- 03 2月, 2014 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Here's a set of patches for (hopefully) -rc1. Some of them are fixes, but a good number of them also do things such as enable new drivers in the defconfigs for platforms that have such devices, increases coverage of the multiplatform defconfig and some DTS changes that plumbs up some of the devices that now have bindings and driver support. The commit dates are recent; we've mostly collected these fixes in the last few days but I also had to rebuild the branch yesterday to sort out some internal conflicts which reset the timestamps. The changes should have been tested by each platform maintainer already (and few of them have cross-platform impact) so I'm personally not too concerned by it at this time" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ARM: dts: bcm28155-ap: Fix Card Detection GPIO ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers ARM: dts: zynq: Add SDHCI nodes ARM: hisi: don't select SMP ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS ARM: multi_v7: copy most options from tegra_defconfig ARM: iop32x: fix power off handling for the EM7210 board ARM: integrator: restore static map on the CP ARM: msm_defconfig: Enable MSM clock drivers ARM: dts: msm: Add clock controller nodes and hook into uart ARM: OMAP4+: move errata initialization to omap4_pm_init_early ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference ...
-
- 02 2月, 2014 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull misc kbuild changes from Michal Marek: "The non-critical part of kbuild is small this time: - Three fixes for make deb-pkg - A new coccinelle check One of the deb-pkg fixes is a leftover from the last merge window, hence the merge commit" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: deb-pkg: Fix building for MIPS big-endian or ARM OABI deb-pkg: Fix cross-building linux-headers package scripts: Coccinelle script for pm_runtime_* return checks with IS_ERR_VALUE deb-pkg: Inhibit initramfs builders if CONFIG_BLK_DEV_INITRD is not set
-
由 Pali Rohár 提交于
Both proc files are writeable and used for configuring cells. But there is missing correct mode flag for writeable files. Without this patch both proc files are read only. [ It turns out they aren't really read-only, since root can write to them even if the write bit isn't set due to CAP_DAC_OVERRIDE ] Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Carstens 提交于
With commit d8d14bd0 ("fs/compat: fix lookup_dcookie() parameter handling") I changed the type of the len parameter of the lookup_dcookie() syscall. However I missed that there was still a stale declaration in arch/tile/.. which now causes a compile error on tile: In file included from fs/dcookies.c:28:0: include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie' fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie' Simply remove the declaration in the tile architecture, which is only a leftover from before the different compat lookup_dcookie() versions have been merged. The correct declaration is now in include/linux/compat.h The build error was reported by Fenguang's build bot. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "A set of cifs fixes (mostly for symlinks, and SMB2 xattrs) and cleanups" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix check for regular file in couldbe_mf_symlink() [CIFS] Fix SMB2 mounts so they don't try to set or get xattrs via cifs CIFS: Cleanup cifs open codepath CIFS: Remove extra indentation in cifs_sfu_type CIFS: Cleanup cifs_mknod CIFS: Cleanup CIFSSMBOpen cifs: Add support for follow_link on dfs shares under posix extensions cifs: move unix extension call to cifs_query_symlink() cifs: Re-order M-F Symlink code cifs: Add create MFSymlinks to protocol ops struct cifs: use protocol specific call for query_mf_symlink() cifs: Rename MF symlink function names cifs: Rename and cleanup open_query_close_cifs_symlink() cifs: Fix memory leak in cifs_hardlink()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "Several obvious fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Fix mountpoint reference leakage in linkat hfsplus: use xattr handlers for removexattr Typo in compat_sys_lseek() declaration fs/super.c: sync ro remount after blocking writers vfs: unexport the getname() symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull rtl8812ae staging wireless driver from Greg KH: "Here's a single staging driver for a wireless chipset that has shown up in the SteamBox hardware. It is merged separately from the "main" staging pull request to sync up with the wireless api changes that came in from the networking tree. It's self-contained and works for me and others. Larry will be replacing it with a "real" driver for 3.15, but for now this one is needed" * tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8821ae: Enable build by reverting BROKEN marking staging: r8821ae: Fix build problems Staging: rtl8812ae: disable due to build errors Staging: rtl8821ae: add TODO file Staging: rtl8821ae: removed unused functions and variables Staging: rtl8821ae: rc.c: fix up function prototypes Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver
-
由 Rafael J. Wysocki 提交于
