Add a V4L2 sub-device driver for the Sony IMX258 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
Signed-off-by: NJason Chen <jasonx.z.chen@intel.com>
Signed-off-by: NAndy Yeh <andy.yeh@intel.com>
Signed-off-by: NAlan Chiang <alanx.chiang@intel.com>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Instead of failing the set_fmt() if a unsupported format is requested
set a default one and return the changed format to the user.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reported-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

A V4L2 driver for Renesas R-Car MIPI CSI-2 receiver. The driver
supports the R-Car Gen3 SoCs where separate CSI-2 hardware blocks are
connected between the video sources and the video grabbers (VIN).

Driver is based on a prototype by Koji Matsuoka in the Renesas BSP.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
are located between the video sources (CSI-2 transmitters) and the video
grabbers (VIN) on Gen3 of Renesas R-Car SoC.

Each CSI-2 device is connected to more than one VIN device which
simultaneously can receive video from the same CSI-2 device. Each VIN
device can also be connected to more than one CSI-2 device. The routing
of which links are used is controlled by the VIN devices. There are only
a few possible routes which are set by hardware limitations, which are
different for each SoC in the Gen3 family.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

We are now able to configure a pipeline directly into a local display
list body. Take advantage of this fact, and create a cacheable body to
store the configuration of the pipeline in the pipeline object.

vsp1_video_pipeline_run() is now the last user of the pipe->dl object.
Convert this function to use the cached pipe->stream_config body and
obtain a local display list reference.

Attach the pipe->stream_config body to the display list when needed
before committing to hardware.

Use a flag 'configured' to know when we should attach our stream_config
to the next outgoing display list to reconfigure the hardware in the
event of our first frame, or the first frame following a suspend/resume
cycle.

Our video DL usage now looks like the below output:

dl->body0 contains our disposable runtime configuration. Max 41.
dl_child->body0 is our partition specific configuration. Max 12.
dl->bodies shows our constant configuration and LUTs.

  These two are LUT/CLU:
     * dl->bodies[x]->num_entries 256 / max 256
     * dl->bodies[x]->num_entries 4914 / max 4914

Which shows that our 'constant' configuration cache is currently
utilised to a maximum of 64 entries.

trace-cmd report | \

  dl->body0->num_entries 13 / max 128
  dl->body0->num_entries 14 / max 128
  dl->body0->num_entries 16 / max 128
  dl->body0->num_entries 20 / max 128
  dl->body0->num_entries 27 / max 128
  dl->body0->num_entries 34 / max 128
  dl->body0->num_entries 41 / max 128
  dl_child->body0->num_entries 10 / max 128
  dl_child->body0->num_entries 12 / max 128
  dl->bodies[x]->num_entries 15 / max 128
  dl->bodies[x]->num_entries 16 / max 128
  dl->bodies[x]->num_entries 17 / max 128
  dl->bodies[x]->num_entries 18 / max 128
  dl->bodies[x]->num_entries 20 / max 128
  dl->bodies[x]->num_entries 21 / max 128
  dl->bodies[x]->num_entries 256 / max 256
  dl->bodies[x]->num_entries 31 / max 128
  dl->bodies[x]->num_entries 32 / max 128
  dl->bodies[x]->num_entries 39 / max 128
  dl->bodies[x]->num_entries 40 / max 128
  dl->bodies[x]->num_entries 47 / max 128
  dl->bodies[x]->num_entries 48 / max 128
  dl->bodies[x]->num_entries 4914 / max 4914
  dl->bodies[x]->num_entries 55 / max 128
  dl->bodies[x]->num_entries 56 / max 128
  dl->bodies[x]->num_entries 63 / max 128
  dl->bodies[x]->num_entries 64 / max 128
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Currently the entities store their configurations into a display list.
Adapt this such that the code can be configured into a body directly,
allowing greater flexibility and control of the content.

All users of vsp1_dl_list_write() are removed in this process, thus it
too is removed.

A helper, vsp1_dl_list_get_body0() is provided to access the internal body0
from the display list.

[laurent.pinchart+renesas@ideasonboard.com: Don't remove blank line unnecessarily]
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The entities provide a single .configure operation which configures the
object into the target display list, based on the vsp1_entity_params
selection.

Split the configure function into three parts, '.configure_stream()',
'.configure_frame()', and '.configure_partition()' to facilitate
splitting the configuration of each parameter class into separate
display list bodies.

