提交 · e45e0003f60d3e9d62d9bb42d72efbbada7132bc · openeuler / Kernel

08 10月, 2019 10 次提交

drm/i915/tgl: Add DC3CO required register and bits · e45e0003

由 Anshuman Gupta 提交于 10月 07, 2019

Adding following definition to i915_reg.h
1. DC_STATE_EN register DC3CO bit fields and masks.
   DC3CO enable bit will be used by driver to make DC3CO
   ready for DMC f/w and status bit will be used as DC3CO
   entry status.
2. Transcoder EXITLINE register and its bit fields and mask.
   Transcoder EXITLINE enable bit represents PSR2 idle frame
   reset should be applied at exit line and exitlines mask
   represent required number of scanlines at which DC3CO
   exit happens.

   B.Specs:49196

v1: Use of REG_BIT and using extra space for EXITLINE_ macro
    definition. [Animesh]
v2: Grouping EXITLINE reg bits with EXITLINE(trans) define,
    no functional change. [Ville]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NAnimesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007094607.2111-1-anshuman.gupta@intel.com

e45e0003

drm/i915/perf: Set the exclusive stream under perf->lock · a4c969d1

由 Chris Wilson 提交于 10月 07, 2019

The BKL struct_mutex is no more, the only serialisation we required for
setting the exclusive stream is already managed by ce->pin_mutex in
gen8_configure_all_contexts(). As such, we can manipulate
i915_perf.exclusive_stream underneath our own (already held) perf->lock.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007140812.10963-2-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20191007210942.18145-2-chris@chris-wilson.co.uk

a4c969d1

drm/i915/perf: Wean ourselves off dev_priv · 8f8b1171

由 Chris Wilson 提交于 10月 07, 2019

Use the local uncore accessors for the GT rather than using the [not-so]
magic global dev_priv mmio routines. In the process, we also teach the
perf stream to use backpointers to the i915_perf rather than digging it
out of dev_priv.

v2: Rebase onto i915_perf_types.h
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20191007140812.10963-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20191007210942.18145-1-chris@chris-wilson.co.uk

8f8b1171

drm/i915: Fix Kconfig indentation · d30213e5

由 Krzysztof Kozlowski 提交于 10月 07, 2019

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007173346.9379-1-krzk@kernel.org

d30213e5

drm/i915/gt: Treat a busy timeline as 'active' while waiting · a1b58ee3

由 Chris Wilson 提交于 10月 06, 2019

If we cannot claim the timeline->mutex while preparing for a wait on it,
we have to skip the timeline. In doing so, treat it as active so that
under a intel_gt_wait_for_idle() loop, we repeat the wait after
scheduling away.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006165002.30312-4-chris@chris-wilson.co.uk

a1b58ee3

drm/i915/selftests: Appease lockdep · 1664f35a

由 Chris Wilson 提交于 10月 04, 2019

Disable irqs around updating the context image to keep lockdep happy:

<4>[  673.483340] WARNING: possible irq lock inversion dependency detected
<4>[  673.483342] 5.4.0-rc1-CI-Trybot_5118+ #1 Tainted: G     U
<4>[  673.483342] --------------------------------------------------------
<4>[  673.483343] swapper/2/0 just changed the state of lock:
<4>[  673.483344] ffff88845db885a0 (&i915_request_get(rq)->submit/1){-...}, at: __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.483387] but this lock took another, HARDIRQ-unsafe lock in the past:
<4>[  673.483388]  (&ce->pin_mutex/2){+...}
<4>[  673.483389]

                  and interrupts could create inverse lock ordering between them.

<4>[  673.483390]
                  other info that might help us debug this:
<4>[  673.483390] Chain exists of:
                    &i915_request_get(rq)->submit/1 --> &engine->active.lock --> &ce->pin_mutex/2

<4>[  673.483392]  Possible interrupt unsafe locking scenario:

<4>[  673.483392]        CPU0                    CPU1
<4>[  673.483393]        ----                    ----
<4>[  673.483393]   lock(&ce->pin_mutex/2);
<4>[  673.483394]                                local_irq_disable();
<4>[  673.483395]                                lock(&i915_request_get(rq)->submit/1);
<4>[  673.483396]                                lock(&engine->active.lock);
<4>[  673.483396]   <Interrupt>
<4>[  673.483397]     lock(&i915_request_get(rq)->submit/1);
<4>[  673.483398]
                   *** DEADLOCK ***

