- 08 9月, 2012 4 次提交
-
-
由 Amitkumar Karwar 提交于
We should not disable "cmd_node->wait_q_enabled" flag here before calling mwifiex_insert_cmd_to_free_q() because we want to wake up the thread waiting for command completion inside this function. The wait_q_enabled flag will be disabled internally upon command completion. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
If "iw connect" command is fired for station interface, when heavy traffic is running on AP interface, internal scan operation performed before actual association is aborted. In this case we missed to release semaphore. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wei Yongjun 提交于
Using is_zero_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wei Yongjun 提交于
Using is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is broadcast address. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 8月, 2012 5 次提交
-
-
由 Dan Carpenter 提交于
We're holding the sta_list_spinlock here so we can't sleep. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Call cfg80211_michael_mic_failure() handler when there is a MIC error event from firmware. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
The key length can be 32 bytes for TKIP and 16 bytes for AES_CMAC. 'smatch' warns on memcpy using key_len variable to copy data to a 16 bytes buffer. Use fixed length to avoid the warning. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
These warnings can be detected by using powerpc64-linux toolchain (gcc-4.6.3-nolibc). CC [M] drivers/net/wireless/mwifiex/sta_event.o drivers/net/wireless/mwifiex/sta_event.c: In function 'mwifiex_process_sta_event': drivers/net/wireless/mwifiex/sta_event.c:388:4: warning: comparison of distinct pointer types lacks a cast [enabled by default] CC [M] drivers/net/wireless/mwifiex/uap_event.o drivers/net/wireless/mwifiex/uap_event.c: In function 'mwifiex_process_uap_event': drivers/net/wireless/mwifiex/uap_event.c:258:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] Use min_t() instead of min() to fix the warnings. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Fengguang Wu 提交于
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 8月, 2012 16 次提交
-
-
由 Ying Luo 提交于
The sequence counter will be sent to firmware via key_material command. Signed-off-by: NYing Luo <luoy@marvell.com> Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ying Luo 提交于
'cipher' and 'seq' coming from cfg80211 add_key handler will be parsed in mwifiex_set_encode() to handle AES_CMAC cipher suite. Signed-off-by: NYing Luo <luoy@marvell.com> Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ying Luo 提交于
This array was used for wapi_rxpn only. Now it will be used for AES_CMAC as well. So make a generic name for it. Signed-off-by: NYing Luo <luoy@marvell.com> Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
Cleanup TX/RX BA tables when AP receives deauthentication from associated station. During BSS_IDLE event, all wmm queues, BA streams created for AP interface are deleted. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds support for handling BA request and BA setup events for AP interface. RA list is marked as either 11n enabled or disabled from station's capabilities in association request. BA setup is initiated only after some specific number of packets for particular RA list are transmitted. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds support for reception and decoding of AMSDU aggregation frames for AP interface. Patch also adds support for handling AMSDU aggregation event. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
1. Separate file for uAP RX handling. 2. If received packet is broadcast/multicast, send it to kernel as well as requeue it back to uAP TX queue. 3. If received packet is for associated STA (intra-BSS), requeue it back to uAP TX queue. 4. In all other cases (packets for AP or inter-BSS packets), pass packet to kernel to handle it accordingly. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
After station is associated an entry would be added to station list. This entry would have station specific information such as 11n support, AMSDU size. The entry would be deleted after deauthentication. All station entries would be deleted during BSS_IDLE event. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
Route AP events handling to separate function defined in uap_event.c. AP specific event handling is removed from sta_event.c. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
If HT IE is present in beacon_data of start_ap cfg80211 handler, enable 11n flag in AP. Disable 11n flag when stop_ap handler is called. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Earlier scan command was postponed by 20msec multiple times to give preference to Tx traffic until we find empty wmm queue. There is a corner case in which wmm queue becomes empty immediately after processing the packet(before 20msec) and there may be next packet coming after some time. In this case we should not resume scan operation. We will use new flag to check Tx traffic and resume scan operation only if there is no traffic for 200msec. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
As per recent patch "658f37b7 mwifiex: scan less channels..." less channels are scanned per scan command in associated state. Default number of channels per scan command for normal scan are already 4, but those are 14 for SSID specific scan operation. This code change in this patch is required for SSID specific scan. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
