Make checkstack work for UML.  We need to pass the underlying architecture
name, rather than "um" to checkstack.pl.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Acked-by: NMatt Mackall <mpm@selenic.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

BB noticed that we had the wrong bus error handler.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make __bb_init_func weak in order to avoid a link failure with some libcs
and/or gccs.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The UML/x86_64 headers were missing ptrace support for some segment registers.
 The underlying problem was that the x86_64 kernel uses user_regs_struct
rather than the ptrace register definitions in ptrace.  This patch switches
UML/x86_64 to using user_regs_struct for its definitions of the host's
registers.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ZONE_DMA might become dependent on CONFIG_ZONE_DMA, which UML doesn't define
(we're still arguing about this) So, let's change ZONE_DMA to ZONE_NORMAL.

This is prompted by optional-zone_dma-in-the-vm.patch, but should be harmless
on its own.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make lots of structures const in order to make it obvious that they need no
locking.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This spinlock can be taken on interrupt too, so spin_lock_irq[save] must be
used.

However, Documentation/networking/netdevices.txt explains we are called with
rtnl_lock() held - so we don't need to care about other concurrent opens.
Verified also in LDD3 and by direct checking.  Also verified that the network
layer (through a state machine) guarantees us that nobody will close the
interface while it's being used.  Please correct me if I'm wrong.

Also, we must check we don't sleep with irqs disabled!!!  But anyway, this is
not news - we already can't sleep while holding a spinlock.  Who says this is
guaranted really by the present code?
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We have never used this flag and recently one user experienced a complaining
warning about this (there was a symbol in the positive half of the address space
IIRC). So fix it.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix to remove annoying gcc-4.1 warnings "value computed not used" for m32r;
Modify set_mb to cast to void for SMP.
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the fallback arch_vma_name() to a sensible place (kernel/signal.c).

Currently it's in fs/proc/task_mmu.c, a file that is dependent on both
CONFIG_PROC_FS and CONFIG_MMU being enabled, but it's used from
kernel/signal.c from where it is called unconditionally.

[akpm@osdl.org: build fix]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make futexes work under NOMMU conditions.

This can be tested by running this in one shell:

	#define SYSERROR(X, Y) \
		do { if ((long)(X) == -1L) { perror(Y); exit(1); }} while(0)

	int main()
	{
		int shmid, tmp, *f, n;

		shmid = shmget(23, 4, IPC_CREAT|0666);
		SYSERROR(shmid, "shmget");

		f = shmat(shmid, NULL, 0);
		SYSERROR(f, "shmat");

		n = *f;
		printf("WAIT: %p{%x}\n", f, n);
		tmp = futex(f, FUTEX_WAIT, n, NULL, NULL, 0);
		SYSERROR(tmp, "futex");
		printf("WAITED: %d\n", tmp);

		tmp = shmdt(f);
		SYSERROR(tmp, "shmdt");

		exit(0);
	}

And then this in the other shell:

	#define SYSERROR(X, Y) \
		do { if ((long)(X) == -1L) { perror(Y); exit(1); }} while(0)

	int main()
	{
		int shmid, tmp, *f;

		shmid = shmget(23, 4, IPC_CREAT|0666);
		SYSERROR(shmid, "shmget");

		f = shmat(shmid, NULL, 0);
		SYSERROR(f, "shmat");

		(*f)++;
		printf("WAKE: %p{%x}\n", f, *f);
		tmp = futex(f, FUTEX_WAKE, 1, NULL, NULL, 0);
		SYSERROR(tmp, "futex");
		printf("WOKE: %d\n", tmp);

		tmp = shmdt(f);
		SYSERROR(tmp, "shmdt");

		exit(0);
	}

The first program will set up a SYSV IPC SHM segment and wait on a futex in it
for the number at the start to change.  The program will increment that number
and wake the first program up.  This leads to output of the form:

	SHELL 1			SHELL 2
	=======================	=======================
	# /dowait
	WAIT: 0xc32ac000{0}
				# /dowake
				WAKE: 0xc32ac000{1}
	WAITED: 0		WOKE: 1
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add documentation about using shared memory in NOMMU mode.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make mremap() partially work for NOMMU kernels.  It may resize a VMA provided
that it doesn't exceed the size of the slab object in which the storage is
allocated that the VMA refers to.  Shareable VMAs may not be resized.

