We should trace the allocated address instead of page struct.

Fixes: 27c87486 ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: NChen Lin <chen.lin5@zte.com.cn>
Reviewed-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

area_cache_get() is used to distribute cache->area and set cache->id,
 and if cache->id is not 0 and cache->area->kref refcount is 0, it will
 release the cache->area by nfp_cpp_area_release(). area_cache_get()
 set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().

But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is
 is already set but the refcount is not increased as expected. At this
 time, calling the nfp_cpp_area_release() will cause use-after-free.

To avoid the use-after-free, set cache->id after area_init() and
 nfp_cpp_area_acquire() complete successfully.

Note: This vulnerability is triggerable by providing emulated device
 equipped with specified configuration.

 BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
  Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1

 Call Trace:
  <TASK>
 nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884)

 Allocated by task 1:
 nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303)
 nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802)
 nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230)
 nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215)
 nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744)

 Freed by task 1:
 kfree (mm/slub.c:4562)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873)
 nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973)
 nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48)
Signed-off-by: NJialiang Wang <wangjialiang0806@163.com>
Reviewed-by: NYinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: NSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Drop devl_lock() / devl_unlock() from ports creation and removal flows
since the devlink instance lock is now taken by mlxsw_core.

Fixes: 72a4c8c9 ("mlxsw: convert driver to use unlocked devlink API during init/fini")
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/f4afce5ab0318617f3866b85274be52542d59b32.1660211614.git.petrm@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Currently, tls_device_down synchronizes with tls_device_resync_rx using
RCU, however, the pointer to netdev is stored using WRITE_ONCE and
loaded using READ_ONCE.

Although such approach is technically correct (rcu_dereference is
essentially a READ_ONCE, and rcu_assign_pointer uses WRITE_ONCE to store
NULL), using special RCU helpers for pointers is more valid, as it
includes additional checks and might change the implementation
transparently to the callers.

Mark the netdev pointer as __rcu and use the correct RCU helpers to
access it. For non-concurrent access pass the right conditions that
guarantee safe access (locks taken, refcount value). Also use the
correct helper in mlx5e, where even READ_ONCE was missing.

The transition to RCU exposes existing issues, fixed by this commit:

1. bond_tls_device_xmit could read netdev twice, and it could become
NULL the second time, after the NULL check passed.

2. Drivers shouldn't stop processing the last packet if tls_device_down
just set netdev to NULL, before tls_dev_del was called. This prevents a
possible packet drop when transitioning to the fallback software mode.

Fixes: 89df6a81 ("net/bonding: Implement TLS TX device offload")
Fixes: c55dcdd4 ("net/tls: Fix use-after-free after the TLS device goes down and up")
Signed-off-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220810081602.1435800-1-maximmi@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.

Fixes: ce99f6b9 ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels")
Acked-by: NGuillaume Nault <gnault@redhat.com>
Signed-off-by: NMatthias May <matthias.may@westermo.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The final update statement of the for loop exceeds the array range, the
dereference of self->aq_vec[i] is not checked and then leads to the
index out of range error.
Also fixed this kind of coding style in other for loop.

[   97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48
[   97.937607] index 8 is out of range for type 'aq_vec_s *[8]'
[   97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2
[   97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022
[   97.937611] Workqueue: events_unbound async_run_entry_fn
[   97.937616] Call Trace:
[   97.937617]  <TASK>
[   97.937619]  dump_stack_lvl+0x49/0x63
[   97.937624]  dump_stack+0x10/0x16
[   97.937626]  ubsan_epilogue+0x9/0x3f
[   97.937627]  __ubsan_handle_out_of_bounds.cold+0x44/0x49
[   97.937629]  ? __scm_send+0x348/0x440
[   97.937632]  ? aq_vec_stop+0x72/0x80 [atlantic]
[   97.937639]  aq_nic_stop+0x1b6/0x1c0 [atlantic]
[   97.937644]  aq_suspend_common+0x88/0x90 [atlantic]
[   97.937648]  aq_pm_suspend_poweroff+0xe/0x20 [atlantic]
[   97.937653]  pci_pm_suspend+0x7e/0x1a0
[   97.937655]  ? pci_pm_suspend_noirq+0x2b0/0x2b0
[   97.937657]  dpm_run_callback+0x54/0x190
[   97.937660]  __device_suspend+0x14c/0x4d0
[   97.937661]  async_suspend+0x23/0x70
[   97.937663]  async_run_entry_fn+0x33/0x120
[   97.937664]  process_one_work+0x21f/0x3f0
[   97.937666]  worker_thread+0x4a/0x3c0
[   97.937668]  ? process_one_work+0x3f0/0x3f0
[   97.937669]  kthread+0xf0/0x120
[   97.937671]  ? kthread_complete_and_exit+0x20/0x20
[   97.937672]  ret_from_fork+0x22/0x30
[   97.937676]  </TASK>

