Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

Some SoC need to redefine MSM_DGT_BASE from it's default.
This allows it to be defined in a header to override the
default value.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

GPIO support for Qualcomm SOCs requires interaction with the
radio (baseband processor). This API allows the different boards
to enable GPIO through the radio processor in a generic way.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

The 'PCOM' method of clock control (commands issued to the radio
CPU) is shared across several (but not all) Qualcomm SOCs.
Generalize this clock mechanism so these other SOCs can be added.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

Scorpion-based SOCs from Qualcomm use a different interrupt
controller 'sirc'.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

msm_iomap.h is specific to the MSM7x00 series devices.  Generalize
this in preparation to support more devices.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

irqs.h is specific to the MSM7x00 series devices.  Generalize
this in preparation to support more devices.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

devices.c is specific to the MSM7x00 series of SOCs.  Rename
appropriately in preparation to support more devices.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

Also drops the old mddi structure, which conflicts with the new
file.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This fixes the following warning,

arch/arm/mach-msm/smd_debug.c:240: warning: initialization from incompatible pointer type
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Without a debug uart selected you get this failure,

arch/arm/mach-msm/board-trout.c:85: error: 'MSM_DEBUG_UART_PHYS' undeclared here (not in a function)
arch/arm/mach-msm/board-trout.c:86: error: 'MSM_DEBUG_UART_BASE' undeclared here (not in a function)

This just removes these lines in that case.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This removes the Kconfig menu option. SMD can still be selected
but it's done inside the Kconfig file and not via the menu.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

When booting up we need to wait for the modem processor to
partially boot. This is because the modem processor does
resource allocation for us. If we don't wait the modem won't
honor our requests and we end up crashing or in an unknown
state. This change just formalizes the waiting process.
Signed-off-by: NDaniel Walker <c_dwalke@quicinc.com>

This irq handler isn't used in all cases, so add the proper ifdef. This
eliminates a compiler warning due to the function not getting used.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This just removed some unneeded predefines. One needed a whole
function moved down further. The others could just be deleted.

No functional changes.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This moves the msm_a2m_int() function into the header, and
does a small macro clean up to be more inline with Linux
norms. No functional changes.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

"unsigned" translates to "unsigned int", but this value holds an
address. We always want to use unsigned long for addresses since
it will change size to fit the machine.

This just convert the one address holder to unsigned long.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This modifies SMD to use either the package v3 or package v4,
but not both. The current code tries to allocate as v4 on all
system which can produce a scary looking error message on boot up,

smem_find(16, 40): wrong size 16424
smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'

With this error the code then falls back on the package v3 allocation
method. This method is inefficient because it causes a slow down
on some systems even when the allocation method can be determined
at compile time. It also causes a kernel size increase that effects
all system and is not needed.

This change corrects the allocation to use one method or the other
and not both.
Signed-off-by: NDaniel Walker <c_dwalke@quicinc.com>

This cleans up coding style. There are no run time changes.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Forcing the alignment prevents gcc from generating byte reads for word
member variables. Lack of this caused issues when the app processor
modified struct members and the modem saw a partial word write.
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Some smd clients may write from multiple threads, in which case it's
not safe to call smd_write without holding a lock.  smd_write_atomic()
provides the same functionality as smd_write() but obtains the smd
lock first.
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NIliyan Malchev <malchev@google.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Don't mark a channel as allocated if we failed to allocate it
(perhaps the modem updated one table but not the other, etc)
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

When we read data out of the sender's fifo, we need to advance the sender's
tail pointer, not the receiver's.
Signed-off-by: NHaley Teng <Haley_Teng@htc.com>
Acked-by: NDima Zavin <dima@android.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

- QSD8250 has a DSP that speaks SMD, in addition to the modem
- handle a separate list of modem vs dsp channels
- install dsp smd irq handler as necessary
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

- pull debug code into smd_debug.c
- move necessary structures and defines into smd_private.h
- fix some comment formatting, etc
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

The new protocol require writing to two state fields, and reading
several fields.
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

- support both v2 and v1 style smd channels
- support both v2 and v1 smsm shared state
- update smsm state defines and smem item enum
- prep work for dealing with smd to qdsp6
- simplify some smem access to minimize use of smem_alloc() at runtime
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This code provides the low level interface to the "shared memory
state machine" (smsm), and the virtual serial channels (smd), used
to communicate with the baseband processor.  Higher level transports
(rpc, ethernet, AT command channel, etc) ride on top of this.
Signed-off-by: NBrian Swetland <swetland@google.com>

Also, convert all SDCC IRQ resources to be named. No longer pass status_irq
in the platform_data
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NSan Mehat <san@google.com>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Just adds a mailing list to the MSM maintainer entry.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This adds a basic board file without Kconfig changes.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NWillie Ruan <wruan@quicinc.com>

Support independent enable and disable by clients for common
vreg. First enable switches on and last disable switches off.

This change has no check for voltage level so clients
must agree on level for common vreg.
Signed-off-by: NMatthew Wilson <mtwilson@quicinc.com>

Fixes the following warning,

arch/arm/mach-msm/acpuclock-arm11.c:138: warning: 'freq_table' defined but not used

when CONFIG_CPU_FREQ_TABLE is not enabled.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>