Dump out the DP HDR Metadata Infoframe SDP in the normal crtc state dump.

HDMI Dynamic Range and Mastering (DRM) infoframe and DP HDR Metadata
Infoframe SDP use the same member variable in infoframes of crtc state.
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-6-gwan-gyeong.mun@intel.com

Dump out the HDMI Dynamic Range and Mastering (DRM) infoframe in the
normal crtc state dump.
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-5-gwan-gyeong.mun@intel.com

When receiving video it is very useful to be able to log DP VSC SDP.
This greatly simplifies debugging.

v2: Minor style fix
v3: Move logging functions to drm core [Jani N]
v5: Rebased
v10: Rebased
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-4-gwan-gyeong.mun@intel.com

It adds code to read the DP SDPs from the video DIP and unpack them into
the crtc state.

It adds routines that read out DP VSC SDP and DP HDR Metadata Infoframe SDP
In order to unpack DP VSC SDP, it adds intel_dp_vsc_sdp_unpack() function.
It follows DP 1.4a spec. [Table 2-116: VSC SDP Header Bytes] and
[Table 2-117: VSC SDP Payload for DB16 through DB18]

In order to unpack DP HDR Metadata Infoframe SDP, it adds
intel_dp_hdr_metadata_infoframe_sdp_unpack(). And it follows DP 1.4a spec.
([Table 2-125: INFOFRAME SDP v1.2 Header Bytes] and
[Table 2-126: INFOFRAME SDP v1.2 Payload Data Bytes - DB0 through DB31])
and CTA-861-G spec. [Table-42 Dynamic Range and Mastering InfoFrame].

A naming rule and style of intel_read_dp_sdp() function references
intel_read_infoframe() function of intel_hdmi.c

v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v5: Addressed review comments from Uma
  - Polish commit message and comments
  - Combine the if checks of sdp.HB2 and sdp.HB3
  - Add 6bpc to unpacking of VSC SDP
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-3-gwan-gyeong.mun@intel.com

It adds an unpack only function for DRM infoframe for dynamic range and
mastering infoframe readout.
It unpacks the information data block contained in the binary buffer into
a structured frame of the HDMI Dynamic Range and Mastering (DRM)
information frame.

In contrast to hdmi_drm_infoframe_unpack() function, it does not verify
a checksum.

It can be used for unpacking a DP HDR Metadata Infoframe SDP case.
DP HDR Metadata Infoframe SDP uses the same Dynamic Range and Mastering
(DRM) information (CTA-861-G spec.) such as HDMI DRM infoframe.
But DP SDP header and payload structure are different from HDMI DRM
Infoframe. Therefore unpacking DRM infoframe for DP requires skipping of
a verifying checksum.

v9: Add clear comments to hdmi_drm_infoframe_unpack_only() and
    hdmi_drm_infoframe_unpack() (Laurent Pinchart)
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-2-gwan-gyeong.mun@intel.com

The second try at staging the transfer of the breadcrumb. In part one,
we realised we could not simply move to the second engine as we were
only holding the breadcrumb lock on the first. So in commit 6c81e21a
("drm/i915/gt: Stage the transfer of the virtual breadcrumb"), we
removed it from the first engine and marked up this request to reattach
the signaling on the new engine. However, this failed to take into
account that we only attach the breadcrumb if the new request is added
at the start of the queue, which if we are transferring, it is because
we know there to be a request to be signaled (and hence we would not be
attached).

In this attempt, we try to transfer the completed requests to the
irq_worker on its rq->engine->breadcrumbs. This preserves the coupling
between the rq and its breadcrumbs, so that
i915_request_cancel_breadcrumb() does not attempt to manipulate the list
under the wrong lock.

v2: Code sharing is fun.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1862
Fixes: 6c81e21a ("drm/i915/gt: Stage the transfer of the virtual breadcrumb")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-1-chris@chris-wilson.co.uk

While this does not appear to fix any issues, the backend itself knows
when it wants to emit a breadcrumb, so let it make the final call.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-16-chris@chris-wilson.co.uk

By providing the default values configured into the kernel via sysfs, it
is much more convenient for userspace to restore those sane defaults, or
at least know what are considered good baseline. This is useful, for
example, to cleanup after any failed userspace prior to commencing new
jobs.

