Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 01 4月, 2016 2 次提交
  3. 31 3月, 2016 1 次提交
  5. 28 3月, 2016 1 次提交
  7. 23 3月, 2016 4 次提交
  9. 21 3月, 2016 1 次提交
  11. 20 3月, 2016 2 次提交
    • V
      ALSA: usb-audio: add Microsoft HD-5001 to quirks · 0ef21100
      由 Victor Clément 提交于 
      The Microsoft HD-5001 webcam microphone does not support sample rate
reading as the HD-5000 one.
This results in dmesg errors and sound hanging with pulseaudio.
Signed-off-by: NVictor Clément <victor.clement@openmailbox.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      0ef21100
    • T
      ALSA: hda - Workaround for unbalanced i915 power refcount by concurrent probe · 7169701a
      由 Takashi Iwai 提交于 
      The recent addition of on-demand i915 audio component binding in the
codec driver seems leading to the unbalanced i915 power refcount,
according to Intel CI tests.  Typically, it gets a kernel WARNING
like:
  WARNING: CPU: 3 PID: 173 at sound/hda/hdac_i915.c:91 snd_hdac_display_power+0xf1/0x110 [snd_hda_core]()
  Call Trace:
   [<ffffffff813fef15>] dump_stack+0x67/0x92
   [<ffffffff81078a21>] warn_slowpath_common+0x81/0xc0
   [<ffffffff81078b15>] warn_slowpath_null+0x15/0x20
   [<ffffffffa00f77e1>] snd_hdac_display_power+0xf1/0x110 [snd_hda_core]
   [<ffffffffa015039d>] azx_intel_link_power+0xd/0x10 [snd_hda_intel]
   [<ffffffffa011e32a>] azx_link_power+0x1a/0x30 [snd_hda_codec]
   [<ffffffffa00f21f9>] snd_hdac_link_power+0x29/0x40 [snd_hda_core]
   [<ffffffffa01192a6>] hda_codec_runtime_suspend+0x76/0xa0 [snd_hda_codec]
   .....

The scenario is like below:
- HD-audio driver and i915 driver are probed concurrently at the
  (almost) same time; HDA bus tries to bind with i915, but it fails
  because i915 initialization is still being processed.
- Later on, HD-audio probes the HDMI codec, where it again tries to
  bind with i915.  At this time, it succeeds.
- At finishing the probe of HDA, it decreases the refcount as if it
  were already bound at the bus probe, since the component is bound
  now.  This triggers a kernel WARNING due to the unbalance.

As a workaround, in this patch, we just disable the on-demand i915
component binding in the codec driver.  This essentially reverts back
to the state of 4.4 kernel.

We know that this is no real solution, but it's a minimalistic simple
change that can be applied to 4.5.x kernel as stable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94566Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      7169701a
  13. 19 3月, 2016 2 次提交
  15. 18 3月, 2016 1 次提交
    • T
      ALSA: hda - Really restrict i915 notifier to HSW+ · 691be973
      由 Takashi Iwai 提交于 
      The commit [b62232d4: ALSA: hda - Limit i915 HDMI binding only for
HSW and later] tried to limit the usage of i915 audio notifier to the
recent Intel models and switch to the old method on pre-Haswell
models.  However, it assumed that the i915 component binding hasn't
been done on such models, and the assumption was wrong: namely,
Baytrail had already the i915 component binding due to powerwell
control.  Thus, the workaround wasn't applied to Baytrail.

For fixing this properly, this patch introduces a new flag indicating
the usage of audio notifier and codec_has_acomp() refers to this flag
instead of checking the existence of audio component.
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      691be973
  17. 17 3月, 2016 2 次提交
    • T
      ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug · 222bde03
      由 Takashi Iwai 提交于 
      The recent change in HD-audio HDMI/DP codec driver for allowing the
dynamic PCM binding introduced a new spec->pcm_mutex.  One of the
protected area by this mutex is hdmi_present_sense().  As reported by
Intel CI tests, unfortunately, the new mutex causes a deadlock when
the hotplug/unplug is triggered during the codec is in runtime
suspend.  The buggy code path is like the following:

  hdmi_unsol_event() -> ...
    -> hdmi_present_sense()
==>     ** here taking pcm_mutex
      -> hdmi_present_sense_via_verbs()
        -> snd_hda_power_up_pm() -> ... (runtime resume calls)
          -> generic_hdmi_resume()
            -> hdmi_present_sense()
==>           ** here taking pcm_mutex again!

As we can see here, the problem is that the mutex is taken before
snd_hda_power_up_pm() call that triggers the runtime resume.  That is,
the obvious solution is to move the power up/down call outside the
mutex; it is exactly what this patch provides.

The patch also clarifies why this bug wasn't caught beforehand.  We
used to have the i915 audio component for hotplug for all Intel chips,
and in that code path, there is no power up required but the
information is taken directly from the graphics side.  However, we
recently switched back to the old method for some old Intel chips due
to regressions, and now the deadlock issue is surfaced.

Fixes: a76056f2 ('ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug')
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      222bde03
    • T
      ALSA: ctl: change return value in compatibility layer so that it's the same... · 6f021744
      由 Takashi Sakamoto 提交于 
      ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation

In control compatibility layer, when no elements are found by
ELEM_READ/ELEM_WRITE ioctl commands, ENXIO is returned. On the other hand,
in core implementation, ENOENT is returned. This is not good for
ALSA ctl applications.

This commit changes the return value from the compatibility layer so
that the same value is returned.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      6f021744
  19. 16 3月, 2016 5 次提交
  21. 15 3月, 2016 2 次提交
  23. 14 3月, 2016 5 次提交
  25. 13 3月, 2016 12 次提交