Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 14 12月, 2013 1 次提交
    • J
      libceph: block I/O when PAUSE or FULL osd map flags are set · d29adb34
      由 Josh Durgin 提交于 
      The PAUSEWR and PAUSERD flags are meant to stop the cluster from
processing writes and reads, respectively. The FULL flag is set when
the cluster determines that it is out of space, and will no longer
process writes.  PAUSEWR and PAUSERD are purely client-side settings
already implemented in userspace clients. The osd does nothing special
with these flags.

When the FULL flag is set, however, the osd responds to all writes
with -ENOSPC. For cephfs, this makes sense, but for rbd the block
layer translates this into EIO.  If a cluster goes from full to
non-full quickly, a filesystem on top of rbd will not behave well,
since some writes succeed while others get EIO.

Fix this by blocking any writes when the FULL flag is set in the osd
client. This is the same strategy used by userspace, so apply it by
default.  A follow-on patch makes this configurable.

__map_request() is called to re-target osd requests in case the
available osds changed.  Add a paused field to a ceph_osd_request, and
set it whenever an appropriate osd map flag is set.  Avoid queueing
paused requests in __map_request(), but force them to be resent if
they become unpaused.

Also subscribe to the next osd map from the monitor if any of these
flags are set, so paused requests can be unblocked as soon as
possible.

Fixes: http://tracker.ceph.com/issues/6079Reviewed-by: NSage Weil <sage@inktank.com>
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>
      d29adb34
  3. 03 12月, 2013 1 次提交
  5. 29 11月, 2013 1 次提交
    • S
      efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed · e0d59733
      由 Seiji Aguchi 提交于 
      Currently, when mounting pstore file system, a read callback of
efi_pstore driver runs mutiple times as below.

- In the first read callback, scan efivar_sysfs_list from head and pass
  a kmsg buffer of a entry to an upper pstore layer.
- In the second read callback, rescan efivar_sysfs_list from the entry
  and pass another kmsg buffer to it.
- Repeat the scan and pass until the end of efivar_sysfs_list.

In this process, an entry is read across the multiple read function
calls. To avoid race between the read and erasion, the whole process
above is protected by a spinlock, holding in open() and releasing in
close().

At the same time, kmemdup() is called to pass the buffer to pstore
filesystem during it. And then, it causes a following lockdep warning.

To make the dynamic memory allocation runnable without taking spinlock,
holding off a deletion of sysfs entry if it happens while scanning it
via efi_pstore, and deleting it after the scan is completed.

To implement it, this patch introduces two flags, scanning and deleting,
to efivar_entry.

On the code basis, it seems that all the scanning and deleting logic is
not needed because __efivars->lock are not dropped when reading from the
EFI variable store.

But, the scanning and deleting logic is still needed because an
efi-pstore and a pstore filesystem works as follows.

In case an entry(A) is found, the pointer is saved to psi->data.  And
efi_pstore_read() passes the entry(A) to a pstore filesystem by
releasing  __efivars->lock.

And then, the pstore filesystem calls efi_pstore_read() again and the
same entry(A), which is saved to psi->data, is used for resuming to scan
a sysfs-list.

So, to protect the entry(A), the logic is needed.