/sys/class/drm/card0/engine/rcs0/
├── capabilities
├── class
├── .defaults
│   ├── heartbeat_interval_ms
│   ├── max_busywait_duration_ns
│   ├── preempt_timeout_ms
│   ├── stop_timeout_ms
│   └── timeslice_duration_ms
├── heartbeat_interval_ms
├── instance
├── known_capabilities
├── max_busywait_duration_ns
├── mmio_base
├── name
├── preempt_timeout_ms
├── stop_timeout_ms
└── timeslice_duration_ms
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMaciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514062905.28668-1-chris@chris-wilson.co.uk

Now that we have fast timeslicing on semaphores, we no longer need to
prioritise none-semaphore work as we will yield any work blocked on a
semaphore to the next in the queue. Previously with no timeslicing,
blocking on the semaphore caused extremely bad scheduling with multiple
clients utilising multiple rings. Now, there is no impact and we can
remove the complication.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513173504.28322-1-chris@chris-wilson.co.uk

These were used to set various timeouts for the reset procedure
(deciding when the engine was dead, and even if the reset itself was not
making forward progress). No longer used.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMaciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-14-chris@chris-wilson.co.uk

The initial-breadcrumb is used to mark the end of the awaiting and the
beginning of the user payload. We verify that we do not start the user
payload before all signaler are completed, checking our semaphore setup
by looking for the initial breadcrumb being written too early. We also
want to ensure that we do not add semaphore waits after we have already
closed the semaphore section, an issue for later deferred waits.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513165937.9508-2-chris@chris-wilson.co.uk

Since there can only be one of in_fence/exec_fence, just use the single
in_fence local.

v2: Consolidate lookup
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513180937.28992-1-chris@chris-wilson.co.uk

When building with clang:

 drivers/gpu/drm/i915/gt/gen8_ppgtt.c:392:24: warning: duplicate
 'inline' declaration specifier [-Wduplicate-decl-specifier]
 declaration specifier [-Wduplicate-decl-specifier]
 static __always_inline inline void
                        ^
 include/linux/compiler_types.h:138:16: note: expanded from macro
 'inline'
 #define inline inline __gnu_inline __inline_maybe_unused notrace
                ^
 1 warning generated.

__always_inline is defined as 'inline __attribute__((__always_inline))'
so we do not need to specify it twice.

Fixes: 84eac0c6 ("drm/i915/gt: Force pte cacheline to main memory")
Link: https://github.com/ClangBuiltLinux/linux/issues/1024Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513182340.3968668-1-natechancellor@gmail.com

It is possible for a residual tasklet to be pending execution as we
resume (whether that's some prior test kicking off the tasklet, or if we
are in a suspend/resume stress test). As such, we do not want that
tasklet to execute in the middle of our sanitization, such that it sees
the poisoned state. For example,

<4>[  449.386553] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[  449.386555] CPU: 1 PID: 5115 Comm: i915_selftest Tainted: G     U  W         5.7.0-rc4-CI-CI_DRM_8472+ #1
<4>[  449.386556] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4>[  449.386585] RIP: 0010:process_csb+0x6bf/0x830 [i915]
<4>[  449.386588] Code: 00 48 c7 c2 10 bc 4c a0 48 c7 c7 d4 75 34 a0 e8 87 0e e6 e0 bf 01 00 00 00 e8 9d e0 e5 e0 31 f6 bf 09 00 00 00 e8 e1 ba d6 e0 <0f> 0b 8b 87 10 05 00 00 85 c0 0f 85 5f f9 ff ff 48 c7 c1 70 a5 4f
<4>[  449.386591] RSP: 0018:ffffc90000170ea0 EFLAGS: 00010297
<4>[  449.386594] RAX: 0000000080000101 RBX: 0000000000000000 RCX: 0000000000000000
<4>[  449.386596] RDX: ffff88849d5bc040 RSI: 0000000000000000 RDI: 0000000000000009
<4>[  449.386598] RBP: ffffc90000170f00 R08: 0000000000000000 R09: 0000000000000000
<4>[  449.386600] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88843ccea018
<4>[  449.386602] R13: ffff88843ccea658 R14: ffff88843ccea640 R15: ffff88843ccea000
<4>[  449.386605] FS:  00007f826a813300(0000) GS:ffff88849fe80000(0000) knlGS:0000000000000000
<4>[  449.386607] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  449.386609] CR2: 0000560366b94280 CR3: 000000048ba02002 CR4: 0000000000760ee0
<4>[  449.386611] PKRU: 55555554
<4>[  449.386613] Call Trace:
<4>[  449.386616]  <IRQ>
<4>[  449.386646]  ? execlists_submission_tasklet+0xcf/0x140 [i915]
<4>[  449.386674]  execlists_submission_tasklet+0x2f/0x140 [i915]
<4>[  449.386679]  tasklet_action_common.isra.16+0x6c/0x1c0
<4>[  449.386684]  __do_softirq+0xdf/0x49e
<4>[  449.386687]  irq_exit+0xba/0xc0
<4>[  449.386690]  smp_apic_timer_interrupt+0xb7/0x280
<4>[  449.386693]  apic_timer_interrupt+0xf/0x20
<4>[  449.386695]  </IRQ>
<4>[  449.386698] RIP: 0010:_raw_spin_unlock_irqrestore+0x49/0x60
<4>[  449.386701] Code: c7 02 75 1f 53 9d e8 26 ab 75 ff bf 01 00 00 00 e8 7c a3 69 ff 65 8b 05 7d 9b 5c 7e 85 c0 74 0c 5b 5d c3 e8 09 aa 75 ff 53 9d <eb> df e8 ca 39 5b ff 5b 5d c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00
<4>[  449.386703] RSP: 0018:ffffc90000a6b950 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13
<4>[  449.386706] RAX: 0000000080000001 RBX: 0000000000000202 RCX: 0000000000000000
<4>[  449.386708] RDX: ffff88849d5bc040 RSI: ffff88849d5bc900 RDI: ffffffff82386f12
<4>[  449.386710] RBP: ffff88847d400f00 R08: ffff88849d5bc900 R09: 0000000000000000
<4>[  449.386712] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffff0b0b
<4>[  449.386714] R13: 000000000000000c R14: ffff88847d40bf70 R15: ffff88847d40cef8
<4>[  449.386742]  reset_csb_pointers+0x59/0x140 [i915]
<4>[  449.386769]  execlists_sanitize+0x3e/0x60 [i915]
<4>[  449.386797]  gt_sanitize+0xd6/0x260 [i915]