v2. fixed "warning: variable 'aq_vec' set but not used"

v3. simplified a for loop

Fixes: 97bde5c4 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: NChia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: NSudarsana Reddy Kalluru <skalluru@marvell.com>
Link: https://lore.kernel.org/r/20220808081845.42005-1-acelan.kao@canonical.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

On one of our machines we got:

kernel BUG at lib/dynamic_queue_limits.c:27!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G        W  O    4.14.275-rt132 #1
Hardware name: BRCM XGS iProc
task: ee3415c0 task.stack: ee32a000
PC is at dql_completed+0x168/0x178
LR is at bgmac_poll+0x18c/0x6d8
pc : [<c03b9430>]    lr : [<c04b5a18>]    psr: 800a0313
sp : ee32be14  ip : 000005ea  fp : 00000bd4
r10: ee558500  r9 : c0116298  r8 : 00000002
r7 : 00000000  r6 : ef128810  r5 : 01993267  r4 : 01993851
r3 : ee558000  r2 : 000070e1  r1 : 00000bd4  r0 : ee52c180
Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 12c5387d  Table: 8e88c04a  DAC: 00000051
Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210)
Stack: (0xee32be14 to 0xee32c000)
be00:                                              ee558520 ee52c100 ef128810
be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040
be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040
be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a
be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98
bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8
bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000
bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520
bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900
bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c
bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28
bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70
bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000
bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8)
[<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494)
[<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c)
[<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98)
[<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98)
[<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0)
[<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158)
[<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24)
Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7)

The issue seems similar to commit 90b3b339 ("net: hisilicon: Fix a BUG
trigered by wrong bytes_compl") and potentially introduced by commit
b38c83dd ("bgmac: simplify tx ring index handling").

If there is an RX interrupt between setting ring->end
and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free()
can miscalculate the queue size while called from bgmac_poll().

The machine which triggered the BUG runs a v4.14 RT kernel - but the issue
seems present in mainline too.

Fixes: b38c83dd ("bgmac: simplify tx ring index handling")
Signed-off-by: NSandor Bodo-Merle <sbodomerle@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220808173939.193804-1-sbodomerle@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write
index like tsnep_tx_map(). This is different to the normal operation.
Thus, add an additional parameter to tsnep_tx_unmap() to enable start at
different positions for successful TX and failed TX.

Fixes: 403f69bb ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: NGerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Kernel test robot found the following warning:

drivers/net/ethernet/engleder/tsnep_main.c:1254:34: warning:
'tsnep_of_match' defined but not used [-Wunused-const-variable=]

of_match_ptr() compiles into NULL if CONFIG_OF is disabled.
tsnep_of_match exists always so use of of_match_ptr() is useless.
Fix warning by dropping of_match_ptr().
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NGerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Avoid the PHY library call unnecessarily into the suspend/resume functions by
setting phydev->mac_managed_pm to true. The GENET driver essentially does
exactly what mdio_bus_phy_resume() does by calling phy_init_hw() plus
phy_resume().

Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220804173605.1266574-1-f.fainelli@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The text was copy&pasted from Intel, adjust it to say Wangxun.
Reported-by: NIngo Saitz <ingo@hannover.ccc.de>
Fixes: 3ce7547e ("net: txgbe: Add build support for txgbe")
Link: https://lore.kernel.org/r/20220804182641.1442000-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
selects the TL3 or TL2 scheduling level as the one used for link/channel
selection and backpressure. For each scheduling queue at the selected
level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows
the TL3/TL2 queue to schedule packets to a specified RPM or LBK link
and channel.

There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is
configured for TL2 queue in some cases. As a result packets will not
transmit on that link/channel. This patch fixes the issue by configuring
the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the
NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value.

Fixes: caa2da34 ("octeontx2-pf: Initialize and config queues")
Signed-off-by: NNaveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: NSunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Given a field with its location/offset in input packet,
the key checking logic verifies whether extracting the
field can be supported or not based on the mkex profile
loaded in hardware. This logic is wrong wrt source mac
and this patch fixes that.

