It is hard to understand why the refcnt is increased when it isn't done
near the actual place the new reference is used. So using kref_get right
before the place which requires the reference and in the same function
helps to avoid accidental problems caused by incorrect reference counting.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

It is hard to understand why the refcnt is increased when it isn't done
near the actual place the new reference is used. So using kref_get right
before the place which requires the reference and in the same function
helps to avoid accidental problems caused by incorrect reference counting.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

It is hard to understand why the refcnt is increased when it isn't done
near the actual place the new reference is used. So using kref_get right
before the place which requires the reference and in the same function
helps to avoid accidental problems caused by incorrect reference counting.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

It is hard to understand why the refcnt is increased when it isn't done
near the actual place the new reference is used. So using kref_get right
before the place which requires the reference and in the same function
helps to avoid accidental problems caused by incorrect reference counting.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

It is hard to understand why the refcnt is increased when it isn't done
near the actual place the new reference is used. So using kref_get right
before the place which requires the reference and in the same function
helps to avoid accidental problems caused by incorrect reference counting.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

It is hard to understand why the refcnt is increased when it isn't done
near the actual place the new reference is used. So using kref_get right
before the place which requires the reference and in the same function
helps to avoid accidental problems caused by incorrect reference counting.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

It is hard to understand why the refcnt is increased when it isn't done
near the actual place the new reference is used. So using kref_get right
before the place which requires the reference and in the same function
helps to avoid accidental problems caused by incorrect reference counting.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Set the netnsof flag on the family structure, indicating it can
be used with different network name spaces.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Dump the list of bridge loop avoidance backbones via the netlink socket.
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

The bridge loop avoidange is the main information for the debugging of of
bridge loop detection problems. It is therefore necessary when comparing
the bla claim tables.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Dump the list of bridge loop avoidance claims via the netlink socket.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: add policy for attributes, fix includes, fix
soft_iface reference leak]
Signed-off-by: NSven Eckelmann <sven.eckelmann@open-mesh.com>
[sw@simonwunderlich.de: fix kerneldoc, fix error reporting]
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Dump the list of gateways via the netlink socket.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: integrate in batadv_algo_ops]
Signed-off-by: NSven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Add BATADV_CMD_GET_GATEWAYS commands, using handlers bat_gw_dump in
batadv_algo_ops. Will always return -EOPNOTSUPP for now, as no
implementations exist yet.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Dump the algo V originators and neighbours.
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven@narfation.org: Fix includes, fix algo_ops integration]
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: Fix function parameter alignments,
add policy for attributes, fix includes, fix algo_ops integration]
Signed-off-by: NSven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Add BATADV_CMD_GET_ORIGINATORS and BATADV_CMD_GET_NEIGHBORS commands,
using handlers bat_orig_dump and bat_neigh_dump in batadv_algo_ops. Will
always return -EOPNOTSUPP for now, as no implementations exist yet.
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven@narfation.org: Rewrite based on new algo_ops structures]
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

The TTVN is the main information for the debugging of translation table
problems. It is therefore necessary when comparing the global translation
tables.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

This adds the commands BATADV_CMD_GET_TRANSTABLE_LOCAL and
BATADV_CMD_GET_TRANSTABLE_GLOBAL, which correspond to the transtable_local
and transtable_global debugfs files.

The batadv_tt_client_flags enum is moved to the UAPI to expose it as part
of the netlink API.
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: add policy for attributes, fix includes]
Signed-off-by: NSven Eckelmann <sven.eckelmann@open-mesh.com>
[sw@simonwunderlich.de: fix VID attributes content]
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

BATADV_CMD_GET_HARDIFS will return the list of hardifs (including index,
name and MAC address) of all hardifs for a given softif.
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: Reduce the number of changes to
BATADV_CMD_GET_HARDIFS, add policy for attributes]
Signed-off-by: NSven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

BATADV_CMD_GET_ROUTING_ALGOS is used to get the list of supported routing
algorithms.
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: Reduce the number of changes to
BATADV_CMD_GET_ROUTING_ALGOS, fix includes]
Signed-off-by: NSven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Debugfs is not netns aware. It thus has problems when the same
interface name exists in multiple network name spaces.

Work around this by not creating entries for interfaces in name spaces
other than the default name space. This means meshes in network
namespaces cannot be managed via debugfs, but there will soon be a
netlink interface which is netns aware.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

batman-adv tries to prevent the user from placing a batX soft
interface into another batman mesh as a hard interface. It does this
by walking up the devices list of parents and ensures they are all
none batX interfaces. iflink can point to an interface in a different
namespace, so also retrieve the parents name space when finding the
parent and use it when doing the comparison.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
[sven@narfation.org: Fix alignments, simplify parent netns retrieval]
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

The debug messages of _batadv_update_route were printed before the actual
route change is done. At this point it is not really known which
curr_router will be replaced. Thus the messages could print the wrong
operation.

Printing the debug messages after the operation was done avoids this
problem.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

This silences the following coccinelle warning:

"WARNING: sum of probable bitmasks, consider |"
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

The function batadv_send_skb_unicast is not acquiring a reference for an
orig_node nor removing it from any datastructure. It still reduces the
reference counter for an object which is still in the hands of the caller.

