer. I think it's clear that
  there's enough corner cases in this beast that we really need to
  have the testcases _before_ the next step lands.

(cherry picked from commit 5a21b665
from drm-intel-next-queeud)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Acked-by: NJani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

On Loading, GuC sets PM interrupts routing (bit 31) and clears ARAT
expired interrupt (bit 9). Host turbo also updates this register
in RPS flows. This patch ensures bit 31 and bit 9 setup by GuC persists.
ARAT timer interrupt is needed in GuC for various features. It also
facilitates halting GuC and hence achieving RC6. PM interrupt routing
will not impact RPS interrupt reception by host as GuC will redirect
them.
This patch fixes igt test pm_rc6_residency that was failing with guc
load/submission enabled. Tested with SKL GuC v6.1 and BXT GuC v5.1 and v8.7.

v2: i915_irq/i915_pm decoupling from intel_guc. (ChrisW)

v3: restructuring the mask update and rebase w.r.t Ville's patch. (ChrisW)

v4: Updating the pm_intr_keep during direct_interrupts_to_guc. (Sagar)

Cc: Chris Harris <chris.harris@intel.com>
Cc: Zhe Wang <zhe1.wang@intel.com>
Cc: Deepak S <deepak.s@intel.com>
Cc: Satyanantha, Rama Gopal M <rama.gopal.m.satyanantha@intel.com>
Cc: Akash Goel <akash.goel@intel.com>
Testcase: igt/pm_rc6_residency
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Tested-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464683307-19475-1-git-send-email-sagar.a.kamble@intel.com

No dev->struct_mutex anywhere to be seen.

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-16-git-send-email-daniel.vetter@ffwll.ch

Since my last struct_mutex crusade someone escaped!

This already has the advantage that for the common case when someone
else holds a ref the unref won't even acquire dev->struct_mutex. And
I'm working on code to allow drivers to completely opt-out of any and
all dev->struct_mutex usage, but that only works if they use the
_unlocked variants everywhere.

v2: Drop comment too.

v3: Drop the other comment too.

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-15-git-send-email-daniel.vetter@ffwll.ch

Code stolen from gma500.

This is just a minor bit of safety code that I spotted and figured it
might be useful if we put it into the core. This is to make the
get_gamma ioctl reflect likely reality even before the first set_gamma
ioctl call.

v2 on irc: Extend commit message per Maarten's suggestions.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-2-git-send-email-daniel.vetter@ffwll.ch

No dev->struct_mutex anywhere to be seen.

Cc: seanpaul@chromium.org
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-17-git-send-email-daniel.vetter@ffwll.ch

qxl doesn't have any functions for setting the gamma table, so this is
completely defunct.

Not nice to lie to userspace, so let's stop!

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-10-git-send-email-daniel.vetter@ffwll.ch

Again the fbdev emulation gamma_set/get functions are only needed for
drivers that try to also use 8bpp paletted mode. Which msm doesn't, so
this is dead code. Let's rip it out.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-7-git-send-email-daniel.vetter@ffwll.ch

The core does this for us already.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-6-git-send-email-daniel.vetter@ffwll.ch

DRM fbdev emulation only supports pallete_color with depth == 8, and
truecolor with depth > 8. Handling depth == 16 for palettes is hence
dead code, let's remove it.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-3-git-send-email-daniel.vetter@ffwll.ch

No dev->struct_mutex anywhere to be seen.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-28-git-send-email-daniel.vetter@ffwll.ch

No dev->struct_mutex anywhere to be seen.

Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NXinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-27-git-send-email-daniel.vetter@ffwll.ch

No dev->struct_mutex anywhere to be seen.

Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-26-git-send-email-daniel.vetter@ffwll.ch

Daniel Vetter pointed out that vga_switcheroo_client_probe_defer() could
be needed by audio clients as well. To avoid mistakes when someone adds
conditions for these in the future, constrain the single existing
condition to VGA clients by checking for PCI_BASE_CLASS_DISPLAY. This
encompasses both PCI_CLASS_DISPLAY_VGA as well as PCI_CLASS_DISPLAY_3D,
which is used by some Nvidia Optimus GPUs.