[    1.143710] ------------[ cut here ]------------
[    1.144058] WARNING: CPU: 1 PID: 1 at kernel/lockdep.c:2740 lockdep_trace_alloc+0x104/0x110()
[    1.144058] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
[    1.144058] Modules linked in:
[    1.144058] CPU: 1 PID: 1 Comm: systemd Not tainted 3.11.0-rc5 #2
[    1.144058]  0000000000000009 ffff8800797e9ae0 ffffffff816614a5 ffff8800797e9b28
[    1.144058]  ffff8800797e9b18 ffffffff8105510d 0000000000000080 0000000000000046
[    1.144058]  00000000000000d0 00000000000003af ffffffff81ccd0c0 ffff8800797e9b78
[    1.144058] Call Trace:
[    1.144058]  [<ffffffff816614a5>] dump_stack+0x54/0x74
[    1.144058]  [<ffffffff8105510d>] warn_slowpath_common+0x7d/0xa0
[    1.144058]  [<ffffffff8105517c>] warn_slowpath_fmt+0x4c/0x50
[    1.144058]  [<ffffffff8131290f>] ? vsscanf+0x57f/0x7b0
[    1.144058]  [<ffffffff810bbd74>] lockdep_trace_alloc+0x104/0x110
[    1.144058]  [<ffffffff81192da0>] __kmalloc_track_caller+0x50/0x280
[    1.144058]  [<ffffffff815147bb>] ? efi_pstore_read_func.part.1+0x12b/0x170
[    1.144058]  [<ffffffff8115b260>] kmemdup+0x20/0x50
[    1.144058]  [<ffffffff815147bb>] efi_pstore_read_func.part.1+0x12b/0x170
[    1.144058]  [<ffffffff81514800>] ? efi_pstore_read_func.part.1+0x170/0x170
[    1.144058]  [<ffffffff815148b4>] efi_pstore_read_func+0xb4/0xe0
[    1.144058]  [<ffffffff81512b7b>] __efivar_entry_iter+0xfb/0x120
[    1.144058]  [<ffffffff8151428f>] efi_pstore_read+0x3f/0x50
[    1.144058]  [<ffffffff8128d7ba>] pstore_get_records+0x9a/0x150
[    1.158207]  [<ffffffff812af25c>] ? selinux_d_instantiate+0x1c/0x20
[    1.158207]  [<ffffffff8128ce30>] ? parse_options+0x80/0x80
[    1.158207]  [<ffffffff8128ced5>] pstore_fill_super+0xa5/0xc0
[    1.158207]  [<ffffffff811ae7d2>] mount_single+0xa2/0xd0
[    1.158207]  [<ffffffff8128ccf8>] pstore_mount+0x18/0x20
[    1.158207]  [<ffffffff811ae8b9>] mount_fs+0x39/0x1b0
[    1.158207]  [<ffffffff81160550>] ? __alloc_percpu+0x10/0x20
[    1.158207]  [<ffffffff811c9493>] vfs_kern_mount+0x63/0xf0
[    1.158207]  [<ffffffff811cbb0e>] do_mount+0x23e/0xa20
[    1.158207]  [<ffffffff8115b51b>] ? strndup_user+0x4b/0xf0
[    1.158207]  [<ffffffff811cc373>] SyS_mount+0x83/0xc0
[    1.158207]  [<ffffffff81673cc2>] system_call_fastpath+0x16/0x1b
[    1.158207] ---[ end trace 61981bc62de9f6f4 ]---
Signed-off-by: NSeiji Aguchi <seiji.aguchi@hds.com>
Tested-by: NMadper Xie <cxie@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      e0d59733
  7. 28 11月, 2013 1 次提交
  9. 26 11月, 2013 1 次提交
    • T
      ARM: tegra: Provide dummy powergate implementation · 9886e1fd
      由 Thierry Reding 提交于 
      In order to support increased build test coverage for drivers, implement
dummies for the powergate implementation. This will allow the drivers to
be built without requiring support for Tegra to be selected.

This patch solves the following build errors, which can be triggered in
v3.13-rc1 by selecting DRM_TEGRA without ARCH_TEGRA:

drivers/built-in.o: In function `gr3d_remove':
drivers/gpu/drm/tegra/gr3d.c:321: undefined reference to `tegra_powergate_power_off'
drivers/gpu/drm/tegra/gr3d.c:325: undefined reference to `tegra_powergate_power_off'
drivers/built-in.o: In function `gr3d_probe':
drivers/gpu/drm/tegra/gr3d.c:266: undefined reference to `tegra_powergate_sequence_power_up'
drivers/gpu/drm/tegra/gr3d.c:273: undefined reference to `tegra_powergate_sequence_power_up'
Signed-off-by: NThierry Reding <treding@nvidia.com>
[swarren, updated commit description]
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>
      9886e1fd
  11. 25 11月, 2013 2 次提交
  13. 22 11月, 2013 3 次提交
    • K
      mm: place page->pmd_huge_pte to right union · 7aa555bf
      由 Kirill A. Shutemov 提交于 
      I don't know what went wrong, mis-merge or something, but ->pmd_huge_pte
placed in wrong union within struct page.

In original patch[1] it's placed to union with ->lru and ->slab, but in
commit e009bb30 ("mm: implement split page table lock for PMD
level") it's in union with ->index and ->freelist.

That union seems also unused for pages with table tables and safe to
re-use, but it's not what I've tested.

Let's move it to original place.  It fixes indentation at least.  :)

[1] https://lkml.org/lkml/2013/10/7/288Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7aa555bf
    • A
      mm: hugetlbfs: fix hugetlbfs optimization · 27c73ae7
      由 Andrea Arcangeli 提交于 
      Commit 7cb2ef56 ("mm: fix aio performance regression for database
caused by THP") can cause dereference of a dangling pointer if
split_huge_page runs during PageHuge() if there are updates to the
tail_page->private field.

Also it is repeating compound_head twice for hugetlbfs and it is running
compound_head+compound_trans_head for THP when a single one is needed in
both cases.

