And populate the gfx structures from it.

v2: update the structures updated by the table
v3: rework based on new table structure
v4: simplify things
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Tested-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new gpu info firmware to store gpu specific configuration
data.  This allows us to store hw constants in a unified place.

v2: adjust structure and elements
v3: further restructure
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Tested-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Smatch complains about a signedness bug here:

        vega10_hwmgr.c:4202 vega10_force_clock_level()
        warn: always true condition '(i >= 0) => (0-u32max >= 0)'

Fixes: 7b52db39 ("drm/amd/powerplay: fix bug sclk/mclk
                     level can't be set on vega10.")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[  338.384770] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  338.384817] IP: [<          (null)>]           (null)
[  338.385505] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
[  338.385950] Call Trace:
[  338.385993]  [<ffffffffa05d2313>] ? amdgpu_vm_flush+0x283/0x400 [amdgpu]
[  338.386025]  [<ffffffff811818d3>] ? printk+0x4d/0x4f
[  338.386074]  [<ffffffffa05d4906>] amdgpu_ib_schedule+0x4a6/0x4d0 [amdgpu]
[  338.386140]  [<ffffffffa0673e54>] amdgpu_job_run+0x64/0x180 [amdgpu]
[  338.386203]  [<ffffffffa0672e09>] amd_sched_main+0x2e9/0x4a0 [amdgpu]
[  338.386232]  [<ffffffff810bfce0>] ? prepare_to_wait_event+0x110/0x110
[  338.386295]  [<ffffffffa0672b20>] ? amd_sched_select_entity+0xe0/0xe0 [amdgpu]
[  338.386327]  [<ffffffff8109b423>] kthread+0xd3/0xf0
[  338.386349]  [<ffffffff8109b350>] ? kthread_park+0x60/0x60
[  338.386376]  [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30
[  338.386401] Code:  Bad RIP value.
[  338.386420] RIP  [<          (null)>]           (null)
[  338.386443]  RSP <ffffc90001bd7d40>
[  338.386458] CR2: 0000000000000000
[  338.398508] ---[ end trace 4c66fcdc74b9a0a2 ]---
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We end up reading the interrupt register for HPD5, and then writing it
to HPD6 which on systems without anything using HPD5 results in
permanently disabling hotplug on one of the display outputs after the
first time we acknowledge a hotplug interrupt from the GPU.

This code is really bad. But for now, let's just fix this. I will
hopefully have a large patch series to refactor all of this soon.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLyude <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even if the vblank period would allow it, it still seems to
be problematic on some cards.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Cc: stable@vger.kernel.org
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check to make sure the vblank period is long enough to support
mclk switching.

v2: drop needless initial assignment (Nils)

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Cc: stable@vger.kernel.org
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even if the vblank period would allow it, it still seems to
be problematic on some cards.

v2: fix logic inversion (Nils)

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Cc: stable@vger.kernel.org
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even if the vblank period would allow it, it still seems to
be problematic on some cards.

v2: fix logic inversion (Nils)

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Cc: stable@vger.kernel.org
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reinitializing the VM manager during suspend/resume is a very very bad
idea since all the VMs are still active and kicking.

This can lead to random VM faults after resume when new processes
become the same client ID assigned.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

As we can have multiple tx in the queue, with individual waiters, make
sure that all are woken when any state changes (so that we are sure the
right owner of the txmsg is woken).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170513105201.17658-2-chris@chris-wilson.co.uk

Both as an exercise to document that we are reading the state outside of
the appropriate mutex and to ensure that we only read the value once
before the multiple comparisons, use READ_ONCE.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170513105201.17658-1-chris@chris-wilson.co.uk

Add a new Kconfig option to enable/disable the extra warnings
from the vblank evade code. For now we'll keep the warning
about an actually missed vblank always enabled as that can have
an actual user visible impact. But if we miss the deadline
othrwise there's no real need to bother the user with that.
We'll want these warnings enabled during development however
so that we can catch regressions.

Based on the reports it looks like this is still very easy
to hit on SKL, so we have more work ahead of us to optimize
the crtiical section further.

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: NJens Axboe <axboe@kernel.dk>
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Fixes: e1edbd44 ("drm/i915: Complain if we take too long under vblank evasion.")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

These were ineffective due to touching the list without the alarm lock,
but should no longer be required.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

The idea here was to avoid having to "manually" program the HW if there's
a new earliest alarm.  This was lazy and bad, as it leads to loads of fun
races between inter-related callers (ie. therm).

Turns out, it's not so difficult after all.  Go figure ;)
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

At least therm/fantog "attempts" to work around this issue, which could
lead to corruption of the pending alarm list.

Fix it properly by not updating the timestamp without the lock held, or
trying to add an already pending alarm to the pending alarm list....
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

If the time to the next alarm is short enough, we could race with HW and
end up with an ~4 second delay until it triggers.

Fix this by checking again after we update HW.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Fixes a race where we can miss an alarm that triggers while we're already
processing previous alarms.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

object->engine cannot be NULL, it's either valid, or an error pointer.

