At least Maxtor OneTouch III require a "start stop unit" command after auto
spin-down before the next access can proceed.  This patch activates the
responsible code in scsi_mod for all Maxtor SBP-2 disks.
https://bugzilla.novell.com/show_bug.cgi?id=183011

Maybe that should be done for all SBP-2 disks, but better be cautious.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While helping someone to submit a patch to the stable branch, I noticed
that the stable branch is not listed in the MAINTAINERS file.  This was
after I went there to look for the email addresses for the stable branch
list (stable@kernel.org).

This patch adds the stable branch to the maintainers file so that people
can find where to send patches when they have a fix for the stable team.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up proc file removal in sq module for superh arch.  currently on a
failed module load or on module unload a proc file is left registered which
can cause a random memory execution or oopses if read after unload.  This
patch cleans up that deregistration.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* MODE_MASK is unused in eicon driver.
* Conflicts with a ptrace stuff on arm.

drivers/isdn/hardware/eicon/divasync.h:259:1: warning: "MODE_MASK" redefined
include2/asm/ptrace.h:48:1: warning: this is the location of the previous definition
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NKarsten Keil <kkeil@suse.de>
Acked-by: NArmin Schindler <armin@melware.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A set of tty line discipline cleanup patches were introduced before the
dawn of time, in kernel version 2.4.21.  This patch performs that cleanup
for the hvsi driver.

The hvsi driver is used only on IBM pSeries PowerPC boxes.  The driver was
originally written by Hollis Blanchard, who has delegated maintainership to
me.  So this my first and maybe only patch in this official new role,
because this driver is otherwise bug-free :-)

Alan: "Actually its also a bug fix, tty->ldisc should be locked by refcounting
and the helpers do this for you."
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Under certain rare circumstances, it appears that there can be be a
NULL-pointer deref when a user fiddles with terminal emeulation programs while
outpu is being sent to the console.  This patch checks for and avoids a
NULL-pointer deref.
Signed-off-by: NHollis Blanchard <hollisbl@austin.ibm.com>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
Acked-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we don't find the item we are lookng for, we allocate a new one, and
then grab the lock again and search to see if it has been added while we
did the alloc.  If it had been added we need to 'cache_put' the newly
created item that we are never going to use.  But as it hasn't been
initialised properly, putting it can cause an oops.

So move the ->init call earlier to that it will always be fully initilised
if we have to put it.

Thanks to Philipp Matthias Hahn <pmhahn@svs.Informatik.Uni-Oldenburg.de>
for reporting the problem.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removes many, many "declared inside parameter list" warnings on parisc.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The POSIX_FADV_NOREUSE hint means "the application will use this range of the
file a single time".  It seems to be intended that the implementation will use
this hint to perform drop-behind of that part of the file when the application
gets around to reading or writing it.

However for reasons which aren't obvious (or sane?) I mapped
POSIX_FADV_NOREUSE onto POSIX_FADV_WILLNEED.  ie: it does readahead.

That's daft.  So for now, make POSIX_FADV_NOREUSE a no-op.

This is a non-back-compatible change.  If someone was using POSIX_FADV_NOREUSE
to perform readahead, they lose.  The likelihood is low.

If/when we later implement POSIX_FADV_NOREUSE things will get interesting - to
do it fully we'll need to maintain file offset/length ranges and peform all
sorts of complex tricks, and managing the lifetime of those ranges' data
structures will be interesting..

A sensible implementation would probably ignore the file range and would
simply mark the entire file as needing some form of drop-behind treatment.

Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- fix up the start up sequence.

This new sequence allow you to correctly enable the LCD controller
even if the bootloader has already did it.

- fix up a wrong indentation issue.
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix "info->var.rotate" data settings.

This info should be deduced directly from "fbdev->panel->control_base"
defined into au1100fb.h.
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reported by: Dave Jones

Whilst printk'ing to both console and serial console, I got this...
(2.6.18rc1)

BUG: sleeping function called from invalid context at kernel/sched.c:4438
in_atomic():0, irqs_disabled():1

