Reduces duplication and prepares for further rework
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The mt76_led_cleanup() function is called unconditionally, which
leads to a link error when CONFIG_LEDS is a loadable module or
disabled but mt76 is built-in:

drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_unregister_device':
mac80211.c:(.text+0x2ac): undefined reference to `led_classdev_unregister'

Use the same trick that is guarding the registration, using an
IS_ENABLED() check for the CONFIG_MT76_LEDS symbol that indicates
whether LEDs can be used or not.

Fixes: 36f7e2b2 ("mt76: do not use devm API for led classdev")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Move mt76_get_antenna in mac80211.c in order to be reused by all
drivers. Initialize .get_antenna function pointer for mt76x0, mt7603,
mt7615 and mt76x2u drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move interface modes declaration in common code since now mt76
chipsets support all modes (NL80211_IFTYPE_STATION, NL80211_IFTYPE_AP,
NL80211_IFTYPE_MESH_POINT and NL80211_IFTYPE_ADHOC)
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move SUPPORTS_REORDERING_BUFFER hw property configuration from chip
specific code to mt76_register_device since it is supported by all mt76
drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Avoid dereferencing invalid ids
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Read busy counters not holding cc_lock spinlock since usb read can't be
performed in interrupt context. Move cc_active and cc_rx counters out of
cc_lock since they are not modified in interrupt context.
Grab cc_lock updating cur_cc_bss_rx in mt76_airtime_report and do not
hold rx_lock in mt76_update_survey.
Moreover grab mt76 mutex in mt76_get_survey before running
mt76_update_survey. This patch fixes the following 'schedule while
atomic'

[  291.790866] BUG: scheduling while atomic: iw/2161/0x00000202
[  291.791002] Preemption disabled at:
[  291.791007] [<0000000000000000>] 0x0
[  291.791015] CPU: 0 PID: 2161 Comm: iw Tainted: G W 5.4.= 0-rc2-3-ARCH-00104-g9e208aa0 #1
[  291.791017] Hardware name: LENOVO 2349QM6/2349QM6, BIOS G1ETC2WW (2.82=) 08/07/2019
[  291.791019] Call Trace:
[  291.791042]  dump_stack+0x5c/0x80
[  291.791049]  __schedule_bug.cold+0x8e/0x9b
[  291.791055]  __schedule+0x5f8/0x770
[  291.791062]  schedule+0x43/0xd0
[  291.791068]  schedule_preempt_disabled+0x14/0x20
[  291.791074]  __mutex_lock.isra.0+0x18a/0x530
[  291.791099]  mt76u_rr+0x1f/0x40 [mt76_usb]
[  291.791113]  mt76x02_update_channel+0x22/0x40 [mt76x02_lib]
[  291.791122]  mt76_update_survey+0x42/0xe0 [mt76]
[  291.791129]  mt76_get_survey+0x2f/0x1b0 [mt76]
[  291.791170]  ieee80211_dump_survey+0x5e/0x140 [mac80211]
[  291.791217]  nl80211_dump_survey+0x13c/0x2f0 [cfg80211]
[  291.791222]  ? __kmalloc_reserve.isra.0+0x2d/0x70
[  291.791225]  ? __alloc_skb+0x96/0x1d0
[  291.791229]  netlink_dump+0x17b/0x370
[  291.791247]  __netlink_dump_start+0x16f/0x1e0
[  291.791253]  genl_family_rcv_msg+0x396/0x410
[  291.791290]  ? nl80211_prepare_wdev_dump+0x1b0/0x1b0 [cfg80211]
[  291.791297]  ? _raw_spin_unlock_irqrestore+0x20/0x40
[  291.791312]  ? __wake_up_common_lock+0x8a/0xc0
[  291.791316]  genl_rcv_msg+0x47/0x90
[  291.791320]  ? genl_family_rcv_msg+0x410/0x410
[  291.791323]  netlink_rcv_skb+0x49/0x110
[  291.791329]  genl_rcv+0x24/0x40
[  291.791333]  netlink_unicast+0x171/0x200
[  291.791340]  netlink_sendmsg+0x208/0x3d0
[  291.791358]  sock_sendmsg+0x5e/0x60
[  291.791361]  ___sys_sendmsg+0x2ae/0x330
[  291.791368]  ? filemap_map_pages+0x272/0x390
[  291.791374]  ? _raw_spin_unlock+0x16/0x30
[  291.791379]  ? __handle_mm_fault+0x112f/0x1390
[  291.791388]  __sys_sendmsg+0x59/0xa0
[  291.791396]  do_syscall_64+0x5b/0x1a0
[  291.791400]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  291.791404] RIP: 0033:0x7f5d0c7f37b7
[  291.791418] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 0=
0 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05=
 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  291.791421] RSP: 002b:00007ffe8b5d0538 EFLAGS: 00000246 ORIG_RAX: 0000= 00000000002e
[  291.791426] RAX: ffffffffffffffda RBX: 000055a038e6c390 RCX: 00007f5d0= c7f37b7
[  291.791430] RDX: 0000000000000000 RSI: 00007ffe8b5d0570 RDI: 000000000= 0000003
[  291.791434] RBP: 000055a038e718c0 R08: 000055a038e6c02a R09: 000000000= 0000002
[  291.791438] R10: 000055a03808cb00 R11: 0000000000000246 R12: 000055a03= 8e71780
[  291.791440] R13: 00007ffe8b5d0570 R14: 000055a038e717d0 R15: 000055a03= 8e718c0
[  291.791480] NOHZ: local_softirq_pending 202

