Update usage to reflect the different perf trace variants.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Add documentation describing new 'perf trace' command changes
e.g. <command> handling and live-mode/top variants.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.

The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.

With this patch, the following live-mode trace now works as expected:

 $ perf trace rw-by-pid ls -al

The previous system-wide behavior for this command would still be
available by explicitly specifying -a:

 $ perf trace rw-by-pid -a ls -al

and if no <command> is specified, the output is also system-wide:

 $ perf trace rw-by-pid

Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.

For example:

 $ perf trace syscall-counts ls

Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.

If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:

 $ perf trace record syscall-counts
 $ perf trace report syscall-counts ls

So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:

- for commands with optional args and commands with no args, no args
  are sent to the report script, all are sent to the record step

- for 'top' commands i.e. that end with 'top', <commands> can't be
  used - all extra args are send to the report script as params

- for commands with required args, the n required args are taken to be
  the first n args after the script name and sent to the report
  script, and the rest are sent to the record step
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.

If given a command, perf trace record now only records the events for
the command, as users expect.

If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.

root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
              ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
              ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)

root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
    npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
              ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Other perf commands that invoke perf record, such as perf trace, may
want to reuse the options used by perf record.

This makes them non-static and renames them to avoid clashes with
other 'options' variables.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Including -a unconditionally when recording doesn't allow for the
option of running scripts without it.  Future patches will add add it
back if needed at run-time.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Free the other two fields of script_desc which somehow got overlooked,
free malloc'ed args in case exec fails, and add missing checks for
failed mallocs.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

profile_cpu was left over from an earlier implementation that
supported running perf top on a single CPU.  profile_cpu was no
longer set by any switch and usages of it resulted in dead code.

Instead, convert the code to use cpu_list, which is set by the
-C <cpu_list> option.

Also improved the printing of nr_cpus and cpu_list by correcting
the plurals.
Signed-off-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: a.p.zijlstra@chello.nl
Cc: acme@redhat.com
LKML-Reference: <1289269245-9388-1-git-send-email-cjashfor@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The gcc complains about small auto-var strings being allocated from stack space.
Make them const to avoid this:

 | CC util/ui/util.o
 | cc1: warnings being treated as errors
 | util/ui/util.c: In function ‘ui__dialog_yesno’:
 | util/ui/util.c:108: error: not protecting function: no buffer at least 8 bytes long
 | make: *** [util/ui/util.o] Error 1

The real bug is in the newtWinChoice() ABI - but that's an
externality we cannot fix here, so we use this workaround.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NFrédéric Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20101106084724.GA5956@lenovo>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The equivalent to this SystemTAP script:

http://sourceware.org/systemtap/wiki/WSFutexContention

[root@doppio ~]# perf trace futex-contention
Press control+C to stop and show the summary
^Cnpviewer.bin[15242] lock 7f0a8be19104 contended 29 times, 72806 avg ns
npviewer.bin[15242] lock 7f0a8be19130 contended 2 times, 1355 avg ns
synergyc[17245] lock f127f4 contended 1 times, 1830569 avg ns
firefox[15116] lock 7f2b7238af0c contended 168 times, 1230390 avg ns
synergyc[17245] lock f2fc20 contended 1 times, 33149 avg ns
npviewer.bin[15255] lock 7f0a8be19074 contended 155 times, 73047 avg ns
npviewer.bin[15255] lock 7f0a8be190a0 contended 127 times, 7088 avg ns
synergyc[17247] lock f12854 contended 1 times, 46741 avg ns
synergyc[17245] lock f12610 contended 1 times, 7358 avg ns
[root@doppio ~]#

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We want just the script output, not internal details about the record phase.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we include a newline character in the string argument to perror()
then the output will be split across two lines like so,

    Unable to read perf file descriptor
    : No space left on device

Deleting the newline character prints a much more readable error,

    Unable to read perf file descriptor: No space left on device

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <89e77b54659bc3798b23a5596c2debb7f6f4cf27.1283010281.git.matt@console-pimps.org>
Signed-off-by: NMatt Fleming <matt@console-pimps.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@felicio.ghostprotocols.net>

