- 01 7月, 2006 40 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV6]: Added GSO support for TCPv6 [NET]: Generalise TSO-specific bits from skb_setup_caps [IPV6]: Added GSO support for TCPv6 [IPV6]: Remove redundant length check on input [NETFILTER]: SCTP conntrack: fix crash triggered by packet without chunks [TG3]: Update version and reldate [TG3]: Add TSO workaround using GSO [TG3]: Turn on hw fix for ASF problems [TG3]: Add rx BD workaround [TG3]: Add tg3_netif_stop() in vlan functions [TCP]: Reset gso_segs if packet is dodgy
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Set alternate port number when initializing QP attributes IB/uverbs: Set correct user handle for user SRQs
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6/由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6/: [PATCH] pcmcia: fix deadlock in pcmcia_parse_events [PATCH] com20020_cs: more device support [PATCH] au1xxx: pcmcia: fix __init called from non-init [PATCH] kill open-coded offsetof in cm4000_cs.c ZERO_DEV() [PATCH] pcmcia: convert pcmcia_cs to kthread [PATCH] pcmcia: fix kernel-doc function name [PATCH] pcmcia: hostap_cs.c - 0xc00f,0x0000 conflicts with pcnet_cs [PATCH] pcmcia: at91_cf suspend/resume/wakeup [PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available [PATCH] pcmcia: TI PCIxx12 CardBus controller support [PATCH] pcmcia: warn if driver requests exclusive, but gets a shared IRQ [PATCH] pcmcia: expose tool in pcmcia/Documentation/pcmcia/ [PATCH] pcmcia: another ID for serial_cs.c [PATCH] yenta: fix hidden PCI bus numbers [PATCH] yenta: do power-up only after socket is configured
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4290): Add support for the TCL M2523_3DB_E tuner. V4L/DVB (4289): Missing statement in drivers/media/dvb/frontends/cx22700.c V4L/DVB (4288): Clean out a zillion sparse warnings in pvrusb2 V4L/DVB (4287): Pvrusb2/: possible cleanups V4L/DVB (4285): Cx88: add support for Geniatech Digistar / Digiwave 103g V4L/DVB (4284): Cx24123: fix set_voltage function according to the specs V4L/DVB (4282): Fix: use swzigzag for swalgo V4L/DVB (4281): TDA9887_SET_CONFIG should only be handled by the tda9887. V4L/DVB (4277): Fix CI interface on PRO KNC1 cards V4L/DVB (4276): Fix CI on old KNC1 DVBC cards V4L/DVB (4275): The FE_SET_FRONTEND_TUNE_MODE ioctl always returns EOPNOTSUPP V4L/DVB (4274): Eliminate use of tda9887 from pvrusb2 driver V4L/DVB (4273): Always log pvrusb2 device register / unregister events V4L/DVB (4272): Fix tveeprom supported standards V4L/DVB (4270): Add tda9887-specific tuner configuration V4L/DVB (4269): Subject: videocodec: make 1-bit fields unsigned V4L/DVB (4267): Remove all instances of request_module("tda9887") V4L/DVB (4264): Cx88-blackbird: implement VIDIOC_QUERYCTRL and VIDIOC_QUERYMENU
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (25 commits) ACPI: Kconfig: ACPI_SRAT depends on ACPI ACPI: drivers/acpi/scan.c: make acpi_bus_type static ACPI: fixup memhotplug debug message ACPI: ACPICA 20060623 ACPI: C-States: only demote on current bus mastering activity ACPI: C-States: bm_activity improvements ACPI: C-States: accounting of sleep states ACPI: additional blacklist entry for ThinkPad R40e ACPI: restore comment justifying 'extra' P_LVLx access ACPI: fix battery on HP NX6125 ACPIPHP: prevent duplicate slot numbers when no _SUN ACPI: static-ize handle_hotplug_event_func() ACPIPHP: use ACPI dock driver ACPI: dock driver KEVENT: add new uevent for dock ACPI: asus_acpi_init: propagate correct return value [ACPI] Print error message if remove/install notify handler fails ACPI: delete tracing macros from drivers/acpi/*.c ACPI: HW P-state coordination support ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...) ...
