Commit 46fb9995 ("media: platform: place NXP drivers on a separate dir")
moves various files in media/platform into a nxp subdirectory. It adjusts
the section MEDIA DRIVER FOR FREESCALE IMX PXP in MAINTAINERS, but misses
some references in NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and MEDIA DRIVERS
FOR FREESCALE IMX7.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Adjust the file references in the NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and
MEDIA DRIVERS FOR FREESCALE IMX7 sections.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The v4l2_m2m_dev structure documentation incorrectly references the
v4l2_m2m_unregister_media_controller() function when it actually means
v4l2_m2m_register_media_controller(). Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

smb_word_op() has a parameter data_format that
determines if the data is either a byte or
word.  From inspection, smb_word_op() is only
used by the macros smb_wr16() and smb_rd16()
both pass in CMD_WORD_DATA. There is no use of
smb_word_op() that passes in CMD_BYTE_DATA.
So remove the byte handling.
Signed-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The subdevice entity function was left unset, which produces a warning
when probing the device:

mxc-md bus@58000000:camera: Entity type for entity rdacm20 19-0051 was
not initialized!

This patch will set entity function to MEDIA_ENT_F_CAM_SENSOR and leave
flags unset.

Fixes: 34009bff ("media: i2c: Add RDACM20 driver")
Fixes: a59f853b ("media: i2c: Add driver for RDACM21 camera module")
Signed-off-by: NLaurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Fix smatch warning in mxc_jpeg_queue_setup, check *nplanes against
current format:

drivers/media/platform/imx-jpeg/mxc-jpeg.c:1070
mxc_jpeg_queue_setup()
         warn: potential user controlled iterator 'i' (array size 2 vs 7)
Signed-off-by: NMirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

After sending a patch to Rick Chang, the mediatek mail server responded:

  ** Message not delivered **

  Your message couldn't be delivered to rick.chang@mediatek.com because
  the remote server is misconfigured. See technical details below for more
  information.

  The response from the remote server was:
  550 Relaying mail to rick.chang@mediatek.com is not allowed

So, drop Rick Chang from the MEDIATEK JPEG DRIVER section.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: NMiles Chen <miles.chen@mediatek.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Commit 9cdd70ce ("media: dt-bindings: media: mtk-vcodec: Separate video
encoder and decoder dt-bindings") converts and splits mediatek-vcodec.txt
to mediatek,vcodec-{de,en}coder.yaml, but missed to adjust its reference
in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in MEDIATEK MEDIA DRIVER.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Commit a16ce2f3 ("media: dt-bindings: mediatek: convert mtk jpeg
decoder/encoder to yaml") converts mediatek-jpeg-decoder.txt to yaml, but
missed to adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

While touching this section, generalize the file entry to also cover the
encoder yaml devicetree, as the driver directory also includes the encoder.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Don't populate the read-only array table on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: NColin Ian King <colin.i.king@gmail.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Commit ccc30162 ("media: dt: bindings: tegra-vde: Convert to schema")
converts nvidia,tegra-vde.txt to nvidia,tegra-vde.yaml, but missed to
adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in  MEDIA DRIVERS FOR NVIDIA TEGRA - VDE.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().

Fixes: 0a0e2655 ("media: atmel: atmel-isc: split driver into driver base and isc")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().

Fixes: f386509e ("[media] st-delta: STiH4xx multi-format video decoder v4l2 driver")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Acked-by: NHugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

If probe fails then we need to call pm_runtime_disable() to balance
out the previous pm_runtime_enable() call.

Fixes: 9a761e43 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Reviewed-by: NKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

A dma_free_coherent() call is missing in the error handling path of the
probe, as already done in the remove function.

In fact, this call is included in aspeed_video_free_buf(). So use the
latter both in the error handling path of the probe and in the remove
function.
It is easier to see the relation with aspeed_video_alloc_buf() this way.