We do similar conversion for Tx packet header but it was missing for Rx packet header. Without this fix, Rx packet header won't be correctly parsed on big endian platform. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Padding arithmetic will always work for MSDUs provided first MSDU ends on 4-byte boundary. Fixing it by making sure that all MSDU ends on 4-byte boundary. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Since commit: fb3c19bc, adding extra padding to AMSDU is redundant since same is being performed at mwifiex_11n_aggregate_pkt after forming the AMSDU packet. Fixing it by removing it. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
All MSDU subframes, except the first one in AMSDU, were being written wrongly at the location of first MSDU frame. Fixing that by copying the MSDU at skb->tail of AMSDU. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 18 7月, 2012 4 次提交
-
-
由 Amitkumar Karwar 提交于
This patch configures data rates to firmware using bitrate mask provided by cfg80211. Earlier we used to only update band information in this handler which will be used later for ibss network. Due to recent modifications in ibss join code we don't need to do that. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
In mwifiex_set_rf_channel() ibss specific flags were unnecessarily getting modified for infra and AP mode. This patch removes mwifiex_set_rf_channel() function and adds equivalant code in infra, ibss and AP path. For ibss, now we are chosing band based on channel type and basic rates provided in ibss join request. We can start ibss network in A only, B only, G only, BG, BGN, AN mode. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
1) Remove unnecessary wrapper functions. 2) Currently we don't have command to set Tx data rate, so mwifiex_rate_ioctl_set_rate_value() function and related code can be removed. 3) "ds_rate" filled by mwifiex_ret_tx_rate_cfg() is never used. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
1) Recently we removed set_channel cfg80211 handler. Also, cfg80211 blocks ibss connection requests if ibss network is already started /joined. Hence the code to restart ibss network in new channel (mwifiex_drv_change_adhoc_chan() function) becomes redundant. 2) mwifiex_bss_set_channel() function is redundant. It does some error checking and calculate adhoc start band and adhoc channel. Cfg80211 already takes care of error checking and provides correct channel information to the driver. Adhoc start band is already calculated in mwifiex_set_rf_channel() function. Other associated code is also removed in this patch. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 7月, 2012 1 次提交
-
-
由 Amitkumar Karwar 提交于
mwifiex driver supports 2x2 chips as well. Hence valid mcs values are 0 to 15. The check for mcs index is corrected in this patch. For example: if 40MHz is enabled and mcs index is 11, "iw link" command would show "tx bitrate: 108.0 MBit/s" without this patch. Now it shows "tx bitrate: 108.0 MBit/s MCS 11 40Mhz" with the patch. Cc: "3.2.y, 3.3.y, 3.4.y" <stable@vger.kernel.org> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 7月, 2012 2 次提交
-
-
由 Johannes Berg 提交于
The new P2P Device will have to be able to scan for P2P search, so move scanning to use struct wireless_dev instead of struct net_device. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
In order to be able to create P2P Device wdevs, move the virtual interface management over to wireless_dev structures. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 10 7月, 2012 8 次提交
-
-
由 Amitkumar Karwar 提交于
This enables user to set mode of Tx/Rx path using "iw set antenna" command. For non MIMO chips, the command will be used for selecting specific antenna or configuring antenna diversity mode. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
Parse WPS IEs from start_ap as well as change_beacon handlers and set them to FW. Beacon IEs, Probe Response IEs and Assoc Response IEs are parsed from beacon_data and set to FW with related masks. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
Being a fullmac driver, mwifiex takes care of populating beacon, probe response, association response WPS IEs to firmware. And firmware is responsible for constructing these frames. Advertise this to cfg80211. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds support for change_beacon handler which is needed for setting modified management IEs to driver and FW. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
All IE buffers are freshly supplied. In such case, there is no need to preserve earlier buffers with same management mask and index. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
While Head/Tail IEs may contain RSN/WPA IEs which needs to be set for all mgmt subtypes, beacon_ies, probe_resp_ies, assoc_resp_ies are for specific mgmt subtypes. Move them to separate function. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
Pass cfg80211_beacon_data pointer instead of cfg80211_ap_settings. While setting management IEs we only need cfg80211_beacon_data of cfg80211_ap_settings which has Tail IE, Head IE and other IE elements. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
> *. CID 709078: Resource leak (RESOURCE_LEAK) > - drivers/net/wireless/mwifiex/cfg80211.c, line: 935 > Assigning: "bss_cfg" = storage returned from "kzalloc(132UL, 208U)" > - but was not free > drivers/net/wireless/mwifiex/cfg80211.c:935 Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-