Remove obsoleted "idex=reset" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Then remove corresponding code from ide_probe_port()
and no longer used ->reset field from ide_hwif_t.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "idex=serialize" kernel parameter
(it has been obsoleted since 1 Nov 2004).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add "ignore_cable" parameter:

* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
  (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")

* "ignore_cable=[interface_number]" module parameter (for ide_core module)
  if IDE is compiled as module

v2:
* Add ide_port_apply_params() helper
  - use it in ide_device_add_all() and ide_scan_port().

* Make it possible to later disable ignoring cable detection by passing
  "[interface_number]:0" to /sys/module/ide_core/parameters/ignore_cable
  (however sysfs interface is not enabled yet since it needs some other
   IDE changes to make it work reliable).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

	Fallout from commit ac95beedSigned-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Export ide_dma_exec_cmd() and __ide_dma_test_irq().

* Constify struct ide_dma_ops.

* Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma()
  (it is later overriden by ide_init_port() if needed) and drop
  'const struct ide_port_info *d' argument.

While at it:

* Rename __ide_dma_test_irq() to ide_dma_test_irq().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add struct ide_dma_ops and convert core code + drivers to use it.

While at it:

* Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.

* Drop "ide_" "infixes" from DMA methods.

* au1xxx-ide.c:
  - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()

* pdc202xx_old.c:
  - drop "old_" "infixes" from DMA methods

* siimage.c:
  - add siimage_dma_test_irq() helper
  - print SATA warning in siimage_init_one()

* Remove no longer needed ->init_hwif implementations.

v2:
* Changes based on review from Sergei:
  - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/
  - s/drive->hwif/hwif/ in idefloppy_pc_intr().
  - fix patch description w.r.t. au1xxx-ide changes
  - fix au1xxx-ide build
  - fix naming for cmd64*_dma_ops
  - drop "ide_" and "old_" infixes
  - s/hpt3xxx_dma_ops/hpt37x_dma_ops/
  - s/hpt370x_dma_ops/hpt370_dma_ops/
  - use correct DMA ops for HPT302/N, HPT371/N and HPT374
  - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/

v3:
* Two bugs slipped in v2 (noticed by Sergei):
  - use correct DMA ops for HPT374 (for real this time)
  - handle HPT370/HPT370A properly
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_SERIALIZE_DMA host flag to serialize ports
  if DMA is available and handle it in ide_init_port().

* Convert sl82c105 host driver to use this new flag.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make sl82c105_bridge_revision() return 'u8' instead of 'unsigned long'.

* Check bridge revision in sl82c105_init_one().

While at:

* Use proper KERN_ level for printk().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Pass 'ide_hwif_t *hwif' instead of '_auide_hwif *auide' to
  auide_ddma_init().

* Add 'const struct ide_port_info *d' argument to auide_ddma_init().

* Convert the driver to use ->init_dma method.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move DMA setup to palm_bk3710_init_dma().

* Convert the driver to use ->init_dma method.

Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move dma_base check from sgiioc4_ide_setup_pci_device()
  to ide_dma_sgiioc4().

* Replace ide_dma_sgiioc4() 'unsigned long dma_base' argument
  by 'const struct ide_port_info *d'.

* Move hwif->INB setup from ide_init_sgiioc4() to
  sgiioc4_ide_setup_pci_device().

* Move ide_init_sgiioc4() call from sgiioc4_ide_setup_pci_device()
  to ide_dma_sgiioc4().

* Convert the driver to use ->init_dma method.

Cc: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'const struct ide_port_info *d' argument to icside_dma_init().

* Make icside_dma_init() return an error value and add icside_dma_off_init()
  (->init_dma implementation for case when DMA cannot be enabled).

* Convert the driver to use ->init_dma method.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move pmif->dma_regs check from pmac_ide_setup_device() to
  pmac_ide_init_dma().

* Get 'pmif' from 'hwif->hwif_data' in pmac_ide_init_dma() and replace
  'pmac_ide_hwif_t *pmif' argument by 'const struct ide_port_info *d'.

* Add pmac_ide_init_dma() implementation for CONFIG_BLK_DEV_IDEDMA_PMAC=n
  case and convert the driver to use ->init_dma method.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make ide_hwif_setup_dma() return an error value.

* Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase'
  to ->init_dma method and make it return an error value.

* Rename ide_get_or_set_dma_base() to ide_pci_dma_base(),
  change ordering of its arguments and then export it.

* Export ide_pci_set_master().

* Do complete DMA setup inside ->init_dma method and update ->init_dma
  users accordingly.

* Sanitize code for DMA setup in ide_init_port().

v2:
* Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs
  (from Jiri Slaby <jirislaby@gmail.com>):

  Fix following compiler warning by returning EINVAL:

  In file included from ANYTHING-INCLUDING-IDE.H:45:
  include/linux/ide.h: In function ‘ide_hwif_setup_dma’:
  include/linux/ide.h:1022: warning: no return statement in function returning non-void

Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Always use "fast" MWDMA support and remove dma_{black,white}_list
(they were based on completely bogus ->ide_dma_check implementation
which didn't set neither the host controller timings nor the device
for the desired transfer mode).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* There is no need to call ide_release_dma_engine().