Moving VMAs (as permitted by MREMAP_MAYMOVE) is not currently supported.

This patch also makes use of the fact that the VMA list is now ordered to cut
it short when possible.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Order the per-mm_struct VMA list by address so that searching it can be cut
short when the appropriate address has been exceeded.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement /proc/pid/maps for NOMMU by reading the vm_area_list attached to
current->mm->context.vmlist.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Permit ptrace to modify a section that's non-shared but is marked
unwritable, such as is obtained by mapping the text segment of an ELF-FDPIC
executable binary with into a binary that's being ptraced[*].

[*] Under NOMMU conditions ptrace causes read-only MAP_PRIVATE mmaps to become
    totally private copies because if a private mapping was actually shared
    then the debugging setting breakpoints in it would potentially crash
    other processes.

This is done by using the VM_MAYWRITE flag rather than the VM_WRITE flag
when deciding whether to permit a write.

Without this patch a debugger can't set breakpoints in the mapped text
sections of executables that are mapped read-only private, even if the
mmap() syscall has taken a private copy because PT_PTRACED is set.

In addition, VM_MAYREAD is used instead of VM_READ for similar reasons.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Check the VMA protections in get_user_pages() against what's being asked.

This checks to see that we don't accidentally write on a non-writable VMA or
permit an I/O mapping VMA to be accessed (which may lack page structs).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In NOMMU arch, if run "cat /proc/self/mem", data from physical address 0
are read.  This behavior is different from MMU arch.  In IA32, message
"cat: /proc/self/mem: Input/output error" is reported.

This issue is rootcaused by not validate the start address in NOMMU
function get_user_pages().  Following patch solves this issue.
Signed-off-by: NSonic Zhang <sonic.adi@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use find_vma() in the NOMMU version of access_process_vm() rather than
reimplementing it.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set the backing device info capabilities for /dev/mem and /dev/kmem to
permit direct sharing under no-MMU conditions and full mapping capabilities
under MMU conditions.  Make the BDI used by these available to all directly
mappable character devices.

Also comment the capabilities for /dev/zero.

[akpm@osdl.org: ifdef reductions]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Check that access_process_vm() is accessing a valid mapping in the target
process.

This limits ptrace() accesses and accesses through /proc/<pid>/maps to only
those regions actually mapped by a program.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The function is exported but not used from anywhere else.  It's also marked as
"not for driver use" so noone out there should really care.
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The empty line between the short description and the first argument
description causes a section to appear twice in the generated manpage.
Also the short description should really be short: the script can't handle
multiple lines.
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use NULL instead of 0 for pointer value, eliminate sparse warnings.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement the special memory driver (mspec) based on the do_no_pfn
approach.  The driver is currently used only on SN2 hardware with special
fetchop support but could be beneficial on other architectures using the
uncached mode.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement do_no_pfn() for handling mapping of memory without a struct page
backing it.  This avoids creating fake page table entries for regions which
are not backed by real memory.

This feature is used by the MSPEC driver and other users, where it is
highly undesirable to have a struct page sitting behind the page (for
instance if the page is accessed in cached mode via the struct page in
parallel to the the driver accessing it uncached, which can result in data
corruption on some architectures, such as ia64).

This version uses specific NOPFN_{SIGBUS,OOM} return values, rather than
expect all negative pfn values would be an error.  It also bugs on cow
mappings as this would not work with the VM.

[akpm@osdl.org: micro-optimise]
Signed-off-by: NJes Sorensen <jes@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that we have the node in the hot zone of struct zone we can avoid
accessing zone_pgdat in zone_statistics.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We do not need to allocate pagesets for unpopulated zones.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the node in order to optimize zone_to_nid.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch insures that the slab node lists in the NUMA case only contain
slabs that belong to that specific node.  All slab allocations use
GFP_THISNODE when calling into the page allocator.  If an allocation fails
then we fall back in the slab allocator according to the zonelists appropriate
for a certain context.