Fixes: 9b179a96 ("octeontx2-af: Generate key field bit mask from KEX profile")
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The teardown sequence in FLR handler returns if no NIX LF
is attached to PF/VF because it indicates that graceful
shutdown of resources already happened. But there is a
chance of all allocated MCAM entries not being freed by
PF/VF. Hence free mcam entries even in case of detached LF.

Fixes: c554f9c1 ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR")
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The packet parser profile supplied as firmware may not
be present all the time and default profile is used mostly.
Hence suppress firmware loading warning from kernel due to
absence of firmware in kernel image.

Fixes: 3a724415 ("octeontx2-af: add support for custom KPU entries")
Signed-off-by: NHarman Kalra <hkalra@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some
silicon revisions. Mistakenly this fixup was only applied to the default
MKEX profile while it should also be applied to any loaded profile.

Fixes: 1c1935c9 ("octeontx2-af: Add NIX1 interfaces to NPC")
Signed-off-by: NStanislaw Kardach <skardach@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

bnxt_ethtool.h is included twice in bnxt_devlink.c,
remove one of them.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1817Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220804003722.54088-1-yang.lee@linux.alibaba.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The port flag isn't set to `NFP_PORT_CHANGED` when using
`ethtool -m DEVNAME` before, so the port state (e.g. interface)
cannot be updated. Therefore, it caused that `ethtool -m DEVNAME`
sometimes cannot read the correct information.

E.g. `ethtool -m DEVNAME` cannot work when load driver before plug
in optical module, as the port interface is still NONE without port
update.

Now update the port state before sending info to NIC to ensure that
port interface is correct (latest state).

Fixes: 61f7c6f4 ("nfp: implement ethtool get module EEPROM")
Reviewed-by: NLouis Peens <louis.peens@corigine.com>
Signed-off-by: NYu Xiao <yu.xiao@corigine.com>
Signed-off-by: NSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Striding RQ uses MTT page mapping, where each page corresponds to an XSK
frame. MTT pages have alignment requirements, and XSK frames don't have
any alignment guarantees in the unaligned mode. Frames with improper
alignment must be discarded, otherwise the packet data will be written
at a wrong address.

Fixes: 282c0c79 ("net/mlx5e: Allow XSK frames smaller than a page")
Signed-off-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com>
Reviewed-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20220729121356.3990867-1-maximmi@nvidia.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

Fixes the coverity warning 'EVALUATION_ORDER' violation. port is written
twice with the same value.
Signed-off-by: NSebin Sebastian <mailmesebin00@gmail.com>
Link: https://lore.kernel.org/r/20220801040731.34741-1-mailmesebin00@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

PTP messages like SYNC, FOLLOW_UP, DELAY_REQ are of size 58 bytes.
Using a minimum packet length as 64 makes NIX to pad 6 bytes of
zeroes while transmission. This is causing latest ptp4l application to
emit errors since length in PTP header and received packet are not same.
Padding upto 3 bytes is fine but more than that makes ptp4l to assume
the pad bytes as a TLV. Hence reduce the size to 60 from 64.
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NNaveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: NSunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220729092457.3850-1-naveenm@marvell.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

A pci_enable_pcie_error_reporting() should be balanced by a corresponding
pci_disable_pcie_error_reporting() call in the error handling path, as
already done in the remove function.

Fixes: 3ce7547e ("net: txgbe: Add build support for txgbe")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NJiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/082003d00be1f05578c9c6434272ceb314609b8e.1659285240.git.christophe.jaillet@wanadoo.frSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The prototype of input features of ionic_set_nic_features() is
netdev_features_t, but the vlan_flags is using the private
definition of ionic drivers. It should use the variable
ctx.cmd.lif_setattr.features, rather than features to check
the vlan flags. So fixes it.

Fixes: beead698 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Acked-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

vsi->current_netdev_flags is used store the current net device
flags, not the active netdevice features. So it should use
vsi->netdev->featurs, rather than vsi->current_netdev_flags
to check NETIF_F_HW_VLAN_CTAG_FILTER.

Fixes: 1babaf77 ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Acked-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Currently nfp driver will reject to offload tunnel key action without
tunnel key ID which means tunnel ID is 0. But it is a normal case for tc
flower since user can setup a tunnel with tunnel ID is 0.