Fixes: 168aea24 ("mt76: mt76x02u: enable survey support")
Tested-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

With the devm API, the unregister happens after the device cleanup is done,
after which the struct mt76_dev which contains the led_cdev has already been
freed. This leads to a use-after-free bug that can crash the system.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

It is supported by all hardware drivers now
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Acked-by: NToke Høiland-Jørgensen <toke@redhat.com>

Report tx time/rx time and obss time from hw mib counters to fill survey
info requested by mac80211
Co-developed-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Host time is used to calculate the channel active time on mt7603 and mt7615.
Use the same on mt76x02 and move the lock to core code to get rid of some
duplicated code.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Poll per-station hardware counters after tx status events
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Report total rx airtime for valid stations as BSS rx time in survey

mt7615 is left out for now, it will be supported later by reading
hardware counters instead of calculating airtime in software
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mt76_channel_state() from mt76.h to mac80211.c
Preparation for updating channel state from more places in the drivers/core
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This can be used in monitor mode to figure out which subframes were sent as
part of which A-MPDU
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

mt76_rx_convert() not need to be exported any longer.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

tx queues are already disabled by mac80211 during scanning or other
off-channel activity. There is no need to repeat the check in mt76,
since scheduled queues are selected by mac80211 as well.
Signed-off-by: NBalakrishna Bandi <b.balakrishna@globaledgesoft.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fixes use-after-free issues on forced station removal during hardware restart
on MT76x02

Fixes: aee5b8cf ("mt76: implement A-MPDU rx reordering in the driver code")
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce a default implementation for mt76_sw_scan and
mt76_sw_scan_complete in mt76 module and remove duplicated code
since most of the drivers share the same implementation
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This fixes the following checkpatch warnings:
CHECK: Alignment should match open parenthesis
CHECK: No space is necessary after a cast
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Refactor mt7615_mac_wtbl_set_key and introduce
the following routines in order to configure wtbl entries
and properly add hw support to BIP_CMAC_128 cipher:
- mt7615_mac_wtbl_update_cipher
- mt7615_mac_wtbl_update_pk
- mt7615_mac_wtbl_update_key
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mt76{15,03}_tx_tasklet in mt76_alloc_device in order to be used as
default tx_tasklet initialization. Remove duplicated code in
mt7603/mt7615 drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

No functional change intended.