Revert commit ef83b078 "PCI: Remove from bus_list and release resources in pci_release_dev()" that made some nasty race conditions become possible. For example, if a Thunderbolt link is unplugged and then replugged immediately, the pci_release_dev() resulting from the hot-remove code path may be racing with the hot-add code path which after that commit causes various kinds of breakage to happen (up to and including a hard crash of the whole system). Moreover, the problem that commit ef83b078 attempted to address cannot happen any more after commit 8a4c5c32 "PCI: Check parent kobject in pci_destroy_dev()", because pci_destroy_dev() will now return immediately if it has already been executed for the given device. Note, however, that the invocation of msi_remove_pci_irq_vectors() removed by commit ef83b078 from pci_free_resources() along with the other changes made by it is not added back because of subsequent code changes depending on that modification. Fixes: ef83b078 (PCI: Remove from bus_list and release resources in pci_release_dev()) Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 2月, 2014 32 次提交
-
-
由 Olof Johansson 提交于
TI_EDMA fell out of automatically selected options in the multi_v7 defconfig due to a select being removed from the davinci Kconfig entry. So we need to re-enable explicitly to not regress some platforms. The rest is just the result of running 'make multi_v7_defconfig + make savedefconfig' to remove entries that are no longer needed due to changed dependencies/selects or defaults. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: NJason Cooper <jason@lakedaemon.net> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Tim Kryger 提交于
When an clock is specified in the device tree, enable it and use it to determine the external clock frequency. Signed-off-by: NTim Kryger <tim.kryger@linaro.org> Reviewed-by: NMarkus Mayer <markus.mayer@linaro.org> Reviewed-by: NMatt Porter <matt.porter@linaro.org> Reviewed-by: NChristian Daudt <bcm@fixthebug.org> Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NChristian Daudt <bcm@fixthebug.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Highlights: - Fix several races in nfs_revalidate_mapping - NFSv4.1 slot leakage in the pNFS files driver - Stable fix for a slot leak in nfs40_sequence_done - Don't reject NFSv4 servers that support ACLs with only ALLOW aces" * tag 'nfs-for-3.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: initialize the ACL support bits to zero. NFSv4.1: Cleanup NFSv4.1: Clean up nfs41_sequence_done NFSv4: Fix a slot leak in nfs40_sequence_done NFSv4.1 free slot before resending I/O to MDS nfs: add memory barriers around NFS_INO_INVALID_DATA and NFS_INO_INVALIDATING NFS: Fix races in nfs_revalidate_mapping sunrpc: turn warn_gssd() log message into a dprintk() NFS: fix the handling of NFS_INO_INVALID_DATA flag in nfs_revalidate_mapping nfs: handle servers that support only ALLOW ACE type.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "The big chunks here are the updates for oxygen driver for Xonar DG devices, which were slipped from the previous pull request. They are device-specific and thus not too dangerous. Other than that, all patches are small bug fixes, mainly for Samsung build fixes, a few HD-audio enhancements, and other misc ASoC fixes. (And this time ASoC merge is less than Octopus, lucky seven :)" * tag 'sound-fix-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (42 commits) ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled ALSA: hda - add headset mic detect quirks for another Dell laptop ALSA: oxygen: Xonar DG(X): cleanup and minor changes ALSA: oxygen: Xonar DG(X): modify high-pass filter control ALSA: oxygen: Xonar DG(X): modify input select functions ALSA: oxygen: Xonar DG(X): modify capture volume functions ALSA: oxygen: Xonar DG(X): use headphone volume control ALSA: oxygen: Xonar DG(X): modify playback output select ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2 ALSA: oxygen: Xonar DG(X): move the mixer code into another file ALSA: oxygen: modify CS4245 register dumping function ALSA: oxygen: modify adjust_dg_dac_routing function ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters function ALSA: oxygen: Xonar DG(X): modify initialization functions ALSA: oxygen: Xonar DG(X): add new CS4245 SPI functions ALSA: oxygen: additional definitions for the Xonar DG/DGX card ALSA: oxygen: change description of the xonar_dg.c file ALSA: oxygen: export oxygen_update_dac_routing symbol ALSA: oxygen: add mute mask for the OXYGEN_PLAY_ROUTING register ALSA: oxygen: modify the SPI writing function ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
-
由 Lorenzo Pieralisi 提交于
This patch fixes a bug/typo in the CCI driver kcalloc usage that inadvertently swapped the parameters order in the kcalloc call and went unnoticed. Reported-by: NXia Feng <xiafeng@allwinnertech.com> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Tim Kryger 提交于
The board schematic states that the "SD_CARD_DET_N gets pulled to GND when card is inserted" so the polarity has been updated to active low. Polarity is now specified with a GPIO define instead of a magic number. Signed-off-by: NTim Kryger <tim.kryger@linaro.org> Reviewed-by: NMatt Porter <matt.porter@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'renesas-dt-fixes2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Second Round of Renesas ARM Based SoC DT Fixes for v3.14 Correct i2c clock references for r8a7790 (R-Car H2) SoC The error was introduced in 72197ca7 ("ARM: shmobile: r8a7790: Reference clocks") which is queued up for v3.14. * tag 'renesas-dt-fixes2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Fabio Estevam 提交于
Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Grygorii Strashko 提交于
Drop automatic selection of TI_EDMA from Keystone Kconfig file, as it produces build warning in case if CONFIG_DMADEVICES is not set: warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE)) Instead enable TI EDMA support from defconfig. Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Barry Song 提交于
instead of listing drivers one by one, use regex patterns to involve all SiRF drivers directly. this also adds sirf UART and watchdog drivers automatically from: drivers/tty/serial/sirfsoc_uart.* drivers/watchdog/sirfsoc_wdt.c Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NBarry Song <Baohua.Song@csr.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebu由 Olof Johansson 提交于
mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Soren Brinkmann 提交于
Add nodes for the Arasan SDHCI controller to Zynq dts files. Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Rob Herring 提交于
SMP is a user configurable option, not a hardware feature and should not be selected. Signed-off-by: NRob Herring <robh@kernel.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Stephen Warren 提交于
DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled by tegra_defconfig. However, this config option no longer exists, so no longer selects DEBUG_FS, and nothing else selects it either. So, "make tegra_defconfig" no longer enables DEBUG_FS in .config. Rebuild tegra_defconfig on top of next-20140424, while manually re-enabling DEBUG_FS. Reasons for removed entries are: - I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT - DRM_PANEL: selected by DRM_TEGRA - NEW_LEDS: selected by many things; at least VT - LEDS_CLASS: selected by many things; at least VT - LEDS_TRIGGERS: selected by many things; at least VT - COMMON_CLK_DEBUG: no longer exists Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NKevin Hilman <khilman@linaro.org>
-
由 Stephen Warren 提交于
multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Linus Walleij 提交于
This board was missed when converting all the others to proper abstracted GPIO handling. Fix it up the right way by requesting and driving GPIO line 0 high through gpiolib to power off the machine. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Linus Walleij 提交于
Commit 78d16321 deleted the static mappings of the core modules, but this static map is still needed on the Integrator/CP (not the Integrator/AP). Restore the static map on the Integrator/CP. Reported-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Stephen Boyd 提交于
This allows us to probe the clock controller devices and boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Stephen Boyd 提交于
Add the necessary DT nodes to probe the clock controllers on MSM devices as well as hook up the uart nodes to the clock controllers. This should allow us to boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Nishanth Menon 提交于
Move all OMAP4 PM errata initializations to centralized location in omap4_pm_init_early. This allows for users to utilize the erratas in various submodules as needed. Reported-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NNishanth Menon <nm@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Strashko, Grygorii 提交于
The same workaround as ff999b8a "ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC ..." need to be applied not only when system is booting, but when MPUSS hits OSWR state through CPUIdle too. Without this WA the same issue is reproduced now on boards PandaES and Tablet/Blaze with SOM OMAP4460 when CONFIG_CPU_IDLE is enabled. After MPUSS has enterred OSWR and waken up: - GIC distributor became disabled forever - scheduling is not performed any more Cc: Kevin Hilman <khilman@linaro.org> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: NTaras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Oleg Drokin 提交于
Recent changes to retry on ESTALE in linkat (commit 442e31ca) introduced a mountpoint reference leak and a small memory leak in case a filesystem link operation returns ESTALE which is pretty normal for distributed filesystems like lustre, nfs and so on. Free old_path in such a case. [AV: there was another missing path_put() nearby - on the previous goto retry] Signed-off-by: NOleg Drokin: <green@linuxhacker.ru> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pyll ARM64 patches from Catalin Marinas: - Build fix with DMA_CMA enabled - Introduction of PTE_WRITE to distinguish between writable but clean and truly read-only pages - FIQs enabling/disabling clean-up (they aren't used on arm64) - CPU resume fix for the per-cpu offset restoring - Code comment typos * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Introduce PTE_WRITE arm64: mm: Remove PTE_BIT_FUNC macro arm64: FIQs are unused arm64: mm: fix the function name in comment of cpu_do_switch_mm arm64: fix build error if DMA_CMA is enabled arm64: kernel: fix per-cpu offset restore on resume arm64: mm: fix the function name in comment of __flush_dcache_area arm64: mm: use ubfm for dcache_line_size
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha由 Linus Torvalds 提交于
Pull alpha updates from Matt Turner: "A pair of changes for alpha. One fixes a networking regression, and the second adds audit syscall support which will help in supporting systemd" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: fix broken network checksum alpha: Enable system-call auditing support.
