1. 12 6月, 2009 4 次提交
    • C
      affs: add ->sync_fs · e2896436
      Christoph Hellwig 提交于
      Add a ->sync_fs method for data integrity syncs.  Factor out common code
      between affs_put_super, affs_write_super and the new affs_sync_fs into
      a helper.
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      e2896436
    • A
      Push BKL down into ->remount_fs() · 337eb00a
      Alessio Igor Bogani 提交于
      [xfs, btrfs, capifs, shmem don't need BKL, exempt]
      Signed-off-by: NAlessio Igor Bogani <abogani@texware.it>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      337eb00a
    • C
      ->write_super lock_super pushdown · ebc1ac16
      Christoph Hellwig 提交于
      Push down lock_super into ->write_super instances and remove it from the
      caller.
      
      Following filesystem don't need ->s_lock in ->write_super and are skipped:
      
       * bfs, nilfs2 - no other uses of s_lock and have internal locks in
      	->write_super
       * ext2 - uses BKL in ext2_write_super and has internal calls without s_lock
       * reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in
       	->write_super
       * xfs - no other uses of s_lock and uses internal lock (buffer lock on
      	superblock buffer) to serialize ->write_super.  Also xfs_fs_write_super
      	is superflous and will go away in the next merge window
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      ebc1ac16
    • C
      push BKL down into ->put_super · 6cfd0148
      Christoph Hellwig 提交于
      Move BKL into ->put_super from the only caller.  A couple of
      filesystems had trivial enough ->put_super (only kfree and NULLing of
      s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
      hugetlbfs, omfs, qnx4, shmem, all others got the full treatment.  Most
      of them probably don't need it, but I'd rather sort that out individually.
      Preferably after all the other BKL pushdowns in that area.
      
      [AV: original used to move lock_super() down as well; these changes are
      removed since we don't do lock_super() at all in generic_shutdown_super()
      now]
      [AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      6cfd0148
  2. 09 5月, 2009 1 次提交
    • A
      Fix races around the access to ->s_options · 2a32cebd
      Al Viro 提交于
      Put generic_show_options read access to s_options under rcu_read_lock,
      split save_mount_options() into "we are setting it the first time"
      (uses in foo_fill_super()) and "we are relacing and freeing the old one",
      synchronize_rcu() before kfree() in the latter.
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      2a32cebd
  3. 03 4月, 2009 1 次提交
  4. 14 11月, 2008 1 次提交
  5. 14 10月, 2008 1 次提交
  6. 27 7月, 2008 2 次提交
  7. 07 5月, 2008 1 次提交
  8. 29 4月, 2008 1 次提交
  9. 09 2月, 2008 1 次提交
  10. 08 2月, 2008 1 次提交
  11. 17 10月, 2007 1 次提交
  12. 20 7月, 2007 1 次提交
    • P
      mm: Remove slab destructors from kmem_cache_create(). · 20c2df83
      Paul Mundt 提交于
      Slab destructors were no longer supported after Christoph's
      c59def9f change. They've been
      BUGs for both slab and slub, and slob never supported them
      either.
      
      This rips out support for the dtor pointer from kmem_cache_create()
      completely and fixes up every single callsite in the kernel (there were
      about 224, not including the slab allocator definitions themselves,
      or the documentation references).
      Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
      20c2df83
  13. 22 5月, 2007 1 次提交
    • A
      Detach sched.h from mm.h · e8edc6e0
      Alexey Dobriyan 提交于
      First thing mm.h does is including sched.h solely for can_do_mlock() inline
      function which has "current" dereference inside. By dealing with can_do_mlock()
      mm.h can be detached from sched.h which is good. See below, why.
      
      This patch
      a) removes unconditional inclusion of sched.h from mm.h
      b) makes can_do_mlock() normal function in mm/mlock.c
      c) exports can_do_mlock() to not break compilation
      d) adds sched.h inclusions back to files that were getting it indirectly.
      e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
         getting them indirectly
      
      Net result is:
      a) mm.h users would get less code to open, read, preprocess, parse, ... if
         they don't need sched.h
      b) sched.h stops being dependency for significant number of files:
         on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
         after patch it's only 3744 (-8.3%).
      
