devm_gpio_request_one is device managed and makes error handling
and cleanup simpler.

Cc: Raphael Assenat <raph@8d.com>
Cc: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Return the value obtained from i2c_smbus_read_byte_data() instead of
-EINVAL. Silences the following smatch warning:
drivers/leds/leds-lp3944.c:89 lp3944_reg_read() info:
why not propagate 'tmp' from i2c_smbus_read_byte_data() instead of -22?
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Return the value obtained from i2c_smbus_read_byte_data() instead of
-EIO. Silences the following smatch warning:
drivers/leds/leds-lp5523.c:174 lp5523_read() info:
why not propagate 'ret' from i2c_smbus_read_byte_data() instead of -5?
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Return the value obtained from i2c_smbus_read_byte_data() instead of
-EIO. Silences the following smatch warning:
drivers/leds/leds-lp5521.c:155 lp5521_read() info:
why not propagate 'ret' from i2c_smbus_read_byte_data() instead of -5?
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

This patch fixes build warnings when CONFIG_LEDS_TRIGGERS is
disabled as below:
include/linux/leds.h:158:18: warning: 'struct led_trigger' declared inside parameter list [enabled by default]
include/linux/leds.h:158:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled
by default]
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Implements a "led_trigger_rename" function to rename a trigger with
proper locking.

This assumes that led name was originally allocated in non-constant
storage.
Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Cc: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

We don't need these sysfs files to be world writable or group writable.
These files are write-only, change them to S_IWUSR (0200).
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NG.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

We don't need the sysfs file to be world writable or group writable.
This file is write-only, change it to S_IWUSR (0200).
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NG.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The devm_kfree function allocates memory that is released
when a driver detaches. Thus, there is no reason to explicitly
call devm_kfree in probe or remove functions.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

This patch fixes build warnings as below:

drivers/leds/leds-lp5523.c: In function 'lp5523_selftest':
drivers/leds/leds-lp5523.c:496:18: warning: 'adc' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c:471:5: warning: 'vdd' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c: In function 'lp5523_probe':
drivers/leds/leds-lp5523.c:252:9: warning: 'status' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c:201:5: note: 'status' was declared here

If lp5523_read() returns an error, problems will happen. Thus,
when lp5523_read() returns an error, it should be handled.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

This patch makes leds-gpio's probe() return -EPROBE_DEFER if any of the gpios
to register are deferred themselves. This makes a change of
gpio_leds_create_of()'s return value necessary: Instead of returning NULL on
error, we now use ERR_PTR() error coding.
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The devm_ functions allocate memory that is released when a driver
detaches. This makes the code smaller and a bit simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_ioremap() for these functions.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_ioremap() for these functions.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_ioremap() for these functions.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NG.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NG.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Pull powerpc EEH bugfixes from Benjamin Herrenschmidt.

Two one-liner fixes for the new EEH code.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Do not invalidate PE properly
  powerpc/pseries: Fix oops with MSIs when missing EEH PEs

Pull MIPS fixes from Ralf Baechle:
 "Three issues fixed accross the field:

   - Some functions that were recently outlined as part of a preemption
     fix were causing problems with function tracing.
   - The recently merged in-kernel MPI library uses very outdated
     headers that contain MIPS-specific code which won't build on with
     gcc 4.4 or newer.
   - The MIPS non-NUMA memory initialization was making only a very
     half-baked attempt at merging adjacent memory ranges.  This kept
     the code simple enough but is now causing issues with kexec."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  MIPS: Fix crash that occurs when function tracing is enabled
  MIPS: Merge overlapping bootmem ranges

While the EEH does recovery on the specific PE that has PCI errors,
the PCI devices belonging to the PE will be removed and the PE will
be marked as invalid since we still need the information stored in
the PE. We only invalidate the PE when it doesn't have associated
EEH devices and valid child PEs. However, the code used to check
that is wrong. The patch fixes that.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Pull sound build error fix from Takashi Iwai:
 "Only a single commit for fixing the build error without CONFIG_PM in
  hda driver."