<4>[  673.483398] 2 locks held by swapper/2/0:
<4>[  673.483399]  #0: ffff8883f61ac9b0 (&(&gt->irq_lock)->rlock){-.-.}, at: gen11_gt_irq_handler+0x42/0x280 [i915]
<4>[  673.483433]  #1: ffff88845db8c418 (&(&rq->lock)->rlock){-.-.}, at: intel_engine_breadcrumbs_irq+0x34a/0x5a0 [i915]
<4>[  673.483463]
                  the shortest dependencies between 2nd lock and 1st lock:
<4>[  673.483466]   -> (&ce->pin_mutex/2){+...} ops: 614520 {
<4>[  673.483468]      HARDIRQ-ON-W at:
<4>[  673.483471]                         lock_acquire+0xa7/0x1c0
<4>[  673.483501]                         live_unlite_restore+0x1d8/0x6c0 [i915]
<4>[  673.483543]                         __i915_subtests+0xb8/0x210 [i915]
<4>[  673.483581]                         __run_selftests+0x112/0x170 [i915]
<4>[  673.483615]                         i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.483644]                         i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.483646]                         pci_device_probe+0x9e/0x120
<4>[  673.483648]                         really_probe+0xea/0x420
<4>[  673.483649]                         driver_probe_device+0x10b/0x120
<4>[  673.483651]                         device_driver_attach+0x4a/0x50
<4>[  673.483652]                         __driver_attach+0x97/0x130
<4>[  673.483653]                         bus_for_each_dev+0x74/0xc0
<4>[  673.483654]                         bus_add_driver+0x142/0x220
<4>[  673.483655]                         driver_register+0x56/0xf0
<4>[  673.483657]                         do_one_initcall+0x58/0x2ff
<4>[  673.483659]                         do_init_module+0x56/0x1f8
<4>[  673.483660]                         load_module+0x243e/0x29f0
<4>[  673.483661]                         __do_sys_finit_module+0xe9/0x110
<4>[  673.483662]                         do_syscall_64+0x4f/0x210
<4>[  673.483665]                         entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.483665]      INITIAL USE at:
<4>[  673.483667]                        lock_acquire+0xa7/0x1c0
<4>[  673.483698]                        live_unlite_restore+0x1d8/0x6c0 [i915]
<4>[  673.483733]                        __i915_subtests+0xb8/0x210 [i915]
<4>[  673.483764]                        __run_selftests+0x112/0x170 [i915]
<4>[  673.483793]                        i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.483821]                        i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.483822]                        pci_device_probe+0x9e/0x120
<4>[  673.483824]                        really_probe+0xea/0x420
<4>[  673.483825]                        driver_probe_device+0x10b/0x120
<4>[  673.483826]                        device_driver_attach+0x4a/0x50
<4>[  673.483827]                        __driver_attach+0x97/0x130
<4>[  673.483828]                        bus_for_each_dev+0x74/0xc0
<4>[  673.483829]                        bus_add_driver+0x142/0x220
<4>[  673.483830]                        driver_register+0x56/0xf0
<4>[  673.483831]                        do_one_initcall+0x58/0x2ff
<4>[  673.483833]                        do_init_module+0x56/0x1f8
<4>[  673.483834]                        load_module+0x243e/0x29f0
<4>[  673.483835]                        __do_sys_finit_module+0xe9/0x110
<4>[  673.483836]                        do_syscall_64+0x4f/0x210
<4>[  673.483837]                        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.483838]    }
<4>[  673.483868]    ... key      at: [<ffffffffa0a8f132>] __key.70113+0x2/0xffffffffffef2ed0 [i915]
<4>[  673.483869]    ... acquired at:
<4>[  673.483935]    __execlists_reset+0xfb/0xc20 [i915]
<4>[  673.483965]    execlists_reset+0x3d/0x50 [i915]
<4>[  673.483995]    intel_engine_reset+0xdf/0x230 [i915]
<4>[  673.484022]    live_preempt_hang+0x1d7/0x2e0 [i915]
<4>[  673.484064]    __i915_subtests+0xb8/0x210 [i915]
<4>[  673.484130]    __run_selftests+0x112/0x170 [i915]
<4>[  673.484163]    i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.484193]    i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.484194]    pci_device_probe+0x9e/0x120
<4>[  673.484195]    really_probe+0xea/0x420
<4>[  673.484196]    driver_probe_device+0x10b/0x120
<4>[  673.484197]    device_driver_attach+0x4a/0x50
<4>[  673.484198]    __driver_attach+0x97/0x130
<4>[  673.484199]    bus_for_each_dev+0x74/0xc0
<4>[  673.484200]    bus_add_driver+0x142/0x220
<4>[  673.484202]    driver_register+0x56/0xf0
<4>[  673.484203]    do_one_initcall+0x58/0x2ff
<4>[  673.484204]    do_init_module+0x56/0x1f8
<4>[  673.484205]    load_module+0x243e/0x29f0
<4>[  673.484206]    __do_sys_finit_module+0xe9/0x110
<4>[  673.484207]    do_syscall_64+0x4f/0x210
<4>[  673.484208]    entry_SYSCALL_64_after_hwframe+0x49/0xbe