[laurent.pinchart+renesas@ideasonboard.com: Blank line reformatting, remote unneeded local variable initialization]
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Extend the display list body with a reference count, allowing bodies to
be kept as long as a reference is maintained. This provides the ability
to keep a cached copy of bodies which will not change, so that they can
be re-applied to multiple display lists.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Adapt the dl->body0 object to use an object from the body pool. This
greatly reduces the pressure on the TLB for IPMMU use cases, as all of
the lists use a single allocation for the main body.

The CLU and LUT objects pre-allocate a pool containing three bodies,
allowing a userspace update before the hardware has committed a previous
set of tables.

Bodies are no longer 'freed' in interrupt context, but instead released
back to their respective pools. This allows us to remove the garbage
collector in the DLM.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Each display list allocates a body to store register values in a dma
accessible buffer from a dma_alloc_wc() allocation. Each of these
results in an entry in the IOMMU TLB, and a large number of display list
allocations adds pressure to this resource.

Reduce TLB pressure on the IPMMUs by allocating multiple display list
bodies in a single allocation, and providing these to the display list
through a 'body pool'. A pool can be allocated by the display list
manager or entities which require their own body allocations.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The body write function relies on the code never asking it to write more
than the entries available in the list.

Currently with each list body containing 256 entries, this is fine, but
we can reduce this number greatly saving memory. In preparation of this
add a level of protection to catch any buffer overflows.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Throughout the codebase, the term 'fragment' is used to represent a
display list body. This term duplicates the 'body' which is already in
use.

The datasheet references these objects as a body, therefore replace all
mentions of a fragment with a body, along with the corresponding
pluralised terms.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The suspend and resume handlers are only utilised by video pipelines,
yet the functions currently reside in the vsp1_pipe object.

This causes an issue with resume, as the functions incorrectly call
vsp1_pipeline_run() directly instead of processing the video object
through vsp1_video_pipeline_run().

Move the functions to the video object, renaming accordingly and update
the resume handler to call vsp1_video_pipeline_run() as appropriate.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Commit 372b2b03 ("media: v4l: vsp1: Release buffers in
start_streaming error path") introduced a helper to clean up buffers on
error paths, but inadvertently changed the code such that only the
output WPF buffers were cleaned, rather than the video node being
operated on.

Since then vsp1_video_cleanup_pipeline() has grown to perform both video
node cleanup, as well as pipeline cleanup. Split the implementation into
two distinct functions that perform the required work, so that each
video node can release its buffers correctly on streamoff. The pipe
cleanup that was performed in the vsp1_video_stop_streaming() (releasing
the pipe->dl) is moved to the function for clarity.

Fixes: 372b2b03 ("media: v4l: vsp1: Release buffers in start_streaming error path")

Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

VIDEO_RENESAS_VSP1 depends on ARCH_RENESAS && OF.
As ARCH_RENESAS implies OF, the latter can be dropped.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The CEC receive buffer was not always cleared correctly. The
datasheet was a bit confusing since sometimes it mentioned that the
bit in CEC register 0x4a had to be toggled, and sometimes it suggested
it was a 'Clear-on-write' bit. But it really needs to be toggled.

The patch also enables/disables the CEC irqs after the other irq are
enabled/disabled instead of doing it before. It may not matter, but it
feels more logical to do it in that order, and the implementation that
we (Cisco) have used until now and that is known to be reliable also
did it in that order.
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Set the DMA_MASK and stop using the GFP_DMA flag
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Set the DMA_MASK and stop using the GFP_DMA flag
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Clarify the description of status bits, particularly w.r.t. ERROR and NACK.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

In function 'strncpy',
    inlined from 'soc_camera_platform_probe' at drivers/media/platform/soc_camera/soc_camera_platform.c:162:2:
include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

In function 'strncpy',
    inlined from 'ceu_notify_complete' at drivers/media/platform/renesas-ceu.c:1378:2:
include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 11 bytes from a string of the same length [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/staging/media/imx/imx-media-capture.c: In function 'vidioc_querycap':
drivers/staging/media/imx/imx-media-capture.c:76:2: warning: 'strncpy' output truncated copying 15 bytes from a string of length 17 [-Wstringop-truncation]
  strncpy(cap->driver, "imx-media-capture", sizeof(cap->driver) - 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

In function 'strncpy',
    inlined from 'vidioc_g_audio' at media-git/drivers/media/usb/hdpvr/hdpvr-video.c:876:2:
media-git/include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

media-git/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'vidioc_querycap':
media-git/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1317:2: warning: 'strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation]
  strncpy(cap->card, dev->vfd_enc->name, sizeof(cap->card) - 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
media-git/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c: In function 'vidioc_querycap':
media-git/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:275:2: warning: 'strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation]
  strncpy(cap->card, dev->vfd_dec->name, sizeof(cap->card) - 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

In file included from media-git/include/linux/bitmap.h:9,
                 from media-git/include/linux/cpumask.h:12,
                 from media-git/arch/x86/include/asm/cpumask.h:5,
                 from media-git/arch/x86/include/asm/msr.h:11,
                 from media-git/arch/x86/include/asm/processor.h:21,
                 from media-git/arch/x86/include/asm/cpufeature.h:5,
                 from media-git/arch/x86/include/asm/thread_info.h:53,
                 from media-git/include/linux/thread_info.h:38,
                 from media-git/arch/x86/include/asm/preempt.h:7,
                 from media-git/include/linux/preempt.h:81,
                 from media-git/include/linux/spinlock.h:51,
                 from media-git/include/linux/seqlock.h:36,
                 from media-git/include/linux/time.h:6,
                 from media-git/include/linux/stat.h:19,
                 from media-git/include/linux/module.h:10,
                 from media-git/drivers/staging/media/zoran/zoran_driver.c:44:
In function 'strncpy',
    inlined from 'zoran_querycap' at media-git/drivers/staging/media/zoran/zoran_driver.c:1512:2:
media-git/include/linux/string.h:246:9: warning: '__builtin_strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/usb/go7007/go7007-v4l2.c:637:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
drivers/media/usb/go7007/go7007-fw.c:1507:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The API limitation described here is about the CROP API, not about the
entire V4L2.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Split section "Comparison with old cropping API" in paragraphs for
easier reading and improve visible links text.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

These files have an automatically-generated numbering. Rename them
with a name that suggests their meaning.
Reported-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Having two somewhat similar and largely overlapping APIs is confusing,
especially since the older one appears in the docs before the newer
and most featureful counterpart.

Clarify all of this in several ways:
 - swap the two sections
 - give a name to the two APIs in the section names
 - add a note at the beginning of the CROP API section
 - update note about VIDIOC_CROPCAP

Also remove a note that is incorrect (correct wording is in
vidioc-cropcap.rst).
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Fix typos in the selection documentation:
 - over -> cover
 - BONDS -> BOUNDS
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This driver hasn't been tested in a long, long time. The hardware is
ancient and pretty much obsolete. This driver also needs to be converted
to newer media frameworks (vb2!) but due to the lack of time and interest
that is unlikely to happen.

So this driver is a prime candidate for removal. If someone is interested
in working on this driver to prevent its removal, then please contact the
linux-media mailinglist.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The pixel rate, as reported by the V4L2_CID_PIXEL_RATE control, must
include both horizontal and vertical blanking. Both the AFE and HDMI
receiver program it incorrectly:

- The HDMI receiver goes to the trouble of removing blanking to compute
the rate of active pixels. This is easy to fix by removing the
computation and returning the incoming pixel clock rate directly.

- The AFE performs similar calculation, while it should simply return
the fixed pixel rate for analog sources, mandated by the ADV748x to be
14.3180180 MHz.

[Niklas: Update AFE fixed pixel rate]
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This driver is currently specifying a vb2_queue lock,
which means it straightforward to implement wait_prepare
and wait_finish.

Having these callbacks releases the queue lock while blocking,
which improves latency by allowing for example streamoff
or qbuf operations while waiting in dqbuf.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

mode_table[] has 3 members that are accessed based on their index, which
makes worth using an array.

The other members are always accessed with a constant index. This added
indirection gives no improvement and only makes code more verbose.

Remove these pointers from the array and access them directly.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Most registers are defined using the name used in the datasheet.
E.g. the defines for the HMAX register are IMX274_HMAX_REG_*.

Rename the SHR and VMAX register accordingly. Also move them close to
related registers: SHR close to SVR, VMAX close to HMAX.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

struct imx274_frmfmt is instantiated only in the imx274_formats[]
array, where imx274_formats[N].mode always equals N (via enum
imx274_mode).  So .mode carries no information, and unsurprisingly it
is never used.

mbus_code is never used because the 12 bit modes are not implemented.

The colorspace member is also never used, which is normal since the
imx274 sensor can output only one colorspace.

Let's get rid of all of them.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

imx274_s_frame_interval() already has a direct pointer to the v4l2
exposure control, so reuse it to simplify code.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

interal->interval
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Document the unit to avoid having to look through the code to compute it.
Also clarify that these are min and max values.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>