      Cross-compile tested on
      
      	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
      	alpha alpha-up
      	arm
      	i386 i386-up i386-defconfig i386-allnoconfig
      	ia64 ia64-up
      	m68k
      	mips
      	parisc parisc-up
      	powerpc powerpc-up
      	s390 s390-up
      	sparc sparc-up
      	sparc64 sparc64-up
      	um-x86_64
      	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig
      
      as well as my two usual configs.
      Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e8edc6e0
  14. 17 5月, 2007 1 次提交
    • C
      Remove SLAB_CTOR_CONSTRUCTOR · a35afb83
      Christoph Lameter 提交于
      SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Jens Axboe <jens.axboe@oracle.com>
      Cc: Steven French <sfrench@us.ibm.com>
      Cc: Michael Halcrow <mhalcrow@us.ibm.com>
      Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
      Cc: Miklos Szeredi <miklos@szeredi.hu>
      Cc: Steven Whitehouse <swhiteho@redhat.com>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Dave Kleikamp <shaggy@austin.ibm.com>
      Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
      Cc: "J. Bruce Fields" <bfields@fieldses.org>
      Cc: Anton Altaparmakov <aia21@cantab.net>
      Cc: Mark Fasheh <mark.fasheh@oracle.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Jan Kara <jack@ucw.cz>
      Cc: David Chinner <dgc@sgi.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a35afb83
  15. 08 5月, 2007 1 次提交
    • C
      slab allocators: Remove SLAB_DEBUG_INITIAL flag · 50953fe9
      Christoph Lameter 提交于
      I have never seen a use of SLAB_DEBUG_INITIAL.  It is only supported by
      SLAB.
      
      I think its purpose was to have a callback after an object has been freed
      to verify that the state is the constructor state again?  The callback is
      performed before each freeing of an object.
      
      I would think that it is much easier to check the object state manually
      before the free.  That also places the check near the code object
      manipulation of the object.
      
      Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was
      compiled with SLAB debugging on.  If there would be code in a constructor
      handling SLAB_DEBUG_INITIAL then it would have to be conditional on
      SLAB_DEBUG otherwise it would just be dead code.  But there is no such code
      in the kernel.  I think SLUB_DEBUG_INITIAL is too problematic to make real
      use of, difficult to understand and there are easier ways to accomplish the
      same effect (i.e.  add debug code before kfree).
      
      There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be
      clear in fs inode caches.  Remove the pointless checks (they would even be
      pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors.
      
      This is the last slab flag that SLUB did not support.  Remove the check for
      unimplemented flags from SLUB.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      50953fe9
  16. 21 2月, 2007 1 次提交
  17. 13 2月, 2007 1 次提交
  18. 08 12月, 2006 2 次提交
  19. 27 9月, 2006 2 次提交
  20. 24 9月, 2006 1 次提交
  21. 26 6月, 2006 1 次提交
  22. 23 6月, 2006 2 次提交
    • D
      [PATCH] VFS: Permit filesystem to perform statfs with a known root dentry · 726c3342
      David Howells 提交于
      Give the statfs superblock operation a dentry pointer rather than a superblock
      pointer.
      
      This complements the get_sb() patch.  That reduced the significance of
      sb->s_root, allowing NFS to place a fake root there.  However, NFS does
      require a dentry to use as a target for the statfs operation.  This permits
      the root in the vfsmount to be used instead.
      
      linux/mount.h has been added where necessary to make allyesconfig build
      successfully.
      
      Interest has also been expressed for use with the FUSE and XFS filesystems.
      Signed-off-by: NDavid Howells <dhowells@redhat.com>
      Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
      Cc: Nathan Scott <nathans@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      726c3342
    • D
      [PATCH] VFS: Permit filesystem to override root dentry on mount · 454e2398
      David Howells 提交于
      Extend the get_sb() filesystem operation to take an extra argument that
      permits the VFS to pass in the target vfsmount that defines the mountpoint.
      
      The filesystem is then required to manually set the superblock and root dentry
      pointers.  For most filesystems, this should be done with simple_set_mnt()
      which will set the superblock pointer and then set the root dentry to the
      superblock's s_root (as per the old default behaviour).
      
      The get_sb() op now returns an integer as there's now no need to return the
      superblock pointer.
      
      This patch permits a superblock to be implicitly shared amongst several mount
      points, such as can be done with NFS to avoid potential inode aliasing.  In
      such a case, simple_set_mnt() would not be called, and instead the mnt_root
      and mnt_sb would be set directly.
      
      The patch also makes the following changes:
      
       (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
           pointer argument and return an integer, so most filesystems have to change
           very little.
      
       (*) If one of the convenience function is not used, then get_sb() should
           normally call simple_set_mnt() to instantiate the vfsmount. This will
           always return 0, and so can be tail-called from get_sb().
      
       (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
           dcache upon superblock destruction rather than shrink_dcache_anon().
      
           This is required because the superblock may now have multiple trees that
           aren't actually bound to s_root, but that still need to be cleaned up. The
           currently called functions assume that the whole tree is rooted at s_root,
           and that anonymous dentries are not the roots of trees which results in
           dentries being left unculled.
      