As part of the reset preparation, engine->reset.prepare() prevents the
tasklet from running, so pull the sanitization inside the critical
section for reset.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1812
Fixes: 23122a4d ("drm/i915/gt: Scrub execlists state on resume")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513122826.27484-1-chris@chris-wilson.co.uk

Seems that only skl needs to have SAGV turned off
for multipipe scenarios, so lets do it this way.

If anything blows up - we can always revert this patch.

v2: Changed if condition to look better (Ville).
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: wrapped long line to appease checkpatch]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513093816.11466-4-stanislav.lisovskiy@intel.com

Introduce platform dependent SAGV checking in
combination with bandwidth state pipe SAGV mask.

This is preparation to adding TGL support, which
requires different way of SAGV checking.

v2, v3, v4, v5, v6: Fix rebase conflict

v7: - Nuke icl specific function, use skl
      for icl as well, gen specific active_pipes
      check to be added in the next patch(Ville)

v8: - Use more generic intel_crtc_can_enable_sagv
      for checking(Ville)
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513093816.11466-3-stanislav.lisovskiy@intel.com

For future Gen12 SAGV implementation we need to
seemlessly alter wm levels calculated, depending
on whether we are allowed to enable SAGV or not.

So this accessor will give additional flexibility
to do that.

Currently this accessor is still simply working
as "pass-through" function. This will be changed
in next coming patches from this series.

v2: - plane_id -> plane->id(Ville Syrjälä)
    - Moved wm_level var to have more local scope
      (Ville Syrjälä)
    - Renamed yuv to color_plane(Ville Syrjälä) in
      skl_plane_wm_level

v3: - plane->id -> plane_id(this time for real, Ville Syrjälä)
    - Changed colorplane id type from boolean to int as index
      (Ville Syrjälä)
    - Moved crtc_state param so that it is first now
      (Ville Syrjälä)
    - Moved wm_level declaration to tigher scope in
      skl_write_plane_wm(Ville Syrjälä)

v4: - Started to use enum values for color plane
    - Do sizeof for a type what we are memset'ing
    - Zero out wm_uv as well(Ville Syrjälä)

v5: - Fixed rebase conflict caused by COLOR_PLANE_*
      enum removal

v6: - Do not use skl_plane_wm_level accessor in skl_allocate_pipe_ddb

v7: - Get rid of wm_uv, which is not used in skl_plane_write_wm(Ville)
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513093816.11466-2-stanislav.lisovskiy@intel.com

Upon gt resume, we first poison then sanitize the engine. However, our
testing shows that gen9 will very rarely retain the poisoned value from
the HWSP mappings of the execlists status registers. This suggests that
it is reading back from the HWSP, so rejig the register reset.