The new code within the PageSlab() check doesn't need to verify that the
THP page size is never bigger than the smallest hugetlbfs page size, to
avoid memory corruption.

A longstanding theoretical race condition was found while fixing the
above (see the change right after the skip_unlock label, that is
relevant for the compound_lock path too).

By re-establishing the _mapcount tail refcounting for all compound
pages, this also fixes the below problem:

  echo 0 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages

  BUG: Bad page state in process bash  pfn:59a01
  page:ffffea000139b038 count:0 mapcount:10 mapping:          (null) index:0x0
  page flags: 0x1c00000000008000(tail)
  Modules linked in:
  CPU: 6 PID: 2018 Comm: bash Not tainted 3.12.0+ #25
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x55/0x76
    bad_page+0xd5/0x130
    free_pages_prepare+0x213/0x280
    __free_pages+0x36/0x80
    update_and_free_page+0xc1/0xd0
    free_pool_huge_page+0xc2/0xe0
    set_max_huge_pages.part.58+0x14c/0x220
    nr_hugepages_store_common.isra.60+0xd0/0xf0
    nr_hugepages_store+0x13/0x20
    kobj_attr_store+0xf/0x20
    sysfs_write_file+0x189/0x1e0
    vfs_write+0xc5/0x1f0
    SyS_write+0x55/0xb0
    system_call_fastpath+0x16/0x1b
Signed-off-by: NKhalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Tested-by: NKhalid Aziz <khalid.aziz@oracle.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      27c73ae7
    • D
      mm: thp: give transparent hugepage code a separate copy_page · 30b0a105
      由 Dave Hansen 提交于 
      Right now, the migration code in migrate_page_copy() uses copy_huge_page()
for hugetlbfs and thp pages:

       if (PageHuge(page) || PageTransHuge(page))
                copy_huge_page(newpage, page);

So, yay for code reuse.  But:

  void copy_huge_page(struct page *dst, struct page *src)
  {
        struct hstate *h = page_hstate(src);

and a non-hugetlbfs page has no page_hstate().  This works 99% of the
time because page_hstate() determines the hstate from the page order
alone.  Since the page order of a THP page matches the default hugetlbfs
page order, it works.

But, if you change the default huge page size on the boot command-line
(say default_hugepagesz=1G), then we might not even *have* a 2MB hstate
so page_hstate() returns null and copy_huge_page() oopses pretty fast
since copy_huge_page() dereferences the hstate:

  void copy_huge_page(struct page *dst, struct page *src)
  {
        struct hstate *h = page_hstate(src);
        if (unlikely(pages_per_huge_page(h) > MAX_ORDER_NR_PAGES)) {
  ...

Mel noticed that the migration code is really the only user of these
functions.  This moves all the copy code over to migrate.c and makes
copy_huge_page() work for THP by checking for it explicitly.

I believe the bug was introduced in commit b32967ff ("mm: numa: Add
THP migration for the NUMA working set scanning fault case")

[akpm@linux-foundation.org: fix coding-style and comment text, per Naoya Horiguchi]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      30b0a105
  15. 21 11月, 2013 3 次提交
    • M
      net/phy: Add the autocross feature for forced links on VSC82x4 · 3fb69bca
      由 Madalin Bucur 提交于 
      Add auto-MDI/MDI-X capability for forced (autonegotiation disabled)
10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static
function genphy_setup_forced() required by the new config_aneg handler
in the Vitesse PHY module.
Signed-off-by: NMadalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: NShruti Kanetkar <Shruti@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3fb69bca
    • H
      net: rework recvmsg handler msg_name and msg_namelen logic · f3d33426
      由 Hannes Frederic Sowa 提交于 
      This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller <davem@davemloft.net>
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f3d33426
    • L
      Revert "mm: create a separate slab for page->ptl allocation" · 8b2e9b71
      由 Linus Torvalds 提交于 
      This reverts commit ea1e7ed3.

Al points out that while the commit *does* actually create a separate
slab for the page->ptl allocation, that slab is never actually used, and
the code continues to use kmalloc/kfree.

Damien Wyart points out that the original patch did have the conversion
to use kmem_cache_alloc/free, so it got lost somewhere on its way to me.

Revert the half-arsed attempt that didn't do anything.  If we really do
want the special slab (remember: this is all relevant just for debug
builds, so it's not necessarily all that critical) we might as well redo
the patch fully.
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Kirill A Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8b2e9b71
  17. 20 11月, 2013 7 次提交
  19. 19 11月, 2013 1 次提交
  21. 16 11月, 2013 4 次提交
  23. 15 11月, 2013 15 次提交