[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of
minimal transition too often. Commit state of dc with no check
will do pipeline setup which may re-initialize the component with no
need such as audio.

[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Reviewed-by: NDillon Varone <Dillon.Varone@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NZhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Adding log for LTTPR to facilitate debugging.
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NLeo Chen <sancchen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
- For SubVP pipe split case we need to use a minimial transition
  when opening MPO video since we are transitioning from 4 pipes
  to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
  there was a shallow copy of the dc->current_state
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We split out ILR config from "global" to "per-panel" config settings.
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NIan Chen <ian.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[HOW&WHY]
Fixed check to only avoid PSR entry when panel
is disconnected. PSR exit can be permitted to restore
the HW to it's non-PSR state.
Reviewed-by: NJayendran Ramani <Jayendran.Ramani@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NIswara Nagulendran <Iswara.Nagulendran@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why && How]
Remove the unnecessary AUX trace and use one trace for AUX failure.
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Analyzer shows incorrect V freq in MSA for some large timing.

[how]
Cast an 32 bit integer to uint64_t before multiplication to avoid
integer overflow for a very large timing.
Reviewed-by: NAriel Bernstein <Eric.Bernstein@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
When enabling phantom pipe on a pipe that was previously
using immediate flip, we have to disable GSL or this will
prevent the update from taking place right away on the phantom
pipe when we enable it in FW
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
limit the vm prefetch check for now, until the feature is fully
verified.
Reviewed-by: NHansen Dsouza <Hansen.Dsouza@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 796d6a37.

4K144 resolution isn't available on DCN31.
Reviewed-by: NSherry Wang <Yao.Wang1@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
- SubVP rotation support is not explicitly implemented,
  so block SubVP in rotation cases to avoid unexpected
  behaviors
Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DML does not take the fact that dcn315 does not have enough detile
buffer to max all pipes. This change adds a workaround to apply
the same logic DC does when calculating detile buffer size in DML.
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY?]
In some cases, DCFCLK hardmin requests are not acknowledged by SMU as
the requested clock does not have a compatible ratio with current FCLK,
and it cannot be changed as FCLK P-state is not allowed.

[HOW?]
Allow FCLK p-state change prior to changing DCFCLK hardmin.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NDillon Varone <Dillon.Varone@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why?]
Currently SubVP programming is only done in commit_planes_for_stream, as
it was expected only this call would add/remove planes from a
display.

[How?]
Add SubVP programming to dc_commit_state_no_check.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NDillon Varone <Dillon.Varone@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_bo_kmap() returns error when fails to map buffer object. Add the
error check and propagate the error.
Signed-off-by: NLi Zhong <floridsleeves@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

enc314_stream_encoder_dp_blank is only used in dcn314_dio_stream_encoder.c now,
change it to static.

Fixes: c55bf690 ("drm/amd/display: Add explicit FIFO disable for DP blank")
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
We only want to commit the SubVP config to DMCUB
after the main and phantom pipe programming has
completed. Commiting the state early can cause
issues such as P-State being allowed by the HW
early which causes the SubVP state machine to
go into a bad state
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBrian Chang <Brian.Chang@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Removal of DC_FP_* wrappers from dml (9696679b) provokes a mutex
lock [2] on the amdgpu driver. Re-arrange the dcn10 code to avoid
locking the mutex by placing the DC_FP_* wrappers around the proper
functions.