v2: Maybe RING_CONTEXT_STATUS_PTR is write masked. It is.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1812Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513100120.11617-1-chris@chris-wilson.co.uk

This w/a is fixed in B0 stepping and needs to be restricted for
A0 stepping only.
Bspec: 33451
Signed-off-by: NSwathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512180050.6785-1-swathi.dhanavanthri@intel.com

i915_gem_evict_something() is charged with finding a slot within the GTT
that we may reuse. Since our goal is not to stall, we first look for a
slot that only overlaps idle vma. To this end, on the first pass we move
any active vma to the end of the search list. However, we only stopped
moving active vma after we see the first active vma twice. If during the
search, that first active vma completed, we would not notice and keep on
extending the search list.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1746
Fixes: 2850748e ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Fixes: b1e3177b ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200509115217.26853-1-chris@chris-wilson.co.uk

This reverts commit 0b718ba1.

There are still some residual issues with asynchronous binding and
execution, but since commit 92581f9f ("drm/i915: Immediately execute
the fenced work") we prefer not to use asynchronous binds, and the
remaining issues do not seem restricted to Cherryview [at least the ones
seen over a few dozen CI runs, less frequent issues are sure to be
discovered!]

These issues seem to be mitigated, if not eliminated entirely, by the
previous commit 84eac0c6 ("drm/i915/gt: Force pte cacheline to main
memory").
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200510102431.21959-3-chris@chris-wilson.co.uk

We have problems of tgl not seeing a valid pte entry when iommu is
enabled. Add heavy handed flushing of entry modification by flushing the
cpu, cacheline and then wcb. This forces the pte out to main memory past
this point regarless of promises of coherency.

This is an evolution of an experimental patch from Chris Wilson of adding
wmb for coherent partners, by adding a clflush to force the cache->memory
step.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1840
Testcase: igt/gem_exec_fence/parallel
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511160803.15407-1-mika.kuoppala@linux.intel.com

It has been unused since commit ccb2acea ("drm/i915: use vfuncs for
reg_read/write_fw_domains").
Signed-off-by: NPascal Terjan <pterjan@google.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200510212521.128869-1-pterjan@google.com

Be consistent, and even when we know we had used a WC, flush the mapped
object after writing into it. The flush understands the mapping type and
will only clflush if !I915_MAP_WC, but will always insert a wmb [sfence]
so that we can be sure that all writes are visible.

v2: Add the unconditional wmb so we are know that we always flush the
writes to memory/HW at that point.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511141304.599-1-chris@chris-wilson.co.uk

Be consistent and ensure that we always emit the asynchronous waits
prior to issuing instructions that use the address. This ensures that if
we do emit GPU commands to do the await, they are before our use!
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200510102431.21959-1-chris@chris-wilson.co.uk

Get rid of several platform specific variants of
intel_digital_port_connected() and just use the ISR bits we've
stashed away.

v2: Duplicate stuff to avoid exposing platform specific
    functions across files (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311155422.3043-4-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Instead of constnantly having to figure out which hpd status bit
array to use let's store them under dev_priv.

Should perhaps take this further and stash even more stuff to
make the hpd handling more abstract yet.

v2: Remeber cnp (Imre)
    Add MISSING_CASE() for unknown PCHs (Imre)

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507114808.6150-1-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Let's get rid of the platform if ladders in
intel_digital_port_connected() and make it a vfunc. Now the if
ladders are at the encoder initialization which makes them a bit
less convoluted.

v2: Add forward decl for intel_encoder in intel_tc.h
v3: Duplicate stuff to avoid exposing platform specific
    functions across files (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311155422.3043-2-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

GLK wants the +1 adjustement for the "blocks per line" value
for x-tile/y-tile, just like cnl+.

Also the x-tile and linear cases are almost identical. The only
difference is this +1 which is always done for glk+, and only
done for linear on skl/bxt. Let's unify it to a single branch
with a special case for the +1, just like we do for y-tile.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430125822.21985-1-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>

The correct sequence according to bspec is to wait for the ACT sent
status before we turn on the pipe. Make it so.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507144125.2458-1-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Just tidy up the return handling for completed dma-fences. While it may
return errors for invalid fence, we already know that we have a good
fence and the only error will be an already signaled fence.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511075722.13483-5-chris@chris-wilson.co.uk

Commit fb5970da ("drm/i915/gt: Use the kernel_context to measure the
breadcrumb size") removed the last external user for intel_timeline_init.
Mark it static.
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511102201.9275-1-mika.kuoppala@linux.intel.com

Since we are using bitops on context_tag to allow us to reserve and
release inflight tags concurrently, the scan for the next bit is
intentionally racy.

