This local symbol is used only in this file.
Fix the following sparse warnings:

drivers/crypto/sahara.c:420:6: warning: symbol 'sahara_watchdog' was not declared. Should it be static?
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes a bug that is triggered when cts(cbc(aes)) is used with
nx-crypto driver on input larger than 32 bytes.

The chaining value from co-processor was not being saved. This value is
needed because it is used as the IV by cts(cbc(aes)).
Signed-off-by: NFionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The co-processor has several limits regarding the length of
scatter/gather lists and the total number of bytes in it. These limits
are available in the device tree, as following:

 - "ibm,max-sg-len": maximum number of bytes of each scatter/gather
   list.

 - "ibm,max-sync-cop": used for synchronous operations, it is an array
   of structures that contains information regarding the limits that
   must be considered for each mode and operation. The most important
   limits in it are:
   	- The total number of bytes that a scatter/gather list can hold.
	- The maximum number of elements that a scatter/gather list can
	  have.

This patch updates the NX driver to perform several hyper calls if
needed in order to always respect the length limits for scatter/gather
lists.
Reviewed-by: NFionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: NJoy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The co-processor receives data to be hashed through scatter/gather lists
pointing to physical addresses. When a vmalloc'ed data is given, the
driver must calculate the physical address to each page of the data.

However the current version of it just calculates the physical address
once and keeps incrementing it even when a page boundary is crossed.
This patch fixes this behaviour.
Reviewed-by: NFionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: NJoy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_kzalloc() to make cleanup paths simpler.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Using devm_request_irq() rather than request_irq().
So removing free_irq() calls from the probe error
path and the remove handler.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for the OMAP5 version of the SHAM module
that is present on OMAP5 and AM43xx SoCs.

This module is very simialar to OMAP4 version of SHAM module,
and adds SHA384 SHA512 hardware-accelerated hash functions to it.
To handle the higher digest size of SHA512, few SHA512_DIGEST_i
(i=1-16, and first 8 registers are duplicated from SHA_DIGEST_i
registers) registers are added at the end of register set.
So adding the above register offsets and module info in pdata.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adding support for SHA348 and SHA512 in addition to MD5, SHA1, SHA224
SHA256 that the omap sha module supports.

In order to add the support
- Removed hard coded register offsets and passing offsets from pdata
- Updating Flag offsets so that they can be used for SHA256 and SHA512
- Adding the algo info.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Logging messages without newlines are possibly interleaved
with other messages.  Add terminating newlines to avoid
this.

Other miscellaneous changes:

Make arrays const to reduce data size
Add pr_fmt to prefix pr_<level>, remove now unused DEV_DBG_NAME
Coalesce formats, align arguments
Remove unnecessary OOM messages as dump_stack is already done
Remove unnecessary cast of void *
Change kzalloc(sizeof(struct)...) to kzalloc(sizeof(*var), ...)
Reduce indents in struct definitions
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the dependency of RNG instantiation on Job Ring. Now
RNG instantiation for devices with RNG version > 4 is done
by directly programming DECO 0.
Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

DESC_JOB_IO_LEN is a generic macro which indicates the space required in
the descriptor for placing SEQIN/OUT commands, job descriptor header,
shared descriptor pointer. Moving it to descriptor construction file
which can be supposedly included by different algo offload files.

Change-Id: Ic8900990d465e9079827b0c7fcacc61766d7efb6
Signed-off-by: NVakul Garg <vakul@freescale.com>
Reviewed-by: NGeanta Neag Horia Ioan-B05471 <horia.geanta@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use dmaengine_submit instead of calling desc->tx_submit manually.
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use dmaengine_prep_slave_sg inline function instead of going through the
structures manually.
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use dmaengine_device_control inline function instead of going through the
structures manually.
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add missing __iomem to struct cryp_register pointers, this solve some
"incorrect type in initializer (different address spaces)" sparse
warnings.
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add missing static qualifiers to hash_process_data and hash_hw_final.
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Always use readl when reading memory mapped registers.
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

These symbols are referenced only in this file and hence
should be static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Tested-by: NTobias Rauter <tobiasrauter@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use NULL instead of 0 for pointer variables.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Tested-by: NTobias Rauter <tobiasrauter@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

devm_* APIs are device managed and make cleanup and exit
code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Tested-by: NTobias Rauter <tobiasrauter@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Tested-by: NTobias Rauter <tobiasrauter@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Calling runtime PM API for every block causes serious perf hit to
crypto operations that are done on a long buffer.
As crypto is performed on a page boundary, encrypting large buffers can
cause a series of crypto operations divided by page. The runtime PM API
is also called those many times.

We call runtime_pm_get_sync only at beginning on the session (cra_init)
and runtime_pm_put at the end. This result in upto a 50% speedup as below.
This doesn't make the driver to keep the system awake as runtime get/put
is only called during a crypto session which completes usually quickly.