Call Trace:
 [<ffffffff80271db8>] show_trace+0xaa/0x23d
 [<ffffffff80271f60>] dump_stack+0x15/0x17
 [<ffffffff8020b9f8>] __might_sleep+0xb2/0xb4
 [<ffffffff8029232e>] __cond_resched+0x15/0x55
 [<ffffffff80267eb8>] cond_resched+0x3b/0x42
 [<ffffffff80268c64>] console_conditional_schedule+0x12/0x14
 [<ffffffff80368159>] fbcon_redraw+0xf6/0x160
 [<ffffffff80369c58>] fbcon_scroll+0x5d9/0xb52
 [<ffffffff803a43c4>] scrup+0x6b/0xd6
 [<ffffffff803a4453>] lf+0x24/0x44
 [<ffffffff803a7ff8>] vt_console_print+0x166/0x23d
 [<ffffffff80295528>] __call_console_drivers+0x65/0x76
 [<ffffffff80295597>] _call_console_drivers+0x5e/0x62
 [<ffffffff80217e3f>] release_console_sem+0x14b/0x232
 [<ffffffff8036acd6>] fb_flashcursor+0x279/0x2a6
 [<ffffffff80251e3f>] run_workqueue+0xa8/0xfb
 [<ffffffff8024e5e0>] worker_thread+0xef/0x122
 [<ffffffff8023660f>] kthread+0x100/0x136
 [<ffffffff8026419e>] child_rip+0x8/0x12

This can occur when release_console_sem() is called but the log
buffer still has contents that need to be flushed. The console drivers
are called while the console_may_schedule flag is still true. The
might_sleep() is triggered when fbcon calls console_conditional_schedule().

Fix by setting console_may_schedule to zero earlier, before the call to the
console drivers.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The per cpu variables are used incorrectly in vmstat.h.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Acked-by: NSteve Fox <drfickle@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When delivering PTRACE_EVENT_VFORK_DONE, provide pid of the child process
when tracer calls ptrace(PTRACE_GETEVENTMSG).  This is already
(accidentally) available when the tracer is tracing VFORK in addition to
VFORK_DONE.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Cc: Daniel Jacobowitz <dan@debian.org>
Cc: Albert Cahalan <acahalan@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A recent patch that allowed linear arrays to be reconfigured on-line
allowed in a bug which results in divide by zero - not all
mddev->array_size were converted to conf->array_size.

This patch finished the conversion and fixed the bug.

The offending patch was commit 7c7546cc.

Thanks to Simon Kirby <sim@netnation.com> for the bug report.

Cc: Simon Kirby <sim@netnation.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Seems like the omap-rng driver in the main tree predates the switch from
<asm/hardware/clock.h> to <linux/clk.h> ...  now it builds OK.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixes an i_mutex-inside-i_mutex lockdep nasty.
Signed-off-by: NAlexander Zarochentsev <zam@namesys.com>
Cc: <reiserfs-dev@namesys.com>
Cc: Hans Reiser <reiser@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Current Linus tree crashes in aty128_set_lcd_enable() because par->pdev
is NULL. This happens since at least a week. Call trace is:

aty128_set_lcd_enable
aty128fb_set_par
fbcon_init
visual_init
take_over_console
fbcon_takeover
notifier_call_chain
blocking_notifier_call_chain
register_framebuffer
aty128fb_probe
pci_device_probe
bus_for_each_dev
driver_attach
bus_add_driver
driver_register
__pci_register_driver
aty128fb_init
init
kernel_thread

- info->fix was assigned twice.

- par->vram_size is assigned in aty128_probe(), no need to redo it again
  in aty128_init()

- register_framebuffer() uses uninitialized struct members, move it past
  par->pdev assignment and past aty128_bl_init().
Signed-off-by: NOlaf Hering <olh@suse.de>
Acked-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ufs_get_locked_page is called twice in ufs code, one time in ufs_truncate
path(we allocated last block), and another time when fragments are
reallocated.  In ideal world in the second case on allocation/free block
layer we should not know that things like `truncate' exists, but now with
such crutch like ufs_get_locked_page we can (or should?) skip truncated
pages.
Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As discussed earlier:
http://lkml.org/lkml/2006/6/28/136
this patch fixes such issue:

`ufs_get_locked_page' takes page from cache
after that `vmtruncate' takes page and deletes it from cache
`ufs_get_locked_page' locks page, and reports about EIO error.

Also because of find_lock_page always return valid page or NULL, we have no
need to check it if page not NULL.
Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a barrier() in futex unqueue_me to avoid aliasing of two
pointers.

On my s390x system I saw the following oops:

Unable to handle kernel pointer dereference at virtual kernel address
0000000000000000
Oops: 0004 [#1]
CPU:    0    Not tainted
Process mytool (pid: 13613, task: 000000003ecb6ac0, ksp: 00000000366bdbd8)
Krnl PSW : 0704d00180000000 00000000003c9ac2 (_spin_lock+0xe/0x30)
Krnl GPRS: 00000000ffffffff 000000003ecb6ac0 0000000000000000 0700000000000000
           0000000000000000 0000000000000000 000001fe00002028 00000000000c091f
           000001fe00002054 000001fe00002054 0000000000000000 00000000366bddc0
           00000000005ef8c0 00000000003d00e8 0000000000144f91 00000000366bdcb8
Krnl Code: ba 4e 20 00 12 44 b9 16 00 3e a7 84 00 08 e3 e0 f0 88 00 04
Call Trace:
([<0000000000144f90>] unqueue_me+0x40/0xe4)
 [<0000000000145a0c>] do_futex+0x33c/0xc40
 [<000000000014643e>] sys_futex+0x12e/0x144
 [<000000000010bb00>] sysc_noemu+0x10/0x16
 [<000002000003741c>] 0x2000003741c