[  516.446854] BUG: KCSAN: data-race in execlists_schedule_in.isra.0 [i915] / execlists_schedule_out [i915]
[  516.446874]
[  516.446886] write (marked) to 0xffff8881f7644048 of 8 bytes by interrupt on cpu 2:
[  516.447076]  execlists_schedule_out+0x538/0x6a0 [i915]
[  516.447263]  process_csb+0x10b/0x3d0 [i915]
[  516.447449]  execlists_submission_tasklet+0x30/0x170 [i915]
[  516.447468]  tasklet_action_common.isra.0+0x42/0x90
[  516.447484]  __do_softirq+0xc8/0x206
[  516.447498]  irq_exit+0xcd/0xe0
[  516.447516]  do_IRQ+0x44/0xc0
[  516.447535]  ret_from_intr+0x0/0x1c
[  516.447550]  cpuidle_enter_state+0x199/0x400
[  516.447572]  cpuidle_enter+0x50/0x90
[  516.447587]  do_idle+0x197/0x1e0
[  516.447600]  cpu_startup_entry+0x14/0x20
[  516.447619]  start_secondary+0xf9/0x130
[  516.447643]  secondary_startup_64+0xa4/0xb0
[  516.447655]
[  516.447671] read to 0xffff8881f7644048 of 8 bytes by task 460 on cpu 1:
[  516.447863]  execlists_schedule_in.isra.0+0x3cf/0x5a0 [i915]
[  516.448064]  execlists_dequeue+0xf8f/0x1690 [i915]
[  516.448252]  __execlists_submission_tasklet+0x48/0x60 [i915]
[  516.448440]  execlists_submit_request+0x2e2/0x310 [i915]
[  516.448634]  submit_notify+0x8f/0xc8 [i915]
[  516.448820]  __i915_sw_fence_complete+0x61/0x420 [i915]
[  516.449005]  i915_sw_fence_complete+0x58/0x80 [i915]
[  516.449208]  i915_sw_fence_commit+0x16/0x20 [i915]
[  516.449399]  __i915_request_queue+0x60/0x70 [i915]
[  516.449590]  i915_gem_do_execbuffer+0x33f1/0x4a00 [i915]
[  516.449782]  i915_gem_execbuffer2_ioctl+0x2a2/0x550 [i915]
[  516.449800]  drm_ioctl_kernel+0xe9/0x130
[  516.449814]  drm_ioctl+0x27d/0x45e
[  516.449827]  ksys_ioctl+0x89/0xb0
[  516.449842]  __x64_sys_ioctl+0x42/0x60
[  516.449864]  do_syscall_64+0x6e/0x2c0
[  516.449878]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511075722.13483-1-chris@chris-wilson.co.uk

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507185408.GA14561@embeddedor

Expose the hardcoded timeout for unsignaled foreign fences as a Kconfig
option, primarily to allow brave systems to disable the timeout and
solely rely on correct signaling.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200509105021.12542-1-chris@chris-wilson.co.uk

The downside of using semaphores is that we lose metadata passing
along the signaling chain. This is particularly nasty when we
need to pass along a fatal error such as EFAULT or EDEADLK. For
fatal errors we want to scrub the request before it is executed,
which means that we cannot preload the request onto HW and have
it wait upon a semaphore.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508092933.738-3-chris@chris-wilson.co.uk

To allow faster engine to engine synchronization, peel the layer of
dma-fence-chain to expose potential i915 fences so that the
i915_request code can emit HW semaphore wait/signal operations in the
ring which is faster than waking up the host to submit unblocked
workloads after interrupt notification.

This is similar to the peeling we do for e.g. dma_fence_array.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508185448.29709-1-chris@chris-wilson.co.uk

The kernel_context does not use initial-breadcrumbs, so when we ask if
its requests have started we do so by comparing against the completion
seqno of the previous request. This is very imprecise, not precise
enough for the defer_request assertion.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1847Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508104220.9872-1-chris@chris-wilson.co.uk

As a means for a small code consolidation, but primarily to start
thinking more carefully about internal-vs-external linkage, pull the
pair of i915_sw_fence_await_dma_fence() calls into a common routine.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508092933.738-2-chris@chris-wilson.co.uk

While we ordinarily do not skip submit-fences due to the accompanying
hook that we want to callback on execution, a submit-fence on the same
timeline is meaningless.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508092933.738-1-chris@chris-wilson.co.uk