Fixes: d2b4387f ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The encoder node may be dependent on a power-domain. Add a property for
it.
Signed-off-by: NNícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

This patch aims to add UVC_GUID_FORMAT_H265
High Efficiency Video Coding (HEVC), also known as H.265 and MPEG-H Part 2.
They describe the same video encoding method.
So for handling their behavior is the same.
However, when external camera device describes this encoding method,
some use hevc, some use h265.
There is no uniform specification to describe this encoding method.
So if an external camera device use h265 to describe this encoding method,
driver will not recognize it.
Therefore, this patch is to enable driver to read HEVC/H265
and convert it to V4L2_PIX_FMT_HEVC.
Signed-off-by: NJames_Lin <Ping-lei.Lin@mediatek.com>
Reviewed-by: NRicardo Ribalda <ribalda@chromium.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Replace manual decoding of psize in uvc_parse_streaming(), with the code
from uvc_endpoint_max_bpi(). It also handles usb3 devices.
Signed-off-by: NRicardo Ribalda <ribalda@chromium.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The case USB_SPEED_WIRELESS and the default one were doing the same.

Also, make always use of usb_endpoint_maxp_mult, as it should have a
sane value, even for LOW speed and WIRELESS.
Signed-off-by: NRicardo Ribalda <ribalda@chromium.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Move all the life cycle of the name to add_mapping. This simplifies
the error handling inside uvc_ioctl_ctrl_map and solves a memory leak
when kemmdup fails.

Also make sure that for custom controls, the user provides a valid name.

Fixes: 07adedb5c606 ("media: uvcvideo: Use control names from framework")
Signed-off-by: NRicardo Ribalda <ribalda@chromium.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

probe->dwMaxPayloadTransferSize is a 32bit value, but bandwidth is 16bit. This
may lead to a bit overflow.
Signed-off-by: NHangyu Hua <hbh25y@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The list iterator will point to a bogus position containing HEAD if
the list is empty or the element is not found in list. This case
should be checked before any use of the iterator, otherwise it will
lead to a invalid memory access. The missing check here is before
"pin = iterm->id;", just add check here to fix the security bug.

In addition, the list iterator value will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the element is not found in list, considering
the (mis)use here: "if (iterm == NULL".

Use a new value 'it' as the list iterator, while use the old value
'iterm' as a dedicated pointer to point to the found element, which
1. can fix this bug, due to 'iterm' is NULL only if it's not found.
2. do not need to change all the uses of 'iterm' after the loop.
3. can also limit the scope of the list iterator 'it' *only inside*
   the traversal loop by simply declaring 'it' inside the loop in the
   future, as usage of the iterator outside of the list_for_each_entry
   is considered harmful. https://lkml.org/lkml/2022/2/17/1032

Fixes: d5e90b7a ("[media] uvcvideo: Move to video_ioctl2")
Signed-off-by: NXiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

As discussed with other developers, the linux-uvc-devel mailing list is
not very useful anymore, and it's better to send people to the general
linux-media mailing list.

Replace/remove the old mailing list address in uvcvideo.rst and
MAINTAINERS.
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Do not handroll mdelay().
Suggested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The indentation was wrong, causing the documentation build to
fail with:

Sphinx parallel build error:
docutils.utils.SystemMessagePropagation: <system_message level="3" line="1202" source="/home/hans/work/src/v4l/media-git/Documentation/media/userspace-api/v4l/ext-ctrls-codec.rst"
type="ERROR"><paragraph>Error parsing content block for the "flat-table" directive: two-level bullet list expected, but row 1 does not contain a second-level bullet list.</paragraph><literal_block
xml:space="preserve">.. flat-table::
    :header-rows:  0
    :stub-columns: 0

    * - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_RANDOM``
      - The whole frame is completely refreshed randomly
      after the specified period.
    * - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_CYCLIC``
      - The whole frame MBs are completely refreshed in cyclic order
      after the specified period.

</literal_block></system_message>
make[1]: *** [Documentation/Makefile:96: htmldocs] Error 2
make: *** [Makefile:1678: htmldocs] Error 2

Link: https://lore.kernel.org/linux-media/62b53cbb-f3e2-ed8a-bba2-3f4145d9b8db@xs4all.nl
Fixes: fcbc4acf ("media: v4l2-ctrls: Add intra-refresh type control")
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

There is no need to pass 'default n' in Kconfig, as by default the
CONFIG_VIDEO_IMX_MIPI_CSIS option is not selected.
Signed-off-by: NFabio Estevam <festevam@denx.de>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Commit 5c0701a0 ("media: imx: csis: Store pads format separately")
broke initialization of the active format on the source pad, as it
forgot to update the .init_cfg() handler. Fix it.