<4>[  673.484209]  -> (&engine->active.lock){..-.} ops: 972791 {
<4>[  673.484211]     IN-SOFTIRQ-W at:
<4>[  673.484213]                       lock_acquire+0xa7/0x1c0
<4>[  673.484214]                       _raw_spin_lock_irqsave+0x33/0x50
<4>[  673.484244]                       execlists_submission_tasklet+0xaf/0x100 [i915]
<4>[  673.484246]                       tasklet_action_common.isra.18+0x6c/0x1c0
<4>[  673.484247]                       __do_softirq+0xdf/0x47f
<4>[  673.484248]                       irq_exit+0xba/0xc0
<4>[  673.484249]                       do_IRQ+0x83/0x160
<4>[  673.484250]                       ret_from_intr+0x0/0x1d
<4>[  673.484252]                       cpuidle_enter_state+0xb2/0x450
<4>[  673.484253]                       cpuidle_enter+0x24/0x40
<4>[  673.484254]                       do_idle+0x1e7/0x250
<4>[  673.484256]                       cpu_startup_entry+0x14/0x20
<4>[  673.484257]                       start_secondary+0x15f/0x1b0
<4>[  673.484258]                       secondary_startup_64+0xa4/0xb0
<4>[  673.484259]     INITIAL USE at:
<4>[  673.484261]                      lock_acquire+0xa7/0x1c0
<4>[  673.484290]                      intel_engine_init_active+0x7e/0xb0 [i915]
<4>[  673.484305]                      intel_engines_setup+0x1cd/0x3b0 [i915]
<4>[  673.484305]                      i915_gem_init+0x12d/0x900 [i915]
<4>[  673.484305]                      i915_driver_probe+0xb70/0x15d0 [i915]
<4>[  673.484305]                      i915_pci_probe+0x43/0x1b0 [i915]
<4>[  673.484305]                      pci_device_probe+0x9e/0x120
<4>[  673.484305]                      really_probe+0xea/0x420
<4>[  673.484305]                      driver_probe_device+0x10b/0x120
<4>[  673.484305]                      device_driver_attach+0x4a/0x50
<4>[  673.484305]                      __driver_attach+0x97/0x130
<4>[  673.484305]                      bus_for_each_dev+0x74/0xc0
<4>[  673.484305]                      bus_add_driver+0x142/0x220
<4>[  673.484305]                      driver_register+0x56/0xf0
<4>[  673.484305]                      do_one_initcall+0x58/0x2ff
<4>[  673.484305]                      do_init_module+0x56/0x1f8
<4>[  673.484305]                      load_module+0x243e/0x29f0
<4>[  673.484305]                      __do_sys_finit_module+0xe9/0x110
<4>[  673.484305]                      do_syscall_64+0x4f/0x210
<4>[  673.484305]                      entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.484305]   }
<4>[  673.484305]   ... key      at: [<ffffffffa0a8f160>] __key.70307+0x0/0xffffffffffef2ea0 [i915]
<4>[  673.484305]   ... acquired at:
<4>[  673.484305]    _raw_spin_lock_irqsave+0x33/0x50
<4>[  673.484305]    execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  673.484305]    submit_notify+0xa8/0x13c [i915]
<4>[  673.484305]    __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[  673.484305]    i915_sw_fence_wake+0x51/0x70 [i915]
<4>[  673.484305]    __i915_sw_fence_complete+0x1ee/0x250 [i915]
<4>[  673.484305]    dma_i915_sw_fence_wake+0x1b/0x30 [i915]
<4>[  673.484305]    dma_fence_signal_locked+0x9e/0x1b0
<4>[  673.484305]    dma_fence_signal+0x1f/0x40
<4>[  673.484305]    fence_work+0x28/0x80 [i915]
<4>[  673.484305]    process_one_work+0x26a/0x620
<4>[  673.484305]    worker_thread+0x37/0x380
<4>[  673.484305]    kthread+0x119/0x130
<4>[  673.484305]    ret_from_fork+0x24/0x50

<4>[  673.484305] -> (&i915_request_get(rq)->submit/1){-...} ops: 857694 {
<4>[  673.484305]    IN-HARDIRQ-W at:
<4>[  673.484305]                     lock_acquire+0xa7/0x1c0
<4>[  673.484305]                     _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]                     __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]                     intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]                     cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]                     gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]                     gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]                     __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]                     handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]                     handle_irq_event+0x2f/0x50
<4>[  673.484305]                     handle_edge_irq+0x99/0x1b0
<4>[  673.484305]                     do_IRQ+0x7e/0x160
<4>[  673.484305]                     ret_from_intr+0x0/0x1d
<4>[  673.484305]                     cpuidle_enter_state+0xb2/0x450
<4>[  673.484305]                     cpuidle_enter+0x24/0x40
<4>[  673.484305]                     do_idle+0x1e7/0x250
<4>[  673.484305]                     cpu_startup_entry+0x14/0x20
<4>[  673.484305]                     start_secondary+0x15f/0x1b0
<4>[  673.484305]                     secondary_startup_64+0xa4/0xb0
<4>[  673.484305]    INITIAL USE at:
<4>[  673.484305]                    lock_acquire+0xa7/0x1c0
<4>[  673.484305]                    _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]                    __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]                    __engine_park+0x233/0x420 [i915]
<4>[  673.484305]                    ____intel_wakeref_put_last+0x1c/0x70 [i915]
<4>[  673.484305]                    intel_gt_resume+0x202/0x2c0 [i915]
<4>[  673.484305]                    i915_gem_init+0x36e/0x900 [i915]
<4>[  673.484305]                    i915_driver_probe+0xb70/0x15d0 [i915]
<4>[  673.484305]                    i915_pci_probe+0x43/0x1b0 [i915]
<4>[  673.484305]                    pci_device_probe+0x9e/0x120
<4>[  673.484305]                    really_probe+0xea/0x420
<4>[  673.484305]                    driver_probe_device+0x10b/0x120
<4>[  673.484305]                    device_driver_attach+0x4a/0x50
<4>[  673.484305]                    __driver_attach+0x97/0x130
<4>[  673.484305]                    bus_for_each_dev+0x74/0xc0
<4>[  673.484305]                    bus_add_driver+0x142/0x220
<4>[  673.484305]                    driver_register+0x56/0xf0
<4>[  673.484305]                    do_one_initcall+0x58/0x2ff
<4>[  673.484305]                    do_init_module+0x56/0x1f8
<4>[  673.484305]                    load_module+0x243e/0x29f0
<4>[  673.484305]                    __do_sys_finit_module+0xe9/0x110
<4>[  673.484305]                    do_syscall_64+0x4f/0x210
<4>[  673.484305]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.484305]  }
<4>[  673.484305]  ... key      at: [<ffffffffa0a8f6a1>] __key.80173+0x1/0xffffffffffef2960 [i915]
<4>[  673.484305]  ... acquired at:
<4>[  673.484305]    mark_lock+0x382/0x500
<4>[  673.484305]    __lock_acquire+0x7e1/0x15d0
<4>[  673.484305]    lock_acquire+0xa7/0x1c0
<4>[  673.484305]    _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]    __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]    intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]    cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]    gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]    gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]    __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]    handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]    handle_irq_event+0x2f/0x50
<4>[  673.484305]    handle_edge_irq+0x99/0x1b0
<4>[  673.484305]    do_IRQ+0x7e/0x160
<4>[  673.484305]    ret_from_intr+0x0/0x1d
<4>[  673.484305]    cpuidle_enter_state+0xb2/0x450
<4>[  673.484305]    cpuidle_enter+0x24/0x40
<4>[  673.484305]    do_idle+0x1e7/0x250
<4>[  673.484305]    cpu_startup_entry+0x14/0x20
<4>[  673.484305]    start_secondary+0x15f/0x1b0
<4>[  673.484305]    secondary_startup_64+0xa4/0xb0

<4>[  673.484305]
                  stack backtrace:
<4>[  673.484305] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.4.0-rc1-CI-Trybot_5118+ #1
<4>[  673.484305] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4>[  673.484305] Call Trace:
<4>[  673.484305]  <IRQ>
<4>[  673.484305]  dump_stack+0x67/0x9b
<4>[  673.484305]  check_usage_forwards+0x13c/0x150
<4>[  673.484305]  ? mark_lock+0x382/0x500
<4>[  673.484305]  mark_lock+0x382/0x500
<4>[  673.484305]  ? check_usage_backwards+0x140/0x140
<4>[  673.484305]  __lock_acquire+0x7e1/0x15d0
<4>[  673.484305]  ? debug_object_deactivate+0x17e/0x190
<4>[  673.484305]  lock_acquire+0xa7/0x1c0
<4>[  673.484305]  ? __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]  ? __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]  cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]  gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]  gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]  __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]  handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]  handle_irq_event+0x2f/0x50
<4>[  673.484305]  handle_edge_irq+0x99/0x1b0
<4>[  673.484305]  do_IRQ+0x7e/0x160
<4>[  673.484305]  common_interrupt+0xf/0xf
<4>[  673.484305]  </IRQ>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004203121.31138-1-chris@chris-wilson.co.uk

1664f35a

drm/i915/execlists: Fix annotation for decoupling virtual request · 08ad9a38

由 Chris Wilson 提交于 10月 04, 2019

As we may signal a request and take the engine->active.lock within the
signaler, the engine submission paths have to use a nested annotation on
their requests -- but we guarantee that we can never submit on the same
engine as the signaling fence.

<4>[  723.763281] WARNING: possible circular locking dependency detected
<4>[  723.763285] 5.3.0-g80fa0e042cdb-drmtip_379+ #1 Tainted: G     U
<4>[  723.763288] ------------------------------------------------------
<4>[  723.763291] gem_exec_await/1388 is trying to acquire lock:
<4>[  723.763294] ffff93a7b53221d8 (&engine->active.lock){..-.}, at: execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  723.763378]
                  but task is already holding lock:
<4>[  723.763381] ffff93a7c25f6d20 (&i915_request_get(rq)->submit/1){-.-.}, at: __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  723.763420]
                  which lock already depends on the new lock.