Before:
root@beagleboard:~# time -v openssl speed -evp aes-128-cbc
Doing aes-128-cbc for 3s on 16 size blocks: 13310 aes-128-cbc's in 0.01s
Doing aes-128-cbc for 3s on 64 size blocks: 13040 aes-128-cbc's in 0.04s
Doing aes-128-cbc for 3s on 256 size blocks: 9134 aes-128-cbc's in 0.03s
Doing aes-128-cbc for 3s on 1024 size blocks: 8939 aes-128-cbc's in 0.01s
Doing aes-128-cbc for 3s on 8192 size blocks: 4299 aes-128-cbc's in 0.00s

After:
root@beagleboard:~# time -v openssl speed -evp aes-128-cbc
Doing aes-128-cbc for 3s on 16 size blocks: 18911 aes-128-cbc's in 0.02s
Doing aes-128-cbc for 3s on 64 size blocks: 18878 aes-128-cbc's in 0.02s
Doing aes-128-cbc for 3s on 256 size blocks: 11878 aes-128-cbc's in 0.10s
Doing aes-128-cbc for 3s on 1024 size blocks: 11538 aes-128-cbc's in 0.05s
Doing aes-128-cbc for 3s on 8192 size blocks: 4857 aes-128-cbc's in 0.03s

While at it, also drop enter and exit pr_debugs, in related code. tracers
can be used for that.

Tested on a Beaglebone (AM335x SoC) board.
Signed-off-by: NJoel A Fernandes <joelagnel@ti.com>
Acked-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The sahara crypto driver has an incorrect MODULE_DEVICE_TABLE, which
prevents us from actually building this driver as a loadable module.

sahara_dt_ids is a of_device_id array, so we have to use
MODULE_DEVICE_TABLE(of, ...).
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

free_irq() expects the same pointer that was passed to request_irq(), otherwise
the IRQ is not freed.

The issue was found using the following coccinelle script:

<smpl>
@r1@
type T;
T devid;
@@
request_irq(..., devid)

@r2@
type r1.T;
T devid;
position p;
@@
free_irq@p(..., devid)

@@
position p != r2.p;
@@
*free_irq@p(...)
</smpl>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch enables the DCP crypto functionality on imx28.
Currently, only aes-128-cbc is supported.
Moreover, the dcpboot misc-device, which is used by Freescale's
SDK tools and uses a non-software-readable OTP-key, is added.

Changes of v2:
- ring buffer for hardware-descriptors
- use of ablkcipher walk
- OTP key encryption/decryption via misc-device
  (compatible to Freescale-SDK)
- overall cleanup

The DCP is also capable of sha1/sha256 but I won't be able to add
that anytime soon.
Tested with built-in runtime-self-test, tcrypt and openssl via
cryptodev 1.6 on imx28-evk and a custom built imx28-board.
Signed-off-by: NTobias Rauter <tobias.rauter@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add Class Context SRC / DEST flags for the LOAD & STORE commands
Signed-off-by: NAndrei Varvara <andrei.varvara@freescale.com>
Reviewed-by: NPhillips Kim-R1AAHA <Kim.Phillips@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add define for "Adjust Output Frame Length" in order to
set the AOFL bit in the IPsec ESP Decapsulation PDB.
Signed-off-by: NAnca-Jeanina Floarea <anca.floarea@freescale.com>
Signed-off-by: NAndrei Varvara <andrei.varvara@freescale.com>
Reviewed-by: NPhillips Kim-R1AAHA <Kim.Phillips@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

add defines for:
    append load immediate command
    setting SEQ LIODN equal to the Non-SEQ LIODN for the job
    replace job descriptor command
Signed-off-by: NAndrei Varvara <andrei.varvara@freescale.com>
Reviewed-by: NPhillips Kim-R1AAHA <Kim.Phillips@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Store command has options to overwrite the Job Desc, Shared Desc or
the entire Descriptor in memory, using the address from
which the Descriptor was fetched.
Signed-off-by: NAndrei Varvara <andrei.varvara@freescale.com>
Reviewed-by: NPhillips Kim-R1AAHA <Kim.Phillips@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

added all supported math funtion on 8 byte boundary with
immediate flag bit set automatically

added MATH_SRC0_DPOVRD & MATH_SRC1_DPOVRD

The function/defines above are needed for creating descriptors
longer than 64 words
Signed-off-by: NAndrei Varvara <andrei.varvara@freescale.com>
Reviewed-by: NPhillips Kim-R1AAHA <Kim.Phillips@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Perform 32-bit left shift of DEST and concatenate with
left 32 bits of SRC1. {DEST[31:0],SRC1[63:32]}
Signed-off-by: NAndrei Varvara <andrei.varvara@freescale.com>
Acked-by: NMihai Serb <mihai.serb@freescale.com>
Reviewed-by: NPhillips Kim-R1AAHA <Kim.Phillips@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In case Store command is used with overwrite Shared Descriptor
feature there is no need for pointer, it is using the
address from which the Shared Descriptor was fetched.
Signed-off-by: NAndrei Varvara <andrei.varvara@freescale.com>
Reviewed-by: NPhillips Kim-R1AAHA <Kim.Phillips@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEQ IN PTR command does not require pointer if RTO or PRE bit is set
Updated desc_constr.h accordingly.
Signed-off-by: NAndrei Varvara <andrei.varvara@freescale.com>
Reviewed-by: NPhillips Kim-R1AAHA <Kim.Phillips@freescale.com>
Reviewed-by: NFleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

By providing an OF match table with a suitable compatible string, we
can ensure the ux500-hasht driver is probed by supplying an associated
DT node in a given platform's Device Tree.

Cc: linux-crypto@vger.kernel.org
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

By providing an OF match table with a suitable compatible string, we
can ensure the ux500-crypt driver is probed by supplying an associated
DT node in a given platform's Device Tree.

Cc: linux-crypto@vger.kernel.org
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig symbol EXPERIMENTAL was removed in v3.9. So this dependency
makes it impossible to set CRYPTO_DEV_SAHARA. It's unlikely that this is
what is intended, so let's remove this dependency.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>