- 13 7月, 2012 1 次提交
-
-
由 Mark Brown 提交于
Ensure robust startup of the part by going through the reset procedure prior to resyncing the full register cache, avoiding potential intermittent faults in some designs. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 12 7月, 2012 1 次提交
-
-
由 Matthias Kaehlcke 提交于
Release the memory of the routing table before leaving the function upon errors in the device tree Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 7月, 2012 3 次提交
-
-
由 Mark Brown 提交于
The WM5110 is a highly integrated low power audio subsystem for smartphones, tablets and other portable audio devices. It combines an advanced DSP feature set with a flexible, high performance audio hub CODEC. This patch adds the audio CODEC driver for the device. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dan Carpenter 提交于
GCC complains that "ret" is uninitialized here. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-By: NRajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Some Arizona chips have a higher frequency for the FLL VCO, support this in the common code. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 7月, 2012 5 次提交
-
-
由 Jiri Prchal 提交于
This patch adds input selection of main codec clock - from what pin. Both registers set same value since codec uses clock divider or pll at one time. Signed-off-by: NJiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jiri Prchal 提交于
This patch adds AGC target level and times settings for TLV320AIC3x. Enums uses small arrays of two channels left and right since it uses different registers. Signed-off-by: NJiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jiri Prchal 提交于
This patch adds missing deemphasis switch. Signed-off-by: NJiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The analogue PGA shifts were used; this makes no practical difference as the values are the same. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Some devices have four input structures rather than three. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 7月, 2012 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 7月, 2012 6 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Since we're now relying on DAPM for things like enabling clocks when we reparent the clocks for widgets we need to either use conditional routes (which are expensive) or remove routes at runtime. Add a route removal API to support this use case. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
If we add a new route at runtime then we'll need to recheck the connections to the affected widgets. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Liam Girdwood 提交于
Some userspace will open a PCM device and then configure mixers for routing before triggering. This patch allows userspace to do this sequence. Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Simon Wilson 提交于
Fix spelling mistake in "High-Performance" option of twl6040 power mode. Signed-off-by: NSimon Wilson <simonwilson@google.com> Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Liam Girdwood 提交于
Use dev_ style logging throughout soc_new_pcm() Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 7月, 2012 3 次提交
-
-
由 Mark Brown 提交于
Not previously noticed due to normal usage being with CODEC<->CODEC links. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
This enables common telephony use cases. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
If an audio interface is configured to use ASYNCCLK then update the asynchronous sample rate rather than one of our primary sample rates. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 7月, 2012 6 次提交
-
-
由 Fabio Estevam 提交于
mx27pdk board also has a mc13783 codec. Add support for it and do a run-time machine type check to perform the correct audiomux settings. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Hui Wang 提交于
If we don't set IMX_AUDMUX_V2_PTCR_TCLKDIR in the AUDMUX PTCR register (means Tx clock pin is input), we don't need to set IMX_AUDMUX_V2_PTCR_TCSEL as well. Since both i.MX35, i.MX51 and i.MX6 datasheet says "When Tx clock pin set as an input, the TCSEL settings are ignored". Signed-off-by: NHui Wang <jason77.wang@gmail.com> Acked-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Allow any BCLK which can be divided down to generate LRCLK, not just the lowest possible BCLK to clock out the samples. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Allow the user to select which of the system clocks each AIF is referenced to and constran the DAI to the set of frequencies which can be generated from that clock. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
They're the rates for the BCLK, not for the sample rate, so rename so that we don't confuse ourselves. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 7月, 2012 10 次提交
-
-
由 Vipin Kumar 提交于
This patch implements the spdif out driver for ST peripheral. This peripheral implements IEC60958 standard Signed-off-by: NVipin Kumar <vipin.kumar@st.com> Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Rajeev Kumar 提交于
The STA529 is a digital stereo class-D audio amplifier. It includes an audio DSP, an ST proprietary high-efficiency class-D driver and CMOS power output stage. It is intended for high-efficiency digital-to-power-audio conversion for portable applications. Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jiri Prchal 提交于
Adds missing register default values to cache. Signed-off-by: NJiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jiri Prchal 提交于
Adds register and bit shift definitions in header file. Changes are for TLV320AIC310x based on data sheet. Signed-off-by: NJiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Leave it up to the machine driver to disable accessory detection if desired, the common pattern is to have accessory detection be a wake source. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Since most new drivers are expected to use regmap and since frequently the only thing we need to do in the CODEC probe function is configure the I/O try to initialise the register I/O using regmap if the driver hasn't done so after probe(). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Laxman Dewangan 提交于
Use the dmaengine based Tegra APB DMA driver for data transfer between SPI fifo and memory in place of legacy Tegra APB DMA. Because generic soc-dmaengine-pcm uses the DMAs API based on dmaengine, using the exported APIs provided by this generic driver. The new driver is selected if legacy driver is not selected and new dma driver is enabled through config file. Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Tested-by: NStephen Warren <swarren@wwwdotorg.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Benoît Thébaudeau 提交于
Stereo is not yet supported by dapm widgets, so remove stereo code from snd_soc_dapm_get_volsw(), and warn if stereo controls are detected. Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sachin Kamat 提交于
Current method for machine driver to register with the ASoC core is to use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 29 6月, 2012 2 次提交
-
-
由 Benoît Thébaudeau 提交于
snd_soc_dapm_put_volsw() sets connect incorrectly in the case max > 1 with invert. In that case, the raw disconnect value should be max, which corresponds to the userspace value 0. This use case currently does not appear upstream, but it could break SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future. Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Otherwise we fail to link when building as modules due to multiple init/exit functions. Reported-by: NFengguang Wu <wfg@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 6月, 2012 2 次提交
-
-
由 Vipin Kumar 提交于
This patch adds the support for spdif in audio codec. Signed-off-by: Nvipin Kumar <vipin.kumar@st.com> Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Otherwise sparse gets very upset with us. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-