- 15 7月, 2008 11 次提交
-
-
由 David S. Miller 提交于
Add netif_addr_{lock,unlock}{,_bh}() helpers. Use them to protect operations that operate on or read the network device unicast and multicast address lists. Also use them in cases where the code simply wants to block calls into the driver's ->set_rx_mode() and ->set_multicast_list() methods. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emmanuel Grumbach 提交于
This patch avoids adding STAs that don't belong to our IBSS ieee80211_bssid_match matches also bcast address so also APs were added Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Multiple issues: - there are no "default" values needed - cw_min/cw_max can be larger than documented - restructure to decrease size - use get_unaligned_le16 Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch makes mac80211 assign proper sequence numbers to QoS-data frames. It also removes the old sequence number code because we noticed that only the driver or hardware can assign sequence numbers to non-QoS-data and especially management frames in a race-free manner because beacons aren't passed through mac80211's TX path. This patch also adds temporary code to the rt2x00 drivers to not break them completely, that code will have to be reworked for proper sequence numbers on beacons. It also moves sequence number assignment down in the TX path so no sequence numbers are assigned to frames that are dropped. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
According to 802.11-2007, we are doing the wrong thing in the sequence number checks when receiving frames. This fixes it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch fixes the check at the entrance to ieee80211_rx_reorder_ampdu. This check has been broken by 'mac80211: rx.c use new helpers'. Letting QoS NULL packet in ieee80211_rx_reorder_ampdu led to packet loss in RX. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch pushes the "netif_running()" and "same type as before" checks down into ieee80211_if_change_type() to centralise the logic instead of duplicating it for cfg80211 and wext. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch revamps the virtual interface handling and makes the code much easier to follow. Fewer functions, better names, less spaghetti code. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Currently, almost every interface type has a 'bss' pointer pointing to BSS information. This BSS information, however, is for a _local_ BSS, not for the BSS we joined, so having it on a STA mode interface makes little sense, but now they have it pointing to the master device, which is an AP mode virtual interface. However, except for some bitrate control data, this pointer is only used in AP/VLAN modes (for power saving stations.) Overall, it is not necessary to even have the master netdev be a valid virtual interface, and it doesn't have to be on the list of interfaces either. This patch changes the master netdev to be special, it now - no longer is on the list of virtual interfaces, which lets me remove a lot of tests for that - no longer has sub_if_data attached, since that isn't used Additionally, this patch changes some vlan/ap mode handling that is related to these 'bss' pointers described above (but in the VLAN case they actually make sense because there they point to the AP they belong to); it also adds some debugging code to IEEE80211_DEV_TO_SUB_IF to validate it is not called on the master netdev any more. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Samuel Ortiz 提交于
This patch implements the power management routines wireless extensions for mac80211. For now we only support switching PS mode between on and off. Signed-off-by: NSamuel Ortiz <sameo@openedhand.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 10 7月, 2008 1 次提交
-
-
由 Mattias Nissler 提交于
This removes the fast_start parameter from the rc_pid parameters information and instead uses the parameter macro when initializing the rc_pid state. Since the parameter is only used on initialization, there is no point of making exporting it via debugfs. This also fixes uninitialized memory references to the fast_start and norm_offset parameters detected by the kmemcheck utility. Thanks to Vegard Nossum for reporting the bug. Signed-off-by: NMattias Nissler <mattias.nissler@gmx.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 7月, 2008 19 次提交
-
-
由 David S. Miller 提交于
Multiple TX queue support is a core networking feature. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Only plain netif_schedule() remains taking a net_device, mostly as a compatability item while we transition the rest of these interfaces. Everything else calls netif_schedule_queue() or __netif_schedule(), both of which take a netdev_queue pointer. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Accomplish this by using local variables. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Now qdisc, qdisc_sleeping, and qdisc_list also live there. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It can be obtained via the netdev_queue. So create a helper routine, qdisc_dev(), to make the transformations nicer looking. Now, qdisc_alloc() now no longer needs a net_device pointer argument. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
A netdev_queue is an entity managed by a qdisc. Currently there is one RX and one TX queue, and a netdev_queue merely contains a backpointer to the net_device. The Qdisc struct is augmented with a netdev_queue pointer as well. Eventually the 'dev' Qdisc member will go away and we will have the resulting hierarchy: net_device --> netdev_queue --> Qdisc Also, qdisc_alloc() and qdisc_create_dflt() now take a netdev_queue pointer argument. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation. Fix a few typos also. Note: Some fields are marked as TBD and need to have their description corrected. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Recalculate the offset pointers in the ccmp calculations rather than in the callers. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes call of ieee80211_bss_info_change_notify from within ieee80211_reset_erp_info. This allows gathering all bss info changes into one call to the driver in the disassociation flow. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Do the check for sufficient skb->len explicitly and pass a pointer to the struct ieee80211_hdr directly to the michael_mic calculation. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
ccmp_special_blocks was only using it to calculate data_len, calculate that directly. Use unaligned helpers rather than masking/shifting. Use symbolic constants for the masked frame_control, and do it directly on a le16 value. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
ETH_ALEN and IEEE80211_QOS_CTL_LEN Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Also remove the WLAN_IS_QOS_DATA inline after removing the last two users. This starts moving away from using rx->fc to using the header frame_control directly. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rami Rosen 提交于
This patch removes MAC80211_DEBUG from /net/mac80211/Kconfig (in MAC80211_DEBUG_COUNTERS config entry), and replaces MAC80211_DEBUG_MENU instead of MAC80211_DEBUG (in MAC80211_VERBOSE_SPECT_MGMT_DEBUG config entry). Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 7月, 2008 7 次提交
-
-
由 Tomas Winkler 提交于
This patch fixes warning unused variable ifsta when compiling without CONFIG_MAC80211_VERBOSE_DEBUG Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes useless tid assignment for management and control frames Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch adds block ack request capability Signed-off-by: NEster Kummer <ester.kummer@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Probe responses shouldn't be encrypted, and mac80211 doesn't set the crypto key accordingly. However it didn't set the IEEE80211_TX_CTL_DO_NOT_ENCRYPT flag which means drivers could make an attempt to encrypt it, and causing a NULL pointer dereference when accessing the provided hw_key field. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vladimir Koutny 提交于
Don't report a 'selected' IBSS in sta_find_ibss when none was found. Signed-off-by: NVladimir Koutny <vlado@ksp.sk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Currently the ieee80211_hw->workqueue is flushed each time an interface is being removed. However most scheduled work is not interface specific but device specific, for example things like periodic work for link tuners. This patch will move the flush_workqueue() call to directly behind the call to ops->stop() to make sure the workqueue is only flushed when all interfaces are gone and there really shouldn't be any scheduled work in the drivers left. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Guy Cohen 提交于
Putting netif_carrier_on before configuring the driver/device with the new association state may cause a race (tx frames may be sent before configuration is done) Signed-off-by: NGuy Cohen <guy.cohen@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 7月, 2008 2 次提交
-
-
由 Johannes Berg 提交于
This patch reworks the mac80211 debug settings making them more focused and adding help text for those that didn't have one. It also removes a number of printks that can be triggered remotely and add no value, e.g. "too short deauthentication frame received - ignoring". If somebody really needs to debug that they should just add a monitor interface and look at the frames in wireshark. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This changes the RX path to no longer use function pointers for RX handlers but rather invoke them directly. If debugging is enabled, mark the RX handlers noinline because otherwise they all get inlined into ieee80211_invoke_rx_handlers() which makes it harder to see where a bug is. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-