<4>[  723.763423]
                  the existing dependency chain (in reverse order) is:
<4>[  723.763427]
                  -> #2 (&i915_request_get(rq)->submit/1){-.-.}:
<4>[  723.763434]        _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  723.763478]        __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  723.763513]        intel_engine_breadcrumbs_irq+0x3aa/0x5e0 [i915]
<4>[  723.763600]        cs_irq_handler+0x49/0x50 [i915]
<4>[  723.763659]        gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  723.763690]        gen11_irq_handler+0x54/0xf0 [i915]
<4>[  723.763695]        __handle_irq_event_percpu+0x41/0x2d0
<4>[  723.763699]        handle_irq_event_percpu+0x2b/0x70
<4>[  723.763702]        handle_irq_event+0x2f/0x50
<4>[  723.763706]        handle_edge_irq+0xee/0x1a0
<4>[  723.763709]        do_IRQ+0x7e/0x160
<4>[  723.763712]        ret_from_intr+0x0/0x1d
<4>[  723.763717]        __slab_alloc.isra.28.constprop.33+0x4f/0x70
<4>[  723.763720]        kmem_cache_alloc+0x28d/0x2f0
<4>[  723.763724]        vm_area_dup+0x15/0x40
<4>[  723.763727]        dup_mm+0x2dd/0x550
<4>[  723.763730]        copy_process+0xf21/0x1ef0
<4>[  723.763734]        _do_fork+0x71/0x670
<4>[  723.763737]        __se_sys_clone+0x6e/0xa0
<4>[  723.763741]        do_syscall_64+0x4f/0x210
<4>[  723.763744]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  723.763747]
                  -> #1 (&(&rq->lock)->rlock#2){-.-.}:
<4>[  723.763752]        _raw_spin_lock+0x2a/0x40
<4>[  723.763789]        __unwind_incomplete_requests+0x3eb/0x450 [i915]
<4>[  723.763825]        __execlists_submission_tasklet+0x9ec/0x1d60 [i915]
<4>[  723.763864]        execlists_submission_tasklet+0x34/0x50 [i915]
<4>[  723.763874]        tasklet_action_common.isra.5+0x47/0xb0
<4>[  723.763878]        __do_softirq+0xd8/0x4ae
<4>[  723.763881]        irq_exit+0xa9/0xc0
<4>[  723.763883]        smp_apic_timer_interrupt+0xb7/0x280
<4>[  723.763887]        apic_timer_interrupt+0xf/0x20
<4>[  723.763892]        cpuidle_enter_state+0xae/0x450
<4>[  723.763895]        cpuidle_enter+0x24/0x40
<4>[  723.763899]        do_idle+0x1e7/0x250
<4>[  723.763902]        cpu_startup_entry+0x14/0x20
<4>[  723.763905]        start_secondary+0x15f/0x1b0
<4>[  723.763908]        secondary_startup_64+0xa4/0xb0
<4>[  723.763911]
                  -> #0 (&engine->active.lock){..-.}:
<4>[  723.763916]        __lock_acquire+0x15d8/0x1ea0
<4>[  723.763919]        lock_acquire+0xa6/0x1c0
<4>[  723.763922]        _raw_spin_lock_irqsave+0x33/0x50
<4>[  723.763956]        execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  723.764002]        submit_notify+0xa8/0x13c [i915]
<4>[  723.764035]        __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[  723.764054]        i915_sw_fence_wake+0x51/0x64 [i915]
<4>[  723.764054]        __i915_sw_fence_complete+0x1ee/0x250 [i915]
<4>[  723.764054]        dma_i915_sw_fence_wake_timer+0x14/0x20 [i915]
<4>[  723.764054]        dma_fence_signal_locked+0x9e/0x1c0
<4>[  723.764054]        dma_fence_signal+0x1f/0x40
<4>[  723.764054]        vgem_fence_signal_ioctl+0x67/0xc0 [vgem]
<4>[  723.764054]        drm_ioctl_kernel+0x83/0xf0
<4>[  723.764054]        drm_ioctl+0x2f3/0x3b0
<4>[  723.764054]        do_vfs_ioctl+0xa0/0x6f0
<4>[  723.764054]        ksys_ioctl+0x35/0x60
<4>[  723.764054]        __x64_sys_ioctl+0x11/0x20
<4>[  723.764054]        do_syscall_64+0x4f/0x210
<4>[  723.764054]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  723.764054]
                  other info that might help us debug this:

<4>[  723.764054] Chain exists of:
                    &engine->active.lock --> &(&rq->lock)->rlock#2 --> &i915_request_get(rq)->submit/1

<4>[  723.764054]  Possible unsafe locking scenario:

<4>[  723.764054]        CPU0                    CPU1
<4>[  723.764054]        ----                    ----
<4>[  723.764054]   lock(&i915_request_get(rq)->submit/1);
<4>[  723.764054]                                lock(&(&rq->lock)->rlock#2);
<4>[  723.764054]                                lock(&i915_request_get(rq)->submit/1);
<4>[  723.764054]   lock(&engine->active.lock);
<4>[  723.764054]
                   *** DEADLOCK ***

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111862Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004194758.19679-1-chris@chris-wilson.co.uk

08ad9a38

drm/i915/gt: Prefer local path to runtime powermanagement · cd6a8513

由 Chris Wilson 提交于 10月 07, 2019

Avoid going to the base i915 device when we already have a path from gt
to the runtime powermanagement interface. The benefit is that it looks a
bit more self-consistent to always be acquiring the gt->uncore->rpm for
use with the gt->uncore.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154531.1750-1-chris@chris-wilson.co.uk

cd6a8513

drm/i915: make array hw_engine_mask static, makes object smaller · b9dcb97b

由 Colin Ian King 提交于 10月 07, 2019

Don't populate the array hw_engine_mask on the stack but instead make it
static. Makes the object code smaller by 316 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  34004	   4388	    320	  38712	   9738	gpu/drm/i915/gt/intel_reset.o

After:
   text	   data	    bss	    dec	    hex	filename
  33528	   4548	    320	  38396	   95fc	gpu/drm/i915/gt/intel_reset.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154151.23245-1-colin.king@canonical.com

b9dcb97b

drm/i915/vbt: Child device size remains unchanged through VBT 229 · 3aec2c6a

由 Matt Roper 提交于 10月 02, 2019

The latest documented version of the VBT is 229, but no further data has
been added to the child device definition in block 2.  Update the child
device version test to eliminate the "Expected child device config size
for VBT version XXX not known; assuming 39" debug messages from the
logs.

Bspec: 20124
Bspec: 20157
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002192258.1013-1-matthew.d.roper@intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

3aec2c6a

07 10月, 2019 3 次提交

drm/i915/perf: move perf types to their own header · 1d0f2ebf

由 Lionel Landwerlin 提交于 9月 09, 2019

Following a pattern used throughout the driver.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NUmesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909093116.7747-7-lionel.g.landwerlin@intel.com

1d0f2ebf

drm/i915/gt: Restore dropped 'interruptible' flag · abc47ff6

由 Chris Wilson 提交于 10月 06, 2019

Lost in the rebasing was Tvrtko's reminder that we need to keep an
uninterruptible wait around for the Ironlake VT-d w/a
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006165002.30312-3-chris@chris-wilson.co.uk

abc47ff6

J
drm/i915: Update DRIVER_DATE to 20191007 · 9445ad17
由 Joonas Lahtinen 提交于 10月 07, 2019
```
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
```
9445ad17

06 10月, 2019 3 次提交

drm/i915: move gmbus setup down to intel_modeset_init() · 9bfcf194

由 Jani Nikula 提交于 10月 04, 2019

Pair the gmbus setup and teardown in the same layer. This also fixes the
double gmbus teardown on the i915_driver_modeset_probe() error path.

Move the gmbus setup a bit later in the sequence to make the follow-up
refactoring easier, and to pinpoint any unexpected consequences of this
change right here, instead of the later refactoring.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-3-jani.nikula@intel.com

9bfcf194

drm/i915: split out i915_switcheroo.[ch] from i915_drv.c · 63bf8301

由 Jani Nikula 提交于 10月 04, 2019

Split out code related to vga switcheroo register/unregister and state
handling from i915_drv.c into new i915_switcheroo.[ch] files.

It's a bit difficult to draw the line how much to move to the new file
from i915_drv.c, but it seemed to me keeping i915_suspend_switcheroo()
and i915_resume_switcheroo() in place was the cleanest.

No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-2-jani.nikula@intel.com

63bf8301

drm/i915/vga: rename intel_vga_msr_write() to intel_vga_reset_io_mem() · 7fd29602

由 Jani Nikula 提交于 10月 04, 2019

Rename the function per Ville's suggestion. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-1-jani.nikula@intel.com

7fd29602

05 10月, 2019 1 次提交

drm/i915/stolen: make the object creation interface consistent · 0e5493ca

由 CQ Tang 提交于 10月 04, 2019

Our other backends return an actual error value upon failure. Do the
same for stolen objects, which currently just return NULL on failure.
Signed-off-by: NCQ Tang <cq.tang@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004170452.15410-2-matthew.auld@intel.com

0e5493ca

04 10月, 2019 23 次提交

drm/i915: Implement a better i945gm vblank irq vs. C-states workaround · 7d423af9

由 Ville Syrjälä 提交于 10月 03, 2019

The current "disable C3+" workaround for the delayed vblank
irqs on i945gm no longer works. I'm not sure what changed, but
now I need to also disable C2. I also got my hands on a i915gm
machine that suffers from the same issue.

After some furious poking of registers I managed to find a
better workaround: The "Do not Turn off Core Render Clock in C
states" bit. With that I no longer have to disable any C-states,
and as a nice bonus the power cost is only ~1/4 of the
"disable C3+" method (which mind you doesn't even work anymore,
and so would have an even higher power cost if we made it work
by also disabling C2).

So let's throw out all the cpuidle/qos crap and just toggle
the magic bit as needed. And we extend the workaround to cover
i915gm as well.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003140231.24408-1-ville.syrjala@linux.intel.comAcked-by: NChris Wilson <chris@chris-wilson.co.uk>

7d423af9

drm/i915: Drop struct_mutex from around GEM initialisation · 78427933

由 Chris Wilson 提交于 10月 04, 2019

We no longer need to placate lockdep by holding struct_mutex for our
initialisation, so don't.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-21-chris@chris-wilson.co.uk

78427933

drm/i915/selftests: Drop vestigal struct_mutex guards · 2af40298

由 Chris Wilson 提交于 10月 04, 2019

We no longer need struct_mutex to serialise request emission, so remove
it from the gt selftests.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-20-chris@chris-wilson.co.uk

2af40298

drm/i915: Drop struct_mutex from suspend state save/restore · 3d88f76d

由 Chris Wilson 提交于 10月 04, 2019

struct_mutex provides no serialisation of the registers and data
structures being saved and restored across suspend/resume. It is
completely superfluous here.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-19-chris@chris-wilson.co.uk

3d88f76d

drm/i915: Remove struct_mutex guard for debugfs/opregion · 6c3828ab

由 Chris Wilson 提交于 10月 04, 2019

Having a struct_mutex around the read of a BIOS blob serves no purpose.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-18-chris@chris-wilson.co.uk

6c3828ab

drm/i915: Drop struct_mutex guard from debugfs/framebuffer_info · ba198a10

由 Chris Wilson 提交于 10月 04, 2019

It protects nothing being accessed for the intel_framebuffer, so it's
own locking had better be sufficient.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-17-chris@chris-wilson.co.uk

ba198a10

drm/i915/overlay: Drop struct_mutex guard · cb5eb072

由 Chris Wilson 提交于 10月 04, 2019

The overlay uses the modeset mutex to control itself and only required
the struct_mutex for requests, which is now obsolete.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-16-chris@chris-wilson.co.uk

cb5eb072

drm/i915: Move context management under GEM · a4e7ccda

由 Chris Wilson 提交于 10月 04, 2019

Keep track of the GEM contexts underneath i915->gem.contexts and assign
them their own lock for the purposes of list management.

v2: Focus on lock tracking; ctx->vm is protected by ctx->mutex
v3: Correct split with removal of logical HW ID
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-15-chris@chris-wilson.co.uk

a4e7ccda

drm/i915: Remove logical HW ID · 2935ed53

由 Chris Wilson 提交于 10月 04, 2019

With the introduction of ctx->engines[] we allow multiple logical
contexts to be used on the same engine (e.g. with virtual engines).
According to bspec, aach logical context requires a unique tag in order
for context-switching to occur correctly between them. [Simple
experiments show that it is not so easy to trick the HW into performing
a lite-restore with matching logical IDs, though my memory from early
Broadwell experiments do suggest that it should be generating
lite-restores.]

We only need to keep a unique tag for the active lifetime of the
context, and for as long as we need to identify that context. The HW
uses the tag to determine if it should use a lite-restore (why not the
LRCA?) and passes the tag back for various status identifies. The only
status we need to track is for OA, so when using perf, we assign the
specific context a unique tag.

v2: Calculate required number of tags to fill ELSP.

Fixes: 976b55f0 ("drm/i915: Allow a context to define its set of engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111895Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-14-chris@chris-wilson.co.uk

2935ed53

drm/i915: Move global activity tracking from GEM to GT · a2b4dead

由 Chris Wilson 提交于 10月 04, 2019

As our global unpark/park keep track of the number of active users, we
can simply move the accounting from the GEM layer to the base GT layer.
It was placed originally inside GEM to benefit from the 100ms extra
delay on idleness, but that has been eliminated and now there is no
substantive difference between the layers. In moving it, we move another
piece of the puzzle out from underneath struct_mutex.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-13-chris@chris-wilson.co.uk

a2b4dead

drm/i915: Move request runtime management onto gt · 66101975

由 Chris Wilson 提交于 10月 04, 2019

Requests are run from the gt and are tided into the gt runtime power
management, so pull the runtime request management under gt/
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-12-chris@chris-wilson.co.uk

66101975

drm/i915/gem: Retire directly for mmap-offset shrinking · 789ed955

由 Chris Wilson 提交于 10月 04, 2019

Now that we can retire without taking struct_mutex, we can do so to
handle shrinking the mmap-offset space after an allocation failure.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-11-chris@chris-wilson.co.uk

789ed955

drm/i915: Merge wait_for_timelines with retire_request · f33a8a51

由 Chris Wilson 提交于 10月 04, 2019

wait_for_timelines is essentially the same loop as retiring requests
(with an extra timeout), so merge the two into one routine.