Fixes: 5c0701a0 ("media: imx: csis: Store pads format separately")
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The mipi_csis_dump_regs() function accesses the interface registers
in order to printout their values for debug purposes.

As the function access the registers, it requires the interface to be
powered up. Currently this is only enforced in one of the function's
callers (mipi_csis_log_status)() but not when the function is called by
the debugfs attribute handler.

Make sure to access registers only if the interface is powered up and
remove the same check from the caller.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The mipi_csis_device.powered flag only serves for the purpose of
not accessing registers in mipi_csis_log_status() when the interface
is not powered up.

Instead of manually tracking the power state, rely on
pm_runtime_get_if_in_use() to remove the 'powered' flag. Also remove
the locking in the function as runtime_pm() is refcounted and there's no
risk of the interface being powered down behind our backs.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Simplify the mipi_csis_s_stream() function.

This actually fixes a bug, as if calling the subdev's s_stream(1) fails,
mipi_csis_stop_stream() was not called.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The runtime PM resume handler is guaranteed to be called on a suspended
device, and the suspend handler on a resumed device. The implementation
can thus be simplified.

While at it, rename the mipi_csis_device state field to powered, as the
now state contains a single flag only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Streaming is guaranteed to have been stopped by the time the device gets
runtime suspended, as pm_runtime_put() is called from .s_stream(0) only.
Drop the manual stop.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

There's no need to implement system suspend/resume manually, as video
pipelines are supposed to be suspended in a controlled and ordered
manner by the data sink driver at system suspend time (and similarly at
resume time). Drop the system suspend/resume handlers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The subdev .s_power() operation is deprecated. Drop it, requiring sensor
drivers to correctly use runtime PM instead of relying on .s_power().

As this driver has just been moved out of staging, and necessary drivers
to implement a full camera pipeline are still in staging, no platform
depends yet on this API being called. There is thus no risk of
regression.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Usage of "state" for the device-specific data structure is confusing, as
it can also refer to the subdev state. Rename the structure to
mipi_csis_device, and the corresponding state variables to csis.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The payload size for encoder capture buffers is set by the driver upon
finishing encoding each frame, based on the encoded length returned from
hardware, and whatever header and padding length used. Setting a
non-zero default serves no real purpose, and also causes issues if the
capture buffer is returned to userspace unused, confusing the
application.

Instead, always set the payload size to 0 for encoder capture buffers
when preparing them.

Fixes: 775fec69 ("media: add Rockchip VPU JPEG encoder driver")
Fixes: 082aaecf ("media: hantro: Fix .buf_prepare")
Signed-off-by: NChen-Yu Tsai <wenst@chromium.org>
Reviewed-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The V4L2 stateful encoder uAPI specification requires that drivers
support the ENCODER_CMD ioctl to allow draining of buffers. This
however was not implemented, and causes issues for some userspace
applications.

Implement support for the ENCODER_CMD ioctl using v4l2-mem2mem helpers.
This is entirely based on existing code found in the vicodec test
driver.

Fixes: 775fec69 ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: NChen-Yu Tsai <wenst@chromium.org>
Reviewed-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8
video formats.

This patch adds RK3568 compatible in rockchip-vpu dt-bindings.

Tested on [1] with FFmpeg v4l2_request code taken from [2]
with MPEG2, H.642 and VP8 samples with results [3].

[1] https://github.com/warpme/minimyth2
[2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch
[3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txtSigned-off-by: NPiotr Oniszczuk <piotr.oniszczuk@gmail.com>
Reviewed-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8
video formats.

This patch adds support for RK356x family in existing Hantro
video decoder kernel driver.

Tested on [1] with FFmpeg v4l2_request code taken from [2]
with MPEG2, H.642 and VP8 samples with results [3].

[1] https://github.com/warpme/minimyth2
[2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch
[3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txtSigned-off-by: NPiotr Oniszczuk <piotr.oniszczuk@gmail.com>
Reviewed-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

For interlaced frame, the amphion vpu will store the
two fields sequential into one buffer, top-bottom order
so the field should be set to V4L2_FIELD_SEQ_TB.
fix the previous bug that set it to V4L2_FIELD_SEQ_BT wrongly.

Fixes: 6de8d628 ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: NMing Qian <ming.qian@nxp.com>
Reviewed-by: NNicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

use if and else instead of if(A) and if (!A).
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>