           However, with the way NFS superblock sharing are currently set to be
           implemented, these assumptions are violated: the root of the filesystem is
           simply a dummy dentry and inode (the real inode for '/' may well be
           inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
           with child trees.
      
           [*] Anonymous until discovered from another tree.
      
       (*) The documentation has been adjusted, including the additional bit of
           changing ext2_* into foo_* in the documentation.
      
      [akpm@osdl.org: convert ipath_fs, do other stuff]
      Signed-off-by: NDavid Howells <dhowells@redhat.com>
      Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
      Cc: Nathan Scott <nathans@sgi.com>
      Cc: Roland Dreier <rolandd@cisco.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      454e2398
  23. 24 3月, 2006 2 次提交
    • P
      [PATCH] cpuset memory spread: slab cache format · fffb60f9
      Paul Jackson 提交于
      Rewrap the overly long source code lines resulting from the previous
      patch's addition of the slab cache flag SLAB_MEM_SPREAD.  This patch
      contains only formatting changes, and no function change.
      Signed-off-by: NPaul Jackson <pj@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      fffb60f9
    • P
      [PATCH] cpuset memory spread: slab cache filesystems · 4b6a9316
      Paul Jackson 提交于
      Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
      memory spreading.
      
      If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
      in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
      from such a slab cache, the allocations are spread evenly over all the
      memory nodes (task->mems_allowed) allowed to that task, instead of favoring
      allocation on the node local to the current cpu.
      
      The following inode and similar caches are marked SLAB_MEM_SPREAD:
      
          file                               cache
          ====                               =====
          fs/adfs/super.c                    adfs_inode_cache
          fs/affs/super.c                    affs_inode_cache
          fs/befs/linuxvfs.c                 befs_inode_cache
          fs/bfs/inode.c                     bfs_inode_cache
          fs/block_dev.c                     bdev_cache
          fs/cifs/cifsfs.c                   cifs_inode_cache
          fs/coda/inode.c                    coda_inode_cache
          fs/dquot.c                         dquot
          fs/efs/super.c                     efs_inode_cache
          fs/ext2/super.c                    ext2_inode_cache
          fs/ext2/xattr.c (fs/mbcache.c)     ext2_xattr
          fs/ext3/super.c                    ext3_inode_cache
          fs/ext3/xattr.c (fs/mbcache.c)     ext3_xattr
          fs/fat/cache.c                     fat_cache
          fs/fat/inode.c                     fat_inode_cache
          fs/freevxfs/vxfs_super.c           vxfs_inode
          fs/hpfs/super.c                    hpfs_inode_cache
          fs/isofs/inode.c                   isofs_inode_cache
          fs/jffs/inode-v23.c                jffs_fm
          fs/jffs2/super.c                   jffs2_i
          fs/jfs/super.c                     jfs_ip
          fs/minix/inode.c                   minix_inode_cache
          fs/ncpfs/inode.c                   ncp_inode_cache
          fs/nfs/direct.c                    nfs_direct_cache
          fs/nfs/inode.c                     nfs_inode_cache
          fs/ntfs/super.c                    ntfs_big_inode_cache_name
          fs/ntfs/super.c                    ntfs_inode_cache
          fs/ocfs2/dlm/dlmfs.c               dlmfs_inode_cache
          fs/ocfs2/super.c                   ocfs2_inode_cache
          fs/proc/inode.c                    proc_inode_cache
          fs/qnx4/inode.c                    qnx4_inode_cache
          fs/reiserfs/super.c                reiser_inode_cache
          fs/romfs/inode.c                   romfs_inode_cache
          fs/smbfs/inode.c                   smb_inode_cache
          fs/sysv/inode.c                    sysv_inode_cache
          fs/udf/super.c                     udf_inode_cache
          fs/ufs/super.c                     ufs_inode_cache
          net/socket.c                       sock_inode_cache
          net/sunrpc/rpc_pipe.c              rpc_inode_cache
      
      The choice of which slab caches to so mark was quite simple.  I marked
      those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
      inode_cache, and buffer_head, which were marked in a previous patch.  Even
      though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
      potentially large file system i/o related slab caches as we need for memory
      spreading.
      
      Given that the rule now becomes "wherever you would have used a
      SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
      the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
      Future file system writers will just copy one of the existing file system
      slab cache setups and tend to get it right without thinking.
      Signed-off-by: NPaul Jackson <pj@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      4b6a9316
  24. 07 11月, 2005 1 次提交
  25. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds 提交于
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      
      Let it rip!
      1da177e4