This fixes the following WARN/stacktrace:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 227, name: systemd-udevd
preempt_count: 1, expected: 0
CPU: 4 PID: 227 Comm: systemd-udevd Not tainted 6.0.0-rc6-qtec-standard #2
Hardware name: Qtechnology A/S QT5222/QT5221, BIOS v1.0.1 06/07/2021
Call Trace:
 <TASK>
 dump_stack_lvl+0x33/0x42
 __might_resched.cold.172+0xa5/0xb3
 mutex_lock+0x1a/0x40
 amdgpu_dpm_get_clock_by_type_with_voltage+0x38/0x70 [amdgpu]
 dm_pp_get_clock_levels_by_type_with_voltage+0x64/0xa0 [amdgpu]
 dcn_bw_update_from_pplib+0x70/0x340 [amdgpu]
 dcn10_create_resource_pool+0x8c8/0xd20 [amdgpu]
 ? __kmalloc+0x1c7/0x4a0
 dc_create_resource_pool+0xe7/0x190 [amdgpu]
 dc_create+0x212/0x5d0 [amdgpu]
 amdgpu_dm_init+0x246/0x370 [amdgpu]
 ? schedule_hrtimeout_range_clock+0x93/0x120
 ? phm_wait_for_register_unequal.part.1+0x4a/0x80 [amdgpu]
 dm_hw_init+0xe/0x20 [amdgpu]
 amdgpu_device_init.cold.56+0x1324/0x1653 [amdgpu]
 ? pci_bus_read_config_word+0x43/0x80
 amdgpu_driver_load_kms+0x15/0x120 [amdgpu]
 amdgpu_pci_probe+0x116/0x320 [amdgpu]
 pci_device_probe+0x97/0x110
 really_probe+0xdd/0x340
 __driver_probe_device+0x80/0x170
 driver_probe_device+0x1f/0x90
 __driver_attach+0xdc/0x180
 ? __device_attach_driver+0x100/0x100
 ? __device_attach_driver+0x100/0x100
 bus_for_each_dev+0x74/0xc0
 bus_add_driver+0x19e/0x210
 ? kset_find_obj+0x30/0xa0
 ? 0xffffffffa0a5b000
 driver_register+0x6b/0xc0
 ? 0xffffffffa0a5b000
 do_one_initcall+0x4a/0x1f0
 ? __vunmap+0x28e/0x2f0
 ? __cond_resched+0x15/0x30
 ? kmem_cache_alloc_trace+0x3d/0x440
 do_init_module+0x4a/0x1e0
 load_module+0x1cba/0x1e10
 ? __do_sys_finit_module+0xb7/0x120
 __do_sys_finit_module+0xb7/0x120
 do_syscall_64+0x3c/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff2b5f5422d
Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48>
3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 ab 0e 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc44ab28e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000555c566a9240 RCX: 00007ff2b5f5422d
RDX: 0000000000000000 RSI: 00007ff2b60bb353 RDI: 0000000000000019
RBP: 00007ff2b60bb353 R08: 0000000000000000 R09: 0000555c566a9240
R10: 0000000000000019 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000020000 R14: 0000000000000000 R15: 0000000000000000
</TASK>

Fixes: 9696679b ("drm/amd/display: remove DC_FP_* wrapper from dml folder")
Reviewed-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NDaniel Gomez <daniel@qtec.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amd-drm-next-6.1-2022-09-30:

amdgpu:
- RLC FW code cleanup
- RLC fixes for GC 11.x
- SMU 13.x fixes
- CP FW code cleanup
- SDMA FW code cleanup
- GC 11.x fixes
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Misc fixes
- RAS fixes
- SR-IOV fixes
- VCN 4.x fixes

amdkfd:
- GC 11.x fixes
- Xnack fixes
- UBSAN warning fix
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930162012.5823-1-alexander.deucher@amd.com

drm-misc-next for v6.1:

Core Changes:
- Add dma_resv_assert_held to vmap/vunmap calls.
- Add kunit tests for some format conversion calls.
- Don't rewrite link config when setting phy test pattern in
  DP link training.

Driver Changes:
- Assorted small fixes in bridge/lt8192b, qxl, virtio-gpu, ast.
- Fix corrupted image output in lt8912b.
- Fix driver unbind in meson.
- Add INX, BOE, AUO, Multi-Inno Technology panels to panel-edp.
- Synchronize access to GEM bo's in simpledrm, ssd130x.
- Use dev_err_probe in panel-edp and panel-simple.
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/afbd505a-3799-c73b-8008-ef6e156ad7e1@linux.intel.com

This was fixed in initialize_cpsch before, but not in initialize_nocpsch.
Factor sdma bitmap initialization into a helper function to apply the
correct implementation in both cases without duplicating it.

v2: Added a range check
Reported-by: NEllis Michael <ellis@ellismichael.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NGraham Sider <Graham.Sider@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Unified memory usage with xnack off is tracked to avoid oversubscribe
system memory, with xnack on, we don't track unified memory usage to
allow memory oversubscribe. When switching xnack mode from off to on,
subsequent free ranges allocated with xnack off will not unreserve
memory. When switching xnack mode from on to off, subsequent free ranges
allocated with xnack on will unreserve memory. Both cases cause memory
accounting unbalanced.

When switching xnack mode from on to off, need reserve already allocated
svm range memory. When switching xnack mode from off to on, need
unreserve already allocated svm range memory.

v6: Take prange lock to access range child list
v5: Handle prange child ranges
v4: Handle reservation memory failure
v3: Handle switching xnack mode race with svm_range_deferred_list_work
v2: Handle both switching xnack from on to off and from off to on cases
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable sram on vcn_4_0_2
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable VCN DPG on GC11_0_1
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

9178e3dcb121 ("mm: discard __GFP_ATOMIC") removed __GFP_ATOMIC,
replacing it with a check for not __GFP_DIRECT_RECLAIM.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NRob Clark <robdclark@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929161404.2769414-1-robdclark@gmail.com

Merge tag 'drm-intel-next-fixes-2022-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix release build bug in 'remove GuC log size module parameters' (John Harrison)
- Remove ipc_enabled from struct drm_i915_private (Jani Nikula)
- Do not cleanup obj with NULL bo->resource (Nirmoy Das)
- Fix device info for devices without display (Jani Nikula)
- Force DPLL calculation for TC ports after readout (Ville Syrjälä)
- Use i915_vm_put on ppgtt_create error paths (Chris Wilson)
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YzWqtwPNxAe+r9FO@tursulin-desk

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: NYuan Can <yuancan@huawei.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-3-yuancan@huawei.com

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: NYuan Can <yuancan@huawei.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-2-yuancan@huawei.com
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-2-yuancan@huawei.com

Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support.
Signed-off-by: NChristoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: NMarek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com

Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel
compatible string.
Signed-off-by: NChristoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMarek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220812114600.4895-1-cniedermaier@dh-electronics.com

Use fw->size instead of discovery_tmr_size for fallback path.
Signed-off-by: NLe Ma <le.ma@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For xgmi sriov, the reset is handled by host driver and hive->reset_domain
is not initialized so need to check if it exists before doing a put.
Signed-off-by: NVignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: NShaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Simplify the logic in amdgpu_gmc_noretry_set by getting rid of the
switch. Also set noretry=1 as default for GFX 10.3.0 and greater since
retry faults are not supported.
Signed-off-by: NGraham Sider <Graham.Sider@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On ChromeOS clang build, the following warning is seen:

/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:6: error: variable 'mc_umc_status' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
        if (mca_addr == UMC_INVALID_ADDR) {
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:485:21: note: uninitialized use occurs here
        if ((REG_GET_FIELD(mc_umc_status, MCA_UMC_UMC0_MCUMC_STATUST0, Val) == 1 &&
                           ^~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:1208:5: note: expanded from macro 'REG_GET_FIELD'
        (((value) & REG_FIELD_MASK(reg, field)) >> REG_FIELD_SHIFT(reg, field))
           ^~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:2: note: remove the 'if' if its condition is always true
        if (mca_addr == UMC_INVALID_ADDR) {
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:460:24: note: initialize the variable 'mc_umc_status' to silence this warning
        uint64_t mc_umc_status, mc_umc_addrt0;
                              ^
                               = 0
1 error generated.
make[5]: *** [/mnt/host/source/src/third_party/kernel/v5.15/scripts/Makefile.build:289: drivers/gpu/drm/amd/amdgpu/umc_v6_7.o] Error 1

Fix by initializing mc_umc_status = 0.

Fixes: 1014bd1c ("drm/amdgpu: support to convert dedicated umc mca address")
Reviewed-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

Enabling Z10 optimizations allows DMUB to disable the OTG during PSR
link-off. This theoretically saves power by putting more of the display
hardware to sleep. However, we observe that with PSR SU, it causes
visual artifacts, higher power usage, and potential system hang.

This is partly due to an odd behavior with the VStartup interrupt used
to signal DRM vblank events. If the OTG is toggled on/off during a PSR
link on/off cycle, the vstartup interrupt fires twice in quick
succession. This generates incorrectly timed vblank events.
Additionally, it can cause cursor updates to generate visual artifacts.

Note that this is not observed with PSR1 since PSR is fully disabled
when there are vblank event requestors. Cursor updates are also
artifact-free, likely because there are no selectively-updated (SU)
frames that can generate artifacts.

[How]

A potential solution is to disable z10 idle optimizations only when fast
updates (flips & cursor updates) are committed. A mechanism to do so
would require some thoughtful design. Let's just disable idle
optimizations for PSR2 for now.

Fixes: 7cc191ee ("drm/amd/display: Implement MPO PSR SU")
Reported-by: NAugust Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/Tested-by: NAugust Wikerfors <git@augustwikerfors.se>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Do RAS page retirement in poison consumption handler unconditionally.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the convert interface to simplify code.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update umc error address query interface, the mca address can be read
from register or input from parameter.

TODO: define a common address conversion function to simplify the code.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make it global so we can convert specific mca address.

v2: rename query_error_address_per_channel to
convert_ras_error_address
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix init SDMA microcode error for sdma v4, which caused by mistake when
rearch sdma init microcode function (coding 4.2.2 to 4.2.0).
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>