-
由 Herbert Xu 提交于
This patch adds GSO support for IPv6 and TCPv6. This is based on a patch by Ananda Raju <Ananda.Raju@neterion.com>. His original description is: This patch enables TSO over IPv6. Currently Linux network stacks restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from "dev->features". This patch will remove this restriction. This patch will introduce a new flag NETIF_F_TSO6 which will be used to check whether device supports TSO over IPv6. If device support TSO over IPv6 then we don't clear of NETIF_F_TSO and which will make the TCP layer to create TSO packets. Any device supporting TSO over IPv6 will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO. In case when user disables TSO using ethtool, NETIF_F_TSO will get cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't get TSO packets created by TCP layer. SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet. SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature. UFO is supported over IPv6 also The following table shows there is significant improvement in throughput with normal frames and CPU usage for both normal and jumbo. -------------------------------------------------- | | 1500 | 9600 | | ------------------|-------------------| | | thru CPU | thru CPU | -------------------------------------------------- | TSO OFF | 2.00 5.5% id | 5.66 20.0% id | -------------------------------------------------- | TSO ON | 2.63 78.0 id | 5.67 39.0% id | -------------------------------------------------- Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch generalises the TSO-specific bits from sk_setup_caps by adding the sk_gso_type member to struct sock. This makes sk_setup_caps generic so that it can be used by TCPv6 or UFO. The only catch is that whoever uses this must provide a GSO implementation for their protocol which I think is a fair deal :) For now UFO continues to live without a GSO implementation which is OK since it doesn't use the sock caps field at the moment. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds GSO support for IPv6 and TCPv6. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
We don't need to check skb->len when we're just about to call pskb_may_pull since that checks it for us. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When a packet without any chunks is received, the newconntrack variable in sctp_packet contains an out of bounds value that is used to look up an pointer from the array of timeouts, which is then dereferenced, resulting in a crash. Make sure at least a single chunk is present. Problem noticed by George A. Theall <theall@tenablesecurity.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 3.61. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Use GSO to workaround a rare TSO bug on some chips. This hardware bug may be triggered when the TSO header size is greater than 80 bytes. When this condition is detected in a TSO packet, the driver will use GSO to segment the packet to workaround the hardware bug. Thanks to Juergen Kreileder <jk@blackdown.de> for reporting the problem and collecting traces to help debug the problem. And thanks to Herbert Xu <herbert@gondor.apana.org.au> for providing the GSO mechanism that happens to be the perfect workaround for this problem. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Clear a bit to enable a hardware fix for some ASF related problem. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add workaround to limit the burst size of rx BDs being DMA'ed to the chip. This works around hardware errata on a number of 5750, 5752, and 5755 chips. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add tg3_netif_stop() when changing the vlgrp (vlan group) pointer. It is necessary to quiesce the device before changing that pointer. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
I wasn't paranoid enough in verifying GSO information. A bogus gso_segs could upset drivers as much as a bogus header would. Let's reset it in the per-protocol gso_segment functions. I didn't verify gso_size because that can be verified by the source of the dodgy packets. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Hefty 提交于
Set alternate port number when initializing QP attributes. This bug is OpenFabrics bugzilla bug #160. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Store away the user handle passed in from userspace when creating an SRQ, so that the kernel can return the correct handle when an SRQ asynchronous event occurs. (A 0 was incorrectly stored as the user handle as part of the changes in 9ead190b, "IB/uverbs: Don't serialize with ib_uverbs_idr_mutex") Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Arjan van de Ven 提交于
The PCMCIA layer calls pcmcia_parse_events both from user context and IRQ context; the lock thus needs to be irqsave to avoid deadlocks Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Marc Sowen 提交于
Enable the com20020_cs arcnet driver to see the SoHard (now Mercury Computer Systems Inc.) SH ARC-PCMCIA card. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Domen Puncer 提交于
This must not be marked __init, as it is called from au1x00_drv_pcmcia_probe. Signed-off-by: NDomen Puncer <domen.puncer@ultra.si> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Al Viro 提交于
... to make sure that it doesn't break again when a field changes (see "[PATCH] pcmcia: fix zeroing of cm4000_cs.c data" for recent example). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Serge E. Hallyn 提交于
Convert pcmcia_cs to use kthread instead of the deprecated kernel_thread. Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Randy Dunlap 提交于
Fix kernel-doc function name spello. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Komuro 提交于
Comment out the ID 0xc00f,0x0000 in hostap_cs.c, as it conflicts with the pcnet_cs driver. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 David Brownell 提交于
AT91 CF updates, mostly for power management: - Add suspend/resume methods to the AT91 CF driver, disabling non-wakeup IRQs during system suspend. The card detect IRQ serves as a wakeup event source. - Convert the driver to the more-current "platform_driver" style. So inserting or removing a CF card will wake the system, unless that has been disabled by updating the sysfs file; and there will be no more warnings about spurious IRQs during suspend/resume cycles. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Thomas Kleffel 提交于
This patch enables ide_cs to access CF-cards via their common memory rather than via their IO space. Signed-off-by: NThomas Kleffel <tk@maintech.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Alex Williamson 提交于
The patch below adds support for the TI PCIxx12 CardBus controllers. This seems to be sufficient to detect the cardbus bridge on an HP nc6320 and works with an orinoco wifi card. Signed-off-by: NAlex Williamson <alex.williamson@hp.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Alan Cox 提交于
The patch below cleans up the pcmcia code a bit on the IRQ side (I did this while debugging the problem just so I could read wtf it was doing), and also adds a warning and passes back the correct information when a device asks for exclusive but gets given shared. This at least means the dmesg dump of a problem triggered by this will have a signature to find. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Randy Dunlap 提交于
Expose example and tool source files in the Documentation/ directory in their own files instead of being buried (almost hidden) in readme/txt files. This will make them more visible/usable to users who may need to use them, to developers who may need to test with them, and to janitors who would update them if they were more visible. Also, if any of these possibly should not be in the kernel tree at all, it will be clearer that they are here and we can discuss if they should be removed. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Add an ID for "GlobeTrotter" cards which need a CIS override Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Bernhard Kaindl 提交于
Fixup the subordinate number parent bridge of yenta Cardbus Bridges before the PCI bus scan starts to make the cardbus cards which are otherwise hidden for PCI scans work. Signed-off-by: NBernhard Kaindl <bk@suse.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
Power-up the card only after the socket is configured. power-down in the old place. The point is not to power-up the card before the interrupt routing is set up correctly. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Eric Sesterhenn 提交于
Stumbled over this because of coverity (id #492), seems like we are missing a return statement here and fail to do proper bounds checking. If this assumption is false we should at least change the identation to make it clear Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch contains the following possible cleanups: - make needlessly global code static - #if 0 unused global functions Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Saqeb Akhter 提交于
This patch adds support for the Geniatech Digistar, aka Digiwave 103g DVB-S card. Acked-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NSaqeb Akhter <johoja@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Saqeb Akhter 提交于
The set_voltage function in cx24123.c was corrected to match how it is described in the CX24123 specs, producing the correct behaviour for cards that require it. Acked-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NSaqeb Akhter <johoja@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-