Where we don't have the audit.MACH_ARMEB constant.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

. Print message at script start telling how to get te summary
. Print the syscall names
. Accept both pid (if numeric) or COMM name

Now it looks like this:

[root@emilia tmp]# perf trace syscall-counts-by-pid
Press control+C to stop and show the summary
^C
syscall events by comm/pid:

comm [pid]/syscalls                            count
----------------------------------------  ----------

automount [1670]
  futex                                            2

sshd [2322]
  rt_sigprocmask                                   4
  select                                           2
  write                                            1
  read                                             1

perf [15178]
  read                                          2506
  open                                           794
  close                                          769
  write                                          240
  getdents                                       112
  lseek                                           16
  stat                                             9
  perf_counter_open                                5
  fcntl                                            5
  mmap                                             5
  statfs                                           2

perf [15179]
  read                                         56701
  open                                           499
  stat                                           176
  fstat                                          149
  close                                          109
  mmap                                            98
  brk                                             75
  rt_sigaction                                    66
  munmap                                          42
  mprotect                                        24
  lstat                                            7
  lseek                                            5
  getdents                                         4
  ioctl                                            3
  readlink                                         2
  futex                                            1
  statfs                                           1
  getegid                                          1
  geteuid                                          1
  getgid                                           1
  getuid                                           1
  getrlimit                                        1
  fcntl                                            1
  uname                                            1
  write                                            1
[root@emilia tmp]# fg
-bash: fg: current: no such job
[root@emilia tmp]# perf trace syscall-counts-by-pid 2322
Press control+C to stop and show the summary
^C
syscall events by comm/pid:

comm [pid]/syscalls                            count
----------------------------------------  ----------

sshd [2322]
  rt_sigprocmask                                   4
  select                                           2
  write                                            1
  read                                             1
[root@emilia tmp]# perf trace syscall-counts-by-pid sshd
Press control+C to stop and show the summary
^C
syscall events for sshd:

comm [pid]/syscalls                            count
----------------------------------------  ----------

sshd [2322]
  rt_sigprocmask                                   4
  select                                           2
  write                                            1
  read                                             1
[root@emilia tmp]#

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

[root@emilia tmp]# perf trace sctop 1
syscall events:

event                                          count
----------------------------------------  ----------
read                                          215400
futex                                           4029
write                                            376
brk                                               33
rt_sigprocmask                                    24
select                                            17
lseek                                              2
fsync                                              1
^C[root@emilia tmp]#

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

. Print message at script start telling how to get te summary
. Print the syscall name

Now it looks like this:

[root@emilia ~]# perf trace syscall-counts
Press control+C to stop and show the summary
^C
syscall events:

event                                          count
----------------------------------------  -----------
read                                          102752
open                                            1293
close                                            878
write                                            319
stat                                             185
fstat                                            149
getdents                                         116
mmap                                              98
brk                                               80
rt_sigaction                                      66
munmap                                            42
mprotect                                          24
lseek                                             21
lstat                                              7
rt_sigprocmask                                     4
futex                                              3
statfs                                             3
ioctl                                              3
readlink                                           2
select                                             2
getegid                                            1
geteuid                                            1
getgid                                             1
getuid                                             1
getrlimit                                          1
fcntl                                              1
uname                                              1
[root@emilia ~]#

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

. Print message at script start telling how to get te summary
. Print the syscall name using the audit-lib-python package, if
  installed
. Print the errno string
. Accept both pid (if numeric) or COMM name

Now it looks like this:

[root@emilia ~]# perf trace failed-syscalls-by-pid
Press control+C to stop and show the summary
^C
syscall errors:

comm [pid]                           count
------------------------------  ----------

automount [1670]
  syscall: futex
    err = ETIMEDOUT                     39

irqbalance [1462]
  syscall: openat
    err = ENOENT                         4

perf [7888]
  syscall: lseek
    err = ESPIPE                         1
  syscall: open
    err = ENOENT                        24

perf [7889]
  syscall: ioctl
    err = EINVAL                         1
  syscall: readlink
    err = EINVAL                         2
  syscall: open
    err = ENOENT                       389
  syscall: stat
    err = ENOENT                       141
  syscall: lseek
    err = ESPIPE                         3
[root@emilia ~]#