v2: i915_retire_requests_timeout and keep VT'd w/a as !interruptible
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-10-chris@chris-wilson.co.uk

f33a8a51

drm/i915: Remove the GEM idle worker · 33d85644

由 Chris Wilson 提交于 10月 04, 2019

Nothing inside the idle worker now requires struct_mutex, so we can
remove the indirection of using our own worker.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-9-chris@chris-wilson.co.uk

33d85644

drm/i915: Drop struct_mutex from around i915_retire_requests() · 7e805762

由 Chris Wilson 提交于 10月 04, 2019

We don't need to hold struct_mutex now for retiring requests, so drop it
from i915_retire_requests() and i915_gem_wait_for_idle(), finally
removing I915_WAIT_LOCKED for good.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-8-chris@chris-wilson.co.uk

7e805762

drm/i915: Move idle barrier cleanup into engine-pm · b7234840

由 Chris Wilson 提交于 10月 04, 2019

Now that we now longer need to guarantee that the active callback is
under the struct_mutex, we can lift it out of the i915_gem_park() and
into the engine parking itself.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-7-chris@chris-wilson.co.uk

b7234840

drm/i915: Coordinate i915_active with its own mutex · b1e3177b

由 Chris Wilson 提交于 10月 04, 2019

Forgo the struct_mutex serialisation for i915_active, and interpose its
own mutex handling for active/retire.

This is a multi-layered sleight-of-hand. First, we had to ensure that no
active/retire callbacks accidentally inverted the mutex ordering rules,
nor assumed that they were themselves serialised by struct_mutex. More
challenging though, is the rule over updating elements of the active
rbtree. Instead of the whole i915_active now being serialised by
struct_mutex, allocations/rotations of the tree are serialised by the
i915_active.mutex and individual nodes are serialised by the caller
using the i915_timeline.mutex (we need to use nested spinlocks to
interact with the dma_fence callback lists).

The pain point here is that instead of a single mutex around execbuf, we
now have to take a mutex for active tracker (one for each vma, context,
etc) and a couple of spinlocks for each fence update. The improvement in
fine grained locking allowing for multiple concurrent clients
(eventually!) should be worth it in typical loads.

v2: Add some comments that barely elucidate anything :(
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-6-chris@chris-wilson.co.uk

b1e3177b

drm/i915: Push the i915_active.retire into a worker · 274cbf20

由 Chris Wilson 提交于 10月 04, 2019

As we need to use a mutex to serialise i915_active activation
(because we want to allow the callback to sleep), we need to push the
i915_active.retire into a worker callback in case we get need to retire
from an atomic context.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-5-chris@chris-wilson.co.uk

274cbf20

drm/i915: Pull i915_vma_pin under the vm->mutex · 2850748e

由 Chris Wilson 提交于 10月 04, 2019

Replace the struct_mutex requirement for pinning the i915_vma with the
local vm->mutex instead. Note that the vm->mutex is tainted by the
shrinker (we require unbinding from inside fs-reclaim) and so we cannot
allocate while holding that mutex. Instead we have to preallocate
workers to do allocate and apply the PTE updates after we have we
reserved their slot in the drm_mm (using fences to order the PTE writes
with the GPU work and with later unbind).

In adding the asynchronous vma binding, one subtle requirement is to
avoid coupling the binding fence into the backing object->resv. That is
the asynchronous binding only applies to the vma timeline itself and not
to the pages as that is a more global timeline (the binding of one vma
does not need to be ordered with another vma, nor does the implicit GEM
fencing depend on a vma, only on writes to the backing store). Keeping
the vma binding distinct from the backing store timelines is verified by
a number of async gem_exec_fence and gem_exec_schedule tests. The way we
do this is quite simple, we keep the fence for the vma binding separate
and only wait on it as required, and never add it to the obj->resv
itself.

Another consequence in reducing the locking around the vma is the
destruction of the vma is no longer globally serialised by struct_mutex.
A natural solution would be to add a kref to i915_vma, but that requires
decoupling the reference cycles, possibly by introducing a new
i915_mm_pages object that is own by both obj->mm and vma->pages.
However, we have not taken that route due to the overshadowing lmem/ttm
discussions, and instead play a series of complicated games with
trylocks to (hopefully) ensure that only one destruction path is called!

v2: Add some commentary, and some helpers to reduce patch churn.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-4-chris@chris-wilson.co.uk

2850748e

drm/i915: Mark up address spaces that may need to allocate · 11331125

由 Chris Wilson 提交于 10月 04, 2019

Since we cannot allocate underneath the vm->mutex (it is used in the
direct-reclaim paths), we need to shift the allocations off into a
mutexless worker with fence recursion prevention. To know when we need
this protection, we mark up the address spaces that do allocate before
insertion. In the future, we may wish to extend the async bind scheme to
more than just allocations.

v2: s/vm->bind_alloc/vm->bind_async_flags/
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-3-chris@chris-wilson.co.uk

11331125