This allows a replication of the behavior of alloc_pages and alloc_pages node
in the slab layer.

Currently allocations requested from the page allocator may be redirected via
cpusets to other nodes.  This results in remote pages on nodelists and that in
turn results in interrupt latency issues during cache draining.  Plus the slab
is handing out memory as local when it is really remote.

Fallback for slab memory allocations will occur within the slab allocator and
not in the page allocator.  This is necessary in order to be able to use the
existing pools of objects on the nodes that we fall back to before adding more
pages to a slab.

The fallback function insures that the nodes we fall back to obey cpuset
restrictions of the current context.  We do not allocate objects from outside
of the current cpuset context like before.

Note that the implementation of locality constraints within the slab allocator
requires importing logic from the page allocator.  This is a mischmash that is
not that great.  Other allocators (uncached allocator, vmalloc, huge pages)
face similar problems and have similar minimal reimplementations of the basic
fallback logic of the page allocator.  There is another way of implementing a
slab by avoiding per node lists (see modular slab) but this wont work within
the existing slab.

V1->V2:
- Use NUMA_BUILD to avoid #ifdef CONFIG_NUMA
- Exploit GFP_THISNODE being 0 in the NON_NUMA case to avoid another
  #ifdef

[akpm@osdl.org: build fix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

GFP_THISNODE must be set to 0 in the non numa case otherwise we disable retry
and warnings for failing allocations in the SMP and UP case.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The NUMA_BUILD constant is always available and will be set to 1 on
NUMA_BUILDs.  That way checks valid only under CONFIG_NUMA can easily be done
without #ifdef CONFIG_NUMA

F.e.

if (NUMA_BUILD && <numa_condition>) {
...
}

[akpm: not a thing we'd normally do, but CONFIG_NUMA is special: it is
 causing ifdef explosion in core kernel, so let's see if this is a comfortable
 way in whcih to control that]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On larger systems, the amount of output dumped on the console when you do
SysRq-M is beyond insane.  This patch is trying to reduce it somewhat as
even with the smaller NUMA systems that have hit the desktop this seems to
be a fair thing to do.

The philosophy I have taken is as follows:
 1) If a zone is empty, don't tell, we don't need yet another line
    telling us so. The information is available since one can look up
    the fact how many zones were initialized in the first place.
 2) Put as much information on a line is possible, if it can be done
    in one line, rahter than two, then do it in one. I tried to format
    the temperature stuff for easy reading.

Change show_free_areas() to not print lines for empty zones.  If no zone
output is printed, the zone is empty.  This reduces the number of lines
dumped to the console in sysrq on a large system by several thousand lines.

Change the zone temperature printouts to use one line per CPU instead of
two lines (one hot, one cold).  On a 1024 CPU, 1024 node system, this
reduces the console output by over a million lines of output.

While this is a bigger problem on large NUMA systems, it is also applicable
to smaller desktop sized and mid range NUMA systems.

Old format:

Mem-info:
Node 0 DMA per-cpu:
cpu 0 hot: high 42, batch 7 used:24
cpu 0 cold: high 14, batch 3 used:1
cpu 1 hot: high 42, batch 7 used:34
cpu 1 cold: high 14, batch 3 used:0
cpu 2 hot: high 42, batch 7 used:0
cpu 2 cold: high 14, batch 3 used:0
cpu 3 hot: high 42, batch 7 used:0
cpu 3 cold: high 14, batch 3 used:0
cpu 4 hot: high 42, batch 7 used:0
cpu 4 cold: high 14, batch 3 used:0
cpu 5 hot: high 42, batch 7 used:0
cpu 5 cold: high 14, batch 3 used:0
cpu 6 hot: high 42, batch 7 used:0
cpu 6 cold: high 14, batch 3 used:0
cpu 7 hot: high 42, batch 7 used:0
cpu 7 cold: high 14, batch 3 used:0
Node 0 DMA32 per-cpu: empty
Node 0 Normal per-cpu: empty
Node 0 HighMem per-cpu: empty
Node 1 DMA per-cpu:
[snip]
Free pages:     5410688kB (0kB HighMem)
Active:9536 inactive:4261 dirty:6 writeback:0 unstable:0 free:338168 slab:1931 mapped:1900 pagetables:208
Node 0 DMA free:1676304kB min:3264kB low:4080kB high:4896kB active:128048kB inactive:61568kB present:1970880kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA32 free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 HighMem free:0kB min:512kB low:512kB high:512kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA free:1951728kB min:3280kB low:4096kB high:4912kB active:5632kB inactive:1504kB present:1982464kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
....