This particular condition shouldn't actually be possible, but just in
case, we'll keep it.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This reg has moved on Pascal, and causes a bus fault.

We never use the value anyway, so just remove the read.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The DRM core used to only call prepare_fb/cleanup_fb() when a plane's
framebuffer changed, which achieved the desired effect.

It's apparently now up to the driver to decide on its own.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [4.11+]

This "optimisation" (which was originally meant to skip updating cursor
settings in the core channel on position-only updates) turned out to be
pointless in the final design of the code before it was merged.

Remove it completely, as it breaks other cases.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [4.10+]

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Use the new enums for setting and getting the fan control mode.
Fixes problems due to previous inconsistencies between enums.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the new enums for setting and getting the fan control mode.
Fixes problems due to previous inconsistencies between enums.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the new enums for setting and getting the fan control mode.
Fixes problems due to previous inconsistencies between enums.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make the interface consistent.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add common fan enums that can be used for both
powerplay and dpm.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add some new SMU messages.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The problem is that executing the jobs in the right order doesn't give you the right result
because consecutive jobs executed on the same engine are pipelined.
In other words job B does it buffer read before job A has written it's result.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to increment after the fence check.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to use the atomfirmware interface rather than atombios since
soc15 is atomfirmware based.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update the scratch reg for when the engine is hung.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Encountered a dozen of exact same backtraces when mesa's
pb_cache_release_all_buffers is called after that a gpu reset failed.

v2: Remove superfluous error message added in v1.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96271Signed-off-by: NJulien Isorce <jisorce@oblong.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In the previous patch we've implemented hwmode tracking a la i915 for
the vblank timestamp calculations. But that was just the basic
semantics, i915 has some nice sanity checks to make sure we keep
getting this right. Move them over too.

v2:
- WARN_ON_ONCE to avoid excessive spam (Ville)
- Really only WARN on atomic drivers.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-5-daniel.vetter@ffwll.ch

If we restrict this helper to only kms drivers (which is the case) we
can look up the correct mode easily ourselves. But it's a bit tricky:

- All legacy drivers look at crtc->hwmode. But that is updated already
  at the beginning of the modeset helper, which means when we disable
  a pipe. Hence the final timestamps might be a bit off. But since
  this is an existing bug I'm not going to change it, but just try to
  be bug-for-bug compatible with the current code. This only applies
  to radeon&amdgpu.

- i915 tries to get it perfect by updating crtc->hwmode when the pipe
  is off (i.e. vblank->enabled = false).

- All other atomic drivers look at crtc->state->adjusted_mode. Those
  that look at state->requested_mode simply don't adjust their mode,
  so it's the same. That has two problems: Accessing crtc->state from
  interrupt handling code is unsafe, and it's updated before we shut
  down the pipe. For nonblocking modesets it's even worse.

For atomic drivers try to implement what i915 does. To do that we add
a new hwmode field to the vblank structure, and update it from
drm_calc_timestamping_constants(). For atomic drivers that's called
from the right spot by the helper library already, so all fine. But
for safety let's enforce that.

For legacy driver this function is only called at the end (oh the
fun), which is broken, so again let's not bother and just stay
bug-for-bug compatible.

The  benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos
directly to implement ->get_vblank_timestamp in every driver, deleting
a lot of code.

v2: Completely new approach, trying to mimick the i915 solution.

v3: Fixup kerneldoc.

v4: Drop the WARN_ON to check that the vblank is off, atomic helpers
currently unconditionally call this. Recomputing the same stuff should
be harmless.

v5: Fix typos and move misplaced hunks to the right patches (Neil).

v6: Undo hunk movement (kbuild).

Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-4-daniel.vetter@ffwll.ch

It's overkill to have a flag parameter which is essentially used just
as a boolean. This takes care of core + adjusting drivers.

Adjusting the scanout position callback is a bit harder, since radeon
also supplies it's own driver-private flags in there.

v2: Fixup misplaced hunks (Neil).

v3: kbuild says v1 was better ...

Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-2-daniel.vetter@ffwll.ch

There's really no reason for anything more:
- Calling this while the crtc vblank stuff isn't set up is a driver
  bug. Those places alrready DRM_ERROR.
- Calling this when the crtc is off is either a driver bug (calling
  drm_crtc_handle_vblank at the wrong time) or a core bug (for
  anything else). Again, we DRM_ERROR.
- EINVAL is checked at higher levels already, and if we'd use struct
  drm_crtc * instead of (dev, pipe) it would be real obvious that
  those are again core bugs.

The only valid failure mode is crap hardware that couldn't sample a
useful timestamp, to ask the core to just grab a not-so-accurate
timestamp. Bool is perfectly fine for that.

v2: Also fix up the one caller, I lost that in the shuffling (Jani).

v3: Fixup commit message (Neil).

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-1-daniel.vetter@ffwll.ch

With Laura's introduction of the fake platform device for importing
dmabuf, we add a second static that is logically tied to the vgem_device.
Convert vgem over to using the struct drm_device subclassing, so that
the platform device is stored inside its owner.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170508132228.9509-1-chris@chris-wilson.co.uk