Add SPDX identifiers to all remaining files in /mt76.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mt7603_get_rate in mac80211.c and rename it to mt76_get_rate
since it is shared between mt7603 and mt7615 drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Genralize mt76_get_txpower routine for 4x4:4 capable devices
in order to be reused in mt7615 driver
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mt7615_insert_ccmp_hdr in mac80211.c and rename it in
mt76_insert_ccmp_hdr since it is shared between mt7603 and mt7615
drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Announce antenna pattern cap to adapt PHY and baseband settings.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Disabling tasklets on stopping rx/tx is wrong. If blocked tasklet
is scheduled and we remove device we will get 100% cpu usage:

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
    9 root      20   0       0      0      0 R  93.8   0.0   1:47.19 ksoftirqd/0

by infinite loop in tasklet_action_common() and eventuall crash on next
mt76usb module load:

[ 2068.591964] RIP: 0010:tasklet_action_common.isra.17+0x66/0x100
[ 2068.591966] Code: 41 89 f5 eb 25 f0 48 0f ba 33 00 0f 83 b1 00 00 00 48 8b 7a 20 48 8b 42 18 e8 56 a3 b5 00 f0 80 23 fd 48 89 ea 48 85 ed 74 53 <48> 8b 2a 48 8d 5a 08 f0 48 0f ba 6a 08 01 72 0b 8b 42 10 85 c0 74
[ 2068.591968] RSP: 0018:ffff98758c34be58 EFLAGS: 00010206
[ 2068.591969] RAX: ffff98758e6966d0 RBX: ffff98756e69aef8 RCX: 0000000000000006
[ 2068.591970] RDX: 01060a053d060305 RSI: 0000000000000006 RDI: ffff98758e6966d0
[ 2068.591971] RBP: 01060a053d060305 R08: 0000000000000000 R09: 00000000000203c0
[ 2068.591971] R10: 000003ff65b34f08 R11: 0000000000000001 R12: ffff98758e6966d0
[ 2068.591972] R13: 0000000000000006 R14: 0000000000000040 R15: 0000000000000006
[ 2068.591974] FS:  0000000000000000(0000) GS:ffff98758e680000(0000) knlGS:0000000000000000
[ 2068.591975] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2068.591975] CR2: 00002c5f73a6cc20 CR3: 00000002f920a001 CR4: 00000000003606e0
[ 2068.591977] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2068.591978] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2068.591978] Call Trace:
[ 2068.591985]  __do_softirq+0xe3/0x30a
[ 2068.591989]  ? sort_range+0x20/0x20
[ 2068.591990]  run_ksoftirqd+0x26/0x40
[ 2068.591992]  smpboot_thread_fn+0xc5/0x160
[ 2068.591995]  kthread+0x112/0x130
[ 2068.591997]  ? kthread_create_on_node+0x40/0x40
[ 2068.591998]  ret_from_fork+0x35/0x40
[ 2068.591999] Modules linked in: ccm arc4 fuse rfcomm cmac bnep sunrpc snd_hda_codec_hdmi snd_soc_skl snd_soc_core snd_soc_acpi_intel_match snd_hda_codec_realtek snd_soc_acpi snd_hda_codec_generic snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core iTCO_wdt snd_hda_intel intel_rapl iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp btusb mei_wdt coretemp btrtl snd_hda_codec btbcm btintel intel_cstate snd_hwdep intel_uncore uvcvideo snd_hda_core videobuf2_vmalloc videobuf2_memops intel_rapl_perf wmi_bmof videobuf2_v4l2 intel_wmi_thunderbolt snd_seq bluetooth joydev videobuf2_common snd_seq_device snd_pcm videodev media i2c_i801 snd_timer idma64 ecdh_generic intel_lpss_pci intel_lpss mei_me mei ucsi_acpi typec_ucsi processor_thermal_device intel_soc_dts_iosf intel_pch_thermal typec thinkpad_acpi wmi snd soundcore rfkill int3403_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad pcc_cpufreq uas usb_storage crc32c_intel i915 i2c_algo_bit nvme serio_raw
[ 2068.592033]  drm_kms_helper e1000e nvme_core drm video ipv6 [last unloaded: cfg80211]

Fortunate thing is that this not happen frequently, as scheduling
tasklet on blocked state is very exceptional, though might happen.

Due to different RX/TX tasklet processing fix is different for those.

For RX we have to assure rx_tasklet do fail to resubmit buffers
by poisoning urb's and kill the tasklet.

For TX we need to handle all stop cases properly (suspend, module
unload, device removal).
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Performance improvement and preparation for adding airtime fairness support
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

- tx power is stored in the channels after ieee80211_register_hw, so
  chan->orig_mpwr needs to be updated as well
- for non-TSSI devices, mt76x2e needs to use a different target power value
  from the EEPROM
- fix a rounding error in a few places (need to round up, not down)
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mt76_tx_free in mt76_free_device routine in order to
unmap all txwi descriptors at module unload
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

All mt76 drivers (now also USB drivers) require empty .set_tim
callback. Add it to common mt76 module and use on all drivers.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt76_sw_queue data structure in order to support new
chipsets (e.g. mt7615) that have a shared hardware queue for all traffic
identifiers. mt76_sw_queue will be used to track outstanding packets
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fix following schedule while atomic in mt76x02_reset_state
since synchronize_rcu is run inside a RCU section

[44036.944222] mt76x2e 0000:06:00.0: MCU message 31 (seq 3) timed out
[44036.944281] BUG: sleeping function called from invalid context at kernel/rcu/tree_exp.h:818
[44036.944284] in_atomic(): 1, irqs_disabled(): 0, pid: 28066, name: kworker/u4:1
[44036.944287] INFO: lockdep is turned off.
[44036.944292] CPU: 1 PID: 28066 Comm: kworker/u4:1 Tainted: G        W         5.0.0-rc7-wdn-t1+ #7
[44036.944294] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009
[44036.944305] Workqueue: phy1 mt76x02_wdt_work [mt76x02_lib]
[44036.944308] Call Trace:
[44036.944317]  dump_stack+0x67/0x90
[44036.944322]  ___might_sleep.cold.88+0x9f/0xaf
[44036.944327]  rcu_blocking_is_gp+0x13/0x50
[44036.944330]  synchronize_rcu+0x17/0x80
[44036.944337]  mt76_sta_state+0x138/0x1d0 [mt76]
[44036.944349]  mt76x02_wdt_work+0x1c9/0x610 [mt76x02_lib]
[44036.944355]  process_one_work+0x2a5/0x620
[44036.944361]  worker_thread+0x35/0x3e0
[44036.944368]  kthread+0x11c/0x140
[44036.944376]  ret_from_fork+0x3a/0x50
[44036.944384] BUG: scheduling while atomic: kworker/u4:1/28066/0x00000002
[44036.944387] INFO: lockdep is turned off.
[44036.944389] Modules linked in: cmac ctr ccm af_packet snd_hda_codec_hdmi

Introduce __mt76_sta_remove in order to run sta_remove without holding dev->mutex.
Move __mt76_sta_remove outside of RCU section in mt76x02_reset_state

Fixes: e4ebb8b403d1 ("mt76: mt76x2: implement full device restart on watchdog reset")
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

MT7603 needs this to update the HT/VHT capabilities
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

mt76_init_stream_cap() and mt76_get_txpower() call __sw_hweight8()
directly, but that's only defined if CONFIG_GENERIC_HWEIGHT is
enabled.  The function that works on all architectures is hweight8().

Fixes: 551e1ef4 ("mt76: add mt76_init_stream_cap routine")
Fixes: 9313faac ("mt76: move mt76x02_get_txpower to mt76 core")
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mt76x{0,2} alloc_device common code in mt76_alloc_device and
remove duplicated code
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Use the appropriate mac80211 callbacks after beacon transmission
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The generic EWMA code cannot deal with negative numbers, so convert signal
to a positive number before adding it
Fixes mt76x2 AGC tuning
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This will be used by mt7603 as well
Signed-off-by: NFelix Fietkau <nbd@nbd.name>