The code in question is:

static int unqueue_me(struct futex_q *q)
{
        int ret = 0;
        spinlock_t *lock_ptr;

        /* In the common case we don't take the spinlock, which is nice. */
 retry:
        lock_ptr = q->lock_ptr;
        if (lock_ptr != 0) {
                spin_lock(lock_ptr);
		/*
                 * q->lock_ptr can change between reading it and
                 * spin_lock(), causing us to take the wrong lock.  This
                 * corrects the race condition.
[...]

and my compiler (gcc 4.1.0) makes the following out of it:

00000000000003c8 <unqueue_me>:
     3c8:       eb bf f0 70 00 24       stmg    %r11,%r15,112(%r15)
     3ce:       c0 d0 00 00 00 00       larl    %r13,3ce <unqueue_me+0x6>
                        3d0: R_390_PC32DBL      .rodata+0x2a
     3d4:       a7 f1 1e 00             tml     %r15,7680
     3d8:       a7 84 00 01             je      3da <unqueue_me+0x12>
     3dc:       b9 04 00 ef             lgr     %r14,%r15
     3e0:       a7 fb ff d0             aghi    %r15,-48
     3e4:       b9 04 00 b2             lgr     %r11,%r2
     3e8:       e3 e0 f0 98 00 24       stg     %r14,152(%r15)
     3ee:       e3 c0 b0 28 00 04       lg      %r12,40(%r11)
		/* write q->lock_ptr in r12 */
     3f4:       b9 02 00 cc             ltgr    %r12,%r12
     3f8:       a7 84 00 4b             je      48e <unqueue_me+0xc6>
		/* if r12 is zero then jump over the code.... */
     3fc:       e3 20 b0 28 00 04       lg      %r2,40(%r11)
		/* write q->lock_ptr in r2 */
     402:       c0 e5 00 00 00 00       brasl   %r14,402 <unqueue_me+0x3a>
                        404: R_390_PC32DBL      _spin_lock+0x2
		/* use r2 as parameter for spin_lock */

So the code becomes more or less:
if (q->lock_ptr != 0) spin_lock(q->lock_ptr)
instead of
if (lock_ptr != 0) spin_lock(lock_ptr)

Which caused the oops from above.
After adding a barrier gcc creates code without this problem:
[...] (the same)
     3ee:       e3 c0 b0 28 00 04       lg      %r12,40(%r11)
     3f4:       b9 02 00 cc             ltgr    %r12,%r12
     3f8:       b9 04 00 2c             lgr     %r2,%r12
     3fc:       a7 84 00 48             je      48c <unqueue_me+0xc4>
     400:       c0 e5 00 00 00 00       brasl   %r14,400 <unqueue_me+0x38>
                        402: R_390_PC32DBL      _spin_lock+0x2

As a general note, this code of unqueue_me seems a bit fishy. The retry logic
of unqueue_me only works if we can guarantee, that the original value of
q->lock_ptr is always a spinlock (Otherwise we overwrite kernel memory). We
know that q->lock_ptr can change. I dont know what happens with the original
spinlock, as I am not an expert with the futex code.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@timesys.com>
Signed-off-by: NChristian Borntraeger <borntrae@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We've confirmed that the debug version of write_lock() can get stuck for long
enough to cause NMI watchdog timeouts and hence a crash.

We don't know why, yet.   Disable it for now.

Also disable the similar read_lock() code.  Just in case.

Thanks to Dave Olson <olson@unixfolk.com> for reporting and testing.
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_PCI=n:

  CC      drivers/edac/edac_mc.o
drivers/edac/edac_mc.c: In function ‘add_mc_to_global_list’:
drivers/edac/edac_mc.c:1362: error: implicit declaration of function ‘to_platform_device’
drivers/edac/edac_mc.c:1362: error: invalid type argument of ‘->’
drivers/edac/edac_mc.c: In function ‘edac_mc_add_mc’:
drivers/edac/edac_mc.c:1467: error: invalid type argument of ‘->’
drivers/edac/edac_mc.c: In function ‘edac_mc_del_mc’:
drivers/edac/edac_mc.c:1504: error: invalid type argument of ‘->’
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It should be possible to suspend, either to RAM or to disk, if there's a
traced process that has just reached a breakpoint.  However, this is a
special case, because its parent process might have been frozen already and
then we are unable to deliver the "freeze" signal to the traced process.
If this happens, it's better to cancel the freezing of the traced process.