[root@emilia ~]# perf trace failed-syscalls-by-pid 1670
Press control+C to stop and show the summary
^C
syscall errors:

comm [pid]                           count
------------------------------  ----------

automount [1670]
  syscall: futex
    err = ETIMEDOUT                      2
[root@emilia ~]#
[root@emilia ~]#
[root@emilia ~]#
[root@emilia ~]# perf trace failed-syscalls-by-pid automount
Press control+C to stop and show the summary
^C
syscall errors for automount:

comm [pid]                           count
------------------------------  ----------

automount [1669]
  syscall: futex
    err = ETIMEDOUT                      1

automount [1670]
  syscall: futex
    err = ETIMEDOUT                      5
[root@emilia ~]#

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixing the following error on 32-bit arches:

util/probe-finder.c: In function ‘line_range_search_cb’:
util/probe-finder.c:1734: error: format ‘%lx’ expects type ‘long
unsigned int’, but argument 3 has type ‘Dwarf_Off’
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The extension starts with the last dot in the name, not the first.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286723462.2955.206.camel@localhost>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Set $PERF_EXEC_PATH before starting the record and report scripts, and
make them use it where necessary.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286723403.2955.205.camel@localhost>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Existing documentation doesn't discuss event modifiers, so add a description of
what's currently possible to the documentation of perf-list.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1287107460-12112-1-git-send-email-sonnyrao@linux.vnet.ibm.com>
Signed-off-by: NSonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We wrap it in libslang.h because we need to deal with older slang release
where HAVE_LONG_LONG is referenced as:

So we need to define it.

Noticed when rebuilding the perf tools on a RHEL5 machine.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add basic module probe support on perf probe. This introduces "--module
<MODNAME>" option to perf probe for putting probes and showing lines and
variables in the given module.

Currently, this supports only probing on running modules.  Supporting off-line
module probing is the next step.

e.g.)
[show lines]
 # ./perf probe --module drm -L drm_vblank_info
<drm_vblank_info:0>
      0  int drm_vblank_info(struct seq_file *m, void *data)
      1  {
                struct drm_info_node *node = (struct drm_info_node *) m->private
      3         struct drm_device *dev = node->minor->dev;
 ...
[show vars]
 # ./perf probe --module drm -V drm_vblank_info:3
Available variables at drm_vblank_info:3
        @<drm_vblank_info+20>
                (unknown_type)  data
                struct drm_info_node*   node
                struct seq_file*        m
[put a probe]
 # ./perf probe --module drm drm_vblank_info:3 node m
Add new event:
  probe:drm_vblank_info (on drm_vblank_info:3 with node m)

You can now use it on all perf tools, such as:

        perf record -e probe:drm_vblank_info -aR sleep 1
[list probes]
 # ./perf probe -l
probe:drm_vblank_info (on drm_vblank_info:3@drivers/gpu/drm/drm_info.c with ...

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101341.3542.71638.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add --externs for allowing --vars to show accessible global (externally
defined) variables from a given probe point too.

This will give you a hint which globals can be accessible from the probe point.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101335.3542.31003.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just change the order of function arguments for ease of read; moving optional
bool flag to the last.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101329.3542.51200.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add -V (--vars) option for listing accessible local variables at given probe
point. This will help finding which local variables are available for event
arguments.

e.g.)
 # perf probe -V call_timer_fn:23
 Available variables at call_timer_fn:23
         @<run_timer_softirq+345>
                 function_type*  fn
                 int     preempt_count
                 long unsigned int       data
                 struct list_head        work_list
                 struct list_head*       head
                 struct timer_list*      timer
                 struct tvec_base*       base

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101323.3542.40282.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow users to set external defined global variables as event arguments (e.g.
jiffies).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20101021101316.3542.1999.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix to check the die's address and search into the die only if it has given
address.

This will avoid finding wrong variables in wrong basic block.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20101021101309.3542.46434.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix to get the actual type die of variables by using dwarf_attr_integrate()
which gets attribute from die even if the type die is connected by
DW_AT_abstract_origin.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20101021101302.3542.38549.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Changes:
 v4: Fix the cosmetic issue of redundant dot-ops
 v3: Change rmb() to use SYNC
 v2: Include mips unistd.h and define rmb()/cpu_relax() in tools/perf/perf.h
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Both python_scripting_ops and perl_scripting_ops have two global definitions.
One in trace-event-scripting.c and one in their respective scripting-engine
modules.

The issue is that depending on the linker order one definition or the other
is chosen. One is uninitialized (bss), while the other is initialized. If
the uninitialized version is chosen, then perf does not function properly.

This patch fixes this by adding the extern prefix to the definitions in
trace-event-scripting.c.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4c97e41a.078fd80a.7a8b.3cc9@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There a typo in util/ui/browsers/hists.c that leads to a segfault when you
press the 'a' key on a non-resolved symbol (plain hex address).

LKML-Reference: <20100923201901.GE31726@gambetta>
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@xprog.eu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The patch ecafda60 introduced a problem where all object files would be
always rebuilt, fix it by using:

http://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.htmlReported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Bernd Petrovitsch <bernd@sysprog.at>
Signed-off-by: NKusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

They are useless and take away precious columns and lines, so stop using
windows.

One more step in removing newt code, that after all is not being useful
at all for the coalescing TUI model in perf.
Suggested-by: NChristoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100822082003.GB7365@infradead.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

By returning immediately if it was already initialized, do it as well at
symbol__exit, refusing multiple deinitializations.

This fixes problems in the kmem, sched and timechart commands.
Reported-by: NDavidlohr Bueso <dave@gnu.org>
Cc: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: NJovi Zhang <bookjovi@gmail.com>
LKML-Reference: AANLkTi=9Cn=R8SPMCRp5z+gEjXbaBHeb-AaOtRbuwwcn@mail.gmail.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Don't make argument names from raw parameters (means the parameters are written
in kprobe-tracer syntax), because the argument syntax may include special
characters.  Just leave it, then kprobe-tracer gives a new name.
Reported-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100827113859.22882.75598.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix a bug to support %return probe syntax again. Previous commit 4235b045 has a
bug which disables the %return syntax on perf probe.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100827113852.22882.87447.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a perf script which shows packets processing and processed
time. It helps us to investigate networking or network devices.

If you want to use it, install perf and record perf.data like
following.

If you set script, perf gathers records until it ends.
If not, you must Ctrl-C to stop recording.

And if you want a report from record,

If you use some options, you can limit the output.
Option is below.

tx: show only tx packets processing
rx: show only rx packets processing
dev=: show processing on this device
debug: work with debug mode. It shows buffer status.

For example, if you want to show received packets processing
associated with eth4,

106133.171439sec cpu=0
  irq_entry(+0.000msec irq=24:eth4)
         |
  softirq_entry(+0.006msec)
         |
         |---netif_receive_skb(+0.010msec skb=f2d15900 len=100)
         |            |
         |      skb_copy_datagram_iovec(+0.039msec 10291::10291)
         |
  napi_poll_exit(+0.022msec eth4)

This perf script helps us to analyze the processing time of a
transmit/receive sequence.
Signed-off-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com>
Cc: Izumo Taku <izumi.taku@jp.fujitsu.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Scott Mcmillan <scott.a.mcmillan@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4C72439D.3040001@jp.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Each histogram entry has a callchain root that stores the
callchain samples. However we forgot to initialize the
tracking of children hits of these roots, which then got
random values on their creation.

The root children hits is multiplied by the minimum percentage
of hits provided by the user, and the result becomes the minimum
hits expected from children branches. If the random value due
to the uninitialization is big enough, then this minimum number
of hits can be huge and eventually filter every children branches.

The end result was invisible callchains. All we need to
fix this is to initialize the children hits of the root.
Reported-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: 2.6.32.x-2.6.35.y <stable@kernel.org>