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix build without CONFIG_PM

I forgot this again...  codec->in_pm is in #ifdef CONFIG_PM
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pull x86 arch fixes from Peter Anvin:
 "Here is a collection of fixes for 3.7-rc7.  This is a superset of
  tglx' earlier pull request."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Fix ordering of CFI directives and recent ASM_CLAC additions
  x86, microcode, AMD: Add support for family 16h processors
  x86-32: Export kernel_stack_pointer() for modules
  x86-32: Fix invalid stack address while in softirq
  x86, efi: Fix processor-specific memcpy() build error
  x86: remove dummy long from EFI stub
  x86, mm: Correct vmflag test for checking VM_HUGETLB
  x86, amd: Disable way access filter on Piledriver CPUs
  x86/mce: Do not change worker's running cpu in cmci_rediscover().
  x86/ce4100: Fix PCI configuration register access for devices without interrupts
  x86/ce4100: Fix reboot by forcing the reboot method to be KBD
  x86/ce4100: Fix pm_poweroff
  MAINTAINERS: Update email address for Robert Richter
  x86, microcode_amd: Change email addresses, MAINTAINERS entry
  MAINTAINERS: Change Boris' email address
  EDAC: Change Boris' email address
  x86, AMD: Change Boris' email address

Pull MTD fixes from David Woodhouse:
 "The most important part of this is that it fixes a regression in
  Samsung NAND chip detection, introduced by some rework which went into
  3.7.  The initial fix wasn't quite complete, so it's in two parts.  In
  fact the first part is committed twice (Artem committed his own copy
  of the same patch) and I've merged Artem's tree into mine which
  already had that fix.

  I'd have recommitted that to make it somewhat cleaner, but figured by
  this point in the release cycle it was better to merge *exactly* the
  commits which have been in linux-next.

  If I'd recommitted, I'd also omit the sparse warning fix.  But it's
  there, and it's harmless — just marking one function as 'static' in
  onenand code.

  This also includes a couple more fixes for stable: an AB-BA deadlock
  in JFFS2, and an invalid range check in slram."

* tag 'for-linus-20121123' of git://git.infradead.org/mtd-2.6:
  mtd: nand: fix Samsung SLC detection regression
  mtd: nand: fix Samsung SLC NAND identification regression
  jffs2: Fix lock acquisition order bug in jffs2_write_begin
  mtd: onenand: Make flexonenand_set_boundary static
  mtd: slram: invalid checking of absolute end address
  mtd: ofpart: Fix incorrect NULL check in parse_ofoldpart_partitions()
  mtd: nand: fix Samsung SLC NAND identification regression

Pull device tree regression fix from Grant Likely:
 "Simple build regression fix for DT device drivers on Sparc.  An
  earlier change had masked out the of_iomap() helper on SPARC."

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  of/address: sparc: Declare of_iomap as an extern function for sparc again

Pull power management update from Rafael Wysocki:
 "Fix for an incorrect error condition check in device PM QoS code that
  may lead to an Oops from Guennadi Liakhovetski."

* tag 'pm-for-3.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: fix wrong error-checking condition

Pull md fixes from NeilBrown:
 "Several bug fixes for md in 3.7:

   - raid5 discard has problems
   - raid10 replacement devices have problems
   - bad block lock seqlock usage has problems
   - dm-raid doesn't free everything"

* tag 'md-3.7-fixes' of git://neil.brown.name/md:
  md/raid10: decrement correct pending counter when writing to replacement.
  md/raid10: close race that lose writes lost when replacement completes.
  md/raid5: Make sure we clear R5_Discard when discard is finished.
  md/raid5: move resolving of reconstruct_state earlier in stripe_handle.
  md/raid5: round discard alignment up to power of 2.
  md: make sure everything is freed when dm-raid stops an array.
  md: Avoid write invalid address if read_seqretry returned true.
  md: Reassigned the parameters if read_seqretry returned true in func md_is_badblock.