Ref. http://bugzilla.kernel.org/show_bug.cgi?id=6787Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] make uncached allocator more node aware

The uncached allocator has a function, uncached_get_new_chunk(), that needs
to be serialized on a per node basis. It also has a global variable,
allocated_granules, which should be defined on a per node basis and protected
by that serialization. Additionally, all error returns from functions called
(like ia64_pal_mc_drain()) should be handled appropriately.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Acked-by: NJes Sorenson <jes@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6:
  SUNRPC: Fix obvious refcounting bugs in rpc_pipefs.
  RPC: Ensure that we disconnect TCP socket when client requests error out
  NLM/lockd: remove b_done
  NFS: make 2 functions static
  NFS: Release dcache_lock in an error path of nfs_path

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Propagate acpi_processor_preregister_performance return value.
  [CPUFREQ] [2/2] demand load governor modules.
  [CPUFREQ] [1/2] add __find_governor helper and clean up some error handling.
  [CPUFREQ] Longhaul - Rename & fix multipliers table
  [CPUFREQ] Longhaul - Fix power state test to do something more useful
  [CPUFREQ] Longhaul - Readd accidentally dropped line
  [CPUFREQ] Make longhaul_walk_callback() static
  [CPUFREQ] X86_GX_SUSPMOD must depend on PCI
  [CPUFREQ] Longhaul - Initialise later.
  [CPUFREQ] Longhaul - Workaround issues with APIC.
  [CPUFREQ] Longhaul - Hook into ACPI C states.
  [CPUFREQ] return error when failing to set minfreq

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] ahci: skip protocol test altogether in spurious interrupt code

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] myri10ge - Fix spurious invokations of the watchdog reset handler
  [PATCH] myri10ge - Write the firmware in 256-bytes chunks
  [PATCH] Stop calling phy_stop_interrupts() twice
  [PATCH] s2io driver bug fixes #2
  [PATCH] s2io driver bug fixes #1
  [PATCH] zd1211rw: Packet filter fix for managed (STA) mode
  [PATCH] zd1211rw: Fixed endianess issue with length info tag detection
  [PATCH] zd1211rw: Remove bogus assert
  [PATCH] zd1211rw: Fix software encryption/decryption
  [PATCH] zd1211rw: Pass more management frame types up to host
  [PATCH] zd1211rw: Fixes radiotap header

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PNP: Add missing casts in printk() arguments
  PCI: docking station: remove dock uevents
  PCI: Unhide the SMBus on Asus PU-DLS
  PCI Hotplug: add acpiphp to MAINTAINERS
  PCI: pci/search: EXPORTs cannot be __devinit
  PCIE: cleanup on probe error
  pcie: fix warnings when CONFIG_PM=n

Skip protocol test altogether in spurious interrupt code. If PIOS is received
when it shouldn't, ahci will raise protocol violation.
Signed-off-by: NUnicorn Chang <uchang@tw.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix spurious invocations of the watchdog reset handler.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When writing the firmware to the NIC, the FIFO is 256-bytes long,
so we use 256-bytes chunks and a read to wait until the previous
write is done.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Prevent phylib from freeing PHY IRQ twice on closing an eth device:
phy_disconnect() first calls phy_stop_interrupts(), then it calls
phy_stop_machine() which in turn calls phy_stop_interrupts() making the
kernel complain on each bootup...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	This patch contains some of the bug fixes and enhancements done to
	s2io driver. Following are the brief description of changes

	1. code cleanup to handle gso modification better
	2. Move repeated code in rx path, to a common function
	   s2io_chk_rx_buffers()
	3. Bug fix in MSI interrupt
	4. clear statistics when card is down
	5. Avoid linked list traversing in lro aggregation.
	6. Use pci_dma_sync_single_for_cpu for buffer0 in case of 2/3
	   buffer mode.
	7. ethtool tso get/set functions to set clear NETIF_F_TSO6
	8. Stop LRO aggregation when we receive ECN notification
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	This patch contains some of the bug fixes and enhancements done to
	s2io driver. Following are the brief description of changes

	1. Introduced macro "S2IO_PARM_INT" for declaring integer load parameter
	2. UDP_RR test failure, memset txdl after Tx completion
	3. PXE boot may leave adapter in unknown state so do reset in probe.
	4. Add Tx completion code in netpoll
	5. In s2io_vpd_read() move array vpd_data[] to pointer, saves stack memory
	6. Fix bug in ethtool online test
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes