Make the dvb core network support aware of the media controller and
register the corresponding devices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make the dvb core CA support aware of the media controller and
register the corresponding devices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make the dvb core demux support aware of the media controller and
register the corresponding devices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that the dvb core is capable of registering devices via the
media controller, add support for the DVB frontend devices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Let's add media controller support for this driver and register it
for both V4L and DVB.

The media controller on this driver is not mandatory, as it can fully
work without it. So, if the media controller register fails, just print
an error message, but proceed with device registering.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Provide a way to register media controller device nodes
at the DVB core.

Please notice that the dvbdev callers also require changes
for the devices to be registered via the media controller.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that we've added MEDIA_ENT_T_V4L2_SUBDEV_TUNER at the API,
document it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add MEDIA_ENT_T_V4L2_SUBDEV_TUNER to represent the V4L2
(and dvb) tuner subdevices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVB API is actually several different APIs bundled together, each
using its own device node.

Fix the media controller DVB API to actually reflect what's there at the
DVB subsystem.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Most of the DVB subdevs have already their own devnode.

Add support for them at the media controller API.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The media-ctl userspace application assumes that all device nodes
are uniquelly defined via major,minor, just like v4l and fb.

That's ok for those types of devices, but, as we're adding support
for DVB at the API, what's written there at the DocBook is wrong.

So, fix it.

While here, fix the size of the reserved space inside the union,
with is 184, and not 180.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The previous provision for DVB media controller support were to
define an ID (likely meaning the adapter number) for the DVB
devnodes.

This is just plain wrong. Just like V4L, DVB devices (and any other
device node)) are uniquely identified via a (major, minor) tuple.

This is enough to uniquely identify a devnode, no matter what
API it implements.

So, before we go too far, let's mark the old v4l, fb, dvb and alsa
"devnode" info as deprecated, and just call it as "dev".

We can latter add fields specific to each API if needed.

As we don't want to break compilation on already existing apps,
let's just keep the old definitions as-is, adding a note that
those are deprecated at media-entity.h.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Commit 9439eb3a ("asm-generic: io: implement relaxed
accessor macros as conditional wrappers") has added
{read,write}{b,w,l,q}_relaxed to include/asm-generic/io.h
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by Peter Kovar, there's a potential risk of a division by
zero on calls to jpeg_set_qual() when quality is zero.

As quality can't be 0 or lower than that, add an extra clause to cover
this special case.
Signed-off-by: NLuis de Bethencourt <luis.bg@samsung.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the generic facility instead of a home-grown one.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Convert dprintk to netdev_dbg where appropriate.
Remove dvb_net_debug module_param.
Remove __func__ from output as that can be added by dynamic_debug.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

No need for more macros, so remove them and use the kernel extension.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Adjusts boolean assignments from 0/1 to false/true.

And accordingly, it also adjusts the if conditions.
Signed-off-by: NHeba Aamer <heba93aamer@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of implement its own logic, use the already-defined one.
Signed-off-by: NMartin Kepplinger <martink@posteo.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch is based on Antti's silabs branch.

Add support for 1.7 MHz bandwidth. Supported in all versions of Si2168 according to short data sheets.

[mchehab@osg.samsung.com: Fix CodingStyle]
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch should is based on Antti's silabs branch.

According to dvb-frontend.h set_frontend may be called with bandwidth_hz set to 0 if automatic bandwidth is required. Si2168 does not support automatic bandwidth and does not declare FE_CAN_BANDWIDTH_AUTO in caps.

This patch will change the behaviour in a way that EINVAL is returned if bandwidth_hz is 0.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We have to check pointer for NULL and then dereference it.
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: NBenjamin Larsson <benjamin@southpole.se>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

symbol-rate report was wrongly removed off by the commit:906aaf5a .
Signed-off-by: NAkihiro Tsukada <tskd08@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This allows calling the original functions providing the streaming is off.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Create dm04_read_status to check lock through either interrupt values
or directly by the call back.

When the device is not streaming the frontends original call back is
used. When streaming has started it turns off I2C messaging by
setting st->i2c_talk_onoff to zero. I2C can only be turn on again
by one of the other allowed frontend calls.

All old code is removed from lme2510_msg and this function only needs
to set st->i2c_talk_onoff to 1.

The lock status is saved and when the frondend is locked is maintained
by lme2510_int_response who will now just kill the lock.

The call back for rs2000 tuner is nologer required.

All frontend types have been tested.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Create call backs dm04_read_signal_strength, dm04_read_snr and
move dm04_read_ber and dm04_read_ucblocks for all frontends

Removing the I2C filtering from lme2510_msg and the old rs2000 callbacks.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK
but the endpoint otheriwse functions as interrupt.

Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Ocassionally the device fails to report back an interrupt urb status which
results in false no lock trigger on the RS2000 demodulator.

Increase time from 60 msecs to 200 msecs.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

X-Patchwork-Delegate: m.chehab@samsung.com
Fix the following smatch warning:
	drivers/media/pci/cx88//cx88-dvb.c:1508 dvb_register() warn: if statement not indented
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As complained by smatch:
	drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1159 rtl2832u_tuner_attach() info: 'pdata' is not actually initialized (unreached code).