New format:

Mem-info:
Node 0 DMA per-cpu:
CPU    0: Hot: hi:   42, btch:   7 usd:  41   Cold: hi:   14, btch:   3 usd:   2
CPU    1: Hot: hi:   42, btch:   7 usd:  40   Cold: hi:   14, btch:   3 usd:   1
CPU    2: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    3: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    4: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    5: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    6: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    7: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
Node 1 DMA per-cpu:
[snip]
Free pages:     5411088kB (0kB HighMem)
Active:9558 inactive:4233 dirty:6 writeback:0 unstable:0 free:338193 slab:1942 mapped:1918 pagetables:208
Node 0 DMA free:1677648kB min:3264kB low:4080kB high:4896kB active:129296kB inactive:58864kB present:1970880kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA free:1948448kB min:3280kB low:4096kB high:4912kB active:6864kB inactive:3536kB present:1982464kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kmalloc_node() falls back to ___cache_alloc() under certain conditions and
at that point memory policies may be applied redirecting the allocation
away from the current node.  Therefore kmalloc_node(...,numa_node_id()) or
kmalloc_node(...,-1) may not return memory from the local node.

Fix this by doing the policy check in __cache_alloc() instead of
____cache_alloc().

This version here is a cleanup of Kiran's patch.

- Tested on ia64.
- Extra material removed.
- Consolidate the exit path if alternate_node_alloc() returned an object.

[akpm@osdl.org: warning fix]
Signed-off-by: NAlok N Kataria <alok.kataria@calsoftinc.com>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up the invalidate code, and use a common function to safely remove
the page from pagecache.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This moves the definition of struct page from mm.h to its own header file
page-struct.h.  This is a prereq to fix SetPageUptodate which is broken on
s390:

#define SetPageUptodate(_page)
       do {
               struct page *__page = (_page);
               if (!test_and_set_bit(PG_uptodate, &__page->flags))
                       page_test_and_clear_dirty(_page);
       } while (0)

_page gets used twice in this macro which can cause subtle bugs.  Using
__page for the page_test_and_clear_dirty call doesn't work since it causes
yet another problem with the page_test_and_clear_dirty macro as well.

In order to avoid all these problems caused by macros it seems to be a good
idea to get rid of them and convert them to static inline functions.
Because of header file include order it's necessary to have a seperate
header file for the struct page definition.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The VM is supposed to minimise the number of pages which get written off the
LRU (for IO scheduling efficiency, and for high reclaim-success rates).  But
we don't actually have a clear way of showing how true this is.

So add `nr_vmscan_write' to /proc/vmstat and /proc/zoneinfo - the number of
pages which have been written by the vm scanner in this zone and globally.

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Arch-independent zone-sizing determines the size of a node
(pgdat->node_spanned_pages) based on the physical memory that was
registered by the architecture.  However, when
CONFIG_MEMORY_HOTPLUG_RESERVE is set, the architecture expects that the
spanned_pages will be much larger and that mem_map will be allocated that
is used lated on memory hot-add.

This patch allows an architecture that sets CONFIG_MEMORY_HOTPLUG_RESERVE
to call push_node_boundaries() which will set the node beginning and end to
at *least* the requested boundary.

Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>