This is confusing and can lead in the future to problems in the reference
handling of the caller function.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Acked-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

The translation table (global, local) is usually the part of batman-adv
which has the most dynamical allocated objects. Most of them
(tt_local_entry, tt_global_entry, tt_orig_list_entry, tt_change_node,
tt_req_node, tt_roam_node) are equally sized. So it makes sense to have
them allocated from a kmem_cache for each type.

This approach allowed a small wireless router (TP-Link TL-841NDv8; SLUB
allocator) to store 34% more translation table entries compared to the
current implementation.

[1] https://open-mesh.org/projects/batman-adv/wiki/Kmalloc-kmem-cache-testsReported-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

This patch abstracts the forward packet creation into the new function
batadv_forw_packet_alloc().

The queue counting and interface reference counters are now handled
internally within batadv_forw_packet_alloc() and its
batadv_forw_packet_free() counterpart. This should reduce the risk of
having reference/queue counting bugs again and should increase
code readibility.
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

net/batman-adv/bridge_loop_avoidance.c:1105:9-10: WARNING: return of 0/1 in function 'batadv_bla_process_claim' with return type bool

 Return statements in functions returning bool should use
 true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

The difference between tq1 and tq2 are calculated the same way in two
separate functions.

This patch moves the common code to a separate function
'batadv_iv_ogm_neigh_diff' which handles everything necessary. The other
two functions can then handle errors and use the difference directly.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
[sven@narfation.org: rebased on current version, initialize return variable
in batadv_iv_ogm_neigh_diff, add kerneldoc, convert to bool return type]
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Now that the GW-mode code is algorithm specific, batman-adv expects the
routing algorithm to implement some APIs to make it work.

However, such APIs are not mandatory, therefore we might have algorithms
not providing them. In this case all the sysfs knobs related to GW-mode
should be deactivated to make sure that settings injected by the user
for this feature are rejected.
Signed-off-by: NAntonio Quartulli <a@unstable.cc>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Since the GW selection logic has been made routing protocol specific
it is now possible for B.A.T.M.A.N V to have its own mechanism by
providing the API implementation.

Implement the GW specific API in the B.A.T.M.A.N. V protocol in
order to provide a working GW selection mechanism.
Signed-off-by: NAntonio Quartulli <a@unstable.cc>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Each routing protocol may have its own specific logic about
gateway election which is potentially based on the metric being
used.

Create two GW specific API functions and move the current election
logic in the B.A.T.M.A.N. IV specific code.
Signed-off-by: NAntonio Quartulli <a@unstable.cc>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

The B.A.T.M.A.N. V algorithm uses a different metric compared to its
predecessor and for this reason the logic used to compute the best
Gateway is also changed. This means that the GW selection class
fed to this logic has a semantics that depends on the algorithm being
used.

Make the parsing and printing routine of the GW selection class
routing algorithm specific. Each algorithm can now parse (and print)
this value independently.

If no API is provided by any algorithm, the default is to use the
current mechanism of considering such value like an integer between
1 and 255.
Signed-off-by: NAntonio Quartulli <a@unstable.cc>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Fixes: ef0a937f ("batman-adv: consider outgoing interface in OGM sending")
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

The kobject_put is only removing the sysfs entry and corresponding entries
when its reference counter becomes zero. This tends to lead to collisions
when a device is moved between two different network namespaces because
some of the sysfs files have to be removed first and then added again to
the already moved sysfs entry.

    WARNING: CPU: 0 PID: 290 at lib/kobject.c:240 kobject_add_internal+0x5ec/0x8a0
    kobject_add_internal failed for batman_adv with -EEXIST, don't try to register things with the same name in the same directory.

But the caller of kobject_put can already remove the sysfs entry before it
does the kobject_put. This removal is done even when the reference counter
is not yet zero and thus avoids the problem.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

Postponing the removal of the interface breaks the expected behavior of
NETDEV_UNREGISTER and NETDEV_PRE_TYPE_CHANGE. This is especially
problematic when an interface is removed and added in quick succession.

This reverts commit 5bc44dc8 ("batman-adv: postpone sysfs removal when
unregistering").
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

The legacy sysfs interface to modify interfaces belonging to batman-adv
is run inside a region holding s_lock. And to add a net_device, it has
to also get the rtnl_lock. This is exactly the other way around than in
other virtual net_devices and conflicts with netdevice notifier which
executes inside rtnl_lock.

The inverted lock situation is currently solved by executing the removal
of netdevices via workqueue. The workqueue isn't executed inside
rtnl_lock and thus can independently get the s_lock and the rtnl_lock.

But this workaround fails when the netdevice notifier creates events in
quick succession and the earlier triggered removal of a net_device isn't
processed in the workqueue before the adding of the new netdevice (with
same name) event is issued.

Instead the legacy sysfs interface store events have to be enqueued in
a workqueue to loose the s_lock. The worker is then free to get the
required locks and the deadlock is avoided.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

The standard kernel API to add new virtual interfaces and attach other
interfaces to it is rtnl-link. batman-adv supports it since v3.10. This
functionality should be used instead of the legacy batman-adv-only sysfs
interface.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

The batman-adv module can automatically be loaded when operations over the
rtnl link are triggered. This requires only the correct rtnl link name in
the module header.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>