-
由 Christoph Hellwig 提交于
hfsplus was already using the handlers for get and set operations, and with the removal of can_set_xattr we've now allow operations that wouldn't otherwise be allowed. With this we can also centralize the special-casing of the osx. attrs that don't have prefixes on disk in the osx xattr handlers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Stephan Springl 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Andrew Ruder 提交于
Move sync_filesystem() after sb_prepare_remount_readonly(). If writers sneak in anywhere from sync_filesystem() to sb_prepare_remount_readonly() it can cause inodes to be dirtied and writeback to occur well after sys_mount() has completely successfully. This was spotted by corrupted ubifs filesystems on reboot, but appears that it can cause issues with any filesystem using writeback. Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> CC: Richard Weinberger <richard@nod.at> Co-authored-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jeff Layton 提交于
Leaving getname() exported when putname() isn't is a bad idea. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media updates from Mauro Carvalho Chehab: - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4) - a new dvb frontend for ds2103 chipset (m88ds2103) - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf) - new drivers for R-Car VSP1 - a new radio driver: radio-raremono - a new tuner driver for ts2022 chipset (m88ts2022) - the analog part of em28xx is now a separate module that only load/runs if the device is not a pure digital TV device - added a staging driver for bcm2048 radio devices - the omap 2 video driver (omap24xx) was moved to staging. This driver is for an old hardware and uses a deprecated Kernel internal API. If nobody cares enough to fix it, it would be removed on a couple Kernel releases - the sn9c102 driver was moved to staging. This driver was replaced by gspca, and disabled on some distros, as almost all devices are known to work properly with gspca. It should be removed from kernel on a couple Kernel releases - lots of driver fixes, improvements and cleanups * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits) [media] media: v4l2-dev: fix video device index assignment [media] rc-core: reuse device numbers [media] em28xx-cards: properly initialize the device bitmap [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c [media] Staging: media: Fix quoted string split across line in as102_fe.c [media] media: st-rc: Add reset support [media] m2m-deinterlace: fix allocated struct type [media] radio-usb-si4713: fix sparse non static symbol warnings [media] em28xx-audio: remove needless check before usb_free_coherent() [media] au0828: Fix sparse non static symbol warning Revert "[media] go7007-usb: only use go->dev after allocated" [media] em28xx-audio: provide an error code when URB submit fails [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0 [media] em28xx: make 'em28xx_ctrl_ops' static em28xx-alsa: Fix error patch for init/fini [media] em28xx-audio: flush work at .fini [media] drxk: remove the option to load firmware asynchronously [media] em28xx: adjust period size at runtime ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes and cleanups from Rafael Wysocki: - ACPI device hotplug fix preventing ACPI drivers from binding to device objects that acpi_bus_trim() has been called for and the devices represented by them may not be operational. - Recent cpufreq changes related to the "boost" (turbo) feature broke the acpi-cpufreq error code path causing a NULL pointer dereference to occur on some systems. Fix from Konrad Rzeszutek Wilk. - The log level of a CPU initialization error message added recently needs to be reduced, because the particular BIOS issue indicated by it turns out to be widespread and doesn't really matter for the majority of systems having it. From Jiang Liu. - The regulator API needs to be told to stay away from things on systems with ACPI BIOSes or it may conflict with the BIOS' own handling of voltage regulators. Fix from Mark Brown that works around a 3.13 regression in lm90 on PCs occuring if the regulator API is enabled. - Prevent the Exynos4 devfreq driver from being built on multiplatform, because it depends on things that aren't available during such builds. From Sachin Kamat. - Upstream ACPICA doesn't use the bool type as defined in the kernel, so modify the kernel's ACPICA code to follow the upstream in that respect (only one variable definition is affected) to reduce divergences between the two. From Lv Zheng. - Make the ACPI device PM code use ACPI_COMPANION() instead of its own routine doing the same thing (and invokng ACPI_COMPANION() in the process). - Modify some routines in the ACPI processor driver to follow the common convention and return negative integers on errors. From Hanjun Guo. * tag 'pm+acpi-3.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / scan: Clear match_driver flag in acpi_bus_trim() ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API acpi-cpufreq: De-register CPU notifier and free struct msr on error. ACPICA: Remove bool usage from ACPICA. PM / devfreq: Disable Exynos4 driver build on multiplatform ACPI / PM: Use ACPI_COMPANION() to get ACPI companions of devices ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID" ACPI / processor: Return specific error value when mapping lapic id
-