Any future checks for audio clients should then be constrained to
PCI_BASE_CLASS_MULTIMEDIA.

v6: Spun out from commit introducing vga_switcheroo_client_probe_defer()
    to keep it a pure refactoring change. (Emil Velikov, Jani Nikula)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/358d58490eb9dda5f270d844b0dce511a2a20828.1464685538.git.lukas@wunner.de

So far we've got one condition when DRM drivers need to defer probing
on a dual GPU system and it's coded separately into each of the relevant
drivers. As suggested by Daniel Vetter, deduplicate that code in the
drivers and move it to a new vga_switcheroo helper. This yields better
encapsulation of concepts and lets us add further checks in a central
place. (The existing check pertains to pre-retina MacBook Pros and an
additional check is expected to be needed for retinas.)

One might be tempted to check deferred probing conditions in
vga_switcheroo_register_client(), but this is usually called fairly late
during driver load. The GPU is fully brought up and ready for switching
at that point. On boot the ->probe hook is potentially called dozens of
times until it finally succeeds, and each time we'd repeat bringup and
teardown of the GPU, lengthening boot time considerably and cluttering
logfiles. A separate helper is therefore needed which can be called
right at the beginning of the ->probe hook.

Note that amdgpu currently does not call this helper as the AMD GPUs
built into MacBook Pros are only supported by radeon so far.

v2: This helper could eventually be used by audio clients as well,
    so rephrase kerneldoc to refer to "client" instead of "GPU"
    and move the single existing check in an if block specific
    to PCI_CLASS_DISPLAY_VGA devices. Move documentation on
    that check from kerneldoc to a comment. (Daniel Vetter)

v3: Mandate in kerneldoc that registration of client shall only
    happen after calling this helper. (Daniel Vetter)

v4: Rebase on 412c8f7d ("drm/radeon: Return -EPROBE_DEFER when
    amdkfd not loaded")

v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are
    matched as well. (Emil Velikov)

v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be
    considered a functional change. Move to a separate commit to
    keep this a pure refactoring change. (Emil Velikov, Jani Nikula)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de

Needed for multihead setups where we can have disabled
outputs and therefore plane->crtc can be NULL.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464609806-22013-1-git-send-email-kraxel@redhat.com

Stop yelling the plane type. "STANDARD" doesn't mean anything anyway.
Let's just use the plane name here.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464371966-15190-8-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Rather than let the core generate usless encoder names, let's pass in
something that actually identifies the piece of hardware we're dealing
with.

v2: Use 'DSI %c' instead of 'MIPI %c' for DSI encoders (Jani)
v3: Use port_name() in DSI code since we have it
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464371966-15190-7-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Let's name our planes in a way that makes sense wrt. the spec:
- skl+ -> "plane 1A", "plane 2A", "plane 1C", "cursor A" etc.
- g4x+ -> "primary A", "primary B", "sprite A", "cursor C" etc.
- pre-g4x -> "plane A", "cursor B" etc.

v2: Rebase on top of the fixed/cleaned error paths
    Use a local 'name' variable to make things easier
v3: Pass the name as a function argument to drm_universal_plane_init() (Jani)
v3: Pass the printf style string to drm_universal_plane_init()
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464371966-15190-6-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Call intel_plane_destroy() instead of drm_plane_cleanup() so that we
also free the plane struct itself when bailing out of the crtc init.

And make intel_plane_destroy() NULL tolerant to avoid having to check
for it in the caller.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464371966-15190-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

v2: Fix intel_crtc leak on failure to allocate the name
    Use a local 'name' variable to make things easier
v3: Pass the name as a function arguemnt to drm_crtc_init_with_planes() (Jani)
v4: Pass the printf style format string to drm_crtc_init_with_planes()
v5: Drop spurious code changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464371966-15190-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

We have plane->name, so let's use that in debug messages instead
of just printing the more or less useless object ID.

v2: slap on a commit message
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464371966-15190-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

We have crtc->name, so let's use that in debug messages instead
of just printing the more or less useless object ID.

v2: Rebased due to intel_dpll_mgr.c, slap on a commit message
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464371966-15190-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NJani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464599449-12509-1-git-send-email-daniel.vetter@ffwll.ch

When a CRTC is going to be disabled, it's state may contain a display mode
with zeroed content.  This could be reproduced by HDMI cable hotplug out
operation with legacy fbdev support in dual display cases.  It would confuse
driver's CRTC callback ->mode_fixup and make the total state be rejected.
So, let's don't call the callback for the CRTC.
Signed-off-by: NLiu Ying <gnuiyl@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464341754-7087-1-git-send-email-gnuiyl@gmail.com