* Move the code up to (and including) ide_allocate_dma_engine()
  call to the callers of ide_setup_dma().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out setting PCI bus-mastering from ide_hwif_setup_dma()
to ide_pci_set_master() helper.

While at it:

* don't read PCI Command register if not necessary

* use PCI device name instead of hwif->name

* cleanup ide_hwif_setup_dma() a bit
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Export ide_allocate_dma_engine() and use it in trm290 host driver.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Skip DMA initialization completely on revs < 0x20 by setting IDE_HFLAG_NO_DMA
host flag and resetting DMA host masks in alim15x3_init_one() (currently
ide_hwif_setup_dma() will try to obtain DMA base and setup PCI bus-mastering
but init_dma_ali15x3() will fail).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Do PDC202xx specific DMA initialization in init_chipset_pdc202xx()
and remove no longer needed init_dma_pdc202xx().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Nowadays BIOS info is not very useful and only confuses users since:

- IDE always tries to use DMA

- BIOS info may not be accurate with modular IDE/libata
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use hwif->name instead of cds->name in ide_allocate_dma_engine().

* Use pci_name(dev) instead of cds->name in init_dma_pdc202xx().

* Remove no longer needed ->cds field from ide_hwif_t.

v2:

* scc_pata.c also needs to be updated now (noticed by Stephen Rothwell).

There should be no functional changes caused by this patch.

Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* ide_mapped_mmio_dma() and ide_iomio_dma() are called only by
  ide_dma_iobase() so inline them there.

* ide_dma_iobase() is called only by ide_setup_dma() so inline
  it there.

* Setup hwif->extra_base also if hwif->mmio flag is set.

There should be no functional changes casued by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Always setup hwif->extra_base in ide_iomio_dma() and remove
no longer needed ->extra field from struct ide_port_info.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

__FUNCTION__ is gcc-specific, use __func__

[bart: fix checkpatch.pl errors in ide-lib.c and ppc/mpc8xx.c while at it]
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This function was simply a wrapper for a test_bit() macro so remove it and
use the macro instead.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It is no longer needed to set hwif->mmio flag to tell IDE layer to not
manage resources so cleanup host drivers that used hwif->mmio flag only
for this purpose.

Ditto for ide_legacy_init_one().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove no longer used ide_hwif_request_regions() and hwif_request_region().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Reserve PCI BARs 0-3 (0-1 for single port controllers) in
  ide_pci_enable() and remove ide_hwif_request_regions() call
  from ide_device_add_all() (also cleanup resource management
  in scc_pata host driver).

* Fix handling of PCI BAR 4 in ide_pci_enable(), then cleanup
  ide_iomio_dma() (+ init_hwif_trm290() in trm290 host driver)
  and remove ide_release[_iomio]_dma().

v2:
* Fixup trm290 host driver.

v3:
* Because of scc_pata host driver changes we need to call
  pci_request_selected_regions() also in setup_mmio_scc().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Tell IDE layer to not manage resources by setting hwif->mmio flag.

* Use {request,release}_region() for resources management.

* Use driver name for resources management.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Tell IDE layer to not manage resources by setting hwif->mmio flag.

* Use {request,release}_region() for resources management.

* Set ->name field of 'struct ide_port_info' instances in legacy VLB
  host drivers and use driver name for resources management.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Move the common code for primary/seconary port setup from
ide_legacy_device_add() to ide_legacy_init_one().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Tell IDE layer to not manage resources by setting hwif->mmio flag.

* Use {request,release}_region() for resources management.

* Use driver name for resources management.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Tell IDE layer to not manage resources by setting hwif->mmio flag.

* Use {request,release}_region() for resources management.

* Use driver name for resources management.

* Remove no longer needed 'hwif->chipset == ide_4drives' handling
  from ide_device_add_all().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Tell IDE layer to not manage resources by setting hwif->mmio flag.

* Use {request,release}_region() for resources management.

* Use driver name for resources management.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

All host drivers using ide_unregister()/module_exit() have been fixed
to manage resources themselves so this function can be removed now.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make idecs_register() return pointer to hwif structure instead of
  hwif's index.

* Store pointer to hwif structure instead of hwif's index in ide_info_t
  (fixes ide-cs for IDE[6-9]_MAJOR major numbers).

* Remove no longer needed ide_major[].

* Tell IDE layer to not manage resources by setting hwif->mmio flag.

* Use {request,release}_region() for resources management.

* Use driver name for resources management.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Tell IDE layer to not manage resources by setting hwif->mmio flag.

* Use {request,release}_region() for resources management.

* Use driver name for resources management.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>