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/rtl2832.c:157:5: warning: no previous prototype for ‘rtl2832_bulk_write’ [-Wmissing-prototypes]
 int rtl2832_bulk_write(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2832.c:169:5: warning: no previous prototype for ‘rtl2832_update_bits’ [-Wmissing-prototypes]
 int rtl2832_update_bits(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2832.c:181:5: warning: no previous prototype for ‘rtl2832_bulk_read’ [-Wmissing-prototypes]
 int rtl2832_bulk_read(struct i2c_client *client, unsigned int reg, void *val,

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/rtl2830.c:21:5: warning: no previous prototype for ‘rtl2830_bulk_write’ [-Wmissing-prototypes]
 int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2830.c:33:5: warning: no previous prototype for ‘rtl2830_update_bits’ [-Wmissing-prototypes]
 int rtl2830_update_bits(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2830.c:45:5: warning: no previous prototype for ‘rtl2830_bulk_read’ [-Wmissing-prototypes]
 int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg, void *val,
     ^

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add kernel-doc comments for platform_data configuration structure.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add kernel-doc comments for platform_data configuration structure.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add kernel-doc comments for platform_data configuration structure.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Introduce own lock to silence lockdep warning. lockdep validator
makes wrong decision when two similar (&map->mutex) locks were taken
recursively, even those are different mutexes in a two different
drivers. After that patch, functionality remains same, but mutex names
are different. That is a temporary hack, proper solution is make
regmap aware of locked nested locking rules.

=============================================
[ INFO: possible recursive locking detected ]
3.18.0-rc4+ #4 Tainted: G           O
---------------------------------------------
kdvb-ad-0-fe-0/2814 is trying to acquire lock:
 (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

but task is already holding lock:
 (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

other info that might help us debug this:
 Possible unsafe locking scenario:
       CPU0
       ----
  lock(&map->mutex);
  lock(&map->mutex);

 *** DEADLOCK ***
 May be due to missing lock nesting notation
1 lock held by kdvb-ad-0-fe-0/2814:
 #0:  (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

stack backtrace:
CPU: 3 PID: 2814 Comm: kdvb-ad-0-fe-0 Tainted: G           O 3.18.0-rc4+ #4
Hardware name: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2001    09/11/2014
 0000000000000000 00000000410c8772 ffff880293af3868 ffffffff817a6f82
 0000000000000000 ffff8800b3462be0 ffff880293af3968 ffffffff810e7f94
 ffff880293af3888 00000000410c8772 ffffffff82dfee60 ffffffff81ab8f89
Call Trace:
 [<ffffffff817a6f82>] dump_stack+0x4e/0x68
 [<ffffffff810e7f94>] __lock_acquire+0x1ea4/0x1f50
 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff817b01f3>] ? _raw_spin_lock_irqsave+0x83/0xa0
 [<ffffffff810e13e6>] ? up+0x16/0x50
 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff817af8bf>] ? _raw_spin_unlock_irqrestore+0x5f/0x70
 [<ffffffff810e9069>] lock_acquire+0xc9/0x170
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff817ab50e>] mutex_lock_nested+0x7e/0x430
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff817a530b>] ? printk+0x70/0x86
 [<ffffffff8110d9e8>] ? mod_timer+0x168/0x240
 [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40
 [<ffffffff814f08d9>] regmap_update_bits+0x29/0x60
 [<ffffffffa03e9778>] rtl2832_select+0x38/0x70 [rtl2832]
 [<ffffffffa039b03d>] i2c_mux_master_xfer+0x3d/0x90 [i2c_mux]
 [<ffffffff815da493>] __i2c_transfer+0x73/0x2e0
 [<ffffffff815dbaba>] i2c_transfer+0x5a/0xc0
 [<ffffffff815dbb6e>] i2c_master_send+0x4e/0x70
 [<ffffffffa03ff25a>] regmap_i2c_write+0x1a/0x50 [regmap_i2c]
 [<ffffffff817ab713>] ? mutex_lock_nested+0x283/0x430
 [<ffffffff814f06b2>] _regmap_raw_write+0x862/0x880
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff814f0744>] _regmap_bus_raw_write+0x74/0xa0
 [<ffffffff814ef3d2>] _regmap_write+0x92/0x140
 [<ffffffff814f0b7b>] regmap_write+0x4b/0x70
 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core]
 [<ffffffffa05141d4>] e4000_init+0x34/0x210 [e4000]
 [<ffffffffa032a029>] dvb_frontend_init+0x59/0xc0 [dvb_core]
 [<ffffffff810bde30>] ? finish_task_switch+0x80/0x180
 [<ffffffff810bddf2>] ? finish_task_switch+0x42/0x180
 [<ffffffffa032b116>] dvb_frontend_thread+0x86/0x7b0 [dvb_core]
 [<ffffffff817a9203>] ? __schedule+0x343/0x930
 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core]
 [<ffffffff810b826b>] kthread+0x10b/0x130
 [<ffffffff81020099>] ? sched_clock+0x9/0x10
 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250
 [<ffffffff817b063c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use rtl28xxu_ prefix for all register access routine names.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As all the callbacks are already same we could merge device
properties struct too and save space.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Merge all chip type specific prefixed (rtl2831u_ and rtl2832u_)
callback to top level callback prefixed as rtl28xxu_.

rtl2831u_foo() => rtl28xxu_foo()
rtl2832u_foo() => rtl28xxu_foo()
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>