So we need to support this case to accept tunnel key action without
tunnel key ID.
Signed-off-by: NBaowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: NLouis Peens <louis.peens@corigine.com>
Signed-off-by: NSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220729091641.354748-1-simon.horman@corigine.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

By now all the functions fun_xdp_tx() calls are shared with the skb path
and thus are fragment-capable. Update fun_xdp_tx(), that up to now has
been passing just one buffer, to check for fragments and call
accordingly.  This makes XDP_TX and ndo_xdp_xmit fragment-capable.
Signed-off-by: NDimitris Michailidis <dmichail@fungible.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of passing an skb to the mapping function pass an
skb_shared_info plus an additional address/length pair. This makes it
usable for both skbs and XDP. Call it from the XDP path and adjust the
skb path.
Signed-off-by: NDimitris Michailidis <dmichail@fungible.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extract the Tx gather list writing code that skbs use into a utility
function and use it also for XDP.
Signed-off-by: NDimitris Michailidis <dmichail@fungible.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current XDP unmapping is a subset of its skb analog, dealing with
only one buffer. In preparation for multi-frag XDP rename the skb
function and use it also for XDP. The XDP version is removed.
Signed-off-by: NDimitris Michailidis <dmichail@fungible.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert reload command to behave the same way as the rest of the
commands and let if be called with devlink->lock held. Remove the
temporary devl_lock taking from drivers. As the DEVLINK_NL_FLAG_NO_LOCK
flag is no longer used, remove it alongside.
Signed-off-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's not truly a ring, but the maximum length of the list of queued RX
 SKBs is analogous to an RX ring size, so use that API to configure it.
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Representors do not want to be subject to the PF's Ethernet address
 filters, since traffic from VFs will typically have a destination
 either elsewhere on the link segment or on an overlay network.
So, create a dynamic m-port with promiscuous and all-multicast
 filters, and set it as the egress port of representor default rules.
 Since the m-port is an alias of the calling PF's own m-port, traffic
 will still be delivered to the PF's RXQs, but it will be subject to
 the VNRX filter rules installed on the dynamic m-port (specified by
 the v-port ID field of the filter spec).
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

We need to be able to drop the efx->filter_sem in ef100_filter_table_up()
 so that we can call functions that insert filters (and thus take that
 rwsem for read), which means the efx->type->filter_table_probe method
 needs to be responsible for taking the lock in the first place.
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Default rules are low-priority switching rules which the hardware uses
 in the absence of higher-priority rules.  Each representor requires a
 corresponding rule matching traffic from its representee VF and
 delivering to the PF (where a check on INGRESS_MPORT in
 __ef100_rx_packet() will direct it to the representor).  No rule is
 required in the reverse direction, because representor TX uses a TX
 override descriptor to bypass the MAE and deliver directly to the VF.
Since inserting any rule into the MAE disables the firmware's own
 default rules, also insert a pair of rules to connect the PF to the
 physical network port and vice-versa.
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

If the source m-port of a packet in __ef100_rx_packet() is a VF,
 hand off the packet to the corresponding representor with
 efx_ef100_rep_rx_packet().
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

If not, for now drop them and warn.  A subsequent patch will look up
 the source m-port to try and find a representor to deliver them to.
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Traffic delivered to the (MAE admin) PF could be from either the wire
 or a VF.  The INGRESS_MPORT field of the RX prefix distinguishes these;
 base_mport is the value this field will have for traffic from the wire
 (which should be delivered to the PF's netdevice, not a representor).
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Representor RX uses a NAPI context driven by a 'fake interrupt': when
 the parent PF receives a packet destined for the representor, it adds
 it to an SKB list (efv->rx_list), and schedules NAPI if the 'fake
 interrupt' is primed.  The NAPI poll then pulls packets off this list
 and feeds them to the stack with netif_receive_skb_list().
This scheme allows us to decouple representor RX from the parent PF's
 RX fast-path.
This patch implements the 'top half', which builds an SKB, copies data
 into it from the RX buffer (which can then be released), adds it to
 the queue and fires the 'fake interrupt' if necessary.
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This patch adds the 'bottom half' napi->poll routine for representor RX.
See the next patch (with the top half) for an explanation of the 'fake
 interrupt' scheme used to drive this NAPI context.
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Implement .ndo_get_stats64() method to read values out of struct
 efx_rep_sw_stats.
Signed-off-by: NEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>